Bar moves (up) to scroll by itself under Vista Home Premium 64-bit

Similar Questions

• Why 2 partitions of OS on HP dv9628 laptop computer under Vista Home Premium?

  I was just checking my wife of the older HP Pavilion dv9628nr under Vista Home Premium with 2 HARD drives.  I didn't even know he had 2 HARD drives.  I opened the case to make sure.

  Here is a screenshot of disk for system management.  I have a few questions:

  1. Why is there a system operating on each HARD drive partition?

  2 are 2 necessary and deleted maybe?

  

  Generally however, the C: drive is not always your primary. This may change if based on the installation program. The installer in this book, could be Raid. This is where the 2 drives are used to create a combined drive. Based on the laptop being adverstised as a drive of 240 GB, but with 2 120 GB drives in it. This is most likely how it was setup. To know for sure you'd have to check to see if this feature is enabled in the BIOS.  Before you change any settings that you would like to make sure that you have recovery discs and backed up all the content. As having the OS on a single disk, you will need to disable Raid in bios and probably to format both drives. Then reinstall the operating system on you get (the one listed as C:, to avoid complications).

  This article (from ehow.com) can help with your Bios check, so that you can see if Raid is enabled and if you choose to disable. How to disable Raid BIOS

  I hope you're able to help.

• Lost my software of fingerprint on Pavillion HDX9200 (under Vista Home Premium)

  Hello

  I've had arguments with my recently updated to the PersonaPersonal software version...

  He blocked me on some Web sites (or so I thought) and I decided to uninstall this software.

  Now I really miss being able to connect with a fingerprint.

  Where can I find the correct version of this software for my HP Pavillion HDX9200 that can run under Vista Home Premium?

  Thanks for your help!

  You must install the fingerprint sensor driver and software separately. Here are links to information and download:

  AuthenTec AES2501 Driver fingerprint sensor:
  FTP://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37920.exe

  DigitalPersona Fingerprint Software for Microsoft Windows Vista (32-bit):
  FTP://ftp.HP.com/pub/SoftPaq/sp40001-40500/sp40206.exe

• I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020

  I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020. I tried safe mode, but no luck so far

  Hello

  You are supposed to try it in "Safe Mode with network"; not 'Safe Mode'.

  You need a cable connection; no wireless using this method.

  Start method 3, etc at this link if top is not solve:

  "Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/883825

  {Moderator note: Thread is placed in the appropriate forum}

  See you soon.

• During playback of movies Netflix it blocks WMC on vista Home premium 64-bit

  Original title: Netflix in WMC on vista Home premium 64-bit

  For months now, Netflix has cause my MC crashing.  I can search and select movies, but when he's playing, it blocks MC.  I updated my system via windows update, everything is up-to-date.  Any ideas?

  Hi Aaron Braun,

  1. What is the error message you receive library breaks down?

  2. you remember to make changes on the computer before this problem?

  There is a known issue on some computers that have a chain very long user agent in Windows Internet Explorer. This problem occurs when the user-agent string exceeds 260 characters. There is currently no work around supported for that matter.

  For more information, see the Microsoft article and try the steps mentioned below.

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  http://support.Microsoft.com/kb/972496

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to read MOV files in Win Vista Home Premium 64-bit

  I have a laptop running Windows Vista Home Premium 64-bit OS.  I can't play my digital camera Panasonic Lumix's MOV files.  I installed QuickTime and codec fix and it still does not work.  What is a DRM problem or something else?  Please give me the fix so I can play MOV files on my computer.  Thank you

  I have a laptop running Windows Vista Home Premium 64-bit OS.  I can't play my digital camera Panasonic Lumix's MOV files.  I installed QuickTime and codec fix and it still does not work.  What is a DRM problem or something else?  Please give me the fix so I can play MOV files on my computer.  Thank you

  Hi Newsletter,
  Welcome to Microsoft Windows Forums!

  I suggest to convert mov files to a different file format and then run. You will need to use a third-party tool to convert mov files.

  You may need to get in touch with quick time if there is a problem with it.
  http://www.Apple.com/support/QuickTime/

  Convert music, videos and photos from one format to another
  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  Types of files supported by media center
  http://Windows.Microsoft.com/en-us/Windows-Vista/file-types-supported-by-Windows-Media-Center

  Try and let us know the answer.

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft Answers Feedback Forum and let us know what you think.

• Remote access under Vista Home Premium computer

  All the instructions I've seen for remote access to my computer layout calls for a different Version of Windows. I find it a bit of a rip off. At the time where the user had a little more control of his machine, if he had the guts to try, you could always find a workaround or solution to another way to accomplish the task.

  I wonder: is there a fix for this problem?

  I am taking my current office in the Brazil and by setting up there. I wish I can access it from the United States and the thought that I could put in place so I could do. But I don't want to upgrade to another version of windows on it. I'll try to access using a laptop running Windows 7. can someone help me with this problem?

  Thank you very much for your answers.

  It is a Forum of Vista.  To Windows7 questions, you need to republish your question in the Forums Widows7: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where someone who specializes in issues of Windows7 and procedures will be more than happy to help you with your problem.  It is possible that your computer in the States works under Vista, but the computer controlling the process is the initiating access and that is why you need to post on the forums of Windows7 (although you will certainly also have to make some changes to your computer in the States to allow remote access works correctly).

  In the meantime, here is an article that applies to both Vista and Windows7 that could help with the basics: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.  I do not know thay will tell you more and better in the other forum.  BTW, I have no idea if Windows7 supports remote access or remote with antyihing desktop - other than the Windows operating system, but you can ask in the other forum.  I suggest to use the network, Email and online Forum here because it is above all a network problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Task now shows only icons on the bar, no words, in Vista Home Premium 64-bit

  When I used to run a program it show up under the taskbar, between the quicklaunch & the system tray. It would be about a 1.5 inch rectangle which would include information on the program, or even what was the program. It would give status percentage of disks engraved, scroll the titles of the songs of songs that played in winamp, display the title Web pages, so I could see that the internet explore or firefox icon I had to click on. now I just get TINY little icons, barely larger than their counterparts of task of quicklaunch bar. They are much more difficult to click quickly or even know if they are right, it is so boring

  I went through all the taskbar properties and options, windows areo off and I don't know what to do or even how to look for answers on this issue.

  ~ Ian

  FOUND an answer how to change the width of bar app work thought after it for others

  Regedit

  HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics

  The default data for MinWidth value is 160

• Windows Media Center starts itself in Vista Home Premium

  04/06/13 - I tried all of the suggestions posted in various forums, as well as some, and it's always the case. This has happened intermittently for about 3 months now. When I loaded Microsoft Security Essentials, it found a virus in the EHSHELL. EXE file. Otherwise, I made the following months:
  1. of course it wasn't in the start menu.
  2 tried to delete the directory the Directory Windows EHOME. When he said that I had not [not true] Administrator privileges, I COMPRESSED the directory and moved to an external drive. I could delete it, but it came back, like an old monster movie! Have not been able to remove it, something said he was part of the operating system. How instructions make loads the operating system to tell it NOT to load?
  3. removed all references to the EHSHELL. EXE file in the registry.
  4 disabled WMC in Services. There are 4 references, I can say.
  5. when it seemed to be the result of my touchpad disabled, too.
  6. of course, it was not loading in the Sys Config file.
  NONE OF THIS HAS WORKED. He works now as I type this. Help!
  E-mail address is removed from the privacy *-HELP! I have surgery tomorrow, you don't need the aggravation...

  Try the Fix-it application.

  See also: -.
  For Windows Vista file association problems

• Windows Media Center (11)? Under Vista Home Premium SP 2 crashes when I click to read an entry from Netflix

  He reported the following:

  Media Center has stopped working

  ==> Online and are looking for a solution and close the program (I tried this - does not solve anything).

  Description:

  Stopped working

  Signature of the problem:

  Problem event name: CLR20r3

  Signature of the problem 01: ehshell.exe

  Signature of the problem 02: 6.0.6001.18000

  Signature of the problem 03: 47919e0e

  Signature of the problem 04: mscorlib

  Signature of the problem 05: 2.0.0.0

  Signature of the 06 problem: 4a9ee411

  Signature of the 07:20 c 7 problem

  Signature of the 08:143 problem

  Signature of the problem 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Hi RDougShelton,

   
  Step 1: This problem occurs if the Windows Media Center update process (Mcupdate.exe) cannot access the Windows Media Center data store. You may experience this problem if the data store is corrupted. So, try to rebuild the Media Center data store. To do this, follow these steps:
  a. exit any running instance of Windows Media Center.
  b. remove the mediaCenterDataStore.db file. By default, this file is located in the following location:
  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
  c. Click Start, run type, and then click Run.
  (d) in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
  e. in the details, click pane right mediacenterdatastore.db and then click on remove.
  f. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.
  g. launch Windows Media Center and check if the problem persists.
   
  Step 2: Scanner of sfc (System File Checker) to find and difficulty of the missing or corrupt system files
  See http://support.Microsoft.com/kb/929833
  
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox 17.0.1 under Vista Home Premium, svc pak 2, affected by Google redirects pages of spam

  As mentioned in a thread now closed on this site referring to XUL Runner & XUL cache and some registry entries as being the cause. I have a very high percentage of redirects to pages of spam when I use Google search in Firefox, but not IE. How can I stop this?
  I tried Firefox extensions and plugins for all the files that are similar to those mentioned in the statutes, or something similar, or something that seems suspicious, without any result. I searched the registry of entries such as those described, or similar, or otherwise suspicious, also with no results.
  What I feel, well, looks like exactly what is being discussed. Support for Google has a web page for reporting redirects like this, which makes me the thing, it may be a known issue?

  http://support.Google.com/WebSearch/bin/request.py?contact_type=reporting_malware & hl = in & page = TS.cs & TS = 1209905 & 1209905 = 1209909 & 1209909 = 1210107

  Disable or remove "Print Helper 2.5", that was linked to this problem in another thread: Google Redirect Virus Removal.

• Cannot install upgrade KB976325 - error 8007371 - IE 8 under Vista Home Premium SP2 running.

  Other comments from the Knowledge Base KB976325 flay as a security for IE7 update.  I am running IE8.  I tried to remove the Windows\servicing\Packages directory KB976325 files, but they are protected.
  This upgrade is necessary, or how he remove it from the queue of the update.

  How about an error 80073712 ?

  .. .you you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
  http://support.Microsoft.com/kb/957310

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed IE8 and/or SP2?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Replacement of motherboard on PC HP Media Center under Windows Vista Home Premium (32 bit)

  On a HP Pavilion Media Center m8226x desktop PC is running OEM Windows Vista Home Premium (32 bit) version.  Replacing motherboard ASUS M2N68 - motherboard HP Narra2-GL8E 6150SE with a card mother MCP61PM-HM (Nettle2) due to the failure.  The two boards have same chipset and form factor.  Can I just replace the Board of Directors without having to reinstall windows?  Do I need to install new drivers?  I do not have a CD installation or installation key, Microsoft would provide a key if necessary?  Is there a link I can reference for replacement MB / install?

  Thanks for you help!

  HC

  OEM license is linked to the original version of the motherboard, it is M2N68 - LA. You lose OEM 'rights' when you have changed the Council.

• Cannot create a system under Vista Home Premium SP1 Restore Point

  If I try to create a system restore point manually, I get the following error:

  The shadow copy provider had an unexpected error while trying to process the specified operation (0x8004230F)

  I rebooted, restarted the VSS service, but still no luck. Someone at - he found a solution to this short error reinstall Vista?

  Hello

  Check the fix here as it is similar:

  Difficulty 0 × 8004230 C error in Windows
  http://www.mydigitallife.info/2008/06/27/fix-0x8004230C-error-in-Windows/

  -----------------------------

  Also that to help clear corruption and repair/replace damaged/missing system files:

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------

  You could try to remove and rebuild your region ShadowCopy.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html
  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• How to turn off/turn on my notebook computer touchpad under vista home premium?

  I have a model laptop Medion MD 96420. When I write something, I often accidentally brush on the touchpad with annoying effect.

  I asked Medion customer support and I was told that it is a software problem. A big problem, apparently.

  Hi josefgrubert,

  Follow these methods.

  Method 1: Follow these steps:

  (a) go to control panel, mouse and device settings tab.

  (b) click on enable or disable.

  Note: On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, just do Fn + F7 or F8.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.