Big problem after the extend of editing in the browser? When the corrected mistakes?

Similar Questions

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Remove a problem after the app is available in the AppStore

  Hello, everyone,

  I want to know if it is possible to remove a problem after the approval of Apple. I have a multi-folio application and I don't want to remove the entire application, only one edition of it.

  Can someone help me?

  TKS a lot.

  Renata

  TKS a lot, Johannes!

• A big problem with the touch sensor A / V controls!

  My model is VGN-CS320J. Touch sensor A / V controls had been working properly until I installed Windows 7 Professional on my computer. These controls have now stopped working. I can drag is no longer my fingers to adjust the volume. Although I tried to reinstall "Synaptics pointing device", they always fail.
  Could someone help me?

  Hello 918353, the user

  Apologies, you have problems after the upgrade to windows7
  not all features will transfer to windows7 from vista as it is noted in the two methods.

  Upgrade (Recommended)
  [url: 2zl7xsgr] http://esupport.sony.com/US/perl/support-info.pl?info_id=508 [/ url: 2zl7xsgr]

  Clean install
  [url: 2zl7xsgr] http://esupport.sony.com/US/perl/support-info.pl?info_id=507 [/ url: 2zl7xsgr]

  However, for just the shortcut keys that you speak, those who would fall under the control of the laptop and utility found here
  [url: 2zl7xsgr] http://esupport.sony.com/US/perl/swu-list.pl?mdl=VGNCS320J&SelectOS=47 [/ url: 2zl7xsgr]

  If this does not help try reaching us via live chat!
  [url: 2zl7xsgr] http://www.omnitechsupport.com/sony/index.php?queue=ComputerPFS&OWChat=1&VARSET_MODELNUM=VGNCS320J [/ url: 2zl7xsgr]

  Best regards
  Kimberly

• I'm having problems after the restart with docking station, applications, etc.

  OS X: 10.11.3

  Mac Pro 2010 2 x 2, 66 GHz 6-Core

  Graphics NVIDIA Quadro 4000 card

  24 GB Ram

  50 GB of free memory

  4 additional hard disks

  Hello community,

  I have a strange problem, after the mac is restarted, even when I decide not to join his joined apps a former State of the saved request. I can't make changes to the dock, after restart it restores an old state. When I try to import or save something in any application you see normally last modified files, yet his watch an old state. When I try to delete files that I always put my password, it's new. Im confused, I'm a long-time os x user since 1999 has never had this kind of problems.

  Help, please.

  Lars

  Please, back up all data before proceeding.

  This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.

  Step 1

  If you have more than one user, and the one in question is not an administrator, then go to step 2.

  Triple-click anywhere in the next line to this page to select this option:

  sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.

  The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.

  Step 2 (optional)

  Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.

  Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.

  If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. In this window, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. You do not need to reset a password.

  Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.

  Select your username in the menu option allows you to select the account if not already selected.

  Under Reset Home Directory Permissions and ACLs, click the reset button.

  Select

  ▹ Restart 

  in the menu bar.

• Big problem on the latest version of the HP Server cloning

  Hi Hussein.
  
  EBS 11i
  Oracle 9.2.0.6
  
  I had a big problem: (huhuhu
  The old server (single node) currently has a problem of performance degradation.
  I have recommended buying HP hi-end servers and multi-user config installation.
  
  We've got HP Proliant BL460c Server Blade G7
  The seller said, a version of RedHat 5 is supported only
  
  I want to have a faster migration so that cloning is transparent, which is why I want to try to install RHEL 4
  Because the docs says Oracle 9i is not supported on RHEL 5? :(
  
  Can you recommend me the best and the best way to upgrade/migration/clone to the more recent servers?
  
  These are applications 11i support on RHEL5? If it is, why not Oracle 9i? Its so disappointing some are supported and
  Some are not, why not all or nothing. :(
  
  
  
  
  Thank you very much
  
  Mrs. Mina

  The first doc referenced above (Note: 881505.1) is the main doc for this upgrade. For other doctors, you would need to refer to some (or all) depends on your installation/configuration.

  Thank you
  Hussein

• problems affecting the correct size of fonts

  I have problems affecting the correct size of the font in mail and print, how do I return the policy to the original settings?

  Hello
  • What mail client do you use?
   
  It depends on what email client / browser you are using.
  Each browser / email client must have the print properties which should allow the user to adjust the print size.

  If you use IE, check the zoom settings. Do follow link below:

  http://www.Microsoft.com/enable/training/windowsvista/webzoom.aspx

• My OS: Windows XP SP3 edition of media professionals. I've known several and a wide variety of problems after the 2/2009 PC recovery

  ALL my problems have been reviewed by PC technology that was not successful to correct a number of problems.
  1 System Restore does not work
  2. impossible to reinstall sysvol32.exe Windows XP was preinstalled in my PC when I bought it.
  3. in the display control panel, all the themes, screen savers, music that fits the theme, i.e. Nature, are absent.
  4. firewall must be reactivated every 15 minutes.
  I have more that need to be addressed, but will start with these.

  Thank you very much for your help!

  margeann,
  Thanks for posting on the Microsoft answers Forum.  The first thing to do is to search for infections of virus or malware.  If you do not have an antivirus program you can download it here: http://www.microsoft.com/Security_essentials/

  Then I would try the following; the problems with the boot; run chkdsk; Run the sfc.

  Follow the steps in this article to resolve problems with a clean boot.

  http://support.Microsoft.com/kb/310353

  Boot advanced troubleshooting: http://support.microsoft.com/kb/316434

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Solution for Webcam sleep & back problems after the upgrade to Windows 7

  Just thought I'd share the solution I recently found a problem I've had since a Satellite Pro A200 GE 26 Q of the upgrade from Vista to Windows 7.

  I installed the software webcam for windows 7 on the toshiba site and built-in Chicony camera would work very well after a reboot, but if the computer is in sleep for a long enough period, the unit would stay asleep when the computer woke up and wouldn't work at all, unless the computer has fully restarted.

  The solution lies in a change in the registry to force the computer to update the webcam USB controller is attached, after the release of sleep. It was apparently the default for Vista when it was released, but was changed in Vista SP1 and Windows 7. Designed for Vista original material which did not have its drivers/registry updated entries could therefore be subject to a failure because of changes to the default settings through the updates of windows. Toshiba, it seems, do not think that this issue then of the extinction of the registry fix for Win7 upgrades for the satellite Pro A200. Therefore fix manually.

  The article where the solution is here: [http://support.microsoft.com/kb/928631]

  You do NOT have the file of the fix, you must only make the change to the registry described later.

  You need turn on the camera while you do the following to make sure that it appears in Device Manager correctly.

  Step 1: Determine the specific USB host controller

  
  # Click on * early *, enter devmgmt.msc #the * search * box, then click on * devmgmt.msc* in the * list of programs.
  # The * view * menu, click on * devices of * connection *.
  # Expand the processor node. For example, expand * ACPI * Multiprocessor PC *. (In my case, * ACPI x 86 based PC) *.
  # Extend * system compatible ACPI Microsoft *.
  # Extend * PCI Bus *. Several USB host controllers will be listed.
  # Expand each USB host controller node, and then expand successive subnodes until you find the name of the device that is failing. For example, the device entry might look like the following: ACPI Multiprocessor PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB Universal Host Controller - drive root Hub\fingerprint 2830\USB * (Note: for me, I found the webcam to ACPI x 86 PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB2 Enhanced Host Controller - 283A\USB Root Hub + USB Composite Device\Chicony USB 2.0 Camera-based) *.
  # When you have located the device, right click on the associated and then USB host controller click on * properties *. In the example that is listed in step 6 you would right-click * Intel(r) ICH8 Family USB Universal Host Controller-* 2830, then click on * properties *. (* Again, for me it was different - ICH8 Family USB2 Enhanced Host Controller - 283 a *).
  # Click on the * details * tab.
  # Select * pilot key * in the list. The driver key will look like the following. Note the last four digits of this driver key. {36fc9e60-c465-11cf-8056-444553540000} \0002 * (on my system it's: (36fc9e60-c465-11cf-8056-444553540000) \0005*).
  
  
  

  Step 2: Add the ForceHCResetOnResume registry value for the USB host controller

  
  # Click on * early *, type regedit #in the * search * box, then click on * regedit.exe* in the * list of programs.
  # Find and then click the registry subkeys that are similar to the following: * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class{36FC9E60-C465-11CF-8056-444553540000}\Four-digit_number.* in this step, the numero_a_quatre_chiffres is a placeholder for the USB devices in the system.
  # You must search the registry subkey by using the value that you noted in step 9 above. For example, if the key of the pilot to step 9 is * {36fc9e60-c465-11cf-8056-444553540000} \0002*, then you need to get * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class {36FC9E60-C465-11CF-8056-444553540000} \0002. (For me, as mentioned above, this was \0005 (36fc9e60-c465-11cf-8056-444553540000)). *
  # On the * Edit * menu, point on * New * and then click on * DWORD value *.
  # Type# * ForceHCResetOnResume * to the name of the DWORD and then press ENTER.
  # Right click * ForceHCResetOnResume * and then click on * edit *.
  # In the * boite box the value data, type# 1 and then click on * OK *.
  # Exit the registry editor.
  # Restart the computer.

  This fixed the problem for a long time for me. I'm writing this in case it helps someone else who has the same problem. If anyone from Toshiba never reads this, you might consider adding the registry fixes for upgrades of windows 7 on the download page for this & all other models affected.

  Big Hey what s announced and detailed, thank you! :)
  I m wondering how you discovered it.

  But I want to add something: before you make or change something in the Windows registry, make a backup of it. In the worst cases, restore you the old Windows registry. Just to be sure ;)

• Big problem in the finder then the copy of the file trought different drivers

  For my work, I download and archive about 100 GB of photos every time.

  After upgrading to Mac OS sierra I meet big difficult.

  1 copy a lot of files require a lot of time more instead of last osx (about 4-5 times more)

  2 - from multiple instances of copy beginning with a lot of delay (approximately 5-6 minutes after the control drag & drop or copy/paste)

  3 - once the completed instance disappear and always with "0 file to the end" for a long time (about half the time of the copy) and in any case until all istances have been terminated

  4 - after all: not all the files are copied (the last time about 300 files are lost in a total of 4000)

  before all the reactions:

  -all my system works perfectly before the sierra of macos

  -all my drivers are fully working (tested in ather Mac without sierra)

  -a speedtest with the blackmagik tool say that the system can still run at full speed

  -If a script third spear the copy no problem

  that: in my experience, the question is on sierra finder.

  clearly, I can't work with this type of system, that:

  When apple will fix problem of che?

  How can I return to osx than el capitan without lost my documents and applications?

  Thank you

  > How can I return to osx el capitan without lost my documents and applications?

  This link is for El Capitan, but it also applies to the Sierra:

  OS X El Capitan: revert to a previous version of OS X

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• Big problems after upgrade to ESXi U2 U3

  So I'm pretty new to ESXi, a few months, this server running.

  change I think the problem was the following. When I created VM1 and opened on the old old V of the DIR drive it was only a single file and it opens fine. When I created VM2 and open the old disk from the old DIR it couldn't find the other files because it resembled the new DOH DIR.! and then after that I moved all the files on disc to the new dir then it did not work and gave me the parent changed message. / edit

  Thus, all started when I tried to use VMware Infrastructure Update on my workstation to update my ESXi server. After the update, I rebooted and the server never came back to the top. I thought: my installation is basic I'll just re - create a new USB key with the current U3 and start with that and re-setup ESXi.

  So I did and was able to create a new virtual machine for server 1 and use my old virtual drive of Server1 and booted up and works perfectly.

  Then I created a new virtual machine to Server 2 and used my old virtual server disk 2 and when it started it was not the right server... but it was the virtual hard disk only I could take in this DIR. After I looked again using the browser of data store, I noticed the snapshot files. If I had started in an old cliché, or I guess as the snapshot of base. But all my data are in the latest instant 2 capture files. I can't mount it as a virtual hard drive.

  I got the error "... reason: the virtual disk parent has changed since the child was created."

  Where I am now is so I have started more than once as the basis of snapshots without the current clichés and they do not seem to hang on after that a basis has been started and changed.

  Is there anyway for me to get data from this mess?

  Any help and input is greatly apprciated!

  Hello

  You can take a look at my post in this thread.

  http://communities.VMware.com/message/1167519#1167519

  Thank you

  Samir

• Major Outlook and timing of the problems after the upgrade of the El Capitan

  On the advice of the Apple support (phone call) I recently upgraded from Yosemite to El Capitan 10.11.6.

  I have many problems. The two largest are (1) stands (2016) Outlook and frequently "must be closed; (2) calendars quickly goes to "not responding" after the launch and shows multiple entries for a single event. Example: I have a class to repeat each week (when I was in Yosemite). Before the upgrade, he showed the event once a week. After the upgrade, it it shows 13452 times the same day. I followed the advice on these topics, but nothing has worked. Similarly the calendars on my iPhone5 freezes as well.

  Hello Steve,.

  Thank you for using communities Support from Apple. I have a problem with your MacBook Air use after update is not what you expect. Based on what you said, it seems you can experience some software related issues, and here's how I recommend refine you and resolve these issues:

  1. first of all, try to run a quick with the disk utility tool test, as this can correct simple problems that you encounter. Then restart normally and retest your problems.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Test mode safe questions, then restart normally and test again.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  3. you can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  See you soon!

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• problems after the automatic updates

  I have Pavilion g7-2235dx with Windows 8.1 operating system. Almost all automatic up-to-date mess to the top of my ability to get on the internet. The only way I can connect is to uninstall all updates. The icons on my desktop has also stopped working. When I click it, it will immediately on the desktop. Cannot pin them to the taskbar either. Those on the taskbar does not open by clicking on them either. Have to click straight and say to open. Also problem get my Norton antivirus to open. Says it works but can not open it.

  Hello
  
  It might be, the upgrade to Windows 8.1. I've seen people with complications get the upgrade to go "smoothly".
  
  You can try, do a system update that would take you back to Windows 8. See if you have the same problems after updates.
  
  If you choose to update again, make sure that everything is already successfully updated.