Batman: Arkham City Xbox 360 not recognized by Windows7 controller

Similar Questions

• Mobile gamepad XBOX 360 not recognized when connected to a Windows 7 64 bit Home Premium computer USB ports

  Very well - so a few days ago (Saturday ~ 2) (25. 2012) I connected to my XBOX 360 (Wired) controller on my Toshiba Satellite L655 computer laptop with Windows 7 ~ Home Premium 64-Bit. To my surprise, a Notification bubble popped up from the taskbar, saying that the "unrecognized USB device. It has malfunctioned. "

  Naturally, I took, waited a few seconds, and then reconnect the USB key. The same message has popped up. Now, I was angry. Repeatedly, I took and reconnected it all a few seconds until that FINALLY the 4 green lights around the button Guide everything illuminated and then back except the one on the upper left, which was the way it should have been.
  I went to the control panel and clicked on the 360 controller to see if he had any input. Nope.
  I pulled out once more, has waited a while and plugged in. No, lucky. The same thing happened again. The Notification bubble came, all 4 green lights on and then all four of them died. I don't know what happened.
  When I plugged the controller to the laptop the FIRST FULL TIME, he installed all necessary drivers in less than a minute and I was on my way. Every time after that, I have taken the controller into the USB Port and began to play. Now all the time, that is to say that it cannot recognize the controller?
  I've tried everything, even a system restore. Nothing did. I've uninstalled and reinstalled the drivers for a few minutes, there was an entry of the controller, then he went just blank.
  I need this controller in order to play my racing games, seeing the keyboard control just aren't the best. I don't know what the problem is, but I wish I had a solution A.S.A.P. Please, Microsoft, please. Help me!
                                                                                                                          
  
  
  
  

  I had the same problem, cannot find a solution that worked everywhere, including Microsoft support forums.

  About to give up, I remembered the old cure NDA, shaped, "why not?"  I've tried everything else. "So I've disconnected everything on the gamepad, blew in every connection and reconnected everything, by ensuring that the connections were tight.

  It has worked perfectly since then.

• Batman Arkham City Game of The Year Edition Windows Live Sign in will not be displayed

  So I recently had the game of the year Edition of Batman Arkham City and it installs and works perfectly except the sign GFWL to does not appear so I can't save my game, I've tried a whole series of things to try to make it work, including

  Reconstruction of my Win7 PC
  Uninstall all products direct windows and re install again
  Disabling and re enabling the sign in assistant in services
  run the game in compatibility and as administrator mode
  put a XLIV dll in the folder of the game.
  and re install the game / games for windows live software.

  I do not understand because the following games that I work very well with GFWL

  Dirt3
  Fable3
  Arkham asylum
  and Halo 2
  How can I fix it so I can save my game?

  If the game does not save at all, not even an automatic backup, it may be better to ask a
  Forum Batman-AC.

  "restart the game until I can continue from where I was."

  Only if you stop smoking to the economy (check) point where recording is done.
  There is an icon of spinning when AutoSave is to save something.
  If you wander over the city off the coast of the mission and search for tag or solve riddles of the Riddler
  for example, then auto backup runs just after you tag / solve the puzzle.
  However, also the recording of objectives and achievements he saves checkpoint, where that enter or exit a building for example and they are where you will be re-spawn when you re - load.

  .

• How can you "Disable penguins Final Communications Disruptor underground" in Batman Arkham City?

  If you know where to find or find let me know. If you have / know also a video link please send it to me. Thank you.

  (I have a little trouble and I need help)

  Aka

  Are you talking about the 3 distruptors, you need to find out who the satellite on them? So if you walk up to them and you should get the possibility of drilling a hole in it. There are 3 screens by disruptor you have to punch if you press select, you should see that your goals on your card should be blinking green. Also when you play, you should see a compass at the top of your screen showing you the direction you need to go... By the Way when you get the part when you play Catwoman and that you are asked or not backup Batman I would choose Save Batman :).

  If you still need help, you can do a search for Batman Arkham City 2 walkthrough and you should get pointed in the right direction.

• Unable to save the game Batman Arkham City in Windows live.

  Original title: problem of batman arkham city-gfwl

  I use windows xp sp3 as my OS.

  City of arkham batman installed a few months ago... everything was perfect and I started to play, but I wasn't able to save the game and then...
  No sign of windows don't live id it...
  Even if I created a windows Live ID, I'm unable to access to "microsoft games for windows live" to save the game...
  I have to update my OS? Or install windows 7?
  HELP NEEDED...

  Hello

  I suggest you to post your query on the forum mentioned below:
  http://community.batmanarkhamcity.com/forums/

  Also you can post your query on the forum link mentioned here:
  Games for Windows LIVE game support
  http://support.Xbox.com/en-us/Games/PC-games/game-support

  Hope this information is useful.

• Batman - Arkham City error Unhandled exception has occurred in your application.

  original title: Please help. I'm desperate "Please see dxerror.log and directx.log.

  Hello

  I was now all night and I'm out of ideas. I am at a total loss. This is the first time I was not able to solve a problem myself by searching online.

  So, let's go. This all started when I installed "Batman - Arkham City" and tried to run for the first time.

  An error dialog box pops up saying:

  ----------------------------
  Microsoft .NET Framework

  Unhandled exception has occurred in your application. If you click on continue, the application will ignore this error and attempt to continue. If you click on exit, the application closes immediately.

  Could not load file or detached ' Microsoft.DirectX.Direct3Unhandled exception has occurred in your application. If you click on exit, the application closes immediately. D.
  Version = 1.0.2902.0, Culture = neutral
  PublicKeyToken = 32bf3856ad364e35' or one of its dependencies
  Access is denied
  ---------------------------------

  The details provided for this error are:

  The exception text *.
  System.IO.FileLoadException: Could not load file or assembly 'Microsoft.DirectX.Direct3D, Version = 1.0.2902.0, Culture = neutral, PublicKeyToken = 31bf3856ad364e35' or one of its dependencies. Access is denied.
  File name: 'Microsoft.DirectX.Direct3D, Version = 1.0.2902.0, Culture = neutral, PublicKeyToken = 31bf3856ad364e35'
  at BmLauncher.Settings.DetermineDefaultSystemSettings)
  to BmLauncher.Settings.StaticInitialise (IniFile iniFile, iniEng IniFile, iniInst IniFile, SystemInfo sysInfo, String localePath, String localeConfigFile, String & localeDir)
  at BmLauncher.Form1.Initialise)
  at BmLauncher.Form1.OnLoad (Object sender, EventArgs e)
  at System.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
  at System.Windows.Forms.Form.OnCreateControl)
  at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
  at System.Windows.Forms.Control.CreateControl)
  at System.Windows.Forms.Control.WmShowWindow (Message & m)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ScrollableControl.WndProc (Message & m)
  at System.Windows.Forms.ContainerControl.WndProc (Message & m)
  at System.Windows.Forms.Form.WmShowWindow (Message & m)
  at System.Windows.Forms.Form.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  WRN: Assembly binding logging is disabled.
  To enable the failure of link Assembly record, set the registry value [HKLM\Software\Microsoft\Fusion! EnableLog] (DWORD) to 1.
  Note: There is some pain associated with a record of failure performance link Assembly.
  To disable this feature, remove the registry value [HKLM\Software\Microsoft\Fusion! EnableLog].

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4963 (win7RTMGDR.050727 - 4900)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  BmLauncher
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///D:/Games/Batman%20-%20Arkham%20City/Binaries/Win32/BmLauncher.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4961 (win7RTMGDR.050727 - 4900)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4962 (win7RTMGDR.050727 - 4900)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Management
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
  ----------------------------------------
  BmLauncherUtils
  Assembly version: 1.0.0.0
  Win32 version: 1.0.1.0
  Code: file:///D:/Games/Batman%20-%20Arkham%20City/Binaries/Win32/BmLauncherUtils.DLL
  ----------------------------------------
  msvcm90
  Assembly version: 9.0.30729.4974
  Win32 version: 9.00.30729.4974
  Code: file:///C:/Windows/WinSxS/x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4974_none_50940634bcb759cb/msvcm90.dll
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll

  ----------------------------------------

  The problem is that I already have the latest version of DirectX. I play recent games like Skyrim smoothly. However, I tried to update my directX anyway. However, when I try and run the installation programs (for example, dxwebsetup), it is not getting anywhere because an error dialog box appears and says:

  An internal system error has occurred.
  Please refer to DXerror.log and DirectX.log in your Windows folder to determine the problem.

  Go of course tells me nothing, but I'll post it as the content of each word to say.

  DirectX when opened in Notepad says: ' 13/12/11 04:32:32: infinst: WinMain(): ParseInfSection() failed. "

  DXError said: [13/12/11 04:32:32] module: infinst (Jan 24 2007), file: infinst.cpp, line: 778, function: WinMain

  ParseInfSection() failed.

  I can't go further than that. I am at a loss. Advice, help, suggestions would be appreciated.

  I tried restoring the system to the closest point as possible, nothing helps. I tried to start the computer with nothing but windows programs and system services, nothing.

  Thank you for your time.

  Go under programs, right-click and run ad administrator, works. I hate computers!

• Error ordinal error 5005 during the game Batman Arkham City

  Original title: Ordinal error 5005

  Hello

  I have a problem with Batman Arkham City

  After installation I click to play, but he gives me a number 5005 could not be located in the dynamic link, what's that? How can I solve this problem

  Tanx

  Hello Ahmad

  It there have been some reports that it would be that when your running an older version of Windows Live for games the game crashes. Try to download this version of Games for Windows and see if the game starts now properly http://download.microsoft.com/download/5/5/8/55846E20-4A46-4EF8-B272-7F988BC9090A/gfwlivesetupmin.exe

  Let me know please if this has worked, or press the answer button mark.

  Yuri

• Turn off the XBOX 360 on Windows 7 wireless controller

  I have an Xbox 360, so I bought a receiver of wireless XBOX 360 to play with the controller on Windows and works very well. But the only two ways I found to disable the controller, takes off the bateries or wait to turn off automatically, but it wastes bateries.

  Is there an app or whatever it is to turn it off manually?

  Thank you

  No, there is no way to turn it off without removing the batteries.

• gamepad Xbox 360 as seen in "Device Manager", but not recognized as "game controller": does not work in the game

  I connected my xbox 360 controller to my pc with the usb cable and downloaded the driver (I run XP Pro 32).  His does not work in-game.  I can see the controller in Device Manager (under the new group called xbox 360 devices) but it does not appear under "game controllers" in the control panel.  Im trying to use it with the Flight Simulator x.

  Hi Absolutemar,

  Welcome to the Microsoft Answers Community Forum site!

  In order to resolve your problem, please visit the below mentioned link.

  http://www.xbox360forum.com/Forum/

  Please perform the following steps also suggests:

  First we suggest you to download the Xbox 360 controller from the below mentioned link:

  http://www.Microsoft.com/hardware/gaming/ProductDetails.aspx

  Then install the Xbox 360 on your computer:

  Note You must install the software on your computer before you connect the gamepad Xbox 360 for Windows on your computer.

  To install the software, follow these steps:

  1. open the software that you downloaded from the Microsoft Windows gaming website or insert the Xbox 360 Controller for Windows installation disc in your computer's DVD or CD drive.

  If the screen does not appear automatically, click Start, click run, type the following command in the Open box and then click OK:

  DriveLetter : Setup

  For example, if the CD-ROM or DVD drive is drive E, type type, and then click OK.

  2. on the configuration screen, click install.

  3. follow the instructions in the Installation Wizard to complete the installation.

  Note You may be prompted to restart the computer.

  For more information about the Xbox 360 installation on your computer, visit the below mentioned link:

  http://support.Microsoft.com/kb/906347

  In this case, you need more information, you can visit the link below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Batman: Arkham City: games for windows live is not pop up!

  Hi, I'm here today because I have some problems with Games for Windows Live or GFWL. I used it for many games, including Arkham asylum, in which GFWL works fine, but when I try to open GFWL in pressing home city Arkham, that nothing is happening. I have reinstalled GFWL, updated and fact all sorts of things, but nothing seems to work. All the patches? (Basically, I'm saying that even with GFWL installed, GFWL no appears in Arkham City even when I press the home button and the "LIVE" button in the game.) Thanks in advance.

  the same problem I did everything that you guys were doing but nothing helped. Maybe because I have the 64-bit system. I don't know, but not of these three sites of shit help if anyone knows what to do heeeeeeeeeeeelp!

• Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers

  My problem is very similar to the one raised here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Xbox-360-controller-seen-in-Device-Manager-but-not/fcf52151-604e-4BF3-BF55-2fa4930bc415
  However, the OP in this question unfortunately never had answer to his question.
  When I plug my Xbox 360 controller on my laptop, my computer recognizes it as a device, but does not recognize it as a game controller. Instead, my device is listed under a category called "Other devices", and the drivers are not installed (he gets the little warning sign yellow after the icon).
  I tried to install the correct 'Microsoft Xbox 360 accessories' (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows (Windows 7 64-bit)) and direct the machine to install its drivers from there, but nothing helps.
  I've tried right-clicking on the device, by clicking 'Uninstall', out in him plugging, uninstalling and reinstalling Microsoft Xbox 360 accessories, restarted my computer and each unique combination of these things.
  I tried to talk to an Ambassador of Microsoft, who told me to update the driver and manually make a 'human interaction device', but unfortunately it did not work.
  I called Support of Windows games, who gave me information from these links:
  support.Microsoft.com/kb/908888
  support.Microsoft.com/kb/906347
  Outside of download the drivers manually in the form of 'Microsoft Xbox 360 accessories' (which I already have), I wasn't able to try all of the hotfixes listed in the guides, because my camera is not listed as a joypad or human interface device. It is simply listed as "Xbox 360 Joypad" and it is listed under the heading "other devices."
  It seems that there is just something wrong with my USB and it's just is not installing drivers properly, but this isn't the case. I plugged many other devices, including an iPod, a mouse and an external HARD drive, which all had their drivers properly installed and works great.
  I also know that it is not a problem with the xbox controller, that I plugged into another laptop (also Windows 7 64-bit), as well as pilots very well on the other laptop.
  I'm really puzzled by this situation. Any help would be greatly appreciated, but please do not repeat the information or links I listed here, or who was in the last question which I quoted above. Thank you for your help.

  UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:

  http://www.YouTube.com/watch?v=kxa5CJsDzwQ
  Here's what you do:
  1. plug your device and go to Device Manager
  2 right click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject) and click on "Uninstall".
  3. disconnect your device
  4. If you have not already done so, download and install the appropriate for your device 'Microsoft Xbox 360 accessories' program
  5. plug your device back on and go back to Device Manager
  6 right-click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject), but this time click on "update driver software".
  7. click on "browse computer driver software.
  8. click on "Let Me pick from a list of drivers for devices on my computer.
  9. Select "Microsoft Common Controller" and then select your device. Have it install this driver. From there on, it should work on.
  If you have any questions, my email is * address email is removed from the privacy *.

• Controller 360 not recognized on Vista 64

  Vista 64 initially recognized the Xbox 360 controller, but from there it does not find the scope.  I also tried to download the software from the center of the suggested solutions miscrosoft.  Nothing...

  Everything I read indicates that Vista 64 should allows me to use my controller...

  Please, help :-)

  think I just find an answer: the Wireless charging cable not a communication cable... buy an adapter...

• Setup error 0 x 80070656 the installation of batman arkham city

  When I try to install the city of batman arkham on my pc windows 7, I get error 0 x 80070656.  I tried to restart, but that has not worked.  The only antivirus that I am running is MSE.  Help, please

  You have installed all Windows updates, particularly security patches?

  It seems that a lot of people get this error when you try to install MSE or Zune, so
  It can help to temporarily disable the MSE while trying to install the game, if you have not already tried that.

  If could also due to a file system corrupted, so run System File Checker
  may be worth a try-
  SFC/scannow command - file system Checker - Windows 7 Forums

  You can also try to see if there are other conflicts software/process - from the clean boot
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  What are your system specs?
  .

• Installation problems on Xbox 360 on XP SP3 game controller

  I am trying to install a game controller Xbox 360 on my PC under XP sp3. The Xbox controller does not appear in Device Manager. I downloaded the Windows Xbox 360 Controller For Windows, but when I try to install it, I get an error message indicating that I need to SP1 or SP2. I am running SP3.

  I talked to technical support from Microsoft and Xbox support (each twice today) and all I get is the phone number for the other. Help!

  Hi David,

  Because the problem is with the game Xbox 360 controller, Xbox support team is a better suited to help you.

  However, we can refer to troubleshoot your Xbox 360 for Windows controller and check if this solves the problem.

  You can also view to configure your controller Xbox 360 for Windows

  It will be useful.

• How do you convince Winows Live I am 44 years old and is not a parent give permission for me to play Batman Arkham City?

  I lost the password for my account, did the thing to change password, and then they asked me to have my parents sign give permission.

  Then, I created a new account, and even once asked me parental consent... My parents are deceaced and I'll be 45 on January 22.

  WTF?

  Hello

  Thanks for posting in the Microsoft community!

  I understand that you have lost the password of the account. We will help you solve the problem.

  You can check the suggestions of the link and check.
  "Microsoft's strategy concerning lost or forgotten passwords".
  http://support.Microsoft.com/kb/189126/en-us
  Note: Technical support engineers, Microsoft cannot help you recover lost or forgotten passwords.

  Just reply with the results. I'd be happy to help you further.