Black screen, message - no hard disk found, hum. Can't seem to open the page, need to help trip.

Similar Questions

• Equium A110-233: black screen and no HARD disk activity

  Hello

  problem trying to trouble shoot A110-233 for a friend. When you switch on the button lights up, don't have cd activity but no activity of HD and black screen.

  I have a two beeps beep message can not find the error codes to display errors, but I guess that's an error code.

  I tried to connect to external monitor but no output.
  I think that it is a possible motherboard failure.

  Any ideas would be appreciated

  > I think that it is a possible motherboard failure.

  I agree with you that it really looks like a malfunction of the motherboard.
  This could be the worst case because the motherboard needs to be replaced
  The motherboard is on the more expensive laptop parts and I'm sure the replacement would be a costly affair.

  But it seems that the unity of the A110 is not very old. Eventually the warranty is still valid, and everything can be done for free?  :|
  You should definitely contact the ASP in your country to clarify this point.

  Good luck

• Satellite 3000-214: after CPU upgrade no screen and no HARD disk activity

  Hey all,.
  I have a 3000-214 Satellite that comes originally with a PIII-M 933 Mhz. (SL5CG)
  http://videoff7.free.fr/sl5cg.jpg

  I ordered on eBay a second hand replacement (1133 Mhz) CPU SL5CK. (same number of pins, the same processor family: RH80530)
  When I go in, the laptop starts, but there is nothing on the screen and no HARD disk activity.

  So I asked the seller if he had tested the CPU, it sent, he said no and sent me 2 CPUs of replacement, another SL5CG and a SL64Z (which does not appear on the Intel site for some strange reason, but which is of the same characteristics as the SL5CG..)
  http://videoff7.free.fr/sl5ck.jpg
  http://videoff7.free.fr/sl64z.jpg

  The two processors give the same result with nothing on the screen and no activity of the HARD drive either.
  I checked my BIOS, it is the latest version: 2.30.
  Some laptops in the series 3000 Satellite (e.g. 3000-601), are delivered with a 1133 Mhz CPU (SL5CK) and also share the same bios exactly like my 3000-214. (upgrades to the bios on Toshiba website for my 214 & 601 are the same exact links and MD5 are equal). Also the 3000-601 & 3000-214 share the same chipset: Intel 830MP.
  But for some reason, it does not.

  EC which could I missed?

  It is always possible that all 3 processors that I was sent by the seller are dead, but it would be strange at this point, I think.
  So my question is, anyone have any idea what I might try to work or have experience with the upgrade a Satellite 3000 CPU?

  My warranty is looooong Sub anyway, so if a Toshiba employee could check in the basis of how fast max CPU can be used on the Sat 3000-214, I would be very grateful.

  Thanks a bunch for any info.
  Kind regards

  Alcahest

  Hello

  I studied a bit in the web and it seems that the Satellite 3000 has been bundled with Intel Mobile PIII 800, 850, 900, 1000 MhZ CPU

  I think that this will not work because of the speed of the CPU.
  In addition, I found this Toshiba document:
  http://support.toshiba-tro.de/KB0/FAQ5300W5000XR01.htm

  It is said that it is not possible to replace the processor in a laptop Tosh because processors are connected to the motherboard using a process called TCP tape carrier package.

• No installation of Vista, no hard disk found, click on load a driver to provide a drover massstorage for installation

  Hi, today a to install vista on my Dell inspiron 530, when I arrived at the place where you made to install the part windows, no hard disk found, click on load a driver providing a massstorage for installation drover. What should I do? My bios is on the default settings.

  Thank you

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Above are the Dell Recovery Options.

  You will need to for other processes of recovery questions abour Dell, contact Dell.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  It's recovery process from Dell, not Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• To turn off the Recycle Bin so that the files that you delete from your hard disks have gone permanently without having to empty the trash, what should you do?

  To turn off the Recycle Bin so that the files that you delete from your hard disks have gone permanently without having to empty the trash, what should you do?

  Original title: help

  Hello

  Hold down the 'Shift' key when you delete and it bypasses the Recycle Bin.

  See you soon.

• hard disk crash (intelligent control error 0303) cannot use the recovery

  I have a hp pavilion dv6-6050 and it crashed suddenly I can't use recovery option, because it cannot read hard drive

  I tried to connect the hard drive to another pc via sata-usb cable and the other pc has detected hard disk read errors

  How do I return the recovery partion so I can use it on a new hard drive

  Hello:

  You will not be able to.  When the disc is dead, it took the recovery with her partition.

  You will need to order a set of recovery discs, and they can only be used if you buy a hard drive of the same size or more large storage capacity than the one who died on you.

• Is it possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine?

  Hello

  I was wondering if it is possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine? In the affirmative, please could someone advise me on how to do it. Also utility management and disk transfer can be used in virtual machines to do this?

  Thank you very much

  Tim Auluck

  I'm not sure what exactly you are asking. Can you please clarify!

  Basically you can resize a virtual drive or add a second virtual disk to a virtual machine and transfer/copy files. You can also resize the virtual disk using VMware Converter for example.

  André

• Just did my laptop, tried to do windows updates and get a message T "here has been a problem the site witt" and can not open the page I requested at this time.

  Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on Express.com: the site has encountered a problem and cannot display the page you are trying to view.

  Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.

  You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3.  You will find two of them at http://www.microsoft.com/downloads - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.

• I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  Hi ddbowers01,

  The other shortcut keys work?

  Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

  Check the setting below:

  a. in the Control Panel, click user accounts.

  b. click on change the way users log on or off the power.

  c. Click to uncheck use the screen of welcome for a quick and easy connection.

  d. click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Safari will not open a Web site, open to all others. I checked with chase, the site that I can not open, they said that their system works. I closed the computer. The message I get is "" Safari cannot open the page because the unexpected server ""

  I have a mac-mini end 2012, OSX El Capitan 10.11.3, 2.5 GHZ intel core i5, 116 GB 1600 MHZ, DDR3

  When I connect to my Chase account using 1Password, I get the message "Safari cannot open the page because the server has quit unexpectedly the connection, try again later".

  I called Chase, their system is working normally. I rebooted the computer twice, I have tried for 3 days now.

  I went to Safari/Preferences, deleted cookies etc. All to nothing does not.

  Ideas?

  Have you signed up with before Safari?

• I bought cs5.5 in the past and I now try to download to my new computer, but can't seem to find the original for this disk. If I have my serial number in order to allow the download. What can I do?

  I bought the cd of the suite cs5.5 in the past and I now try to download to my new computer, but can't seem to find the original for this disk. If I have my serial number in order to allow the download. What can I do to get these programs to download to my new computer without having to buy them again!

  Have you tried to download it from this page? - Products download Adobe Creative Suite 5.5

• Popup connection needs to open the page full screen.

  I am using a login popup window which, after appropriate authentication, opens another page via a cflocation tag. Problem is that it opens the page in the popup window, not in a new window full screen as I'd like. I tried to apply a target to the cflocation url attribute, but that did not work. This is the first time I used windows pop up and it left me speechless. How can I get my new page to open in full screen?

  I guess that if you must do it with you must cflocate to a page that contains the appropriate JavaScript code.

  If you could do somehting like

  Then in the parentRedirect.cfm you would have something like

  This code is not tested, I will memory. He is also assuming that you use standard JavaScript of windows (for example window.open ())

  Jason

• SMART failure provided on hard disk 2: WDC WD 3200AAJS-55RY-AO (S1) __WARNING: IMMEDIATELY back up your data and replace your hard disk drive failure can be immenent

  Please help... I dunno what to do one day, I came home from work and my new about sony vaio desktop has been frozen, so I rebooted and now I have this message when I try to start and I do not have a vista disc or a recovery disc and am worried my lost data as I do not know how to save at this point because I can't even in the windows operating system Vista.  can someone help me please?

  We must believe the error message telling you that your hard drive is about to fail. If you are not technically proficient, take the machine to a local computer technician who will try to back up your data and then replace the hard drive. Do not use a type of BigComputerStore/GeekSquad of the place. Otherwise, you may be able to get the data saved by one of the methods below and replace the hard drive yourself.

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company. I use savers by car, but there are others. General prices run from $500USD on-site. Investors recovered all disk data on a portable player that failed for one of my clients, and it cost $2 700. He thought that it was worth the money; only you know what's worth your data. I understand that some insurance companies now cover fresh data recovery so check with yours.

  Drive savers - http://www.drivesavers.com

  For future disaster recovery programs:
  http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - don't panic!

• Get a message PhotoBase.dll is not found, reinstall it by trying to open the photo gallery.

  Original title: PhotoBase.dll has not been found, re - install

  While searching for the location of the file in my pictures, I get to a point where I get a message on "photobase.dll not found, reinstall it can solve the problem," this is whn I try to open the photo Gallery icon

  Hi SergioAndrade60,

  Perform the control and analysis of file system (CFS) auditor if this solves the problem. SFC toolscans system files and replaces incorrect versions of system files by using the correct versions.

  For instructions, see How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7 .

  http://support.Microsoft.com/kb/929833
   
  If the link above does not solve the problem, I suggest you write the topic in the following forum.
  http://answers.Microsoft.com/en-us/windowslive
   
  Hope this information helps.