Bat software not installed?

Similar Questions

• Support of software not installed?

  Hello

  It is with respect to the PCI-5640R.  I have LabVIEW 2009 installed, but I get a warning that the software support is not installed for the FPGA.  I reinstalled NI RIO 3.3.1.  All the software seems intact and I can't tell what's missing.  LabVIEW does contain none of the examples 5640R. A complete reinstall is not out of the question, but a little pain that I'm at a University and is not the original software on the disk... I have to download it.

  Hello

  I think that the solution to your problem is to install the driver 5640R. Which can be found here: http://joule.ni.com/nidu/cds/view/p/id/1601/lang/en

• Satellite C660-1JH: problem of USB device - software not installed

  Having had several attempts trying to install different software, Microsoft Fixit program has scanned and found that my PC has loopholes with USB points.

  The screen read: "the software device driver is not properly installed. Please consult the manufacturer of your device to help get this device installed.

  It also sets out the following...
  'Intel(r) ICH9 Family USB Universal Host Controller 2936.
  'Intel(r) ICH9 Family USB Universal Host Controller 2939.
  'Intel(r) ICH9 Family USB Universal Host Controller 293C.

  No idea how I can fix this please?

  Computer is Toshiba Satellite C660-1JH.
  Operating system is Windows 7, 64-bit.

  Hello

  Try removing the USB ports and hubs from Device Manager.
  Restart the device and wait Windows OS has reinstalled all USB controllers once more.

  If this is insufficient, the chipset driver update because driver chipset controls the USB controller.

  Here you another thread on chipset driver;
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=249306

• HP dv6Pavillion 6100se LS371EA: Device Driver Software not installed properly

  Hello

  I reinstalled Windows 7 ultimate 64 bit, after installing all the drivers of hp I lost WIFI

  and when I found under Device Manager > Display Drivers > (1) standard VGA Graphics adapt (ERROR) - when I right-click and check under general, the message "this device cannot start (code 10)".

  (2) standard VGA Graphics Adapter - works

  

  and

  > under other devices

  Bluetooth device - Pehripheral (error)

  -Network controller (error)

  the two error showing

  What these errors actually causing WIFI not working? Please guide me how to fix these errors

  When I go to the HP Connection Manager

  Watch under WIFI - disabled by the mobility Center

  I can't able to fix it.

  When I goto Windows Moblility centre, it appears no not showing Wirless connection switchable button

  I tried to scan the hardware changes update driver software, its doesn't work don't not his driver saying is so far

  Kindly solve my problem of WiFi

  Thanks in advance

  Network Controller ID is 4313-Broadcom Wireless LAN

  http://ftp.HP.com/pub/SoftPaq/sp47501-48000/sp47895.exe

  The Bluetooth item may be that an external device can be connected a SAMSUNG mobile.

  Let the driver to install if necessary, but it may already be installed.

  Broadcom 2070 Bluetooth

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52773.exe

  Concerning

• LAserJet MFP M477fdw Pro: software not install

  I tried several times to put my new printer LaserJet M477, but every time I get an error when you install the software on my laptop.  I tried to use the CD provided, downloaded from the Internet, using the HP program and I get the same result every time.

  Installer invites me to connect the laptop to the printer, through a long process, get to 99% done, then says installation takes too long, tells me to restart the computer and start again.

  The laptop is ASUS F555UA-EH71 15.6 inch, Intel Core i7, 8 GB, 1 TB Portable HDD, 10 Windows (64-bit)

  Any help would be appreciated.  Thank you.

  Called customer.  It took an hour or two, with staff support with remote access, and the printer is now setup and works very well.

• Restore or recover the software not installed

  I can only go back about 3 weeks on my restore point, so i uninstalled a program about 2 months ago is anyway back to a point of restoration at the time? I had some problems with my roxio creator 9 saying certificate files have either been missing or damaged, do not know what that was I thought I'd just all over again, now that I'm trying to re - install I get the message that my cd key # is not valid. I thought that if maybe I could recover and restore the program then maybe just whats missing would download without key #. or how to get an another # or replace the problem? Please help me! Thank you!!!

  Hello

  If there is no available restore points, we will not be able to restore the computer to three months. I recommend you contact Roxio support and check what could be better done.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is there a download of the software (not install) that we install on machines without an internet connection.

  Is there a way to download firefox for a USB key without the installation program, so I can install it on more than one PC?
  We use Oracle Forms in the House. No internet connection because it is safe from outside.
  Internet Explorer works well, if we want to try Firefox.

  It is usually best to use the full installer on Windows to ensure that the necessary registry keys will be created.

  You can find the full version of the latest version of Firefox 22.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

  You can copy the installer on a USB stick and use it to install the program.

• Portege M750 - PCI controller is not installed on Windows 7 64 bit software

  Hi, got a SSD upgrade for my machine so decided to do a new install of Windows 7 64 bit and now I have and error indicating that the PCI controller software is not installed, I have tried windows update no. chance - to ideas please?

  Thank you, Peter

  Hi pbaker_1,

  Hmm... PCI controller could mean everything... I think you forget to install the driver for this device

  What is the device ID and the seller of it?

• HP Envy 17-k151nr: software Coolsense do not install for HP Envy

  Hello

  I could not install software for my HP Envy 17-k151nr coolsense.

  When I clicked on the link below and choose my operating system, it does not show the software and drivers. Also, I opened Assistant de Support Hp to detect updates or other options. But he found no solution on coolsense...

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-K100-notebook-PC/7234900/model/7486021

  Hello

  Here's the file to Coolsense for your model:

  sp67743.exe

• Software CyberLink will not install on Win 8

  H8 1380 t CTO, Intel i7 3820 processor. 16 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
  Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, Radeon HD 7570-1 GB graphics card.

  Hello

  Installed Win 8 (own) on a second partition, (dual-boot factory Win 7 and Win 8 on the second partition). Installed all the software and drivers from HP for this system without any problems except for the elements of Cyberlink,"error 1603" code.

  Any suggestions on why Cyberlink programs will not install?

  Thank you

  Hello

  Check the compatibility of your products from Cyberlink here.

  The HP position maintenance for Cyberlink is only an update.

  If you have installed under W7 from Cyberlink, then try the "check compatibility" button to see if improvements are required.  So just try to install Cyberlink under W8 then click on the products tab Compatibile.

  BTW, nice PC.

• HP p1102: can not install software on windows 10

  Hello guys!

  I used to connect my printer (hp p1102) to windows7, now I bought the new laptop and I can not install its software on windows 10. It gives me error is 0 x 80131500 and it cannot recognize my printer during installation, but it is in the list of connected devices. Please help me!

  Well, this should solve your problem.

  1. Remove the USB cable to the back of the PC.
  2. In your type of search bar in cmd and open Command Prompt.
  3. Type "msiexec /Unregister" (without the quotes) and press ENTER.
  4. Type "msiexec/regserver" (without the quotes) and press ENTER.
  5. In your search bar in msconfig and open type MSConfig.
  6. Click the Services tab.
  7. Click Hide all by Microsoft.
  8. Click Disable all.
  9. Click the Startup tab.
  10. Click Disable all.
  11. Click OK and reboot your PC.
  12. Download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you are able to install the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Pavilion laptop - 15-ab262nr: HP 3D DriveGuard and Coolsense software does not install

  Reinstalled Windows 10 on this PC laptop shortly after purchase (clean install to remove all the bloating) and

  Software HP Coolsense and DriveGuard will not install. After having downloaded DriveGuard and try to run the installer, nothing happens, so I go to the list of programs and see here but it is grayed out. Tried the latest version 6.0.28.1 Rev.A. When you try to install Coolsense I get an error message that the software of .net framework must be installed, but it is already part of Windows 10.

  Anything can happen on the ideas?

  Thank you!

  Hello

  CoolSense requires .NET Framework 3.5, which can be present on a new installation of Windows 10 - you can check it as follows.

  Hold down the Windows key and press R.

  In the run box, type appwiz.cpl , and then press ENTER.

  In the left pane, select "Windows turn features on or off" and let the list populate.

  If .NET Framework 3.5 (included .NET 2.0 and 3.0) is not selected, add a check mark, and then click Ok.

  Once installation is complete, restart the computer, let Windows take over completely for a few minutes, and then try to re-run the installer to CoolSense.

  As far as HP 3D DriveGuard is concerned, you could try the following.

  Hold down the Windows key and press R.

  In the run box, type appwiz.cpl , and then press ENTER.

  Make a right click the entry for HP 3D DriveGuard and choose uninstall.

  Once complete, download and reinstall the Chipset driver below.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72862.exe

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Yet, once it finished, reboot the laptop and let Windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  Hi guys,.

  I have problems getting my sbRIO 9606 to deploy.

  Everything's fine until during the deployment process, I get this:

  Deployment of sbRIO 9606 chassis (sbRIO-9606)
  LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

  Please find attached the screenshots of my:

  • License Manager OR
  • Overview of the 9606 MAX
  • My project folder
  • Dialog box deployment where the error is displayed.

  -Adam

  Hi Tim,.

  In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

  The problem is that the recommended Software NI Scan Engine 3.0 installation program.

  The sbRIO 9606 does not support scanning engine.

  Once the scanning engine support has been uninstalled, I could deploy on my 9606.

• OfficeJet Pro 8600 Plus: Scanner will not install software stopped working/Easy Start

  Unable to scan to computer, but has worked in the past. Error message indicates that the software HP for the Scan of the computer could not be located.  Have been trying to install it, it seems to be downloading but then says that it cannot install because no internet connection.  The connection is fine, works for everything else, shows very well in the status reports.  Tried several times, restarted the computer, nothing seems to work.

  Hi @SD58and welcome to the Forums of HP!

  I'd be happy to help you to install the software for your more than 8600. Using Safari or another browser? It seems strange to me that you can download the software, but then can not install, the installation requires no software. However, the Easy Start probably reaches out using internet to locate appreciate software to install. That being said, I feel the question could be linked so browser that I wonder what browser you use and if you could try another.

  Please let me know the result of using another browser and we can go from there. If using another browser resolves the issue, please click on accept as Solution to identify your post as solved.

  Thank you.

• OfficeJet 7310: Officejet 7300 series software will not install on new pc Win 7

  My Officejet 7310 networked HP software will not install on my new Dell Precision Tower 3620 running Windows 7 64 bit.

  Downloaded file is: AIO_CDB_Net_Full_Win_WW_130_141.exe

  * When you run the Setup program, two errors that have occurred having to do with the system who don't not USB capacity or equipment. (There are about 8 USB ports that work, some USB 3.0, any other USB 2.0).

  * Try with disabled firewall doesn't change anything.

  * If I'm running the original printer installation disc, it downloads the new software and I find myself in the same dead end.

  Sitting next to this machine is my (dying) old workstation Dell Precision 390 with Win 7 and operate the HP and related applications very well Solution Center with the same network printer. (The two machines work protection antivirus Malwarebytes'.)

  It sounds crazy!  Any suggestions on how to fix would be greatly appreciated.

  Hello

  Run the Setup program and comlpete extrction process.

  Once the installation dialog box appears to put an end to this window.

  In Windows Explorer, press and type % temp % fall.

  Locate the most recent installation folder, which begins with 7z (e.g. 7z1234s)

  Open the installation folder.

  Rename the file named usbready.exe in usbready1.exe

  Back a levell and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Please let me know the results,

  Shlomi