Banner.fla fail to open in the test film Panel

Similar Questions

• How to change the "Failed" result State after the test of "success."

  We do a picture of a LCD screen and watch if his work of all. Sometimes, the LCD is good work but the step failed. Where automatic LCD test fails show us the image of the camera to the user and it can decide if the LCD for success or failure. So when the user decides that the screen is good job we have to crush the status of the automatic test demonstrating lcd screen test passed in the report and the database. I tried with

  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.Status = "Passed",
  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.PassFail = "True",

  But in the basis of the status of this step is always 'impossible '.

  What I've done wrong?

  Thank you

  Alteschwed wrote:

  We do a picture of a LCD screen and watch if his work of all. Sometimes, the LCD is good work but the step failed. Where automatic LCD test fails show us the image of the camera to the user and it can decide if the LCD for success or failure. So when the user decides that the screen is good job we have to crush the status of the automatic test demonstrating lcd screen test passed in the report and the database. I tried with

  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.Status = "Passed",
  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.PassFail = "True",

  But in the basis of the status of this step is always 'impossible '.

  What I've done wrong?

  Thank you

  I recommend the following:

  (1) that the display automatically to test an Action step rather than a step for success/failure and set to square one local variable to see if the LCD self-test failed (for example Locals.AutomatedLCDFailed).

  (2) create a new test pass/fail (using the no adapter) that takes both the variable local and entry of the user account to determine it is the condition for success/failure (for example to set the data source of the step to an expression like:!) () Locals.AutomatedLCDTestFailed & Locals.UserLCDTestFailed)

  As an alternative to do 1) a step of the Action you can leave a step for success/failure and clear step on it to "step failure causes failure of sequence. You can then use the status of this step instead of Locals.AutomatedLCDTestFailed. The only difference is that the automated test will always be displayed as failed in your report, although the sequence can still be passed. It is somewhat a matter of preference.

  Hope this helps,

  -Doug

• How to hide no visible layers in the test film?

  Flash CS5

  I have a layer that I use for construction purposes, it illustrates that test movie. If I publish settings and uncheck the include layer masked under the flash tab, when I test movie, my cars don't appear along the lines of guide at all and just pop into view in the film ends.

  How does skin off layer visibility during the test the animation without affecting the guidelines hidden?

  Envirographics

  If I have a layer which acts only as a guide to ask things or whatever, what I do is right click on the layer name and select 'Guide' from the menu that appears.  It will not appear in when I use test movie

• Failed to open all the files, including programs or system restore files

  I had a pretty bad virus just about an hour ago that came just from scratch. It was one of those who blink at you and says that you have 20 horses of Trojan and other. I used internet to solve security norton, but it came with nothing else in the amount of time I had, because my computer has suddenly dropped. I turned it back in safe mode to restore the system, but all of a sudden I now get the box that says:

  "Choose the program you want to use to open this file" and lists only internet explore.

  I'm going to go and when I find the program file, that it does not open, he goes back to this window just does nothing for me. For this reason, all I can open is internet explorer, not even norton or system restore, in particular.

  I obviously need system restore. Please help me.

  Thank you in advance.

  Hello

  Just in case there are persistent pieces of malware here is the method of complete elimination.
  .exe question difficulty in the next message.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now) and
  Double-click it, and then run it like this. You can rename it back later. Do the same with
  other programs according to the needs. Use this method to others as needed - NOT assume all
  a program deletes all or that it is no other malicious software.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  The AV.exe malware goes by many names:
  
  XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
  antivirus, scams for you force to pay for them while they have no advantage at all.

  How to remove Vista Internet Security and other varieties AV.exe.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform:
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
  Run them in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Failed to open all the links using safari and mail

  I can't open all links by safari and by e-mail. When I try to open the link it does not work and it will freeze. then I touch the original key two times to close the safari and the e-mail. How can I remedy this?

  Already, I erase history and Web site data and restart my phone.

  Please help me and give me a useful way! Thank you very much!

  As you can see if you read the forum, this is a known issue. Apple is working on a fix.

• Failed to open and the icon on the desktop

  We cannot access any program, e-mail, the internet, anything without a box pop up and ask us where we want to open it, then it asks if we want to run or save?  If we click on run, you can't, we cannot access anything whatsoever.  Does anyone have an answer?

  You paraphrase him. So, I have to ask...

  The box did ask you what program do you want to an open with ?

  In other words, have you had a show of Open with box whenever you tried to access a program?

  If so, this gives a try...

  Open with appears whenever I try to open a program

  http://forums.techguy.org/Windows-Vista/899995-solved-Open-box-opens-every.html

  Scroll down to the answer given by Phantom010:

  Download and merge the reg. EXEFIX .

  quote...

  Try this registry fix: EXEFIX

  Unzip the patch and extract it. REG file on your desktop. Right click on the REG file and choose Merge. Note that you must be an administrator to apply this hotfix.

  Reset.

• Failed to open all the files, they are all displayed as. INK files and asked what program to open it with Windows 7

  * the original title - .encre does that mean? where my desktop icons and taskbar gone? *

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: i can't open any of my files... I get a window that say they are all the .encre files and asks me what program I want to use to open... This includes all browsers as well... my desktop icons have also no image

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  .lnk are shortcut files (shortcuts are usually what you have on your desktop and the start menu).  If inadvertently, you tried to right click on a shortcut and choose "open with...". ", you can breaking their properties.

  Because the associations are complex and the registry can be dangerous, the best way to solve your problem is to use the system restore to fix system associations when returning parameters at the same time that they last worked properly.  Here's how:

  1 - Hold down the Windows key and type R to open the Run dialog box.

  2 - paste in this command: %systemroot%\system32\rstrui.exe

  3 - follow the instructions to restore your system at a time before, it was working fine.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Failed to open all the files in the CD program.

  I have an OCR mathematics book, complete with CD-ROM.

  Hardware requirements (OS): Windows 95, 98, ME, 2000, NT or XP.
  I use Windows 7, so I tried to run in compatibility mode, without success. I tried every OS listed above, but I still had the same problem:
  "Error opening: * file location."
  So if this isn't the compatibility problem, what could be bad?
  Thanks for your help.
  Other useful information:
  Book published in 2004, so CD too.
  Other hardware requirements:
  Pentium 100 (IBM compatible PC)
  16-bit graphics card
  * 4 speed CD ROM Drive *.<-----  =""  ="" the="" disk="" drive="" makes="" weird="" sounds="" when="" reading="" the="" cd.="">
  Color SVGA monitor resolution 800 x 600

  If it is a 16-bit program, it could well be, being of that age, it doesn't install, compatibility or not, on 64-bit for victory.

  If you have win7 pro or ultimate, you can install virtual winxp of MS and see if it will install in this environment, but there are no guarantees.

• synchronization of streams audio sound changes in the test film

  Hi all.  I use flash cc. I inserted a file .mp3 on its own layer and set the synchronization stream.  The audio file is designed to animate the character speech so I want the stream option.  While in the script itself so fine sound, but when I go to 'test movie' the sound is hollow and far.

  Any advice?

  In the publishing settings, you can change the compression. If you make the mp3, I would try 128 Kbps as a starting point. The parameters can default to 16 Kbps, what its bad.

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• The "Open new tab" button and the shortcut "Ctrl T" fail to open a NEW TAB

  The "Open new tab" button and the shortcut "Ctrl T" fail to open a NEW TAB

  Install Firefox 4 beta that healed, but brought other problems.

  The Ask toolbar is initially in the version of Firefox 3.6.13. Obviously something in this extension is not compatible with a Firefox security patch. Disable this extension or uninstall it.

• Failed to start the test

  I have a hp pavilion g7, Windows 7
  
  Starting tonight, my laptop fails to start and freezes on the "getting started" page view. After several of the recommended options, I ran the test that does not start.
  
  The display screen reads-
  Memory test: past
  Smart check: past
  Dst short: failure
  
  Failure ID: GU6E00 - 63479 L-MFPX01-60TP03
  Product ID: A7A44UANBA
  
  Hard drive 1
  
  Starting test: failed
  
  Where should I go here for this problem?

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and you want a guide on replacing the hard drive you, please let me know...

  Kind regards

  DP - K

• VI Analyzer: the wire under the test object fails with call library function nodes

  Hello

  If I have a knot of function call with an ErrorIn and an ErrorOut library, the VI thread Test Analyzer "Thread under object" always fails with two hits in a library function node call.

  Double click to the salient facts occurrence lines error related to the call... node.

  The test fails, if the error lines are not connected.

  Thank you!

  H

  Sorry, created the CAR number is #208992.

  Kind regards

  Michael

• Can not register opimize: when I start computer, a window opens opimize the registry failed

  When I start computer a window opens opimize the registry failed

  Hi Harry,.

  Looks like you have some program registry installed and programmed to run at startup, which does not work.  I suggest we identify and remove the boot and then remove it totally from the system (uninstall).  Registry modification programs are generally risky, rarely do much good, can cause great harm and are not really necessary as Windows does a good job of managing the registry on its own.

  Try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once don't forget to reset your operating system to normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  I hope this helps.

  Good luck!