Because of the archivelogs had places in + FRA diskgroup

Similar Questions

• Cannot start the database because of the archivelogs

  We use Oracle 11 g R2.
  
  We put the archivelogs on June 1, 2011. The archivelogs took all the space available on the server, so we got the error:
  Status: Opened but not available
  Details: Archive is unable to archive a redo log because the output device is full or inaccessible. The instance is open.
  
  I backed up the archives and remove them from the flash_recovery_area.
  
  Still, the database does not start. I had to stop immediately, but I can't connect through OEM or sqlplus.
  
  SQLPLUS was told that shutdown is not yet complete.
  
  OEM say status is wound down, but when I do a startup, I get this
  
  SQL > connect to an idle instance.
  SQL > SQL > ORA-01012: not connected
  Disconnected
  
  
  Can anyone help? It is urgent. There are many applications that run on the database.

  Elsie says:
  We use Oracle 11 g R2.

  We put the archivelogs on June 1, 2011. The archivelogs took all the space available on the server, so we got the error:
  Status: Opened but not available
  Details: Archive is unable to archive a redo log because the output device is full or inaccessible. The instance is open.

  I backed up the archives and remove them from the flash_recovery_area.

  Still, the database does not start. I had to stop immediately, but I can't connect through OEM or sqlplus.

  SQLPLUS was told that shutdown is not yet complete.

  OEM say status is wound down, but when I do a startup, I get this

  SQL > connect to an idle instance.
  SQL > SQL > ORA-01012: not connected
  Disconnected

  Can anyone help? It is urgent. There are many applications that run on the database.

  If you have removed the archivelogs at the operating system level, this fact was not in the rman catalog in the control file.

  c:> rman target /
  rman> crosscheck archivelog all;
  rman> delete noprompt expired archivelog all;
  

  And now you have remove these logs if you don't back them up you are sunk. Take a full backup immediately.

  Then put in your backup rman script commands to the archivelogs backup and remove them after that that they are saved. The details are in the documents to tahiti.oracle.com

  BTW, this is a community of volunteers. If you have "urgent" that you will need to open a SR with oracle and deal with people who are paid to deal with "emergency".

• It is safe to delete the archivelogs FRA?

  Hello

  I'm running an Oracle 12 c database and running a backup script every week:

  RMAN > BACKUP of DATA PLUS ARCHIVELOG;

  The archivelog should therefore be connected, no? Today I got an ora-00257. The current solution is to resize the area of 6 GB to 20 GB backup. But I guess it will grow only if I do not say on the subject.

  So I searched this forum and the web to find an adequate solution. I found a thread that recommends the race

  RMAN > overlap archivelog all;

  RMAN > delete all. expired archivelog

  I didn't run it without being sure of what will be removed. So I ran the overlap and the suite:

  RMAN > list expired archivelog all;

  It does not work... After some research, I discovered that the archivelog must be safeguarded in accordance with the retention policy that is currently on the default 1. Since there are already 3 full backups, why are there no expired archivelogs?

  How to remove the log file archive that they suggest to remove some files archive and run the overlap, but is this safe to do? I mean, they must be saved, because I used the command backup so archivelog, right?

  I'm open to suggestions. (I thought affecting conservation status 1 week should be good, but maybe you guys have better solutions).

  You mixed outdated and obsolete.

  Please check the discussion Re: what is the difference between the obsolete backups RMAN expried vs?

• I have the creative cloud (Photoshop and Lightroom) in my computer, but I had a problem of invoice, and because of that, I had to do, the association again change the registered credit card. But when I click to download shows error 82. How can I fix it

  I have the creative cloud (Photoshop and Lightroom) in my computer, but I had a problem of invoice, and because of that, I had to do, the association again change the registered credit card. But when I click to download shows error 82. How can I fix it?

  check your account and confirm your adobe, Adobe ID id

  log out and then back to your office to cc using the same adobe id allowing you to check your subscription is current, https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

• I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Anyway is to align the document even if it requires me to crop or lose

  I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Is there anyway to align the document even if it requires me to crop or lose some on the edges?

  Hi brad.

  Yes. You can use the analysis tools to straighten and crop your document. Here is a link to a new tutorial. The key to activate the sliding options recovery is to choose the option of the camera Image in the drop to Enhance, and gives you tools to set the correct page for smoothing areas.

  fundamental https://helpx.adobe.com/Acrobat/How-to/scan-Paper-documents-Searchable-PDF.html?Set=Acroba--principes t - create a pdf file

  Donna.

• I had requested to download for free, but do not want to buy program because of the price.  How can I cancel

  I asked for the free trial version, but do not want to buy this product because of the price.  How can I cancel and avoid being charged

  A trial is a trial. Unless you actually bought anything, there is nothing to cancel. If you put the "Buy now" button, contact the support sales to cancel the order.

  Mylenium

• Whenever I have to press the C key on the keyboard if move my crursor at the beginning and place the letter C

  must always go back and remove the letter c and then place the cursor back to were I had left to and try to type the letter c again in the right place. I'm going there about 5-10 times before it will not send the cursor at the beginning and place the letter where it should be.

  Hi windancer,.

  It may be a problem of keyboard as Richard suggested.  If it's a laptop, it may be that you hit the touchpad when you type.  I suggest this because I used to do that myself when entering some letters on my laptop.

  If this is the case, there may be a control panel option to disable the touchpad when you type, or you could try to install something like touchfreeze (http://code.google.com/p/touchfreeze/), who will do exactly that.

• Reference DELL Modular Disk Storage Manager cannot see MD36xxf because of the version of the firmware to high

  I have a DELL MD3600f that is connected to a DELL R710. The system was all the installation and work programme, but the OS disk has become corrupted and had to be rebuilt. The system has not all backups, because it was still under construction. The problem is that a system administrator updated the Firmware on the MD3600f to the 07.80.41.60 version. According to the notes the versoin of DELL PowerVault MD Series Storage Software Resource DVD 3.0.0.18 or later must be installed before update the RAID controller firmware.

  Problem is the update of the firmware is already in place and the MD storage software cannot talk to the MD3600f now because of the correspondence of Miss firmware.

  No matter how lucky it is a updated software storage MD there? I tried low grade firmware, but that has been denied.

  Why not give the link to the latest version; 4.1.0.88?

  This is available at en.community.dell.com/.../4234.dell-powervault-md-downloads.aspx.

• Purge the Archivelogs Dataguard

  Hi all

  11.2.0.3

  How can I set up my database PRIMARY and STANDBY auto purge all archivelogs (both primary and standby) already applied in waiting?

  While I don't have to worry about full archivelog in my FRA.

  Thank you all,

  pK

  Hello

  You should not care about people not confident in this respect.

  See the blog post I linked above. There is a bug in 11.2 and there is a solution. And there is a request to check when the archivelogs recoverable or not.

  I put in place that to several customers, where there is no 'archivelog delete' at all and Oracle manages the FRA. Just be sure that one of the following is executed frequently

  either RMAN > sql "begin dbms_backup_restore.refreshagedfiles; end; « ; or rerun the CONFIGURE ARCHIVELOG

  In any case, it is good to monitor the use of FRA of space, then you should be alerted if they are not purged as you want.

  Kind regards

  Franck.

• The FRA diskgroup separate for each prod database?

  Hello

  Env: Oracle 11 g 2 EE (11.2.0.3), 6.2 RHEL 64 bit

  Storage: file system

  Databses: ten databases on the PROD and 20 on the DEV

  I have two existing servers with above configuration - a DEV and a single PROD. I have to move all of the databases from two servers to new servers.

  I have two options. Configure the servers again exactly the same way (same software oracle, same mounts-points, directory structures, etc.) and move/copy the databases above. The other option is to use ASM for storage instead of file system.

  Customer asks a diskgroup FRA separate for each DBA database. His reason is that if the FRA gets filled by archivelogs because of some process in the databases, all databases stops responding.

  • It's a legitimate concern and what is the best way to deal with this kind of situation?
  • Should I create a diskgroup FRA separate for each database?

  The archivelogs are backed up every 20 minutes for each PROD database.

  Please advise!

  Best regards

  You can limit FRA for each database with the parameter DB_RECOVERY_FILE_DEST_SIZE.

• "Backup canceled because all the files were ignored"

  Hello
  
  I'm performing backup of database by using the following command:
  
  Run {}
  allocate channel c1 device type disk;
  database backup incremental level 0 more entered archivelog delete;
  output channel c1;
  Validate restore them database;
  }
  
  While they inspected the RMAN newspapers, it ends, and I can say that it is a good backup. I can also list the components of backup that has been backed up. After this step, I want the flash_recovery_area on a backup tape, I used this command:
  
  Run {}
  allocate channel t1 device type sbt;
  BACKUP RECOVERY AREA;
  REMOVE the TYPE of DEVICE OBSOLETE sbt;
  output channel t1;
  }
  
  When I do that, I get this message from the newspapers, and I see not all tape backup:
  
  -NEWSPAPERS-
  allocated channel: t1
  channel t1: SID = 503 device type = SBT
  channel t1: Oracle Secure Backup
  
  From 23 July 11 backup
  Specification does not match any newspaper archived in the recovery catalog
  Specification does not match any data file copy in the repository
  Specification does not match any backupset in the repository
  backup cancelled because all the files were ignored
  Backup finished July 23, 11
  
  RMAN retention policy apply to the order
  RMAN retention policy is set to 7 days recovery window
  not found obsolete backups
  
  output channel: t1
  
  RMAN >
  
  I don't understand why I get this message when in fact, I archivelog and datafile backupset saved in my FRA. Any ideas?
  
  Thank you!

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK to 'C:\oracle\flash_recovery_area\PROD\AUTOBACKUP\%d-%F ';
  CONFIGURE CHANNEL DEVICE TYPE DISK MAXPIECESIZE 2 G FORMAT 'C:\oracle\flash_recovery_area\PROD\BACKUPSET\%d-%T-%U ';

  When you specify a FORMAT, Oracle takes this format as the backup location. It may happen to be physically identical to your FRA, but it is not logically the same as your FRA.
  A BACKUP RECOVERY AREA is not 'find' these backups because they are not logically in the FRA.

  You will also find that Oracle automatic management of the FRA (where it automatically removes OBSOLETE etc backups) will not work against these backuppieces - once again, because they are "not in the FRA.

  A good backup RMAN that goes to the FRA relies on 'db_recovery_file_dest' (and "db_recovery_file_dest_size"). This is set up, a simple "BACKUP DATABASE" (or "BACKUP AS COMPRESS BACKUPSET DATABASE") will create BackupSets in the FRA. It will automatically create the appropriate folder structure (each day is a new folder). Controlfile AutoBackups, too, should use the FRA.

  See the Oracle support Article: 'configuration correctly the box Flash recovery to allow the release of recoverable space [ID 316074.1] ".

  Hemant K Collette

• My canon mx892 won't print because of the error U052.

  our mx892 of canon do not print because of the error U052.  I followed all the steps suggested for this problem with a MX700, but it has not fixed the problem. now what?

  I replaced the printhead, according to your instructions, several times, but again, the error message occurs and won't let me use the menu button yet.  The red light on the ink cartridge "M" flashes slowly rather than stay on.  Also, your instructions omitted a step: remove all the ink cartridges before you lift the print head lock lever.

  This error message is come that I used the printer to print and I had not removed the print head or replaced the cartridges.

• Software Bloggie Touch does not work because of the DEP - I can't turn off DEP for this program

  Original title: software Bloggie Touch does not work because of the DEP

  I downloaded the Bloggie Touch (Sony) software, but the function of prevention of execution of data in Windows Vista prevents me from using it. Any suggestions? I contacted Sony and they had me re-download the software on their site, but it did nothing. I tried to reset the DEP to allow the Bloggie software, but he says that the processer wouldn't let me do that. Message: I can not turn off DEP for this program.

  Any help would be appreciated.

  Hello
  the only other thing you can do is to do a Bing search for how to turn off dep.
  There are several options (not recommended by the way)
  b Eddie

• Restore failed image because of the message error "system cannot find the specified file (0 x 80070002). Is my file of the backup OK folder structure?

  I had to reinstall clean Windows 7 64-bit because of the failure of the RAID 1. I have a picture of my original installation system, but I can't restore it; everything I try, I get the message "system cannot find the specified file (0 x 80070002).  I work through a number of possible solutions, without success so far.

  According to the kb/951002 (that is for Vista but I can't find an alternative for Win 7) I made sure that the SYSTEM account has read permission for the backup folders and subfolders.  However, the file structure of the specified in the above article backup folder is different from my image file structure.  Specifically, article specified a structure of 'N.zip' file for the backup files but mine are a mixture of XML documents and VHD - i.e. no "zip" files Also, my GlobalCatalog file does not what kind of file, for example, it wouldn't ".wbcat" required file type specified in the article.

  The differences above could explain the inability to restore the image and if so, any ideas on what to do about it?

  Kind regards

  Ian

  Thanks Mick, will redirect the request.

  Kind regards

  Ian

• I can't install Microsoft. NET Framework 4.0 because of the error (0xC8000222)

  I can't install Microsoft. NET Framework 4.0 because of the error (0xC8000222), so for this reason, I can't install Kaspersky Internet Security 2015, suggestions...

  Hi Ryan,

  Thanks for posting your query in Microsoft Community.

  I understand that you can not install .net Framework 4.0 whereby you are unable to install the Kaspersky Internet Security software and I'll be happy to answer your query. Let me ask you;

  • How you try to install .net Framework 4.0?
  • Are you can install other updates?
  • What is the exact error message that you receive when installing .net Framework 4.0?
  • Is there any previous Internet Security installed on the computer software?

  There could be several reasons for not being able to install any program or update including any third-party software conflict, corruption of Windows Installer, Windows updates the corruptions of components etc. Please, try the following methods and check.

  Method 1: If you try to install .net Framework through updates, try using the Windows Update Troubleshooter to fix the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Method 2: Put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 3: You can reset the Windows Update components and check the status.

  To automatically reset the Windows Components update, run the fixit in the article below. If the Fixit does not work, you can try the manual steps and check.

  How to reset the Windows Update components?

  Method 4: Fix the .NET Framework

  Download the Microsoft .NET Framework repair tool to repair the following versions of the .NET Framework, and then reinstall the update of the .NET Framework.

  Method 5: Uninstall and reinstall the .NET Framework

  To do this, follow these steps:

  1. Discover the .NET Framework Cleanup Tool User Guide.
  2. Download the .NET Framework cleanup tool.
  3. When you are prompted, click Open, and then click retrieve now.
  4. In which you extracted the files, double-click cleanup_tool.exe.
  
  If you are prompted for an administrator password or for confirmation, provide the password, and then click continue.
• In the Do you want to run the .NET Framework Setup Cleanup Utility? message, click Yes.
• Click Yes to accept the license agreement.
• In the window cleaning product , click the list, select .NET Framework - all Versionsand then click clean up now.
  Note the cleaning tool does not remove the .NET Framework 2.0 in Windows Vista or later versions of Windows because the .NET Framework is installed as a component of the operating system.
• After the .NET Framework is removed, restart the computer.
• Download and install the following components:
  The .NET Framework 1.1

  The .NET Framework 1.1 Service Pack 1 (SP1)

The .NET Framework 3.5 Service Pack 1 (this will also install the .NET Framework 2.0 SP2 and the .NET Framework 3.0 SP2)

• Restart the computer.
• Visit Windows Update again, and then review and install the updates.
• Try to reinstall the update of the .NET Framework.

Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.