BEFSR41 corrupt 4.3, don't reset, please help

Similar Questions

• Windows 7. The left panel of the start menu icons cannot be removed and arrows don't work - please help!

  The left panel of the start menu icons cannot be removed (when I press "remove from this list" nothing happens) and arrows (see illustration) do not work, that nothing is displayed - please help!

  

  Try https://support2.microsoft.com/mats/system_maintenance_for_windows/

  If this doesn't help not try to reset the start menu by default:

  1. Right-click on the Start button and click on properties.

  2. Click the Start Menu tab, and then click Customize.

  3. In the Customize Start Menu dialog box, click on use settings by default, click OK, and then click OK again.

• Windows xp pro sp3 will not start corrupted boot.ini and hal.dll - please help

  I installed Norton 360 offred via internet was last updated.  It immediately launched all applications previously disabled at STARTUP in msconfig.  And shortly after he started to gives me the blue screen "to the death".  This done in two days, and I was desperately trying to solve the problem by turning off almost all applications critical to running Windows XP Pro SP3, Norton and Office 2007 Home and student.  I even went and tried to edit the Boot.ini file in startup and recovery under the Advanced tab in the workstation properties.  Now all I get is an error message Windows cannot start because the hal.dll file is missing or damaged.  I replaced it by copying a modified version of the boot sequence, while the hard drive of my laptop was enslaved to my desktp PC, but nothing helped.  I can't even the Recovery Console to start on my laptop.  I need HELP, please.

  These profile errors are usually caused by one of the following:

  1-profile corruption.  The user profile is damaged and that Windows cannot load.  To resolve this issue, create a new user profile and move your files to the new profile.   See here for more information:

  How to copy data from a corrupted to a new profile in Windows XP user profile

  2 drives or corruption of the file system.  Run chkdks /f on the volume C:.  Please note that there is ALWAYS a risk of data loss when chkdsk is run on a volume, ideally, you should have a backup of your files before running chkdsk.

  3 - virus or malware activity.  Some of these parasites can revoke your permissions on the folder of your profile, check the permissions on "C:\Documents and Settings\Andre" and make sure you have a full control on the folder.  Check this box until you try #1 or 2 above.

  Some of these parasites can also revoke your permissions in key areas of the registry and create real Dany on the machine that can prevent you to run some of your software.  Use Regedit to load your old profile hive (NTUSER. (DAT) in your profile folder (C:\Documents and Settings\Andre\NTUSER. (DAT) and make sure you have full control over the key.  In the advanced security settings to ensure that the child objects are inherit permissions from the parent and put a check mark on "replace entries permissions for all child objects...". "Click on apply and OK your way out.  See here for easy to follow instructions for loading and editing of remote registry hives: http://www.rwin.ch/xp-live/regedit.htm make sure you unload the hive when you're done, otherwise the changes will not be saved.

  These parasites can also revoke permission on the other key of registry and system files, you can use SubInACL to restore your permissions on these key objects, see here for more information:

  Solve installation errors using the SubInACL tool to repair the file and registry permissions

  John

• BIOS password reset please help

  Hello.  I have a laptop that I am trying to erase and re - establish.  It was given to me and it turns out it's a locked BIOS.  Three unsuccessful password attempts gives a screen locked.

  The laptop is a HP Compaq 8710p

  The P/N is #ABA KR886UA

  Any help on this would be highly appreciated.

  K.

  Hi MrToaster...

  I'm sorry that you are having a BIOS password problem with your 8710p.

  Reset the password is quite simple and is covered in Chapter 4 of the Guide Service and Maintenance:

  1. Shut down the computer. If you don't know if the computer is off or in hibernation, turn on the computer and then stop it through the operating system.
  2. Disconnect all external devices connected to the computer.
  3. Turn off the power to the computer first, unplug the power cord from the power outlet and then unplug the power adapter from the computer.
  4. Remove the battery (see battery on page 50).
  5. Remove the battery from the time clock (RTC) (see battery RTC page 80) real.
  6. Wait about 5 minutes.
  7. Replace the RTC battery and go back to the computer.
  8. Connect the power to the computer. Replace any battery at this time.
  9. Turn on the computer.
  10. All passwords and all CMOS settings have been cleared.

  IMPORTANT NOTE: As shown in #10 above, this will also clear the CMOS memory on the computer!

  If you are not comfortable performing these steps, contact HP support for your country / region and they can help you in getting the machine.

  I hope this helps!

  WARNING: I am an employee of HP, but I am not a spokesman for HP.

  • If you found this information useful, please take a moment to click on "accept as a Solution.
  • If you do not want to say thank you, please click on the star of congratulations!

• Satellite Pro A120 - don't light - please help!

  OK, bought a new power supply, about a week ago (this could be the problem!) -on eBay and it was cheap. Laptop worked fine for a week or so, but now I get nothing from it. After activating the button walk / stop, the laptop does nothing - no fan, just a little click and a faint sound of snoring. The screen remains black. The front lights show green static when it is turned on. When I turn on with just battery, it shows orange. Any ideas, what could be wrong (and if I've done a mischief by buying an incongruous cheap adapter!). Thank you!

  Hey Buddy,

  Have you bought an AC/DC to original Toshiba adapter or is it a 3rd party party?

  What I found is this:
  Steps to follow if your Toshiba laptop does not start?

  Theoretically the AC/DC adapter could cause such problems, but now it s too late. That is why a s why it s advisable purchase Toshiba original spare parts. ;)

• My Iphone 6s is not letting me do the hard reset, please help.

  I tried to sleep-press and hold down the button at the same time for more than 10 seconds, but she doesn't as it turned off my phone automatically. Does this mean that something is wrong with my hardware, there used to work when I got this new phone about a month ago. What should I do, is it fixable? I tried to do this process several times already. I noticed that I could not do that more when I tried to see if I could do the hard restet.

  Sometimes, it can take more than 10 seconds for the reset to work. It can sometimes take 30 seconds or more. You must hold the two buttons together until you see the Apple logo, ignoring the slide to power off of the screen if you see.

• I can't watch videos on hulu or abc or any other site more, they don't load, please help

  I can't watch videos on hulu sites and network such as cbs or nbc.com.  Just yesterday, I watched and quickly loaded everthing.  Now, I can't load videos at all.  I ran my virus program, done a defrag, called my ISP to see if any problem there and there are none I also tried windows update and still not bring one of my shows to load, I say well flow because they are not downloaded they are listened to.

  Any advice would be appreciated, of course.

  Thank you
  Michelle

  You can browse the internet using Internet Explorer?
  You are using a wireless connection? (if so, connect the computer to the router and see if it's still a problem)
  You receive error messages?

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why? I don't know, please help me

  

  can you guys help me?

  Contact technical support by phone.

  Mylenium

• I can NOT INSTALL flash player 10!  myspace player does not work, but youtube don't. PLEASE HELP ME

  I can't listen to music on Myspace more!

  It says that I need the new version of flash player for it. So I go on the site Web of adobe is trying to install the Flash player 10.0.022.87 nothing happens, in fact the box asking me if I want to install appears, but after that, nothing happens.

  The strange thing is that I can perfectly to watch videos on YouTube and play games flash as well. I know that Myspace is not the problem because everyone that I have spoken, said the Myspace player works fine.

  I hope you can help me. Thank you

  PS: I use Internet Explorer 8 and Windows xp

  Try the ActiveX Installer in offline mode, as follows

  • Download uninstaller http://www.adobe.com/go/tn_14157_fr FP

  • Close all browser windows and start the program uninstaller (to uninstall previous versions of PS)

  • Download the FP for Internet Explorer installation program:

    • http://fpdownload.Macromedia.com/get/flashplayer/current/Install_flash_player_ax .exe

  • Close all browser windows and run the install (s) downloaded

  To verify successful installation, go to

  http://www.Adobe.com/software/Flash/about/

• Cannot get windows 10 please help

  Hello, I recently built a PC after my laptop broke so I used the recovery disks on my new PC, but it does not install the necessary drivers then I hit the windows key and close, it is when I turn on my PC it pops up every time I tried to Sysprep was not working when trying to upgrade to windows 10 is not national work I'm in mode "check". , I tried to delete the value of the image, it just resets please help if you have an idea thanks.

  OEM of Windows versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  You must purchase a license of full version Windows 10 and perform a clean installation:

  Homepage Windows 10: upgrade or purchase - Microsoft Store

  or

  Windows 10 Pro: upgrade or purchase - Microsoft Store

  review

  How to: perform a clean installation of Windows 10

• I can't get Firefox to restore the normal size. I tried everything, including put it back. Only some pages Web like Facebook is great & it will not be reset, but in IE, it's normal. If it please help because I hate IE & really don't want to use it

  When I open Facebook and a few other Web pages, the size of the screen is large and some of the information is not displayed. I have tried everything to reset the size and it does not work. I even zoom and missing information have not appeared. But if I connect in IE is fine and all the info is there and are usable. I hate IE and do not want to use then please help me to solve this problem with Firefox.

  You can rename the file happy - prefs.sqlite content - prefs.sqlite.old (or remove the file) in the profile folder to reset the zoom on every site page.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

• I forgot my password to log on to my laptop I don't have the disk to reset, and quite honestly I can't afford it I need it a.s.a.p please help me!

  PLEASE HELP ME WITH THIS QUESTION, I NEED TO GET ON MY LAPTOP RIGHT VERY IMPORTANT. Thank you very much

  PLEASE HELP ME WITH THIS QUESTION, I NEED TO GET ON MY LAPTOP RIGHT VERY IMPORTANT. Thank you very much

  Unfortunately, we are not allowed to help users to bypass the password protection, regardless of what are "reasons".
  Here's the Microsoft Policy about this:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Hi Please help me B1-711 were break and I don't have any apk rom? What should I do?

  Hi Please help me B1-711 were break and I don't have any apk rom? What should I do?

  It may start at Acer logo?

  If so try to factory reset using the key combination:

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/29892/~/Acer-Iconia-B1-A71-and-B1-710-factory-d...

  the download of rom is for version ww_GEN1:

  Acer.AV0K0.B1 - 711.RV02RC05.WW.GEN1

  must be updated via microSD update

  http://global-download.Acer.com/GDFiles/OS/OS/OS_Acer_Acer.AV0K0.B1-711.RV02RC05.WW.GEN1_A44K_A.zip?...

• My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my e-mail is _ @_. ___

  My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my email is * address email is removed from the privacy *

  The people who answer questions here are, for the most part, volunteers who have no connection with Microsoft.  Ask your question every two minutes won't get you a faster response.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the spooler print don't rest not always running after you launched the command "net start spooler", follow these steps

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window
  dependent on the spooler of sc config = RPCSS
  net start spooler

  If the spooler still will not start, you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm