Controller 360 not recognized on Vista 64

Similar Questions

• Satellite L10 - battery not recognized by Vista MS

  Hello

  I use MS Vista on my Satellite L10 and everything works great except my battery which is not recognized by Vista. There is just an unknown device in my equipment manager. In the section on the homepage Toshiba drivers I couldn't find a driver or other instructions. The MS Hotline told me this isn't their but question Toshibas.

  I hope that this forum is someone who can help me solve the problem. I just want to know if my battery has enough power for 20 minutes or 2 hours and I really hate it if my laptop is suddenly out of power.

  Thanks in advance.
  Christoph

  Hello

  You have installed Vista on the L10?
  Wow I know Satellite L10 is not Vista capable and you should be happy that this OS works without big worries on this Satellite phone.

  However, I recommend the Vista update to the last State, to install the compatible chipset from Intel page.

  But I assume that the BIOS on this laptop is not fully Vista capable that this question therefore appears on the L10.

• Batman: Arkham City Xbox 360 not recognized by Windows7 controller

  I recently bought a used Batman Arkham City controller to use for my Windows 7 computer. The drivers of the controller is not found while they were not installed. Not even the program recognized Xbox360 accessories. Help, please!

  You have installed all Windows updates (excluding all "optional" updates)?
  There should be a version that includes the Xinput driver, which is the driver for the controller.
  There was formerly a page to download the Xinput driver, but it is no longer available for
  an unknown reason. Monopoly$ oft works in mysterious ways.

  You can also try site GFWL (separated on the XBOX forums) forums.
  I do not use a XBOX controller, but there should be people out there with more information
  regarding the use of the XBOX controller with PC games.

  On Live

  Games for Windows - LIVE: Support Documents

  .

• Network controller is not recognized on Satellite A100 Windows XP

  Hi all!

  I bought a Satellite A100 PSAAR and I did a clean install of Windows XP on it. I installed all the drivers in the correct order (downloaded from the support page) but I still have a problem:

  Ethernet controller and network controller appear with a yellow exclamation point in Device Manager, and they are not recognized. I have downloaded the driver lan and I managed to do recognize the ethernet controller. However no matter how hard I tried, I can't find the correct driver for the NETWORK CONTROLLER, which still appears in Device Manager in yellow color.

  I really could use any help here... Thank you in advance.

  Hello

  Shouldn´t be a big problem to get some drivers for your machine's real lan. Just go here:

  http://www.Intel.com

  and download the intel proset for ethernet controller. If you didn t already installed the wireless card, do so. Otherwise the other network controller could be the bluetooth adapter.

  It would be nice to hear from you...

  See you soon

• Duplex not recognized under Vista 64-bit printing accessory

  I recently had to replace my old computer with an HP Pavilion a6700f running Windows Vista Home Premium 64 - bit SP1.

  I got my 7410 HP all-in-One printer connected and operating, the latest software HP installed and checked for updated drivers, firmware or Windows updates to date. Everything is up-to-date.

  However, my two-sided printing accessory is not recognized. I tried to do an update of the parameters, but the accessory does not appear in the drop-down menus.

  I learned by HP Technical Support that it is a Windows problem, but I can't quite believe that even Microsoft would come out an operating system does not recognize the material of the major manufacturer.

  Is that what everyone knows about this problem? Is this really a Windows glitch?  If so, is there a workaround solution that will allow me to do automatic duplex printing?

  pdef1949 wrote:

  Bob sent me an email with the patch, but I'm not sure I'm reading it correctly because the patch does not work. I got an error message that the printer driver has not been installed and he gave me a window to select options. I think it installs just the drivers of Bob wants to replace.

  In the e-mail to Bob, he said save the attachment as % temp%\hpo7x00t.gpd.  I don't know where to put this, and this is perhaps why the patch has not yet worked.

  Can someone tell me with certainty where to save the file?

  You just need to save the DPG file to a temporary location.  Folder is the location for temporary files of the system, it refers to a directory.  If for some reason it doesn't, you can do the following to the administrative command prompt:

  mkdir c:\temp

  [save the gpd c:\temp\hpo7x00t.gpd]

  then in the copy command:

  copy c:\temp\hpo7x00t.gpd c:

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Laptop Toshiba DVD RD/CD RW ROM not recognized after Vista installed

  My Toshiba laptop which has Windows Vista cannot read my ODD.  A month ago I had the same problem which was worst, could recornize not WEIRD at all.  Now, it recornizes ODD, however, after the execution of this program to fixhttp://support.microsoft.com/gp/cd_dvd_drive_problems, still reads at all.  Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ============================================================

  If necessary check with the help of Toshiba, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Ethernet controller & adapter not recognized, even with drivers

  I had installed a new hard drive and do a clean (no recovery cd) Win xp install on my R61.

  There are a lot of tracks. which are not recognized, so I wanted to use the Thinkvantage system update to solve the problems, but the ethernet controller and adapter are not installed correctly.

  I trye installation drivers I found on this page of lenovo:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-58618

  But after I ran the installer, as instructions say, the material is still not recognized...

  What can I do?

  Here's your Ethernet driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-67829

  After downloading, you must unpack it from the following directory: C > drivers > win > Ethernet

  Wireless:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-70504

  C > drivers > win > Wlanint

  I hope this helps.

• USB drives suddenly not recognized by Vista 64 SP2

  2 USB drives that work on another machine to Vista (32-bit) are not recognized and do not appear in my computer, but appear in 'remove hardware safely '. These USB drives has worked in my computer up to a week or 2 ago.
  When the disks are inserted a new item will appear in device ("storage volume") Manager who has a subelement ('generic volume') which has a yellow "!" which indicates a bad driver.
  The readers appear in disk management, but any attempt to change the drive letter or view properties gives an error "operation has not completed.
  Try to reinstall the drivers results in a message that the drivers are current, but the problem persists

  Hello

  Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
  more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
  C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
  If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
  and if doesn't work does not correctly return to this step.

  Check again once you advance through them.

  2nd check these:

  Operating instructions: find 'lost' Windows Vista drivers when you add a new device
  http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  -------------------------------------------------------------

  If no joy:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  --------------------------------------------------------------------
  Check this box:

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
  drive letter assigned is not the one you used to see. This may show of course not the
  Road at all, it's just a check.

  -------------------------------------------------------------------
  http://www.Uwe-Sieber.de/usbdlm_e.html
  Its complex however, the site has a lot of help.

  And all this?

  See also this thread and those it refers too.
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Xbox 360 controller is not recognized in Windows 7

  Moose title: Wired xbox 360 controller not recogniezed

  I recently received an xbox 360 WIRED gamepad and when I plug it into the computer (windows 7 64-bit) does not recognize the device, I tried to use the updates of drivers and microsoft Xbox 360 accessories program detects or updates are available.

  Pleas help!

  I had the same problem, cannot find a solution that worked everywhere, including Microsoft support forums.

  About to give up, I remembered the old cure NDA, shaped, "why not?"  I've tried everything else. "So I've disconnected everything on the gamepad, blew in every connection and reconnected everything, by ensuring that the connections were tight.

  It has worked perfectly since then.

• CD/DVD drive suddenly not recognized - under Vista Ultimate.

  I have a HP Pavilion running Vista Ultimate.  Recently it stopped recognizing my cd/dvd drive.  The regedit procedure does not help, because I have no UpperFilter registry entry.  Where should I go next?  Is there a link that will take me to more useful information?  I don't know how to get instructions for regedit go to "next steps". Thank you!

  What is the link you are looking for?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

• digital camcorder not recognized by vista

  I'm trying to import video from my canon mv300i via firewire.  So far I have

  1. install a pluscom 4port firewire adapter of controllerpci which has been recognized and appears in Device Manager and using the latest version of the driver 6.0.6001.18000.

  2 connect the camcorder, with a 6-4 cable, which recognizes the connection by displaying DV IN

  3. open movie maker who says ther is no device present

  4. verified AutoPlay, but no device listed

  I'm trying to import video from my canon mv300i via firewire.  So far I have

  1. install a pluscom 4port firewire adapter of controllerpci which has been recognized and appears in Device Manager and using the latest version of the driver 6.0.6001.18000.

  2 connect the camcorder, with a 6-4 cable, which recognizes the connection by displaying DV IN

  3. open movie maker who says ther is no device present

  4. verified AutoPlay, but no device listed

  ===========================================
  Perhaps the following goods range offers a few ideas:

  Windows Vista-
  Import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Windows Vista-
  Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  If the AutoPlay screen does not appear... What follows
  Articles may help:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  And... maybe the following will propose a few ideas:

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Mobile gamepad XBOX 360 not recognized when connected to a Windows 7 64 bit Home Premium computer USB ports

  Very well - so a few days ago (Saturday ~ 2) (25. 2012) I connected to my XBOX 360 (Wired) controller on my Toshiba Satellite L655 computer laptop with Windows 7 ~ Home Premium 64-Bit. To my surprise, a Notification bubble popped up from the taskbar, saying that the "unrecognized USB device. It has malfunctioned. "

  Naturally, I took, waited a few seconds, and then reconnect the USB key. The same message has popped up. Now, I was angry. Repeatedly, I took and reconnected it all a few seconds until that FINALLY the 4 green lights around the button Guide everything illuminated and then back except the one on the upper left, which was the way it should have been.
  I went to the control panel and clicked on the 360 controller to see if he had any input. Nope.
  I pulled out once more, has waited a while and plugged in. No, lucky. The same thing happened again. The Notification bubble came, all 4 green lights on and then all four of them died. I don't know what happened.
  When I plugged the controller to the laptop the FIRST FULL TIME, he installed all necessary drivers in less than a minute and I was on my way. Every time after that, I have taken the controller into the USB Port and began to play. Now all the time, that is to say that it cannot recognize the controller?
  I've tried everything, even a system restore. Nothing did. I've uninstalled and reinstalled the drivers for a few minutes, there was an entry of the controller, then he went just blank.
  I need this controller in order to play my racing games, seeing the keyboard control just aren't the best. I don't know what the problem is, but I wish I had a solution A.S.A.P. Please, Microsoft, please. Help me!
                                                                                                                          
  
  
  
  

  I had the same problem, cannot find a solution that worked everywhere, including Microsoft support forums.

  About to give up, I remembered the old cure NDA, shaped, "why not?"  I've tried everything else. "So I've disconnected everything on the gamepad, blew in every connection and reconnected everything, by ensuring that the connections were tight.

  It has worked perfectly since then.

• Satellite P100 - DVD burner and reader of SD card not recognized by Vista

  Hello everyone,

  I have improved my P100 of Xp to Vista and I can't make my DVD burner and my reder of SD (embeded to the laptop of course!) work.

  I can read CDs or DVDs, but I can't burn a DVD.
  My SD card reader in my device list but not appear in my browser!

  Even more, a 'mass storage' appears as not porperly installed but I have no reference on which device refer to the. Not to mention, I tried several times to install the utilities on the site Web of Toshiba sd but it didn't change anything...

  What laptop Satellite P100-xxx you have exactly?
  The number of extensions and model number would be very useful for further study

  Anyway. to get the card SD works in most cases you need to install the Flash Media driver
  In addition, it would be very interesting to know what SD card do you use.

  With regard to the Vista DVD burning issue;
  How have you tried to burn the DVD? Did you use special software to burn like Nero for example?
  Have you used different DVDs from different manufacturers of DVD?

  From my experience, it would be possible that the player manages all DVD. You try different DVD from different manufacturers. I had a good experience with TDKs

• Art of STOR E external 1.5 TB hard drive is not recognized by Vista

  I have a HARD drive that I brought in Europe, it was working fine and all of a sudden when I turn it on, is now telling me one of the devices USB has malfunctioned and windows does not recognize.

  I can hear the HDD spining, and you can feel the playhead to move when you turn it on, would that be a driver or a firmware issue?

  I have a lot of backup data about it as I can't afford to lose, then it would remove and put it directly into my computer to see if I can read it?

  > I can hear the HDD spining, and you can feel the playhead to move when you turn it on, would that be a driver or a firmware issue?

  You can try to connect to any other computer external HARD drive. If it would not then he s seems to be hardware problem.
  Of course, it is s to connect the HARD drive directly to a HARD drive controller to see if the BIOS recognizes the HARD drive maybe it would be your last resort

• Qosmio G20-205 PQ32: driver RAID is not recognized by Vista installation

  Hello, I try to isntall vista on my qosmio g20 205 (pq32) I downloaded the raid to the download driver toshiba driver and copied to a floppy disk when I poit to the path where the raid drivers, it does not recognize the drivers and says there are no drivers on the disc.
  What should I do?

  It is certainly the correct version of the driver downloaded here:
  http://de.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/Tracker.jsp?file=http%3A%2f%2fsupport.toshiba-tro.de%2ftools%2fqosmio%2fg30%2fvista%2fraid-drv-Vista-1100016.zip
  Thanks in advance

  Thanks for this information