BlackBerry Passport Protection - function remote control

Similar Questions

• Function remote control Toshiba Management Console

  Hello

  How do I use the "group level work simplified remote management" in the Toshiba Management Console?

  Is there a documentation about this feature?

  TIA

  Kind regards

  MD

  Hello

  To be honest I n t have much experience using this tool but as far as I know it s a part of Toshiba easy guard.
  Generally all applications supports an own help option.
  Have you checked it?

  There are more details and maybe you could find some info about the management group and simplified working level remotely

• BlackBerry Passport BB as a new phone on the rise and glued on the anti-theft function

  Hello

  I've been a faithful customer BB for 10 years and recently bought a refurbed unlocked Blackberry Passport on e - bay.

  I started to set up the phone, and once I got the Blackberry ID user name connection, my connection was not accepted as Blackberry Protect anti-theft is activated.

  While I tried to contact the previous owner (pending response), I try to find out if there is a way around this section of the introduction.

  I have 3 numbers and all phones blackberry - Q5, Q10 and now BB passport. They are so easy to use and convenient that I really want to get the implementation completed on this phone as soon as POSSIBLE, because it will be used for work purposes.

  Is there a way someone could help?

  Thanks in advance.

  jpcprocha

  Hello and welcome to the community!

  There is no way to move forward without these credentials. Theft protection is a very strong security feature and cannot be bypassed.

  You must get these credentials, complete the initial Setup with the credentials and throw then a WIPE on the device, again enter these credentials. After the WIPE, you'll then be able to use/create a new BBID during initial installation.

  If the seller will not provide you with the credentials, their next option would be for you to return the unit to them and to the steps above, except for the last part (for example, they should start CLEANING with their powers, but does not start the device upwards later), and then they send it back to you.

  The last option is so... If the seller has represented the device as being fully usable by you, and if they either of the above, then they distorted the device for you and should refund you. If they do not cooperate, use the functions of "Buyer Protection" eBay.

  Good luck!

• BlackBerry Z10 remote Controll of a BB10?

  Hello

  does anyone know a solution how a BlackBerry 10 remote control?

  Users travel somethimes came with questions or problems when they are not in the office. To check what they see / do would be the best for an overview on the things they see.

  Thank you and best regards

  Marcel

  Hello..

  When you call video call on BBM. . There is an option for the video sharing...  It will act as the Remote Desktop as PC but only you are going to have control on the receiver cant control the device of yours.

  Thank you

• Ring of the remote control for a updated firmware A77 camera REQUIRED emphasis comments functionality and design?

  Hello
  It is a good complaint and at the same time a good stand on a feature I'd neeeeeed really put in an update of firmware for the camera of the A77 as soon as POSSIBLE (as soon as Possible) like others, I have already asked for what he moooooonths there!
  I have spent the money of the month and time in a machine to control the update in order to focus stacking without touching the camera... It does not give the expected results, but maybe after all, I will succeed.

  But of course, it would look pretty cheap technology around an expensive Sony which does not any Thetering for this device 3 times the price other cameras with this feature, "Thetering", a term which means remote control the camera from a computer or IPod, mobile phone, etc.

  FUNCTIONALITY NECESSARY:

  Everything is necessary at least to do something, would be the ability to reallocate the shutter half pressed the button to advance a specific step. When the focus is narrow, few measures are necessary, but it goes further, steps may be greater. The camera would limit its course to the limits of the focus ring. Once the button out (so not half or completely down) or when the update has reached the limit of development more far, it would be to take a last picture and bring focus back to its position closest to you, ready for the next batch of photo.

  Pictures would be taken when completely down. If the focus is not the position of the closet before splashed the process, we could do it manually or select an option from the menu.

  Another possibility would be to reassing these 2 keys of the remote control features: a to make one step back, one to make a step forward. The advantage of the 2nd button that allows a remote control, would be the possibility of backwards if we went off for a step.

  Overall, it would take very little programming to do this. (mainly add a menu option and the operation of each time button x is pressed, focus moves a step forward, a step being of size proportional to the distance according to a simple formula. Same thing for a button Y in the opposite direction.

  (1) what is the best way to communicate this request to the right people?

  If someone expect this feature too, please comment!

  (2) also, where we communicate comments on design issues?

  Thank you

  Hello Mark,

  Welcome to the community forums of Sony

  Thank you for your comments and feedback for the SLT - A77.  The answer to both questions is, Right Here.

  We are able to pass all your firmware requests and comments and suggestions regarding the product directly to the Digital Imaging Group.

  We can't promise or provide an ETA, however, we listen and as owners of the NEX-7 can attest, we can impliment when we can.

• BlackBerry, Blackberry Passport questions

  Hello
  I bought the Blackberry (SQW100-1) passport in April 2015. Since then, I experienced some problems,

  1: shaking screen problem.

  2: If composing an email through hub, the cursor flashes and cannot use the word prediction.
  3: sometimes locking screen does not soon appear.
  4: lag in lock screen notifications.
  5; Shift of the camera.
  6: even if I hide BBM, facebook & twitter contacts in the contacts application, it does not hide.
  7: recently my passport for Blackberry is freezing, or auto shutdown, because I have to press and hold the power button for more than 5 seconds to restart the Blackberry and it's so frustrating and unreliable, what can be the cause for it?

  My device info:

  Model: Blackberry Passport

  Model number: SQW100-1

  Software version: 10.3.1.1779

  OS version: 10.3.1.2576

  Build ID: 835537

  Cryptographic kernel version: 5.6.2.44214

  PIN: {DELETED}

  Please help me soon.

  (Sorry for the grammatical errors, as appropriate).
  Thank you.

  MOD Edit: Edited post to remove the personal information in accordance with the Community guidelines and the terms and Conditions of use

  Hello and welcome to the community!

  This particular version of the operating system is sadly known to have a lot of bugs, which most have since been corrected. But, to take advantage of these fixes, you must update your operating system.

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Non-official methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Good luck and let us know!

• Example of screen remote control

  Dear Adobe,

  Would you be kind enough to provide the code example to use the remote control feature? Because here the methods http://livedocs.adobe.com/labs/acrobatcom/com/adobe/rtc/collaboration/ScreenShareSubscribe rComplex.html startControlling() and stopControlling() are not documented.

  Thank you!

  Hello

  Sample code for the ScreenShare control. Run a simple Subscriber at one end and the code below on a different ending to test ScreenShare controlling.

  We would change the docs to provide more information. Thanks for bringing it to our notice.

• 22D133B: replaced charger DVD - no play, pause, stop, etc via the remote control

  Hello

  I have a 22D1333B in for repair because it would not play the DVD. I replaced the charger DVD (part No. 75040787) and the unit will now play DVDs ok but the DVD section will not respond to the remote control.

  All other TV functions operate via the remote control without any problem. It's just the DVD section.

  I cured the last of them by exchanging the PCB on the new DVD unit with that of the old unit, but this certainly isn't the way to address this problem.

  I downloaded and installed the software on the site of Vestel and updated the software for the Toshiba site. The fault remains.

  Any help to solve this problem would be welcome.

  T.I.A.

  In my opinion the new DVD drive isn't fully compatible with the remote control (type) RC1910 that was included in the box.

  I think you should get in contact with the authorized service provider to fix this

• Satellite X 200-20s: remote control no information and no operation.

  It is a reasonable laptop if you do not mix the software, if you buy and install norton 2008 and Office 2007.

  Thought I would try a DVD on this point, on-screen controls works very well.

  Tried the remote control.nothing (RC6),
  Tried R/c in some programs to a DVD standard, no, I / R functions at all. OK lights up.

  Any idea on where to find all the information about the remote control anywhere on this earth?

  Toshiba seems to miss this out my booklets of instructions completely.

  Or is there a hidden place?

  Boyfriend sorry but I don't understand why you weren't able to find page 9 in s manuals for Satellite X 200. You can find a few sentences very important:

  + This computer is equipped with a remote control, which allows you to control * some * of your computers to outermost. +

  + * IMPORTANT *: +.
  + Remote is specifically designed for this computer. +
  + Some application programs * can not * support remote control function. +

• Windows 8 on HP TouchSmart IQ826t (including REMOTE CONTROL) successfully installed

  Here's the background.  I have a TouchSmart IQ826t running Windows 7.  I have installed on it, (same partition), Windows 8 RTM using a DVD.  The installation went without a hitch and Windows 8 is installed.  I've had two disappointments: 1) the possibilities of contact not only that it was very difficult to slide on the screen side and the only way to scroll from left to right was to use the scrollbar at the bottom of the screen.  (2) turner of the TV does not work, but I am hopeful that it will be the 26 Oct when Microsoft releases the Media Pack.

  Thus, the question that I continued to work on was the touch feature.  I came across an update from HP that I missed for Windows 7 called "NextWindow 1950 Touch Screen Driver Update", which was to improve the answer touch near the edges of the screen and resolved a problem of sensibility in the upper right of the screen.  I downloaded it, (sp49787.exe) and tried to install it.  He would not have installed.  However, the part "NextWindow 1950" of the title was a clue.  I have been looking on the NextWindow site last week and I remember seeing a driver Windows 8 touch screen on their Web site: http://www.nextwindow.com/nextwindow_support/Windows_8_Touch_Screen_Driver.html

  I took a chance and downloaded.  Before you try to install it, I created a new system in case restore point where and then installed.  The installation has maybe 4-5 minutes, but he reported that he managed.  Without having to reboot, I checked the tactile ability and WOW, it works now as my 7.5 Windows phone with lots of scrolling left and right as well as perfect sliding on the side of the screen!  Just to be safe, I restarted and everything works great!  Thus, it seems that the driver on the link above is the solution at least for my model.

  Chuck

  I found how to get the HP Remote to work with my IQ826t! I was reading something and it reminded me that I had never gone through the list of Services on this computer. I found a service that has been extinguished called, 'Human Interface Device Access. I changed the properties of it from manual to automatic. Rebooted and WOW, the remote will now control the Volume, Mute and other functions, he was ignorant. NOTE: Before I tried this service I also found a service called "HP Software Framework. It was also well manually. I changed it to auto - delayed, but I don't think that this has nothing to do with the question. First try the service of Human Interface. I rebooted several times and the remote control of the TV still works. YES!

• Satellite X 200 - 15 K and problem remote control

  I installed windows 7 x 64 on my x 200-15 k and the remote control does not work.
  I installed a few irda drivers found on the download page of Toshiba X 200, but still nothing, and it does not show any device irda in device manager...

  Is - this remote controller only for windows Vista (originally on my computer when I bought)?

  Thank you
  Milos

  > I installed some drivers irda...
  Sorry, but you cannot use some drivers and later wonder if the remote control will not work correctly.
  I checked the Toshiba download page and drivers Win7 for Satellite X 200 PSPB9E are not available.

  So when you have appropriate Win7 drivers, we can discuss about the functionality of remote under Win7.
  All you can do now is to test it with the drivers for the 64 bit version of Vista and hope it will work...

• Re: How to reconfigure the remote control for Qosmio F50?

  Hello
  I have a Qosmio F50, which came with a standard remote control for applications like media library etc, how do I reconfigure the keys to do exactly what I want it to do?

  For example the button power on the remote control to completely stop the machine instead of standby

  Thank you
  Dan

  Hello Dan

  Why do you think something like this is possible? What is this described in s operating manuals.
  If something like this can be done, it must be described in the manuals?

  In 10 years Toshiba has offered several different notebooks with the remote, but something like this was never possible and remote control buttons were always with defined function.
  You have some really cool ideas.

• Qosmio F20-132: Question on the use of the remote control

  Hi ppl, I just read the manual of my laptop and I realized something that I didn't realize before

  I can use my remote control without using the "infrared adapter" using the USB connection, but it does not work inside the Win XP MCE, but I can use it to turn on my laptop and off and use other features, I will try in the future to use some other aplications with the remote control. I guess many of you guys realized it when you bought your laptop, but I said at the beginning when I opened the package ' what the hell? remote control... but I really need this adapter? Sherazade, that sucks.

  by the way someone is using the remote control with other applications (such as ahead nero, chis tv, or linux inside)?

  Hello

  I downloaded the manual for this unit, and according to the information of the remote control receiver is required if you want to use the MCE Remote control.

  In addition, remote controls USB only works with Win MCE and so cannot be used directly with Qosmio Player
  Additional some application programs can not supported control functions remotely.

• Satellite A500 - 14 H - remote control does not work

  I have a Satellite A500 - 14 H with the big remote control, but it doesn't work.
  Can someone help me?
  I installed the remote control manager, but no change. He still does not!

  I assume that you got your laptop with preinstalled operating system.
  Have you tested the feature with the parameters of this plant?

  Is remote controller completely dead or some functions do not work?

• Remote control does not respond with Toshiba 24D3434DB

  I recently bought a smart TV 24D3434D.

  I was incapable of analysis for all channels when I bought because I didn't have an aerial socket in the room in which I used it, but I was able to use the tv feature smart until suddenly the TV displays a screen telling me that no channel was available and no longer responds to the remote control.

  I returned to the store and the tv started to react to the remote control again and they were able to search the channels it. When I House and rekindled it remote control not responding until I tried again the next day after I left it unplugged over night.

  In the morning, I found that the remote was working again until I plugged the tv in an adapter and not directly in the sector where the TV no longer responds to the remote control again.

  Anyone know why this is happening or what I can do to fix this?

  Thank you.

  > In the morning, I found that the remote was working again until I plugged the tv into an adapter and not directly in the sector where the TV no longer responds to the remote control again.

  What adapter do you mean exactly?

  The remote control works correctly if the TV is connected directly to the power grid?

  To be honest, it's the first time I encounter this problem.
  Perhaps some sort of light affect the functionality of the remote control, it is maybe s really a TV or remote hardware problem.

  I guess to see what s twist exactly you should test with a different remote or another TV and same remote control.