monitor blacks out after the windows xp screen__

Similar Questions

• Black screen after the windows login

  Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

  -Task Manager is able to open when the screen is black (shows explorer.exe running)

  -J' have the drivers on the HP support site

  -laptop is HP Pavilion DV7 3024ca

  You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

• Windows startup at black screen after the Windows logo

  Original title: Evga Nvidia GeForce GT 520 1GB black screen graphics card

  I have a Hp Pavilion 6400 in the series which ran on Windows Vista (32 bit). I recently installed Windows 7 Ultimate (32 bit) and now the screen goes black once the windows logo closed its animation. I uninstalled the driver, re the driver installed and configured my system to the lowest resolution.

  Already found in the forums.
  -TV is too old to be compatible.
  EVGA - technician told me that the food was not powerful enough.
  -Forum Windows says: error in Explorer.exe.
  -Also found response that runs the computer through MSconfig would solve the problem.
  So far, none of these solutions have worked. Answers appreciated.

  Problem solved.

  It turns out, the driver for the video card would never completely install due to its mode of operation.
  Solution.
  1 restart Windows "low resolution".
  2. access to the form of previously downloaded files driver install the EVGA site while in safe mode.
  3. once divers have installed I changed the resolution in a HD rather than a framework
  "(native)" parameter in the resolution section.
  4. application of the Windows updates.
  5A started playing Star Trek Online.
  Thanks for your reply and have a great week.

• Black screen after the Windows Logo

  I have a black screen after windows with no crusor logo and no keyboard work, I just tried all mentioned in the forum, but all of them are just useless happens just after I shutdown or standby or standby extended

  I use windows 7 ultimate 32 bit with the latest drivers & updates

  Hello

  What is the code of Bug_Check of BSOD?

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  Check the code from Bug_Check to Faultwire as shown in the above troubleshooting link.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Pavilion dm4 1041tx: black screen after the windows logo

  My laptop screen has frozen while watching a video then after restarting it displays black screen but I can connect to windows using the laptop and fingerprint reader can be closed by windows by pressing and then alt + f4, then alt + f4, then enter. Works in safe mode. Disable the ati graphics card did not work. Same execution of recovery did not work.
  Hard drive test results:
  Smart check: past
  DST short: PAST
  Long DST: PAST
  Help, please...

  Hi @vikash4309 ,

  At this point I agree with the tech that look at the computer I think it's a problem with the hard drive or even the system board. They may give falsely on the test results. I would recommend that you take it back to this HP's Service Center.

  If you do not replace the hard drive recovery CDs should work as long as replace you it with another hard drive and not an SSD because they are different and the recovery CD will know how to properly partition the drive.

• black screen after the windows logo when I install my video card

  Leadtek WinFast GT 220 1024Mo DDR2 graphics card

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  You say you have "defective" material and you want a software solution?

  Any material support - including the drivers and other software that may be necessary to enable a hardware component to operate fully in a given operating system - is the manufacturer of the equipment.  So if you have a problem with your nVidia GT220 video card - your first stop should be nVidia.

  • Assuming you have Windows 7 64 bit, the drivers you want to include.
  • Assuming you have Windows 7 32 bit, the drivers you want to include.

  -In addition, you are in the hands of nVidia.

• Black screen after the Windows Logo screen

  All of a sudden just put off the computer. I keep trying to start it up, but just then it gets to a black screen and does nothing. I managed to get in Mode safe like twice, but when I try to access safe mode again, it gets stuck loading. What can I do to save my laptop OR at least save my data?

  Hello

  It will be interesting to know what model of laptop you have. I had the same problem and I connected the HARD drive to the second workbook as external HARD drive. on this way, I was able to copy all the important data.

• G62 screen remains black after the windows logo

  Hello

  I have a HP G62-b05SD. I noticed that many people have the problem of simmular.

  I know what makes, but don't know how to fix it.

  So here it is.

  Sometimes when I boot / reboot system screen turns black after the windows logo, but if I wait a while, I do not hear the star tune up windows, but the screen remains black.

  I noticed that this happens when I shut down or restart the system with a usb port (be it a mouse or a stick is not serious)

  If I all out en usb port restart or turn on the machine for the first time this day here, everything starts well.

  So there must be some driver problems I think with usb ports and the screen or something.

  Help, please!

  HP G62-b05SD

  Windows 7 64-bit

  Intel i3

  ATI mobility radeon graphics card

  Ow and when I get the black screen, the hard reset does not always work.

  I also did a startup repair and it showed:

  "If you have recently attached a device to this computer as a camera or portable music player, remove it and restart your computer. If you continue to see this message bla... bla... bla... "

  I hope you can help.

  Hi Frosty1984,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP G62 - b05SD Notebook and having problems with the starter. Here is a link to BIOS update.

  What is the USB device that is at the origin of the questions?

  Thank you.

• Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

  Windows Vista 64-bit... Black laptop after the latest updates... windows screens will not boot into SafeMode again black screens.

  Hello

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

  http://support.Microsoft.com/kb/934540

  Method 2:
  You can refer to the link below and check the drive for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  If the methods mentioned above do not solve the problem, then it would be best to contact the manufacturer of the computer.

  For more information, see the following Microsoft article and check if that helps.

  
  Why my screen is black when I start Windows 7? (Applies to Windows vista)

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

  recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

  Kind regards

  DP - K

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Black screen after the notation in Windows 8

  Title screen: black original after logon (windows 8)

  I have lock my Dell M4400 (windows + L) and close the cover, after leaving for about 5 minutes. And to come back and connect on my laptop that my office shows about 1 min, then my screen turns black.

  It happens every time, I lengthen windows, my display drivers but nothing helped.
  This started happening about 3 days ago, so I went back in time for a week, but it's always the same.
  Someone has an idea to solve this problem?
  Edit: now it does to wake from its slumber, the clean is when I cut the power or the hardshutdown. The screen remains black even after a couple of try tot restart the laptop. Im getting Desperate now.

  I tried to make the window & window + R, C. They simply do not work. The only thing I can do a window + L & Ctrl + Alt + Delete. I opened my computer by using the Windows Task Manager. With my computer, I opened Google Chrome and I'm typing this now with a black screen Google Chrome, Windows Explorer and Windows Task Manager.

  Task Manager, go to file > new task.

  RSTRUI put in and this should start the system restore.

  Choose a restore point a few days before this problem if it is available and you should be good to go.

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• In the library panel, pictures of miniatures become black one after the other

  Hello

  Last month, in the library panel, pictures of miniatures become black one after the other, and then they all black!

  I don't know how to recover the thumbnails.

  And in the develop module, the photo is very dark, until I click on your car.

  Thanks for helping me Olivier.

  Version of Lightroom: 6.2.1 [1046594]

  License: Permanent

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  The system architecture: x 64

  Number of logical CPUs: 4

  Processor speed: 2.9 Ghz

  Built-in memory: 6143,1 MB

  Memory real available pour Lightroom: 6143,1 MB

  Real memory used by Lightroom: 900,6 MB (14.6%)

  Virtual memory used by Lightroom: 1032,1 MB

  Size of the memory cache: 399.2 MB

  Maximum number of links used by Camera Raw: 4

  SIMD optimization of Camera Raw: SSE2

  The system DPI setting: 96 DPI

  Composition on the Desktop enabled: Yes

  Views: 1) 1920 x 1080, 2) 1280 x 1024

  Input types: multipoint touch: no, touch integrated: no, built-in pen: no, touch external: no, External plume: no, keyboard: no

  Parents to the graphic processor information:

  AMD Radeon HD 5800 series

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13399 context 15.201.1151.0 the base profile

  Renderer: AMD Radeon HD 5800 series

  LanguageVersion: 4.40

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Access to the library path: D:\Photos\_LightRoom\Lightroom\Lightroom Catalog.lrcat

  Settings file: C:\Users\Olivier\AppData\Roaming\Adobe\Lightroom

  Installed modules:

  (1) Facebook

  (2) Flickr

  (3) external module connected mode Canon shooting

  (4) external module connected mode Leica shooting

  (5) external module of shooting in connected mode Nikon

  Markers Config.lua: no

  Adapter n ° 1: supplier: 1002

  Device: 689e

  Subsystem: e177174b

  Revision: 0

  Video memory: 1012

  Adapter n ° 2: provider: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (High Definition Audio device)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: LR5x102

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  HiLolivGr1

  Please refer to this thread images regarding the black squares

  Concerning

  Assani

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.