BlackBerry Smartphones Audible Air

I am a subscriber of audible.com and I listen to them on my Storm. The only program that will allow me to listen to the books (because of the DRM I guess) is Audible of Air. I put the program in compatibility mode, or I can't navigate. The main problem I ever minute or so, the sound stops for a few seconds before continuing. Streaming audio normal (mp3s). I utilisais.75 firmware. I upgraded to the fuite.83 and here's what happened in the sound atmosphere. For some reason, every minute or so, instead of making a break, the sound will jump 15 seconds and repeat what has been said. But the time of the counter will continue as if the sec 15 repeated sound played as usual, then cut and carry on as if she didn't repeat but played through normally. Therefore, never miss me minute audio of 15 seconds. I downgraded vers.75 and I will deal with the breaks.

Does anyone else have this problem? I can't be the only user of storm who listens to audio books from audible.com on their Storm

Well, I've upgraded a.113 and finally AudibleAir works with the storm as if in a dream. So far, no stutters, without breaks or audio stretch.

Regarding the sound air installation, if you have installed the sound Manager, trying to synchronize the device with the Manager to choose one of the blackberry options, it will install audibleair for you, just follow the request

Tags: BlackBerry Smartphones

Similar Questions

  • Update on 9360 bb curve blackBerry Smartphones software

    Hello

    my phone needed to update the software so I chose for her to do. However, it has reached the stage where it is back up my data, but it has now ceased on 12% overal completion for several hours. I took battery out and tried again, but it has again reached the same point and doesn't seem to make any progress.

    Any suggestions on what I should do? is there a problem with my phone or does it take time?

    Help!

    Nicola

    Two options to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.
  • Update blackBerry Smartphones 'Personal data' problem then 7.1.0 Bundle 1149

    Hello

    Whenever I go to download the update of the software ' 7.1.0 Bundle 1149' it comes up with an error at the end by saying that I need to remove "21.4 MB of personal data", so I wonder about what exactly is 'personal data', so I can take advantage of the new update of the system...

    I'd appreciate it if someone could return as soon as POSSIBLE, thank you.

    (Credit JSanders)

    There are two methods for recovering for you to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.
  • Frozen to the software update blackBerry smartphones

    I have a Blackberry Curve 9360 and it is frozen all by doing an update of the software (progress overall backup 13%).  It has been like that for the last two hours.  I tried to take out the battery, but it just goes back to the same screen when it restarts.

    Can anyone help please?

    Two options to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.
  • Using software update to blackBerry Smartphones.

    I had planned an update last night to demand for 2300 hour British. When I woke up, I found my phone was off and the charger was out of my phone. When you turn on again my phone, he immediately started backup software, which was going well until he started the social RSS update. Due to the fact he did not pay all night, it was not connected to a sense of network, it appears 'Social Feeds 0% '. Unfortunately, I can't leave this screen and so it tried to save social stream without connection for the last 6 hours.

    Thank you

    Tom

    Hello and welcome to the community!

    First - reduce the size of the font in your messages... the effect is the same as if you had used ALL capital LETTERS, for which this article could be useful:

    Now to your problem...

    (Credit JSanders)

    There are two methods for recovering for you to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.
  • BlackBerry smartphones 'there is a problem with Blackberry App World. Please try again. »

    Whenever I try to download whatever app world or click on my world, he always says 'there is a problem with the Blackberry App World. Please try again. "I can't download apps because of this, and I have consulted with my carrier in this respect. They said I should be able to access the universe of the app by wifi since I'm subscribed to a data plan Blackberry (BBM). They don't know what to do with my problem anymore. Everything else works except the app world. Help, please. BTW, I'm trying to access the app through a mobile internet captive universe. That this has something to do with it?

    Hi trishthestranger

    Please uninstall AppWorld options > device > application management.

    Scroll down to BlackBerry AppWorld > delete.

    or KB10040 : how to view or delete the application installed on a blackberry smartphone

    Perform a restart on the BlackBerry this way: with the phone smart BlackBerry turned on, remove the battery for a min. and then reinsert the battery of waiting until it reboot.

    Now, since your browser BB go to thewww.blackberry.com/appworld and install again.

    After installation go to app world and see if you are able to download on a PC, you can also try to scan the barcode of this application, it will request a download link on your device. Please try it and let us know. But like I said try to download Over the Air.

    Prince

    Click 'Like' If you want to thank someone.

    If problem resolves mark message (s) as a 'Solution', so that others can use.

  • Software of blackBerry Smartphones - frozen update

    Hello

    I use the 9860 Torch on Vodafone

    Last night I downloaded the software update (sorry don't remember what version) wireless and now uses the software update.

    It is stuck/frozen on the screen "Backing Up Your Data", it happened to RSS Social 0% and overall backup process 9% and has been like this for more than 1.5hours (now 4.5)

    Does anyone have advice for what to do, I looked for this problem and found answers but I am at a loss, as if they refer to my question, so some direct advice would be much appreciated.

    have you tried to remove the battery and put it again but it always freezes at the same point

    Thank you

    Hello and welcome to the community!

    (Credit JSanders)

    There are two methods for recovering for you to try:

    Method 1:

    • Open the Blackberry Desktop Software and connect your device to your PC with the USB OEM cable and without inserting the battery.
    • You will get three options: try again, update or cancel; Click Refresh.
    • Once, it is at the stage of initialization of 'pocket', insert the battery.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second method:

    • Start your BlackBerry in safe mode. KB17877 How to start a smartphone BlackBerry in Mode safe
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

    Good luck and let us know!

  • Phone and blackBerry Smartphone installation last firmware update starts

    Info on the device

    Carrier: Bell

    Model: BlackBerry Bold 9780

    OS version: 6... something

    I have BlackBerry Protect and made a backup yesterday (July 30, 2012)

    Apps and free space

    A battery pull fix your problem?  After trying to install the latest update, which continued to install after 4 hours, I pulled the battery.

    When you write your question

    How can I get the load to the top of the screen to access my phone?

    My phone had OS6 installed at the time it was released. Today, I decided to update to the latest version of the OS6. I downloaded the update through my device, and then click the button install. There is a prompt message warning that the installation can take 2 hours or more. After 2 hours, I started the monitoring device and noticed that there seems to be a pattern to the load up screen. 1 loading screen screen 2) black with LED light red 3) the load screen and then ends with a bright white screen 4) back to the black screen with LED Red 5) repeat this pattern.  I waited another hour to see if there was no change in the situation, but nothing. So I did a hard reset (battery pull). After waiting 5 minutes, I put the battery in and now I get this screen load pattern.

    How can I pass the loading screens to access my phone again?

    How do I erase and reload my camera?

    If I erase and reload my camera, can I recharge my BlackBerry protect the back upward?

    I would greatly appreciate any help or advice on this matter as soon as POSSIBLE!

    Hello and welcome to the community!

    (Credit JSanders)

    There are two methods for recovering for you to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.
  • Help blackBerry Smartphones! Issue of Curve 8520

    Hi all

    Please help me - I've updated my curve today but my PC is dead to half way through. Now when I turn on my phone it just comes up with a list (files, pictures, contacts, etc.) and the statesBlackberry platform 5.2.0.67. I try and close, click on them, but it just says error. How do I fix my phone back to normal?

    Help, please

    Hello and welcome to the community!

    (Credit JSanders)

    There are two methods for recovering for you to try:

    Method 1:

    • Open the Blackberry Desktop Software and connect your device to your PC with the USB OEM cable and without inserting the battery.
    • You will get three options: try again, update or cancel; Click Refresh.
    • Once, it is at the stage of initialization of 'pocket', insert the battery.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second method:

    • Start your BlackBerry in safe mode. KB17877 How to start a smartphone BlackBerry in Mode safe
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

    Good luck and let us know!

  • 9860 blackBerry Smartphones software update... IN CASE OF FAILURE

    Like a good little BlackBerry user, I followed the prompt to load a software update.  He asked the question, "Are you ready to be two hours without your phone or emergency access?"  I said, Yes, and he began "backup of your data.  Unfortunately, it is stuck at 6% in "progress in the backup set".  I tried turning off and re-boot and it always gets stuck at 6%.  If I'm doomed?  What I can do.  Will reads now and pray that he will magically fix itself from one day to the next.  If not, then I hope you smart people in these support forums will have the answer for me.  Thanks in advance for your help.     Stephani

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.
  • BlackBerry Smartphones Blackberry Bold 9930 update failed and the software does not load

    I have a Blackberry Bold 9930 and yesterdasy I received a msg saying to upgrade to 7.x software Blackberry. I followed the instructions (takes too long like 2 hours to download) and then. Big mistake because it cooked my phone. It seems that when you upgrade, the upgrade process goes thru, but stops after the time zone to restore the process and reports an error 602 with a reset button to reset your database. The reset button does not work and I restarted the phone to restore the db. At the moment that it restarts, launched the process, and even once, it failed after the msg indicating time zones (100% and overall restoration treatment 7%). Zones roughly completed, but then I got a msg saying I wandered 602 belive. On all courses was about 5 to 10 percent. Now my phone is undesirable because it does not restart. Verizon says they have a large number of phones across the country, but BlackBerry says it's a matter of Verizon...  Someone at - he already heard of this I am now without such a 4 days while I get a replacement Friday because of the holiday...  I am not very happy as another question, I found - during the upgrade process it used the cells instead of my wirelss home network to download the software and it really took about 2 to 3 hours, then another hour before it failed during the upgrade process. So about. 3 to 4 hours to play with an upgrade yesterday.

    Thank you

    Rich

    Hello merlin02131

    Welcome to the Forums of the BlackBerry Support

    Sorry to hear about the problem you are experiencing during the update!

    But you can still use Desktop Software for the update process, personally, I prefer never to do an Over the Air update. I think that something has gone wrong with the update process and thus you encounter this error 602.

    You have a backup of your device, or using BlackBerry protect for the backup?

    If you wish you can try several method to recover your device of this error, all you need is a PC and an Internet connection active. But attention, this method deletes the data user in this device. This is the Knowledge Base to follow:

    KB10144 : How to force detect the BlackBerry smartphone using the Application Loader

     

    Additional information:

    KB29237 : "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7

  • Update blocked blackBerry Smartphones?

    I was invited by my Bold 9900 that an update was available and I started the process.  I was warned that I would not be able to make an emergency call two hours etc., which was fine since I was at home.  However, 5 hours later and he blocked to "Backing Up your data '"Social Feed"0% 19%.

    I only am not tech savvy enough to understand why it would take so long?

    (Credit JSanders)

    There are two methods for recovering for you to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.
  • Update blackBerry Smartphones the my OS

    This morning I tried to update blackberry OS settings. I went into settings > device > software updates and choose the option to update the latest OS OS for my BB Curve 9360. However, it is now stuck on 11% BACKING UP a said was like this throughout the morning from 08:00. and the notice said that the fone will be inactive for only 2 hours. someone please help urgently as I am waiting for urgent appeals that I can't afford to Miss

    Hi Lemii_Loco

    Welcome to the BlackBerry Support Community Forums

    Personally, NEVER above the Air software update .the are a few suggestions for restore you your device from this situation:

    Credit JSanders

    There are two methods for recovering for you to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

    Prince

    ____________________________________________________________________________

    Click 'Like' If you want to thank someone.

    If problem resolves mark message (s) as a 'Solution', so that others can use.

  • BlackBerry® Smartphones getting fake email

    Hello:

    I seem to be getting the wrong email. It seems an ENCORE in Bournemouth in England is send someone elses email to my PIN in the Canada. I sent emails to person to get his BIS to stop, but she did not. I don't think she even knows or cares. What to do. It makes me crazy with 50 emails a day.

    To clarify, e-mails are sent to any PIN code. Rather, BIS pulls e-mails from an e-mail server and pushes them to the Messages of BB app under this integrated email account via BIS BB (for example, the e-mail on the device Setup Wizard). So, if you have only your GMail integrated with this BB, it must have some sort of redirection rule of sending emails to your GMail (which would be strange, indeed, I think)... but not to your BB PIN, for real emails don't get shipped PIN, only on the e-mail address.

    Either it was not a new device but rather was used and was not properly cleaned of all configurations before being sold... and you're the unlucky recipient of a sloppy seller does not complete what they need to do:

    • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

    To be sure, check inside the e-mail Setup Wizard and see what you have there... If you only have your GMail account, then something really weird happens... and I recommend to contact the seller and make them apply to 'new' State they represented as height (note that is what matters... packaging can always be made to air well... only the issues of representation of sellers).

    You can try the steps from the buyer in the KB above... but from what you describe, I honestly have very deep concern now on the total utility of this unit for you... He would never properly and fully usable.

    Good luck!

  • Loading stuck to blackBerry Smartphones

    Hello

    (Similar to a previous post problem: stuck on the update)

    I have a Bold 9700 a little over 2 years now.  I downloaded the Blackberry Desktop software on the RIM site so that I could update my phone OS 5 to 6 of the OS. What I've read here OS6 is not a good idea for the Bold 9700 as I found it.

    So here's the problem, I updated the operating system via the Blackberry Desktop Softwqare and everything was fine until the whole 5 minutes later the phone froze and since then not able to get it running. I think there somethnig to see with an App (iTookThisOnMyPhone) that is causing the problem. The phone turns on eventually (after several battery grips and 1 hour wait), but I can't go to the menu as the clock appears on the screen.

    I think to repair (given by Blackberry Desktop Software solution) is however kind I can keep the data on the phone? Should there be a backup of file when I have updated OS5 to OS6?

    Thanks for any help

    Hello

    A few thoughts for you...

    (Credit JSanders)

    There are two methods for recovering for you to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

    FYI... in response to your earlier question, yes it must be a backup file on your PC to all your data. If you have taken a backup manually, it will be everywhere where you placed it. In addition, when you perform an update via the PC, the software offers to take a backup - as long as you do not defeat this offer, then there will be a backup file on your PC. The desktop software should have the location for the backup files stored... Look at this configuration in the desktop software. Also, search your entire hard drive for files with the extension IPD or BBB (it depends on the version of the desktop software you are using). The results will tell you what you have available, with naturally those with the most recent date/time stamps being the more logical choice for you.

    For a stable start to the BB, you can also try Safe Mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient.

    For the drastic recovery, here are a few things:

    Good luck and let us know!

Maybe you are looking for

  • Apple ID security question is not displayed the reset option?

    Hey guys, so I hope someone here can help me, I spent 2 hours on the phone last night trying to solve this problem for my mother. She forgot the answers to his questions of security and cannot buy credits on games. The last time we had this problem,

  • New updates

    It allows to select the new updates on the phone - get you them by dragging to the left.  They can be suggestions of Siri. I've never seen these reports biased and inept - supposedly from the independent and the Guardian.  What a lot of guts!  Author

  • ENVY 4-1215dx: HPConnectedremoteservice.exe errors

    Yesterday HP ENVY 4-1215dx laptop computer my wife started having problems with the screen flashes every 10-15 seconds, and when you enter, the letters should be retyped because they do not take the first time.  The laptop is running 64-bit Windows 8

  • Pavilion dv6-4024tx: display random crashing after upgrade to Windows 10 (back to Windows 7)

    Hey all,. I used to own a computer laptop dv6-4024tx Pavilion which I gave to my father to use after you have bought a new laptop for my part. It was in pretty good condition when I gave it to him, with the only problem being that she would get very

  • Acer 10 switch wireless stops after unlock

    I have an Acer Aspire SW5 - 012 (switch 10.1 Acer) with Windows 8.1A Wi - fi connection stops after the release of the device very often. To restart the wi - fi adapter.I tried to install the latest drivers for wi - fi card, restore the system to the