backup to usb

Similar Questions

• Backup on USB fails for lack of space; but it's a blank disk and there is no files on it!

  I have improved my NV + v1 (4.1.14) with 4 x 2 TB drives and I met the 4 k block size problem. So I'll try my backup device so that I can factory reset it.

  The current size of the volume is 1.3 to, so I took on one of the 2 TB drives to use as a backup via USB. 1.3 TB should fit easily in 2 TB, right?

  I added the 2 TB drive to the front USB port and formatted in ext3, it shows very well in stocks and a space free expected.

  So I made a backup and the source = task share / dest = USB/Sharename/and he ran.

  It works for a few minutes and stops with this error:

  Encountered error copying data from the source ==> /USB_HDD_4_1 path / / bla due to lack of disk space. [Job 003]

  I look at the USB and it is FULL. Zero byte available. He made a few records, but they are all empty.

  What is going on?

  Are there hidden files (.appledouble, etc.)? I ran BlueHarvest on the volume before the backup, and he deleted a bunch of them. But not 2 value of TB.

  I use this volume mainly with my Mac... am I missing?

  Any help is appreciated! Thank you

  OK, I got the multiple partition problem.

  When partitioning a disk with Mac disk utility, it creates a partition from FAT32 MASK called EFI which is used for Intel to start. The EFI partition is confusing RAIDiator and leading them to try to use the small EFI partition instead of the large main.

  Since I am not start this drive (it's only for backup), it is safe to remove it. You must enable a debug option to see the partition in disk utility. Google search for "EFI Partition delete on mac" to see how to do it.

  Also, I used EXTfs for mac by Paragon Software that allows you to create and mount ext3 on your mac partitions. http://www.Paragon-drivers.com/ExtFS-Mac/

  Backup operation runs now... If all goes well, it ends with success!

• How can I migrate a time machine backup external USB drive to time capsule

  Searched the forums and can't seem to find an answer. With the help of El Capitan 10.11.6. You want to transfer backups Time Machine 4 years on an external USB drive on my new Time Capsule. Any ideas would be MUCH appreciated.

  There is no official method because it has problems.

  There's no official way.

  Here see Q18. http://pondini.org/TM/FAQ.html

  We recommend that people not me there. It has not proven reliable long-term. Start a new backup on the TC and keep the USB stick in the form of archive. After a few months or a year you won't have it.

  You have to understand the Time Machine backup otherwise locally the CF network. It is easy enough to move the backup network local but much harder the other way around.

• Move backup by USB-drive to Time Capsule

  I used to make with Time Machine backups on an external USB drive. Now, I would like to move these old backups to my new Time Capsule.

  Is this possible? And how do I do it?

  Thank you

  Click here and follow the instructions.

  (143017)

• Satellite Z830 - backup on USB storage drive recovery

  I need to make the backup of this Z830 recovery system.
  But unfortunately, the system does not recognize the usb storage drive to make this recovery.

  Obviously, the storage usb drive have plenty of space and OK to work on this Z830.

  Any suggestions?
  Thanks in advance

  Hello

  The recovery image can be created on a CD/DVD disc or USB memory stick. As far as I know you cannot use a common USB HDD for recovery.

• Rescue and recovery lists no backup on USB Iomega eGO drive

  Hello

  I have been using an Iomega eGO external backups USB drive.

  I was able to identify and remove (if necessary) backups in Windows 7 and rescue & recovery running, but I can't get the list of backups at the start of a recovery in rescue & recovery DVD.

  Basically I replaces unencrypted with a SSD hard drive that supports encryption.

  The goal was to use a full backup immediately before removing the HARD drive to restore the complete system.

  At the start of the recovery DVDs, recovery utility & rescue lists not all backups, even when the check box for the list of backups on other systems is checked.

  It makes no difference if the selection of THE places or USB external drive.

  Any ideas?

  Backups are not much good if you can't get back them.

  If my old drive did not then I would be in a worse state than this. I can't say I'm impressed.

  Well, I've finally sorted this issue.

  I tried to create a new recovery disk.

  I even tried the recovery time in Windows and see what backups it detected. Yet once, I drew a blank.

  The question was this:

  On my W510 at least, none of the USB3.0 ports are recognized by Lenovo rescue and recovery software when you select the USB storage device. Once connected to a single USB 2.0 port the USB eGo has been recognized and listed backups.

  Unfortunately, this means a minimum of 6 hours to restore from a full backup!

• ACER S7-391 RECOVERY OF A BACKUP ON USB DRIVE - BOOTING FROM A USB DRIVE.

  The manual shows as below: -.

  If it is not already enabled, you must enable the

  F12 Boot Menu and once switched on and registered:-

  During startup, press Fn> + => to open the start menu. The boot menu allows you to choose which device, select the USB drive. Use the arrow keys to select the USB device, then press on Enter.

  I activated with F12 success and after pressing F12(Fn+=) only the windows startup menu appears with no possibility of selection.

  I should if Acer community member can help with instructions step by step on how to get a boot menu by selecting the USB stick to boot from.

  Thanks for help

  Boot Mode UEFI is where you were mistaken. You will need to attach it to Legacy to boot from USB drive and restore your backup, UEFI will happen to return to Windows (according to Acer).

  Your USB flash is bootable, however it does not contain your actual backup (disk image) files. If you did your USB bootable after backup, well, your backup went, as in the process of making a USB flash drive bootable, that the drive is wiped.

  I would suggest to update your Bios, the direct download of the here are more late (2.15).

• Get error when trying to backup on USB: the willing backup of a file system drive corrupted. Fix it using the verification tool disk errors, or choose another backup location. (0 x 81000008)

  Original title: what is the disk error checking tool

  I am creating a backup on a USB key, I bought recently. But when I do an error apears that the backup was not successful, and then this error appears "the backup target K:\ device failed with the following error:"

  The backup disk has a corrupted file system. Fix it using the verification tool disk errors, or choose another backup location. (0 x 81000008)"
  SOMEONE PLEASE HELP!

  I am creating a backup on a USB key, I bought recently. But when I do an error apears that the backup was not successful, and then this error appears " the backup device target K:\ failed with the following error: "

  The backup disk has a corrupted file system. Fix it using the verification tool disk errors, or choose another backup location. (0x81000008)"

  SOMEONE PLEASE HELP!

  Hello

  This error can occur if there are problems of system files on the drive selected for the backup file location. Have you tried to save the backup to a drive or another location? Please try the following to fix the disc
  [1] method: Using Check Disk to find the files corrupt
  • In the start menu, look for invites
  • Right click on command prompt and select run as administrator
  • When the application starts, insert the following text and press ENTER: Chkdsk.exe/f/x k:
    Where we mean K:  the disc damaged.

  NOTICE: Check disk is maybe not able to lock the drive and launch the operation if the disk contains files required for Windows to run correctly. It asks if you want to schedule a check disk at the next startup upwards instead.
  Thank you
  Have a nice day :)

• How to use Windows backup with USB

  When I try to back up using Windows 7 backup and restore I get the following message: "Please write the following label on a blank media and insert in E:\. ». When I then click OK, I get this message: "there is no media in the drive.  And when I click OK on that I get this: "he has no media.  Backup Windows needs a CD/DVD or USB drive to continue.  Insert the required one.  This despite the fact that I have a direct on the USB flash drive and I can manually save him.  Can I go back to a flash drive using Windows backup and if so, how?

  You will need to rerun Setup and choose the drive flash under the saving location for.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

• Backup via USB in windows 8.0

  I have problems with the backup of files on a flash drive USB on windows 8.0.I go to control panel and go to the backup files. I turn disc on which is F and it says that it cannot identify? Can anyone help with this problem.

  Hi David,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right

  direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. How do you try to back up files?
  2. Is your USB detected otherwise or if you are able to open the drive through Windows Explorer?
  3. Do you have an error message when you plug in your USB key?

  First, I suggest you refer to the following steps to back up your files using the recovery of files in Windows 7.

  (a) press the Windows key + X , and then select Control Panel.

  (b) click on recovery of Windows 7 file.

  (c) click configure backup.

  (d) follow the instructions on the screen to save the files to a drive.

  If the drive is still not detected, then try troubleshooting steps for the USB ports. Check the following methods and if they are useful.

  Method 1:

  Please try the fixit provided below which will help you solve common problems associated with not getting devices not detected.

  Hardware devices do not work or are not detected in Windows

  If method 1 does not work, try Method 2.

  Method 2:

  Remove all USB devices connected to the computer (except keyboard and mouse) and reinstall all USB controllers.

  1. Press the Windows key + X, click Device Manager.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How to make an ESXi backup on USB?

  I have a few servers ESXi 4.1 on USB keys. Now I wonder how can I save the config ESXi and USB itself, in which case the USB will be dead or damaged? One of the USB key on a single server is already showing the signs to go to rest forever, and I would like to have a backup of it. Is there a tool I can use to create a backup on another USB key?

  xcom1000 wrote:

  Thanks, I was looking for some kind of script. And the backup process itself is ok, but the restore configuration procedure needs to be alive and running of the ESXi host. So in case of emergency (USB key works do not), what would be the correct procedure to restore the server without hollow is a complete reinstallation of ESXi and reload the config with vicfg-cfgbackup?

  Well, everything depends on how many ESXi servers you have.

  If you have small env is not worth to spend a lot of time for preparation of extra super recovery too. I don't know anyone who supports up that ESX or ESXi breaks.

  For small env:

  1. PowerCLI script -you can create the script CLI power for each of your guests with specific parameters

  http://communities.VMware.com/community/VMTN/Server/vSphere/automationtools/PowerCLI

  Catering requirements:

  ESXi server must be running in - running

  restore procedure

  manual installation of ESXi (15 minutes), after installation, run a script (2 minutes) against the new server and DONE

  2. with the help of vMA

  Create a bash script that would back up ESXi firmware, set it on a weekly basis in crone (on the server of the vMA)

  Restore requirements

  ESXi server must be running

  ESXi must be on that same level as if it were before the construction accident

  restore procedure

  manual installation of ESXi (15 minutes), after installation restore a Firmware using the new server and DONE

  http://www.VMware.com/support/developer/VCLI/vcli41/doc/reference/vicfg-cfgbackup.html

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Can not backup on USB drive, says that there is not enough space, but there are many

  I was able to save only once.  the total size was about 4.2 billion.  Now XP doesn't let me put anything on the drive flash 8 bigger than 4,2 g. I tried to crush, deletion, reformatting, renaming - you name it.  I can put large files on the flash drive with other computers, so there must be something done XP.  In properties, it shows a lot of space, but I still get the full message of media

  Well even if you have too many files, size does not matter in the folder root of the USB then
  You can not copy more to it... try to reduce the number of files in the root folder. Try to copy everything
  the files on your hard drive and remove it from the USB and try to copy your file to it. Rob - bicycle - Mark Twain said it is good.

• Recovery Manager, you want to do a backup via USB no drive

  USB instead of disc using dvd - R, will not let me proceed .i want to make a copy, so if I have problems I can fix my computer. Using Recovery Manager

  Hello

  There should be few options and you can select DVD or USB. Please read the following instructions:

  http://h10032.www1.HP.com/CTG/manual/c01662115.PDF

  Kind regards.

• Factory default backup (USB Noo - Noo of?)

  Quick question, I created a backup of USB factory default and it has become corrupted somehow and I have a small question.

  When you create a key recovery USB with a 32 GB USB Flash drive, will be corrupted recovery if I put additional files on the USB with USB recovery information?

  In other words, if the USB drive is 32 GB and the recovery is 16 GB, I never will be able to use the extra 16 GB which is free for storage?

  It is recommended not to use the additional free space on the USB recovery media. You can format it USB and create support of USB recovery again. You also have the possibility to buy recovery USB support for your computer from the Acer store.

• USB drive will not appear in the finder, but is OK in disk utility

  My "music backup" external USB 1 TB SSD showed in the Finder, until a few days ago, when he disappeared. I tried dismantling and Assembly of the command line. The said command-line editing is successful, but I still don't see the drive in Finder.

  If I go into disk utility "First aid" reports no problem. The drive is formatted for OS X.  If I right click and say "Open in the Finder" I can see all the folders and even drag in the sidebar where they work, even after a reboot. I can't see the drive at a higher level.

  How can I fix it? I guess a solution would be to create a folder called "Music disc" and then move all files on the disc in it and then put it on the sidebar, but it seems silly. How can I get my hard drive appears again in the finder.

  PS Si I use a third-party file manager, such as ordering a PRO, the USB drive is available for selection in the drop-down list of disks attached.

  Help!

  The Finder, choose utilities go to menu, open the Script Editor and run:

  the shell script ' chflags nohidden ' / Volumes/VolumeName /'.

  put the name of the drive where is VolumeName.

  (142676)