synchronization of streams audio sound changes in the test film

Similar Questions

• I tried to record some live audio. I downloaded Wondershare Streaming Audio Recorder I opened the program - but could not hear the audio I tried to play.

  original title: sound problems

  Hello!

  I tried to record some live audio. I downloaded

  Wondershare Streaming Audio Recorder

  I opened the program - but could not hear the audio that I tried to play. I don't know if downloading this program is related to the problem.
  I opened Skype - and everything worked fine. I could hear, etc. But if I run an MP3 in Windows Media Player - I hear nothing!
  My sound is at the top.
  In my Volume mixer, I see:
  1 output device digital (SPDIF) bounce up and down. (but I don't)
  2 but applications: sounds of Windows, Windows Media Player and Google Chrome will not move. (but they are at the top).
  Any suggestions?
  Jews

  I managed to get the results of work. I don't know where come the SPDIF.

  I downloaded a new driver Realtek for audio from the computer. This corrects the problem.
  But I still want to know what happened.

• No HDMI Audio, could not play the test tone, cannot change the default playback device

  Hello, I have real trouble with my HP Pavilion dv6-2160us experience (with the i3 - 330 M, no dedicated graphics card) Windows 7-64 bit, SP1 PC and I would be happy to help.

  I created a new thread because, despite the fact that many other people have experienced a problem similar to this and have posted what has worked for them, nothing has worked for me.

  The problem (s):

  My main problem is that I can not any audio to play from my PC to my HDTV HDMI.

  When I plug my HDMI cable on my PC and the TV, the TV is recognized in the playback devices, but nothing he can play.

  When I try to test the TV in playback devices, I get an error "could not play the test tone.

  In addition, I want to mention a few other odd behavior that I think can be a part of the main problem.

  In playback devices, I can't change anything. I can't disable or enable a device, I can not set as default playback or communication devices, and I can't save changes to the properties of the device. Whenever I try to change something, as the default playback device, nothing happens, or the changes are immediately reversed.

  The Question:

  How can I get audio to play through HDMI on my PC (is not a problem with the TV, my other machines HP audio playback over HDMI it is fine)?

  What I tried:

  I tried:

  • Change the default playback devices, which I am unable to do
  • The utilities of reading Audio de Windows 7 running in a clean boot state
  • Uninstall and reinstall the driver Intel(r) Audio display
  • Uninstallation and reinstallation of the IDT High Definition Audio CODEC
  • Uninstall the IDT Audio PC program under programs and features
  • Disable the IDT High Definition Audio CODEC

  Nothing has worked.

  The drivers I have are the latest issued by HP

  How can I get this to work? I would appreciate help.

  I'm at the point where I'm willing to try solutions quite technically involved, so feel free to post those.

  Your expertise is greatly appreciated.

  Thank you.

  OK, I finally have the answer for that.

  If you experience this problem even and you want to fix it, you'll need a PC running the same version of Windows 7 that your PC works lot of work but it works without problems, with regard to this point.

  Here's what I did to solve the problem:

  1. Create a system restore point.
  2. Run regedit.exe as administrator.
  3. Go to HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\MMDevices \Audio .
  4. Compare the permissions and attributes of ownership of this key and all subkeys to your work PC.
  5. Change all permissions and property attributes for interest on the defective PC keys as they are the same as those on the operation of the PC.
  6. Restart your faulty computer.

  I hope this helps. It worked for me.

• How to hide no visible layers in the test film?

  Flash CS5

  I have a layer that I use for construction purposes, it illustrates that test movie. If I publish settings and uncheck the include layer masked under the flash tab, when I test movie, my cars don't appear along the lines of guide at all and just pop into view in the film ends.

  How does skin off layer visibility during the test the animation without affecting the guidelines hidden?

  Envirographics

  If I have a layer which acts only as a guide to ask things or whatever, what I do is right click on the layer name and select 'Guide' from the menu that appears.  It will not appear in when I use test movie

• My old account cloud with tests and the new school with the account of the company account, but no change with the tests

  I signed with my first personal email account and downloaded the clouds and applications such as photoshop and illustrator and used as tests. I discovered later that I already paid on behalf of the company with my school account, so I signed with my school email address and removed the existing clouds and apps and downloaded on the same computer. However, the creative cloud shows that I always use the trial. I would like to start over with my new account of the school. Help, please...

  Probably do not completely erase you your old information

  Sign out of your OLD account of cloud... Restart your computer... Sign in to your account PAID Cloud

  -If you have more than one email, but of course you use linked to your subscription

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  or

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• Banner.fla fail to open in the test film Panel

  This is an example of a problem that I have with some fla files is not stable. I posted this problem earlier this week, but didn't know how to download the file on the server to be looked at. Here is the link to the file that I understood how to download: schweidel.com/Banner.fla I sure would appreciate it if someone could open it and tell me what could be the problem.

  Its working fine. If no error thrown, post it here. What is your version of flash?

• Satellite L755 - 1 1 PSK2YE - problem audio / sound

  Hi all

  I have a toshiba satellite L755 1 1 PSK2YE and same time he has a problem with audio - sound.

  The sound is ok for 3-5 minute after it shut down, after the resumption of 3-5 minutes, after 2-3 minutes.

  I have install all drive and OS (WINDOWS 7 and 10), but the problem is not solved.

  If I go to devices reading see attached Picture1 passing of the playback to the recording tab with a simple click of the mouse audio released a 10-30 seconds.

  reading tab mutual registration to RESUME audio playback devices

  can help me please.

  I have Toshiba L755-1 MB, PSK30E-04U006Y4... with Conexant Smartaudio HD, same audio problem. Its just cut randomly and turns back the same way as everyone else.

  I can turn it back on for a few minutes even if I go to sound options and just spent reading in recording tab without changing anything. I also tried everything from the pilot replacement windows 7 Ultimate update disable all improvements etc. everything works for a short time and that his cut back again.

  I like someone finally would come up with a solution for this big problem thanks to you all! I found MANY people having this piece of the issue there was no jet solutions.

  Here are two pages about this

  http://forums.Toshiba.com/T5/audio-S...on/TD-p/332616
  http://forums.Toshiba.com/T5/audio-S.../597884#M13125

  I tried everything nothing works, so please if anyone knows it please tell us magical solution.

  THANKS TO YOU ALL!

• At what point in the prelude-> can first workflow I synchronize my external audio?

  Very well. I have Canon DSLR images, external audio of a Zoom h4n.

  I ingested video prelude and spent an hour our Director of instruction how to use it. Now, she has marked everything up and everything thrown out first where our editor opened all this very well. Here's what we can't understand:

  We want Pluraleyes who own audio Zoom on videos from Canon and PE did a good job to match the main elements to the audio ext, but subitems do not return to the re-imported XML file.

  I'm probably too stupid to understand this. But when should we make this sound synchronization? Because for now, it seems like either:

  1. we have merged clips with audio in sync, but we lost our subelements defined by Prelude and I can't understand how to connect the clips to the rough prelude merged edit... what kind of makes all our work prelude for nothing; or,

  2. I guess I could synchronize the audio first of all, export merged clips, ingest them as a prelude, let the Director his contract there and then re-import everything back in first... which in some way looks a long way around.

  Ideas, y ' All?

  Hello

  We don't yet a solid integrated workflow prelude for streams audio sync but work for a future version. In the meantime, here are a few options for possible workaround solutions.

  1. If you merge your clips first and then put them in prelude (like you me ing below) who will certainly work.

  2. you can continue as you are now and you have your Manager connect the clamps before sound sync market. BUT, when your manager is done connecting a clip, they can use the FILE-> save metadata under... Featured as a prelude to save all the marker data in a separate file. Now switch to send these clips in Premiere Pro and merge with the audio. When you have your newly merged clips you can translate as a prelude them, then use the metadata Panel combined to open the metadata file that you saved earlier and then apply these markers to your clip.

  None of these workflows are ideal, and I agree, that we should make this workflow more efficient and simple. But while we work on this part, I hope that one of these suggestions will be fairly painless for you.

  I am also interested to hear your ideas for how you would like to sync sound to behave as a prelude to moving forward.

  Kind regards

  Michael Goshey

  Owner of the product, Adobe prelude

• Satellite T210 problem of speaker sound audio (T210-112) if the system is moved

  * Phone: Satellite *.
  * Model: T210-112 *.
  * Operating system: Windows 7 *.
  Condition: new
  Versions of BIOS/Driver: unknown

  * Symptoms: *.
  * When the phone is picked up, fixed, tilted or moved * in the air during audio playback the * noise reverberates * for a short period until the system is stationary again.
  To describe more in detail, the 'sound-bite' which plays currently gets stuck and repeats several times quickly and then continues to normal playback. Let's say, for example the audio clip plays someone who says the word "toshiba" and pick up the laptop in the middle of it, it comes out as "toshi-i-i-i-i-i-i-i-i-i-i-ba". This has been tested with the internet streaming audio and audio via youtube an installed demonstration program running.

  * Troubleshooting: *.
  -Since it's a new laptop, I returned to the seller and checked if this happened on the view model in the shop. He did, so this seems to be a general problem.
  -J' searched the forum, support pages, google without result.
  -There seems to be no README / info AVAILABLE included with the latest version of the BIOS / Driver downloads from the Toshiba support site that describes known issues.
  -J' looked for related information from REALTEK (I understand that it is an ALC259-based system) but nothing is there.

  * Suspicions: *.
  I think this may be linked to the protection function of the hard disk (?) +, which is supposed to start when he realizes that the laptop may be declining. Perhaps this can be solved through BIOS or driver updates?
  (I have not tried to disable this feature on the system, or update any components that I wanted to return the unmodified system to ensure the refund. I want to buy this system but will not do without a guaranteed solution.)

  I hope you can help!
  Thank you!

  Hello

  Akuma is right.
  This is related to the installed HARD disk protection software.
  If the laptop would be transferred to fast the HARD disk Protection software blocks the head of the HARD drive in order to avoid that the HARD drive against damage. This leads to delays while writing or reading data from the HARD drive.

  It would be possible to remove the software from the system, but this is not recommended, because the software protects the drive HARD and without this software, you HARD drive may be damaged more quickly.

• Windows Media Player 11 continues to stream audio in the context of a video file even if I left the program.

  Windows Media Player 11 continues to stream audio in the context of a video file even if I left the program.  How to stop?

  Hello

  1 is there a problem with a particular video or videos?

  2 did you change on your computer before this problem?

  Follow the suggestions and see if it helps.

  Method 1

  a.Press CTRL + ALT + DELETE.

  b.Click start the Task Manager.

  c the process tab.

  d.Click the process of wmplayer.exe.

  e.Click end process and then click on complete the process.

  Method 2

  See the article and see if it helps.

  File Readme for Windows Media Player 11 for Windows XP

  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

• changes to the sound scheme are not saved

  I can't change the sounds associated with events, via the control panel - sounds and audio devices - sounds. When I make changes that they do not stick. They change what they were before.  The only way to change the sounds associated with events is to edit the file regristry (HKEY_CURRENT_USER\AppEvents\Schemes\Apps\Explorer\EmptyRecycleBin or BlockedPopup).  Any ideas?

  Hello

  ·         Were you able to change the sound scheme on the system without any problems before?

  ·         You encounter an error message when you try to change the model of sounds on the system?

  ·         How long have you been faced with these questions to?

  ·         Remember to make changes to the system?

  I suggest to disable the antivirus software on the system and then checks to see if you are able to record the sound scheme.

  Note: Activate security software once you've done the test.

  Also, I suggest you follow the steps mentioned in the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/XP-Pro-SP3-sound-schemes-forget-saved-sounds/4f0f46ff-5372-4DB5-A265-b4acba2e4254

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...

• Unable to save the Streaming Audio / Creative xfi extreme audio/windows 7

  Creative xfi extreme audio and Windows 7.

  I tried everything and can not record audio streaming. tried to use hearing, audacity and in the audio recording window.
  Drivers day and are tired of all the configurations.
  A post I read online said that Creative didn't activate this option.
  Any suggestions or hacks that you can think...
  Scott

  You can save "what you hear" XP for sure.

  If you do not have this option in the Blender of W7 so you are right, its been disabled.

  However, there is a work around.

  You must create a virtual audio device on your PC. Google for "streaming audio" and you will find some solution, some software are free, others pay.

  Once you have chosen and installed the software, then use the virtual audio device to play the streaming audio and record its 'exit' in your Xfi.

  It is a different and more complicated using two sound devices - your audio device shipped along with your Xfi. Their implementation is not easy, but basically if you got theml work, you will need to connect a cable from the line from one to the line in the other. However, I do not recommend this at all. The software is much more simple.

  See you soon,.

  Jerry

• HP G71-340US low volume when audio sound on the highest rate

  Very low volume with sound levels at the highest point, intermittent reception during audio streaming, loud buzz unknown sometimes for unknown causes. I own a hp G71-340US since 4/10... and am these audio problems.  Y at - it an update to fix this problem?

  Hi Sharopa

  Try reinstalling the audio driver...

  Follow these steps:

  1. click on start and then type devmgmt.msc in the start search box and press on enter.
  2. from the list of devices, expand sound, video and game controllers.
  3. right click on the sound card, and then click on uninstall.
  4 restart the computer.

  After restarting the computer, sound card get installed automatically.

  If the problem persists, please upldate the audio driver following the steps mentioned below.

  Install an updated audio driver

• BlackBerry Smartphones stereo gateway switches sound speaker of the device after each song when streaming Pandora

  When streaming Pandora on BlackBerry remote stereo gateway, the sound moves from my audio system to the speaker of the device after each song.  I can go to manage connections and disconnect and then connect the stereo gateway and it goes back to the sound system.

  How can I hear stay continues through the sound system once the gateway is paired?

  There is a setting in pandora under options to activate the blue tooth