Black and yellow Officejet 6000

Similar Questions

• OfficeJet pro 8500 all-in-one: black and yellow ink does not print. brand new

  Can I return the cartridges that do not work? Or is there another solution?

  The document here can help solve the black and yellow print not on you Officejet 8500.  Black and yellow print does not correctly, I guess the Black/Yellow Printhead, which is a part of repalceable, but I suggest you to go through all the steps in this document in order.

• print only in black and yellow on the officejet pro 8500 Inc. has

  Hello

  I installed recentlly hed all 4 cartiges for my printer.

  all cartiges 940XL ginuine.

  It is not the first time installation and never problams hed.

  now I tried to cleen the printhead in the menu priter and allaigen printheads.

  allaigen faild and still only print in black and yellow...

  

  Help me please...  (Sorry for my bad English).

  Your printer has 4 color cartridges and 2 heads print, black share one and the other for the other two colors.
  If cleaning print head does not help, probably time to replace the print head: http://support.hp.com/us-en/document/c01623635

• I need to restore the icon of my home 'black and yellow '.

  I had to reload Firefox and when I did, my black and yellow house icon does not appear. Help, please.

  Glenn

  You can find the button at the right end of the Navigation bar.

  Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

  You can drag the home from its current position to the right button to the previous position to the left of the address bar.

  • http://KB.mozillazine.org/Toolbar_customization

  If you do not have this button on the right end of the Navigation bar then see:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• How can I fix the color settings when the only options are a range of blue, black and yellow

  I have recently re installed Windows XP on my Dell Dimension 3000 and the color is now off on my monitor.  The color management setting offers a selection of 16-bit and 32-bit with the a limited range of color blue, black and yellow.  I also installed Driver Detective and all the drivers appear to be up-to-date.

  Some monitors have buttons on them to fine tune the settings and get around windows.

  Check your manual homesite monitors or it's.

• Don't print black ink (HP Officejet 6000 E609a Series)

  HP Officejet 6000 E609a Series - do not black ink print ---
  No warning light indicates low ink levels, so I called "solutions Center". The chart shows all cartridges, color and black to be virtually complete. I then replace the black cartridge with a new cartridge 920XL, thinking that the original could be defective. Same as before results! I (1) printed to a printer status report (2) print a print quality diagnostics page, (3) aligned the print heads and (4) cleaned the print heads, all to nothing does not. I even carefully cleaned the container for the black cartridge with a Q-Tip to collect a small amount of excess ink. Color cartridges are printing very well but the black cartridges will not print. (Either by the way, it seemed to happen suddenly, not gradually). I would be sincerely acknowledging all recommendations to solve this problem.
  Thank you... RP

  @ wespikard - here is a link to a document that addresses print quality problems of the model of printer that is mentioned in the first post of this thread. It will give you instructions to solutions that will attempt to correct the output quality of your printer. I hope this helps.

• W7 professional after remote access to my desktop computer 'loses' his printer. Windows / devices and printers / "Officejet 6000.

  W7 Professional (both sides) after remoting in through our company intranet, my desktop computer 'loses' his printer.  If I go to "windows key" / devices and printers / she sees a "Officejet 6000', which is connected via usb, windows, but there as"not specified ".

  Hello

  Thank you for visiting the Microsoft answers community site. The question you posted would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps.

• HP Officejet Pro 8600 + not to recognize the new real black and yellow ink cartridge

  HP Officejet Pro 8600 +, this machine is 1 year old, just out of warranty and is not recognizing the new yellow and black cartridges HP ink. Tried the hard reset and cleaning the parts set out in other posts in this forum without success.

  Disappointing that the colored inks run low if fast even when you do BLACK only printing and now that the mahine a work stoppage at its destination.

  Any help/ideas?

  Hello

  As you have tried with the new cartridges, I think it might be a problem with the printer or the print head.

  Please call the HP Technical Support for assistance.

  If you are in US , toll free # is 1-800-474-6836.

  If you are not in US , then log on to www.hp.com , bottom left it is an icon of the world map, click it, then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on "'Accept as Solution" if it has solved your problem, if others can find. "
  I work for HP

• OfficeJet Pro 8500 has more: impression of 8500 has only black and yellow

  Pretty simple problem.  The cyan and magenta colors do not print.  The cartridges are all fairly new, PLR and lines of supply to the printhead not are not tangled, etc..   I wonder if I need to replace the print head.  The machine is almost 4 years old.

  Thank you

  TP

  Hello @thomasapayne,

  I understand that when you are printing on your HP Officejet Pro 8500 has more e-All-in-One Printer Color Cyan and Magenta will not print. I would like to help you today with this problem of print quality. Thanks for the troubleshooting steps that you received before reaching out for support, including. Currently, there are a few quality printing additional troubleshooting steps that can be done to resolve this Cyan and Magenta print quality problem. However, if these measures fail to solve this problem of quality then a replacement Cyan and Magenta Printhead will likely be needed. That being said, can I please have you follow the steps below.

  To begin troubleshooting can I please have you click here. Once the support document opens, please follow the steps under four Solution. This includes step 1, step 3, step 4 and step 5 under four Solution. You may need to run the three print head cleans to unclog the printhead system. Attention do not exceed three clean because the ink is used during the process of cleaning print head. After troubleshooting is completed, please print another diagnostic quality report in order to confirm if the quality issue has been resolved.

  If the problem persists, a replacement Magenta and Cyan Printhead would be necessary.

  The print head should be is original printhead Cyan and Magenta HP 940. The part number is C4901A.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Officejet 7680 print does not black and yellow flows

  
  

  Hello and thank you very much for your reply.

  I rang MOM House and talk through a few things, and we must operate. (For the use of anyone else in the same situation as something to try.) is the process we went through.  Despite the power line calibrations and repeated, cleans the printhead not having not effect previously, I think he need extra push that we gave today.

  (1) reset the printer:

  http://support.HP.com/us-en/document/c00841912

  (2) run the diagnostic tool

  http://support.HP.com/us-en/document/c02037530

  (3) (the printer menu) calibration of line break

  (4) take the print heads off and put in that their return. Began to notice a slight improvement.

  (5) turning it out for a few minutes and then on again, cleaning the print heads and repeating this process 4 times (shooting and turn inbetween each own) he quality of better and better with each cleaning until the end was very good. We printed some university work since and it is fine.

• Cannot print black or yellow on my hp 5520

  I have problems printing black and yellow of my Photosmart HP 5520. I ran head clean process repeatedly wait between cleanings and it still does not print. Black print cartridge is brand new and yellow is half full. I've been on the link which when black and other color does not print and still no luck. Any suggestions on what to do next would be greatly appreciated.

  Hi Octaboze,

  I sent a private message on the Forum, please go to your userpage to the right of your username, you will see your Inbox.

  Thank you

• Can I print in black and white with an empty cartridge on a printer HP Officejet Pro 8100?

  Only the cyan cartridge is empty, all the other 3 cartridges are fine. I ordered the cartridge cyan online but I need to print important documents today. The power button blinks when I try to print.

  I do not understand, black and white must not use a color cartridge to print.

  Is there something so I can print before receiving the cyan cartridge?

  The printer Officejet Pro 8100 has the same print mechanism like its counterpart of all-in-One Officejet Pro 8600.  This printer has a print head mechanism that contains 4 individual cartridges: CMYK (cyan, magenta, yellow, black).

  It will replace the cartridge if the unit provides a message from one of the colors being empty, until the unit will resume printing.  This is a retention mechanism to avoid the product from damage.  I hope this helps.

• HP Officejet 6000 Print gray instead of black

  Hello

  My HP Officejet 6000 works well for about a year until today, where he began to print light gray instead of black.

  My officejet is attached via USB directly to my PC, I'm under Ubuntu 12.04 with gnome shell. Used to work out of the area to print. I just install HPLIP Toolbox to see if I can fix anything, but that was no help. I exchanged the inktank black for a new, but that did not help either one. The gray looks perfect gray and not a faded defective, black dryness. I tried to change the output of color mode in the settings of the printer to the only black than gray, and the printer does not print the necessary ink at all. Is this a software problem? Or printer hardware problem? I tried printing from my laptop and had the same problem.

  Any help would be appreciated.

  Problem solved. I got my printer to my friend who has a Windows PC and a test print looked fine. I thought it must be a Linux question then. I have connected my printer to my PC Ubuntu again, and for the hell of it, I tried to print a test page and go figure, it worked. Maybe unplug the printer helped solve the problem? BTW, when I meet my problem, the printer was not actually printing gray instead of black by mixing the inktanks color. I discovered that she did not use the black tank at all. I'm glad that everything works again without having to really fix anything. So if anyone else has this problem, try disconnecting the printer, and then try again. That could be the solution. Turn off the PC one on or the printer doesn't help.

• Windows 8 - officejet 6000 - just stopped printing black-

  Windows 8 - officejet 6000 - just stopped printing black-

  put a new black cartridge in and now it will not print black - going to test the page and color printing - can hardly see black text on the test page - gray value - has always been - no other changes have had recourse to the same printer for a little over a year.  Only clean the print heads still no black printing.

  Hi rea123,

  I understand that you have an Officejet 6000, which is currently not print black ink. I'm sorry to hear what is happening, but I will do my best to help you.

  I suggest that you first look through this document for Troubleshooting print quality problems because it may be a few steps that you have not yet tried.  This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer has also a few steps to know how to clean the print head manually.

  If all else fails, take a look at the Bob_Headrick station for soaking your printhead.

  Hope this helps, have a nice day!

• HP OfficeJet Pro K5400 print is Cyan and yellow all of a sudden. Help, please...

  OfficeJet Pro K5400 Cyan and yellow just stopped working at the same time (very strange).  I have read almost every post and tried almost everything including diagnostic tests that show that all is well (via the keys on the printer), test and all the other available tests in the manual of HP cleaning several times.  The diagnostic test shows no problem and brand new and full cartridges to max.  However the diagnostic characters shows that black and Magenta, but no Cyan, yellow or any other color.  I took out the printheads, cleaned connectors, soak the heads and everything else you can imagine and not luck. I need to have finished the power and "hard reset" on a dozen times.  I can't imagine that two printhead (cyan on a yellow on the other) has just decided to die at the same time.  I can't be driver/software related because I did the tests directly from the printer.  The only thing I can think is maybe cyan and yellow parched when I took out the cartridges at staples with me to reference.  All cartridges have been taken out of the printer for 2 weeks or more.  Any thoughts?

  Ouch - two weeks with the cartridges removed probably allowed 'plumbing' between the cartridges and printer to dry and clog.  If the print head and cartridges were never removed and it is also possible for the tubes to drain and air to block channels of ink.

  You tried to clean the printhead a couple of times, I suggest three levels of cleaning in the sequence of head running.  Each level of cleaning up to three will be a more energetic cleaning.  You have probably already found the Troubleshooting page here.

  Scroll down this page and click on the + to expand the Windows section, then scroll down to the section on executing a cleaning of the Control Panel, click on the +.  It is said: