Best encryption 2 lanes available on BB10?

Similar Questions

• X 51 R3 and graphics amplifier - lanes available PCIe?

  I have a X 51 R3 with an i7-6700 inside for a processor, a 960 in the PCIe slot GTX GPU internal and a graph connected with a GTX inside 1080 amplifier. With the GTX installed 960, 960 a 16 lane PCIe available and GPUz shows it connected like this, and the 1080 has only 2 channels available PCIe and shows that it connected like that. When I remove the 960 internal 1080 in the graphic amplifier shows that it is connected via PCIe 3.0 x 4-4 lanes available.

  Why would this be the case? Is there a solution?

  Hello

  The amplifier supports up to x 4. There is a new BIOS from up to fix the x 2 single behavior during its use. Sorry for the inconvenience. Keep control of our main support site, the update will be displayed here.

  Just make sure that you use the version of the driver 368.39.

• What is the best ffos device currently available in terms of hardware such as display, the camera and the processor?

  
  

  Hi, as available in the trade with firefox os devices are largely a low-end market-oriented, probably the best phones with firefox os you can get is a link 5 or the sony xperia z3, which can be flashed with firefox os: https://firefoxos.mozilla.community/devices

  Edit: the sublime spec firefox real phone os was the fx0 lg which is available on amazon in the United States for 60USD atm: http://www.amazon.com/gp/product/B00UULNTHK

• Geolocation is available for BB10?

  Hello

  I am an experienced developer of BB, which is now moving to BB10. I attended a BBJam event last month, and I had the chance to win a BB Dev Alpha device. I'm working on a Native C++ Cascades application that reads GPS information. I used the following code to get the geolocation data, but I never receive any event. The code remains on bps_get_event (this code blocks, so as long as it receives no events there). Note that I tested my application on the actual device (Dev Alpha):

  void GpsApp::listenForGpsEvents() {
      int rc = BPS_FAILURE;
  
      // Initialize access to the BPS system
      rc = bps_initialize();
      if (rc)
          return;
  
      // Register to receive GPS Events - if we can't then we can't proceed any further
      rc = geolocation_request_events(0);
      if (rc)
          bps_shutdown();
  
      // Get geolocation events once a second, which is the most often that they
      geolocation_set_period(1);
  
      // Pointer to the event that will be dequeued
      bps_event_t *event = NULL;
  
      // Infinite loop for the moment
      while(1) {
          // Blocking wait ( -1 ) for BPS events (including geolocation events)
          rc = bps_get_event(&event, -1);
  
          if (!rc) {
              if (bps_event_get_domain(event) == geolocation_get_domain()) {
                  // Handle GPS event
                  handleGpsEvent(event);
              }
          }
      }
  
      // Stop geolocation events
      geolocation_stop_events(0);
  
      // Close access to the BPS system
      bps_shutdown();
  }
  

  Also note that I added the code to listen for events of accelerometer as well and it works great. Do you know if geolocation is available on the current version of the NDK or should I wait the next version of NDK?

  Thank you

  Hello, I wanted to make you aware that there is a problem recorded in the Jira system on geolocation problem that you are experiencing.

  Compared to the Playbook, the alpha BB10 device is much slower and less sensitive to the reading of the events of geolocation. You can comment or vote on the matter to

  https://www.BlackBerry.com/jira/browse/BBTEN-8

  See you soon

  Swann

• BlackBerry Z10 best solution for Google Drive on BB10 (Z10)

  Hi all

  Just after some advice. I need to get my Z10 BlackBerry sync with my GoogleDrive files.

  What is the recommended application to use as Google or BlackBerry have not resulted in an official solution

  Thank you very much

  Ben

  You will get a number of recommendation, but here's the first, and in my humble OPINION the best.  Playcoud (available in the world of the BB).  Playcloud takes in charge Google Drive, box, Dropbox, OneDrive (formerly SkyDrive) and many more services.  If you have activated the Remote File Access in BB link, you can also access your desktop through her files. It also acts as a file manager for your card device and mSD.

  I hope this helps.

• Cannot see wireless LAN available on Tecra A5 but ok with Tecra M5

  Hello
  I have the following problem:
  I have an access point (DWL-3200AP) DLink wireless set up in my office.
  On my laptop, I can see my WLAN and I'm able to connect with my Tecra M5.
  I can see the WLAN on the tool graph configfree.
  Now the problem... I bougth a Tecra A5 for my boss, everything works well... The radio is active...
  OK wireless card... BUT I don't see the WLAN... can't find it...
  I've checked everything but I do not know why...
  Is someone can help me?
  THX
  Math.

  I suggest you check the settings of the router.
  To my knowledge a lot of WLan routers supports a WLan option cache.
  In this case, the WiFi network is not visible and you must know the name of the WLan to search.
  I think you know the name of the WLan so I recommend entering the wireless network connection properties, and then selecting the wireless networks tab.
  There you can add preferred networks. You must enter the WLan name and encryption.

• What is Microsoft's best practices and utilities available for conversions P2V and V2V for Hyper-V, without using SCVMM?

  As a Partner of MS we recommend Hyper-V as the platform of choice virtualation for our SME customers. What does Microsoft recomemend and are available for P2V and V2V for Hyper-V conversions without using SCVMM most SMEs do not have access to

  concerning

  David

  Hi David,
  I advise you to post this question using the link below.
  TechNet is for the professionals of the company and the server, so I don't know that anyone in this community will have some information about this.
  http://social.technet.Microsoft.com/search/en-us/?refinement=112&query=P2V%20and%20V2V%20conversions
  B Eddie

• What are some of the best Internet Security Suites available?

  I ask this question because my subscription with McAfee Total Protection 2009 is in place, and frankly, I was very unhappy with it, so I do not anticipate use of McAfee products. Microsoft Security Essentials would be a good option, but it doesn't have a scanner IM that I need. I'm looking for something that can provide optimal security without any serious impact on performance.

  Hello

  This is to add to the good advice of TG.

  Here's what I use and recommend:

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Best way to display availability for the booking system

  Hello

  I currently have a form with a menu drop-down allowing users to select the number of seats that they would like to book.

  Currently, the field reduced from 10 to 0 in conjunction with the number of seats available.

  The problem is that I add another variable to the scenario whereby the same field will reduce if the parameter 'event' affirm that only a certain number of seats can be reserved per transaction.

  There are 2 variables:

  -$seats_available (that's the number of seats have not yet been booked)

  - $row_prod_detail ['seats_per_booking'] (how many seats is allowed per transaction)

  I tried to add an OR statement in the form field, but it returns 1-5 and 1-10, that everything in the menu dropdown-> resulting in 15 options.

  Here's the code for form field:

  
  

  < label for = "quantity" > < / label > < select name = "quantity" id = "quantity" class = "quantity_dwfield" > < option value = "-1" selected = "selected" > amount seats < / option > < option value = "-1" > - < / option > <? PHP if ($seats_available < = 10 | $row_prod_detail ['seats_per_booking'] < = 10) {? >} <? PHP if ($seats_available == 0 | $row_prod_detail ['seats_per_booking'] == 0) {? >} < option value = "" > No. seats left! < / option > <? PHP}? > <? PHP if ($seats_available == 1 | $row_prod_detail ['seats_per_booking'] == 1) {? >} < option value = "1" > 1 < / option > <? PHP}? > <? PHP if ($seats_available == 2 | $row_prod_detail ['seats_per_booking'] == 2) {? >} < option value = "1" > 1 < / option > < option value = "2" > 2 < / option > <? PHP}? > <? PHP if ($seats_available == 3: $row_prod_detail ['seats_per_booking'] == 3) {? >}

  < option value = "1" > 1 < / option >

  < option value = "2" > 2 < / option >

  < option value = "3" > 3 < / option >

  <? PHP}? >

  <? PHP if ($seats_available == 4 | $row_prod_detail ['seats_per_booking'] == 4) {? >}

  < option value = "1" > 1 < / option >

  < option value = "2" > 2 < / option >

  < option value = "3" > 3 < / option >

  < option value = "4" > 4 < / option >

  <? PHP}? >

  <? PHP if ($seats_available == 5: $row_prod_detail ['seats_per_booking'] == 5) {? >}

  < option value = "1" > 1 < / option >

  < option value = "2" > 2 < / option >

  < option value = "3" > 3 < / option >

  < option value = "4" > 4 < / option >

  < option value = "5" > 5 < / option >

  <? PHP}? >

  <? PHP if ($seats_available == 6: $row_prod_detail ['seats_per_booking'] == 6) {? >}

  < option value = "1" > 1 < / option >

  < option value = "2" > 2 < / option >

  < option value = "3" > 3 < / option >

  < option value = "4" > 4 < / option >

  < option value = "5" > 5 < / option >

  < option value = "6" > 6 < / option >

  <? PHP}? >

  <? PHP if ($seats_available == 7 | $row_prod_detail ['seats_per_booking'] == 7) {? >}

  < option value = "1" > 1 < / option >

  < option value = "2" > 2 < / option >

  < option value = "3" > 3 < / option >

  < option value = "4" > 4 < / option >

  < option value = "5" > 5 < / option >

  < option value = "6" > 6 < / option >

  < option value = "7" > 7 < / option >

  <? PHP}? >

  <? PHP if ($seats_available == 8 | $row_prod_detail ['seats_per_booking'] == 8) {? >}

  < option value = "1" > 1 < / option >

  < option value = "2" > 2 < / option >

  < option value = "3" > 3 < / option >

  < option value = "4" > 4 < / option >

  < option value = "5" > 5 < / option >

  < option value = "6" > 6 < / option >

  < option value = "7" > 7 < / option >

  < option value = "8" > 8 < / option >

  <? PHP}? >

  <? PHP if ($seats_available == 9: $row_prod_detail ['seats_per_booking'] == 9) {? >}

  < option value = "1" > 1 < / option >

  < option value = "2" > 2 < / option >

  < option value = "3" > 3 < / option >

  < option value = "4" > 4 < / option >

  < option value = "5" > 5 < / option >

  < option value = "6" > 6 < / option >

  < option value = "7" > 7 < / option >

  < option value = "8" > 8 < / option >

  < option value = "9" > 9 < / option >

  <? PHP}? >

  <? PHP if ($seats_available == 10: $row_prod_detail ['seats_per_booking'] == 10) {? >}

  < option value = "1" > 1 < / option >

  < option value = "2" > 2 < / option >

  < option value = "3" > 3 < / option >

  < option value = "4" > 4 < / option >

  < option value = "5" > 5 < / option >

  < option value = "6" > 6 < / option >

  < option value = "7" > 7 < / option >

  < option value = "8" > 8 < / option >

  < option value = "9" > 9 < / option >

  < option value = "10" > 10 < / option >

  <? PHP}? >

  <? PHP}? >

  <? PHP if ($seats_available > 0 | $row_prod_detail ['seats_per_booking'] > 10) {? >}

  < option value = "1" > 1 < / option >

  < option value = "2" > 2 < / option >

  < option value = "3" > 3 < / option >

  < option value = "4" > 4 < / option >

  < option value = "5" > 5 < / option >

  < option value = "6" > 6 < / option >

  < option value = "7" > 7 < / option >

  < option value = "8" > 8 < / option >

  < option value = "9" > 9 < / option >

  < option value = "10" > 10 < / option >

  <? PHP}? >

  < / select >

  
  

  
  

  Any help would be much appreciated!
  

  I've never actually created a loop in my life! I know; disappointing.

  How would I go to do this? I saw a few tutorials, but none of them does solve several variables (the show something like 0-10, but not 10-0 as a default and change if one of the variable becomes less than 10)

  The loop must:

  • Show 1 to 10 if BOTH $availability AND $seats_per_person are MORE than 10
  • Display 1-x if EITHER $availability OR $seats_per_person are below 10 (Eg. If $seats_per_person is limited to 3, then the loop will go from 1-3 If $availability is 1, then regardless of the cap $seats_per_person (out of 3) he only show 1)

  EDIT:

  That's what I got. It seems to work, but I'm doing something I shouldn't? like formatting / organizational wise?

  Quantity of seats ---------- <> for ($i = 1; $i ++) {} ?> <> If ($i > = 10) {} break; } {If ($i > = {$row_prod_detail ['seats_per_booking'])} break; } If ($i > = $seats_available) {} break; } } ?>

• How to track the total number of downloads of my app BB10

  Hello

  I'm not sure of this is the right section to post in, but it's the best I could find.

  I want to track the total number of downloads of my BB10 APP on the blackberry world. Download report is very simplistic and just generates a chart leaving me count manually. I tried also to export the data to download to Excel. While this works, it is a bit heavy. Is there another way for me to be able to view these data easily right now? Or do we have to wait for the SDK analytical tool to be made available for BB10?

  Thank you

  Take a look at this that maybe that's what you're looking for...

  http://www.appworldreport.com/

• Satellite A100-253 - question on the display, the sound and LAN drivers

  After getting a fresh installation (windows XP) on my Satellite A100-253, I thought that I needed the latest drivers. Apperently the drivers from the Toshiba site are obsolete or do any work.
  Here are my problems:

  -Display drivers is not installed at all. Instead, I installed the Catalyst drivers from another site but the resolution will not go higher then 1280 * 800, where my screen works better @ 1280 * 1024. Where can I get decent display drivers so I can put a normal resolution?
  -J' downloaded audio drivers on the Toshiba site but the sound is worse then it was. Where can I get the best drivers?
  -LAN (no WIFI) drivers on the Toshiba site seem to only have a uninstall.exe. Where can I get for my local network actual installation files?

  Thanks for the help in advance.

  Born the

  Hello!

  1. drivers you can get on the site of Toshiba or live production.
  Where did you download the drivers?
  Maybe a BIOS update will solve the problem.

  2. it of the same as point 1; Toshiba or directly to manufacturing.
  But don t forget a notebook is not an entertainment system, and if you want high quality sound you need external speakers.

  3. this package contains the actual installation files, but you must install them manually. This may make you in the device, right click on LAN card Manager and update the driver.

  Good bye

• ENVY of HP dv7 - 7398ca Notebook PC: best card Compatible WIFI Upgrade

  I want to upgrade my DV7 laptop WIFI card.

  Can it currently run on a Ralink RT5390R 802.11bgn Wifi adapter.

  I would like to find the best (fastest) possible map available with all the bells and whistles on it. (Bluetooth and whatnot)

  Also, is there a word of any new maps coming out in the near future?

  Thank you in advance.

  Hello

  Your machine was built in 2012, tha chance to upgrade wifi card is very slim to none. Please check a list to page 7 of the following book:

  http://h10032.www1.HP.com/CTG/manual/c03591253.PDF

  Kind regards.

• Xperia Z5 will be available across Canada from October 29.

  The Xperia Z5 with best smartphone Sony camera, launches October 29 exclusively with Bell Mobility

  MONTREAL TORONTO & 20 October 2015 /CNW/ - Sony Mobile Communications ("Sony Mobile") and Bell today announced the exclusive launch of the smartphone generation Sony Xperia Z5 on largest network LTE 4 G of the Canada. With Sony camera technology and integration powerful entertainment, Xperia Z5 will be available across Canada from October 29.

  "Smartphones have become an extension of life and we are pleased to share the last device of the series Xperia with Canadians," said Lise Roy, President of North America, Sony Mobile Communications. «Smartphone users create, share and enjoy most of their content on the go from Sony latest innovations created in camera, and integration of entertainment, we undertook to do the Xperia Z5 best platform possible lifestyle available.»

  Bell dropped the price to $99 on a 2-year contract today. Not the sale of wells or people waiting for Z5 premium?

• WUSB600Nv2 encryption and no. WPA2 XP Pro SP2 problem?

  Description

  Hi I just got this today. I tried to install it to my brothers 2003/2003 or 2004 old 5200-701 Toshiba laptop that runs the factory install Windows XP Home edition image. Family XP wouldn't recognize installation on cd & says operating system not supported. So I downloaded the last configuration of version from the site to support cisco home & driver Windows XP worm 1.4.10.0. Don't know what version is on the cd. The new downloaded configuration worked, it installed & found the device.

  Encryption

  Because he had the old Win XP Home, so I did an upgrade to the Windows XP Professional SP2. I can connect to my router now & using NEW CONFIGURATION of cisco for WINXP best encryption I can use is not good enough! The best that I can use is WPA-TKIP. But I want to use WPA2-AES or WPA2-TKIP. But there must be WPA2! On the page of the driver version, it shows 1.4.1.0 09/03/2009 & under the signatory digital it shows the hardware compatibility of Windows of Microsoft Publisher. Please how can I then do use WPA2 please?

  Advice, suggestions, tips, answers are greatly appreciated many thanks.

  Windows XP SP2 does not support the WAP2 encryption, you will need to download WPA2 patch on the Microsoft website or to update your windows XP SP 2 for Windows XP SP3.

  Download WPA2 patch here.

  To download SP3 click here.

• How to encrypt a file? Help text says do a right click on the file name to go into properties, general tab select, advanced option and select Encrypt. When I do that, the Encrypt button is dimmed. I am running Windows Vista SP1 2007

  See description for my question

  The EFS Encrypt feature is available in editions of Vista Business , Ultimate and Enterprise . Remains grayed out in editions of Vista Home Basic and Edition Home Premium .

  You will need to use some software third 3rd to encrypt folders and files. Microsoft® Security MVP, 2004-2009