black marks when printing

Similar Questions

• Problem: Shadow of light color on black background when printing

  Using InDesign CS3, PC.

  I have a book cover design that looks perfect on screen. There is a section with a black background and the letters of color above it. Also on top of this black background is a picture of a dinosaur (made in illustrator CS3). The image was placed in the InDesign file and has no color to the background. But when printed (Xerox Phaser), there is a colored shadow where the image superimposed on the black background section.

  There are also colored boxes on the other black background sections where shadows (35%) occur on black background.

  Could someone tell me what I am doing wrong? I've never dealt with 100% black in my drawings before and I have to do something wrong.

  Again, on the screen, you don't see none of these colored areas on the black top. It's only when I print as they appear.

  Thank you

  Cathy

  InDesignSecrets"Blog Archive" eliminating the YDB (yucky discolored box) Syndrome

• Photosmart b110a leaves streaks and black ink when printing card

  The printer is around the age of 18 months and until recently printed perfectly to any type of paper we used, now, although print on normal paper, whenever we try to send the same file to print card 200gsm, large black ink as a streaks appear at the beginning of the printed area.  Change the type of paper for 'Matt card' makes no difference.  The printer is used by many laptops all running on a OS (Vista, XP & now Win 7) all have the same result.  I changed the black cartridge several times, but it makes no difference.  Everyone knows this or can anyone suggest anything else I can try.  Thank you very much

  Hi DebsB99,

  It sounds like the media are thinking of this printer. Try using a smaller paper gsm and let me know if you still have the problem?

• HP photosmart D110a: printer says paper but leaves a black mark on paper in the tray

  Laptop got hit out of the office by CAT when you are connected to the printer when printing. Now the printer says there is no paper in the tray and it leaves a black on the paper mark as the printer attempts to shoot the top sheet of paper in, but he can't.

  I fixed that on my own by giving the top sheet a little bit as he began to print. Hope this helps someone.

• Office jet pro 8600 how default to black ink only when printing from my ipad

  Is it possible to set an option to print the black ink only when printing from my Ipad 2?
  When I use the print icon the only option that shows is double page. I would like to be able to print in black only.
  I can set this option when you print from my pc...

  Hello

  AirPrint does not support black ink only printing, however the HP ePrint app allows it.

  Note that the option is available only for documents (for example Office, PDF, Web pages and emails files), but not for the Photo files.

  You can find the steps to obtain and use the application in the document below:

  http://support.HP.com/us-en/document/c01616126

• Printe all-in-one HP Envy 5660: obtaining a black page when I try to copy a document.

  Tried to copy a document. Obtaining a black page. Print preview displays also a black page. Full black ink cartridge. Tried to unplug the unit. No change. Any suggestions?  Thank you.

  Hey @JaneDeere ,

  The semi Full Reset is a complete programming on your printer reset. It resets everything on your printer, not only the wireless. Unfortunately, this reset is our last resort. Because the issue is still produced the last step would be the printer to service.

  I recommend at this point, contacting the Technical Support queue by phone to explore additional options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  When you talk with the phone support agent, please notify them of all the steps that we have done and the results of these measures.

  It has been a pleasure to work with you. I wish you good luck going forward with this! :)

• Does not recognize a narrow black border a white border when printing without margins

  Photosmart D7460, Vista 64 bit,

  If I put a white border around a picture with a narrow black border outside a photograph and select borderless printing knows no black and white borders and prints the image within the borders to the edge of the page.

  If I want white edges around pictures and a full letter size print, I get a border that is wider at the bottom than at the top of the page.

  Can I configure it to print even a white border around the photo of the letter size?

  and

  Can I get the printer to recognize a border color around an image when printing without margins?

  I have only access to the X 2 version, here's a predetermined print schema.

  Note the Center on the page option.

  You can use the balance: option to increase or decrease the white border.

  

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• Photosmart 3310 prints random colors even when printing black

  Photosmart 3310 prints random colors in color, print and even when printing black.  This happens with photos, copies and printing documents.  I cleaned the print heads, ran the scan/repair software that says that the printer works fine. tried color calibration and these charts don't print correctly to match the place.  The first printed grid gray background with the nuances of roses square.  Printed low rack square pink dark only on white, there was no way to calibrate.  I put in all new inks (hp only of course), and the printer recognized them.  I have unplugged, rebooted, uninstalled, installed again.  Help, please!  Thank you.

  I'm sorry you are still having the problem with the printer. You can always review the HP upgrade program. This is where you can buy a printer refurbished at a reduced price, which will be accompanied by a full factory warranty. These printers will also be eligible for care pack extensions too.  The number for USA and Canada customers to call is 1-800-474-6836. I am adviser to this program so that know all the options that are available to them when we're under warranty.

• I can't find a place to start black or color when printing when printing.

  Win 7 64 bit, Photosmart 6510 B211A...

  I find no place to put in black or color works when printing.

  I can force it to print in black by setting levels of gray to black and print color to grayscale setting turned off.

  Any help much appreciated.

  That's what I've done to print must go in advance set to grayscale to BLACK of INK to print black gray set OFF to print in color. Would be nice if HP put the buttons on the print preference to select room black or color screen.

  This is what HP support told me to do.

• Color Laserjet M476dw MFP: use of colour toner M476dw when printing in black only pages?

  I bought a M476dw about a month ago.  After printing the demo page of color a few times and one or two color prints and then until I changed the default settings, there are a few pages with "accent color. Other that that, I've only been printing black pages since then.

  Supplies report says I have 70% left on my estimated (printed pages: 310 750 remaining) black print cartridge and the remaining 90% on all color cartridges three ((printed pages estimated 33 remaining > 1000)

  I realize, these are just estimates, but I'm surprised that 33 pages of printing almost all who were just the accent color resulted in 10% of the consumed color cartridges.

  I have printer connected directly to the wall and leave it on all the time, so no excess cleaning cycles are generated, and my default print mode is: black & white / grayscale printing.

  I know that provided cartridges are cartridges 'starter' but are there still other factors under MY control on colour toner consumption?

  Thank you!

  Jim

  Hi Jim, The M476 turn all durning cartridges a print job mono-noir, even if the color toner is not applied to the page.  It's features of the motor to the drum cartridge luberciate and prevent damage.  The rotation is counted even if there is no toner applied to the page.  As you mentioned the status of supplies is an estimate and is controlled by the firmware of the engine, and levels of toner alerts can be set to low or very low, with other settings under each heading.  Basically, the State of cartridges supplies is an estimate, based on the use and rotations or print quality may continue until the age is observed or impression continued after the alert status.  A research on HP support/troubleshooting on this topic could provide additional resources.

  Thank you

  Norm

• OfficeJet 6000 E609n: One color (black) does not print

  Background the color black does not print.
  Background page printed from the printer status indicates that there is no black ink. This impression has said that there is sufficient (at least 20%) supply of three coloured inks. Per the comment above, no black printing does appear on the page printed of the status of the printer, even if the black cartridge has been rather recently installed (2015-12-24).
  Background none of the four "low ink" lights on the printer are turned on.
  Background the State indicated by the HP Solution Center utility displays a green check mark, that is to say, that everything is OK.
  Background the "estimated ink levels" in the utility HP Solution Center indicate that the black ink cartridge is about 60% full.
  Background I've done the first of these two cleaning procedures to clean the print head. It produces no change. (In fact twice.)
  Background I removed the power cord to the printer and unplugged the power cord from the source and then wait 10 seconds. Then I reconnected things together. Nothing has changed.
  Background I cleaned the vent for the black cartridge.
  Background I replaced the black cartridge. The level indicated on the "Estimated ink levels" in the HP Solution Center utility now indicate that the black ink cartridge is 100% full.  No change.

  Background now, I think that the problem may be the print head.  I am discouraged.

  Any suggestions?

  Hi @Upper_Left,

  It seems as if the HP product registration service is temporarily unavailable.

  Normally you get invited to register immediately after installation is complete.

  It's a Web page that can help you know if the printer is listed, or as aid re-register once the number of available service - Registration Question Index.

  The term of defective kernel is used which means that the defective part you are replacing is the same part that you send back.

  When you select the option to change the replacement part is usually repaired or refurbished, is why there is such a difference in price between the parties. It seems that if the defective part is not returned within the specified time. 'faulty base tax' is loaded.

  I can't say for sure 100% that the problem will be resolved to the replacement printhead. If the printer was in warranty, it would be the normal order of operations.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
   
  Thank you!

• Pages and Numbers crash when print drivers Toshiba

  In my office, I have a black and White Copier 857 of Toshiba e-studio and a Toshiba 4555C color copier, who never gave me problems printing on the network from a PC or Mac before El Capitan. Since he joined some of the Mac (some MacBooks, some iMacs, liberation of the years from 2011 to 2015) to El Capitan (all versions up to and including 10.11.4), I met a strange behavior when you try to change printers in Pages or in number on all of these Macs (no problems with the PC, regardless of the version of Windows). The exact location is:

  -Open the Pages or numbers and starts with an existing document or a new document

  -Bring up the print dialog box

  -Change the printer active 857 c 4555 or vice versa

  -Pages/numbers instantly crashes with the following error report (I don't publish the complete stack trace unless someone finds it useful):

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_INSTRUCTION (SIGILL)

  Exception codes: 0000000000000001 0 x, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Request for clarification:

  Crashing on the exception:-[NSMenuItem supportedPPDOptionKeys]: unrecognized selector sent to instance 0x7ffa04cbe8d0

  Note that this happens only (so far in my tests) in Pages, Numbers and curiously, Google Chrome (but only if you use the dialog box print system). It does not occur in Keynote, Safari, TextEdit, or all the productivity applications from Microsoft, nor when printing test pages from the printers and scanners preferences window. It also does not occur when moving from one of the problems Toshibas completely different printers (HPs, brothers, Epsons), or vice versa - only between the Toshibas. I tried:

  -Delete the printer preferences

  -Configuration of the drivers of Toshiba to "pretend", that printers are different models

  -With the help of Hello, PPI or LPR to connect

  -Remove all equations in partial derivatives of Toshiba and SDPP/library and re - install the drivers from scratch

  -New and old drivers Toshiba

  -Ensure, Pages and Numbers are the latest versions: 5.6.1 (2562) and 3.6.1 (2566) respectively

  -Various updates of El Capitan

  -New installation of El Capitan

  No luck. Same behavior, no matter what machine or El Capitan version I try on. Unfortunately, I don't have other models Toshiba to test. I would be recognizing all thought - I understand that the answer could end up being 'complain to Toshiba of their pilots', but I thought it was worth a try here first. Thank you!

  I would say that you are looking for in a bug report. A all Pages, a copy of the numbers.

  In each, open the app, go to the menu of the application (Pages or numbers) and choose to produce (application name) return. Use the bug report category and give a detailed description of how to reproduce the results you've met. Repeat for other affected applications.

  Kind regards

  Barry

• black and white printing on HP Officejet 6700

  I have an IMAC 10.8.1 operating system.  I can't get my 6700 HP to print only black and white.  Even when I choose black and white printing, it will not be printed like that.  I can't implement any new printing preferences.  Now, I'm unable to print anything and yellow ink.  Went and bought a new black ink and printer recognizes that black ink is full.

  I don't know just something I am doing wrong.  Can anyone help?

  
  The application that you are trying to print from, launch the print dialog box (file > print).

• What to do when printer without wire connection is off

  What to do when printer wireless connection is off?

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">