Bad performance on a table partitioned range when you use sysdate

Similar Questions

• HP 5740: Printer HP 5740 paper range when you use eprint on my phone, but works very well with my wife's phone

  Hello

  I just bought a range of printer HP 5740 and my wife and I downloaded EPrint for our iPhones (5 and 6).  Since the photo tray only takes paper 4 x 6 , we need load paper 5 x 7 in the main tray.  I was able to load paper and change the settings so that the main tray had paper photo 5 x 7 and was able to print multiple photos using the phone to my wife (5 c).  Then I tried to print photos a little more of my phone (6) and the printer told me he was on paper.  I tried to reload several times and making sure that it has been set up correctly, but it won't work.  However, he worked again with the phone to my wife and I don't have the out of paper message.  Any suggestions?

  Thank you!

  Martin

  Hello

  Please try

  a open app HPePrint,

  (b) select the photo to print from your phone

  (c) support on edit (top right).

  d press paper then the size,

  (e), select 5 x 7,

  (f) Source of touch,

  (g) touch the main tray (not Auto Select, using automatic selection, he will use the Photo tray as default value).

  (h) touch done

  Now you can print of the main tray.

  Kind regards.

• ORA-01789 - when you use the operator of TABLE and SEM_MATCH

  Client version: 11.1.0.7 on Windows 7 (32 bit)
  Server version: 11.2.0.3 on Windows 7 (64-bit)
  
  I am model prototyping a simple RDF, and I'm getting a ' ORA-01789: block has an incorrect number of columns in query results "when you use the SEM_MATCH with the SCOREBOARD operator.
  
  I can run this:
  

  select id, a.triple.GET_TRIPLE() from drik.rdf_data a

  and the first line is:
  

  (<http://www.ihc.com/drik/term#2>, <http://www.w3.org/2000/01/rdf-schema#subClassOf>, <http://www.ihc.com/drik/term#1>)

  Now, I want to use the TABLE like this:
  

  select
    c
  from 
    table(sem_match('{ <http://www.ihc.com/drik/term#2> <http://www.w3.org/2000/01/rdf-schema#subClassOf> ?c . }', 
          sem_models('Prototype'),
          sem_rulebases('RDFS'),
          sem_aliases(sem_alias('rdfs','http://www.w3.org/2000/01/rdf-schema/')),
          null
          ))

  But this performance gives the ORA-07189. Even try SELECT * gives the same error.
  
  I expect to get a refund:
  

  <http://www.ihc.com/drik/term#1>

  How should I approach troubleshooting this?
  
  Thank you, Steve

  Thanks for posting the script. I was able to reproduce the error locally.

  The problem is the use of the sem_apis.create_rules_index () procedure, which has been deprecated:
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25609/sdo_rdf_newfeat.htm#autoId26

  Please use sem_apis.create_entailment () instead, and the error should disappear.
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25609/sem_apis_ref.htm#CHEHDGBD

  Thank you
  Matt

• [ADF, JDev12.1.3] When you use create/restoreSavepoint... Restore operation is still useful? And other doubts...

  Hallo,

  Dario and Timo advised me (in this thread Re: [ADF, JDev12.1.3] Master w/playback af:form only af:tables detail: how to handle insert and edit through forms?) I make a request using the functions create/restoreSavpoint to this fragment in my application.

  

  The tables are read-only, and the user can insert and modify records by a form of popup.

  Each table has its own pop-up that I created using a btf executed as diaolog (*).

  Before I open the popup, I create the backup point.

  BindingContext bctx = BindingContext.getCurrent();  
  DCDataControl dcDataControl = bctx.getDefaultDataControl();  
  String sph = (String) dcDataControl.createSavepoint();  
  AdfFacesContext.getCurrentInstance().getPageFlowScope().put("AdfmSavePoint", sph); 
  

  When the popup is closed, I restore the backup point if the Cancel button was clicked...

  Object confirmOrCancel = returnEvent.getReturnValue();  
  if (((String) confirmOrCancel).equals("cancel")) {  
    String sph = (String) AdfFacesContext.getCurrentInstance().getPageFlowScope().get("AdfmSavePoint");  
    BindingContext bctx = BindingContext.getCurrent();  
    DCDataControl dcDataControl = bctx.getDefaultDataControl();  
    dcDataControl.restoreSavepoint(sph);  
  } 
  

  I have these doubts:

  1. the button "CANCEL ALL" (so far) AM restore operation is still meaningful (is always useful) when you use the check points? Or can I avoid using the restore of the AM operation, creating a backup point before you enter the fragment and restore it if the user clicks on "RESTORE ALL"?
  2. for all tables: before opening the popup insert/change the backup point is implemented pageFlowScope under the same key 'AdfmSavePoint '. Is it OK or would it be better to use a different key for each table (for example 'AdfmSavePointTable1', 'AdfmSavePointTable2',...)?
  3. If the pageFlowScope already contains a checkpoint under the "AdfmSavePoint" key... What does if I give the floor to new .put ("AdfmSavePoint", sph)? Can I be sure that the old value is overwritten?
  4. is this safe with nested savepoint? For example in my case I want to create a backup before the fragment in the image point is displayed (and restore if the user leaves the fragment by clicking "RESTORE ALL"), then within the fragment, as I said above, I would manage other points of record when inserting/editing tables.
  5. I noticed that clicking on the button "RESTORE ALL" when it relates to the AM-restore operation causes this strange thing: when before displaying the fragment I call SetCurrentRowWithKey on the master istance VO... If I click on "ROLLBACK ALL" posted master VO Records changes and 1 minutes of the main of the VO table is displayed. Why the master istance VO is not reimain in the folder I've previously selected by SetCurrentRowWithKey?
  6. With reference to the expression (*) above. The BTF 'dialogue' I created contains only the page jspx with shape and a return to activity. I also tried a) create (and restore) the backup point, b) to call createInsert inside the "dialog box" operation BTF (see images below), but the createInsert on retail VO istance called inside the 'dialogue' BTF seems not to reflect on the table as when I call createInsert by calling btf. I have to make some adjustments in the 'dialogue' of BTF?

  

  

  Thank you

  Federico

  Federico,

  (1) Yes, what should happen if a user add or edit vo1 and click ok in the dialog box but decided that ask to work must be restored?

  (2) as long as you don't have that a dialog box is open, it should work.

  (3) the flowrate range of page is a map. You can put the same key more than once. If the key already exists, the value is replaced.

  (4) in fact, I don't know, but the sounds of complicated design. I guess you can record more points, but only in the order of creation. It's as if you try to rebuild the framework. BTF yo it even for you, when worn right. Please go to ADF Architecture Square and read and watch it task flow of related things.

  (5) this behavior is as expected. A restore resets all the iterators so thagetto point at the top of he. http://www.Oracle.com/technetwork/Developer-Tools/ADF/learnmore/OCT2010-OTN-Harvest-183714.pdf 'keep the line after cancellation' shows how to handle this situation.

  (6) I suppose have you refresh the table iterator, once you close the dialog box for the new data. But that's only a guess because it depends on how the btf share control of data and the your involved.

  Timo

• Constantly be spinning mainly when you use Safari?

  My iMac started having continuously the turning wheel.  From what I can tell, it's mostly when using Safari.  Lasts for a few seconds, sometimes longer.  When you use Google Chrome, it seems not to happen.  I want to just make sure that it isn't something serious.

  Data sheet: 2.9 Ghz Intel Core i5, 16 GB memory with 3.11 TB of storage. running the Version OS X El Capitan 10.11.4.

  I ran EntrCheck and it came with the following text:

  EtreCheck version: 2.9.10 (261)

  Report generated 2016-04-13 18:13:42

  Download EtreCheck from https://etrecheck.com

  Time 02:39

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  iMac (27-inch, late 2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  iMac - model: iMac13, 2

  1 2.9 GHz Intel Core i5 CPU: 4 strands

  16 GB expandable RAM - [Instructions]

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  NVIDIA GeForce GTX 660M - VRAM: 512 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since the start-up time: 15 days

  Disc information: ⓘ

  ST3000DM001 disk HARD APPLE disk1: (3 TB) (rotation)

  EFI (disk1s1) < not mounted >: 210 MB

  Recovery HD (disk1s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (2) /: 3.11 TB 2.47 free - 37 errors

  Drive failure!

  Storage of carrots: disk0s2 120.99 GB Online

  Basic storage: 3,00 TB disk1s2 online

  SM128E SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Boot OS X (disk0s3) < not mounted >: 134 MB

  Macintosh HD (2) /: 3.11 TB 2.47 free - 37 errors

  Drive failure!

  Storage of carrots: disk0s2 120.99 GB Online

  Basic storage: 3,00 TB disk1s2 online

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub keyboard Apple, Inc.

  Apple Inc. Apple Keyboard

  Apple Inc. FaceTime HD camera (built-in)

  American Power Conversion Back-UPS RS 700G FW:856.L3. D USB FW:L3

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 143 tasks Apple

  [operation] 87 tasks Apple

  Launch system demons: ⓘ

  [failure] com.apple.Kerberos.digest - service.plist

  [loaded] 47 tasks Apple

  [loading] 140 tasks Apple

  [operation] 101 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2015-10-29) [Support]

  [loading] com.coupons.coupond.plist (2014-02-19) [Support]

  [no charge] com.oracle.java.Java - Updater.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.agsservice.plist (2015-10-29) [Support]

  [failure] com.adobe.fpsaud.plist (2016-03-18) [Support]

  [operation] com.crashplan.engine.plist (2016-03-24) [Support]

  [loading] com.hikvision.iVMS - 4200.plist (2015-02-27) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [no charge] com.oracle.java.Helper - Tool.plist [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2015-05-26) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  CrashPlan menu bar of Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)

  Other applications: ⓘ

  [ongoing] com.code42.b42menuextra.122912

  [ongoing] com.etresoft.EtreCheck.2912

  [ongoing] com.google.Chrome.5472

  [ongoing] com.microsoft.Word.52832

  [ongoing] com.Microsoft.AutoUpdate.FBA.128672

  [loading] 397 tasks Apple

  [operation] 231 tasks Apple

  Plug-ins Internet: ⓘ

  Flip4Mac WMV Plugin: 3.0.0.126 - SDK 10.8 (2013-02-07) [Support]

  FlashPlayer - 10.6: 21.0.0.197 - SDK 10.6 (2016-04-05) [Support]

  QuickTime Plugin: 7.7.3 (2016-03-12)

  Flash Player: 21.0.0.197 - SDK 10.6 (2016-04-05) obsolete! Update

  CouponPrinter-FireFox_v2: 5.0.3 - SDK 10.6 (2014-02-19) [Support]

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-10-29) [Support]

  Default browser: 601 - SDK 10.11 (2016-03-12)

  SharePointBrowserPlugin: 14.6.2 - SDK 10.6 (2016-03-21) [Support]

  Silverlight: 5.1.20913.0 - SDK 10.6 (2014-01-22) [Support]

  JavaAppletPlugin: 15.0.1 - 10.11 (2015-07-05) check the version of the SDK

  3rd party preference panes: ⓘ

  Flash Player (2016-03-18) [Support]

  Flip4Mac WMV (2012-09-14) [Support]

  Perian (2011-07-23) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 3.11 TB disk used: 637,89 GB

  Destinations:

  [Network] data

  Total size: 2.00 TB

  Total number of backups: 161

  An older backup: 08/02/13 01:04

  Last backup: 13/04/16, 15:47

  Size of backup drive: adequate

  Size of backup 2.00 TB > (disc 637,89 GB X 3)

  Top of page process CPU: ⓘ

  9% adobe Photoshop elements Editor

  9% kernel_task

  4% WindowServer

  diskimages-helper (2) 2%

  fontd (2) 2%

  Top of page process of memory: ⓘ

  1.58 GB kernel_task

  541 MB CrashPlanService

  Mdworker (29) 311 MB

  Com.apple.WebKit.WebContent (6) 246 MB

  Word (2) Microsoft 164 MB

  Virtual memory information: ⓘ

  10.00 GB of free RAM

  6.11 used GB RAM (1.35 GB being cached)

  4.48 GB used Swap

  Diagnostic information: ⓘ

  April 11, 2016, 21:21:09 /Library/Logs/DiagnosticReports/Safari_2016-04-11-212109_[redacted].hang

  /Applications/Safari.app/Contents/MacOS/Safari

  I'm not great technique, but know enough to be dangerous.  Any help would be appreciated.

  First backup your drive hard as soon as POSSIBLE. You may well have a defect of the hard drives.

  Disc information: ⓘ

  ST3000DM001 disk HARD APPLE disk1: (3 TB) (rotation)

  EFI (disk1s1) < not mounted >: 210 MB

  Recovery HD (disk1s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (2) /: 3.11 TB 2.47 free - 37 errors

  Drive failure!

  SM128E SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Boot OS X (disk0s3) < not mounted >: 134 MB

  Macintosh HD (2) /: 3.11 TB 2.47 free - 37 errors

  Drive failure!

  Then start in the recovery volume (start with the command + R keys), select disk utility and run the feature of first aid on the disks.  If you receive a message that x number of errors were repaired, rerun the first aid until there is no errors detected and repaired.  Restarts normally and restart Etrecheck.

  Regardless of the results of the second report by no. means that you should not have Apple test a free diagnosis of your Mac.

  Thirdly, launch Safari with the SHIFT key is pressed and see if there is an improvement in the performance of Safari.

  

• MainStage "lag" when you use the SPACEBAR as 'play '.

  Hi all, I'm relatively new to Mainstage (V3), and I'm hoping to use it for the first time this weekend to play the extra backing with a band tracks

  The issue I'm having, is that with the SPACEBAR of laptops on 'PLAY '. It is often "lag". or simply does not start the song. I have to wait a second, then hit again, it will work.  It is almost as if in Performance mode, when you use the down arrow key to select the next song, the 'focus' is on the list of patch, and if I click in the background where are playback buttons and stop, THEN that will work. I have not, however, been able to reproduce this particular behavior on a consistent basis.

  Everyone knows the same thing? Or why it is so 'all or nothing '?

  And a question important much donor... I gave all my reading titles to the waveform appropriate the other night (so I could visually see the waveforms above the attenuator as offers of backing track model), however, once I was moving songs in a different order, which stopped working. No idea why?

  Thnaks in advance

  About the offset by hitting the space bar, a thought occurred to me.

  How Mainstage allocates 44.1/16 bit wave files used in the reading plug-in? Which means, when a song is selected, which uses, for example, to separate the 5 cases of reading, one can assume that these audio files used in that song would need to "load" first.

  Anyone know if this is how Mainstage works?

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• I updated my ipad ios 9.2.1 and when you use safari, it crashes

  I've updated 9.2.1 on my ipad and now my safari crashes when you use the keyboard

  Here's my own list of the fixes suggested trying who helped many former users of iPad.

  A warning:

  I make no warranty, express or implied, that any PART of my patches suggsted or solutions will fix/restore each older iPad on his former status of operation

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  For additional questions to Safari, try disabling Safari Suggestions found in the settings app in the control panel settings of Safari. Press Safari and in the right panel, look for the Suggestions of Safari and turn this option off to disable this feature.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a hard reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!

• No bass when you use the docking station to not probe

  When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

  

  Yes! I finally solved it on my system:

  • Go to the control panel
  • Choose the material and audio

  or simply to display all Control Panel items

  • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
  • Wait for the program to come black EQ
  • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
  • Uncheck the 'improvement of Audio '.

  Fact

  In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.

  

• When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

  I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

  When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.

• IMAQ Grab Acquire.vi error when you use an external trigger on a card NI PCIe-1433 (sync problem?)

  According to my recent post on getting up and running with the NI PCIe-1433 camera link card, I ran into a bit of a snag.

  When you use the internal trigger on the camera, everything works 100%. I can view all the data from the camera in MAX as well as in the labview project. However, whenever I have set the mode switch is where things start to fall apart.

  What I have confirmed:

  -Camera is switching between inside and outside triggering.

  -NI PCIe-1433 camera link card is set up properly. While in external mode, I can trigger the camera by using a function generator and check the wire to the MAX. Everything works fine.

  When the unit is in external mode, the function Acquire.vi enter IMAQ - my mistake VI. The error is:

  Code :-1074397150

  The possible reasons for a timeout.

  Now, I have it set up so that a mistake here will not end the LabVIEW file. Sometimes, data of interest makes however (about every 10 seconds-ish). So what seems to be the case, it's that this external trigger signal is not in the lineup when the clamp is attempted. Is it possible to synchronize these? May reference the trigger signal external sort in my LabVIEW project so that the clamp is performed only when that trigger impulses?

  So I solved my problem. He was in time. The external trigger that I used for the device was simply too slow. I was initially using a trigger from 2 Hz to be able to view the values changing on LabVIEW probes. But it was enough to get enough data to move above the camera cable to assemble a picture and kept it in time. Travel up to 9 kHz solved the problem. No adjustment to the camera settings or LabVIEW code was necessary.

• When you use your hard disk defragmentation process starts but seems stuck and won't end evn after several hours. How I can remidy this?

  When you use "Defragment your hard drive" the process starts but seems stuck and won't end evn after several hours.  How I can remidy this? I was already able to defragment successfully.

  Hello

  How do you know that never, it ends when there is no GUI on Vista for Defrag?

  in vista, the defragmentation process works silently in the background

  Unfortunately in vista it does not provide a GUI to show progress as it did in xp

  to do this, you'll need 3rd party defrag programs

  read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

  http://www.SnapFiles.com/get/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/get/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

  http://www.SnapFiles.com/get/puranfree.html

  Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

  http://www.SnapFiles.com/get/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

• Used QUICK to collect files from the XP machine. Now cannot locate the data when you use Easy Transfer on Win 7 machine to restore settings

  I had XP SP3 on my computer and used the files and Settings Transfer Wizard to collect the data.  Recorded on another partition, formatted and installed Win 7 Pro.  Now, when you use Easy Transfer to restore data it tells me that it cannot find all the data.

  Any ideas?  Thank you!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• WMP has encountered an error while fire-"you met an error message when you use Windows Media Player".

  Original title: WMP has encountered an error when burning.  Check that the burner is connected properly and that the disc is clean and not damaged.

  I'm getting the above error message.  I tried at least 4 different drives and they are not the first discs I used this pack. also, I burned 30 + drives prior to receiving this message. When I click on the button "help", he says "you have encountered an error message when you use Windows Media Player.  Additional information is not currently available for this error. »

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  Open the troubleshooter in Windows Media Player settings, run and check the status of the issue.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

• Artifacts of the screen when you use the stamp tool

  Has anyone seen this?

  When I use the stamp tool I get all kinds of objects on the screen. Weird thing is when I do a screen recording of it, it's much less obvious but nonetheless still there. If I want to make a screenshot of it he disappears as soon as I touch the screen capture key (cmd-shift-3) or toch any key.

  So I had to take a picture with my phone:

  

  I tested VRAM / my different applications with dedicated GTX680 GPU / benchmarking utilities and results all seem well, games work fine, any application that uses my GPU works very well. Except of course Illustrator, which crashes all the time when you use GPU performance. And now Photoshop.

  A video of these objects can be seen here: http://www.studio57.nl/downloads/PS_Stamp_Sreen_Artifacts.mp4

  I'm on Mac OS X Photoshop CC 2015.1.2 10.11.3, and the last 346.03.05f02 of Web Driver nVidia.

  It seems that it is. I had the form of the word NVIDIA, they were able to reproduce to the issue and they are working on a fix.

  I'm so happy that my hardware is fine and that NVIDIA is still developing drivers for the Mac community!