BlackBerry Smartphones first ever Blackberry but no internet?

Similar Questions

• HELP blackBerry Smartphones: 9320 - Wifi connected but no internet

  Could someone help me solve this problem? Thank you

  Hello

  When you say that your WiFi is connected, I assume you mean that the WiFi symbol is white, correct? If so, there are a number of things to try. First of all, I would like to start by rebooting your device. To do this, remove the battery for 15-30 seconds, reinsert and wait for the device to reboot.

  Once you have done this, if it still doesn't work, go to your options of WiFi and remove the connection from your phone. Reboot the phone by using a battery pull and then reconnect to the WiFi network. If it still does not respond, you may need to check your router settings to make sure that your router is to give access to your BlackBerry. If you need assistance with this, please post back with the brand and the model number of your router.

  I hope this info helps!

• you want to buy first 14 elements but the internet on the island, I live on is very bad and cannot download a file that large. What are my options

  I would buy Premiere Elements, but has no way for me to download. Is it still possible to buy the disk

  You can check with Adobe Support for confirmation once. You can tell them that you don't have good Internet in your locality. They will certainly check and see what can be better done.

  Click always need Help (help), and then select the Chat option:

  Contact the customer service

  Or, as an alternative, you can download on the computer that has the Internet connection and then copy the installation of external drives files and then use the same to install on your computer.

• BlackBerry smartphones, I can't connect to internet Browser

  Hello

  My Blackberry Torch can not connect to the internet browser today.  I'm in Ajax which is just east of Toronto, Ontario, Canada.

  Electronic mail and cards work, but not internet.

  I am on a regular monthly basis plan and don't think I've changed all the settings.

  Where should I start looking for a solution?

  Thank you

  Mark

  Try a battery pull if you please, with the BlackBerry device powered on, remove the battery 15 seconds and then reinsert the battery to reboot the device. This will clear all hide as restarting a PC. Then try again and see if the problem persists.

• Pictures of blackBerry Smartphones showing on BB but cache when it is connected to the pc

  Hi please can anyone help because this problem is driving me crazy!  I have a Blackberry Curve 8520 and inserted memory card.  All I want to do is upload my pictures from the phone to my PC: I downloaded the latest media sync software and when I connect the BB, 16 photos only upward - there is more than that - and these are the old photos that have already been "deleted."  The pictures which I am posting on the phone are nowhere to be seen!  GGGRRRRRRR...  I looked at the properties of the photos that I can't download and they are listed as/DeviceMemory/home/user/pictures/IMG00173--I tried to activate the USB in the menu memory and I just get these 16 old photos.  I looked at the device on my computer and I see these 16Photos blasted in the 'images' folder in the folder of blackberry, but when I open the 'camera' album is empty!  How is that possible?  I think there may be a ghost in the machine, and I will be find out soon as the * beep * thing will be projected against the wall and stamped on repeatedly.  Help, please...

  On your device, go and move all these photos to the media card.  Plug in the device, then drag them from the media card reader with the workstation.

• download time about 4 hours, but the internet speed is good - 30mbps.

  My Apple TV takes 3 or 4 hours to download a rented movie. But my internet speed is good - 30Mbps. Internet high speed is not the problem. What is?

  Intermittent problems are often the result of interference. Interference can be caused by other networks in the area of or household electric goods.

  You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but won't make iStumbler household items.

  Refer to your router manual to know how to change your wifi channel or adjust your pace of multicast.

  There are other types of problems that can affect the networks, but it is by far the most common, so note the first. We see networks that have inherent problems work differently with different versions of the same software. You can also try to move the Apple TV away from other electrical devices.

  The following article can help you.

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  Sources of interference

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• WRT54G good signal wireless but no internet connectivity.

  I have a WRT54G that has worked well for about a year. Last Sunday, I installed a couple of small updates from Microsoft on my main computer (cable via an ethernet cable from the router). At the same time, I installed service pack 3 on my girls (wireless) counter top.

  Since that time, on my three computers wireless I shows the strength of very good signal from the router but no internet connectivity. Internet works fine on the computer by cable.

  I have reset the router, no luck. Updated the firmware, no luck. Released and renewed until the cows came home and still no luck.

  I uninstalled the router of my main computer and reinstalled. During the installation it tells me that the router cannot find the internet even if the computer that works is connected through the router.

  I tried a different router (even part old version) which was a router to work when uninstalled about six months ago. I went through the installation process and it is the same, the router cannot find the internet.

  Is it possible to have two bad routers that the internet can pass through but the router cannot detect?

  At first I thought changing the setting of the Microsoft updates, but I restored my computer to a date before the updates and still have the same problem.

  Any help that anyone can give is most appreciated.

  Well there are some knows the problem with Service Pack 3 from Microsoft with wireless connectivity. You can uninstall SP3 from your computer and it will not solve the problem.

• All equipment Linksys has stopped working! But having internet with NO LinkSYS equipment

  My setup is eccentric, but worked for a long time. It stopped working Friday. Let me first say there is a reason why I put in this way. The reason for my configuration is based on the location of the different IP and hardware when I bought at the origin of the material (in case your wondering why I am not a different route). All network card/devices and routers are Linksys. The LinkSYS device not only is a Netgear print server and 1 PCI card installed on a 2nd PC.

  Here is my configuration: A modem high speed, a wireless BEFW11S4 (4 port on the router). 1 unused port. Port 2 of a second wired router (for DIRECTV VOD and VUDU future) across the House. Port 3 to a local PC. 4 port wireless router WRT54G on the end of the House (I used one of the ports not the WAN connection). Wireless is enabled for both routers. DHCP is disabled except for router main basement. I treated all the routers beyond basement one as gateways by saying.

  My problem: I have several PCs with wireless cards / devices. That work is 1 XP Dell laptop, as shown below (not Linksys) and the fact wireless and also via a wired connection. Directv is also wired router (2nd line). The Wii also works or wireless router. Of course, my PC to the first router also sees the internet. All locations to see both routers with 80% of signal. My House is small, but limitations of the wiring, it's the best solution to get internet.

  MY PC, given models configurations are Linksys except as indicated:

  1 PC XP w/WUSB54G (USB adapter)

  1 2000 pro w / Netgear WG311 (PCI card) very old PC and sees no internet, what to look for and find two routers with high signal. Internet has worked in the past, though that is not used for a while. I can possibly assume it just does not work or can also be linked to this issue.

  1 Dell XP with internal wireless (works very well!) Will work with a router wireless and communicates also with print server with success.

  1 2000 pro w/WPC11 PCMCIA card

  1 XP with Linksys PCI card (don't have handy model number)

  I also changed the ports of wireline equipment to check that it was not a bad port. I have an internet connection on non-material Linksys. Some of the computers that I use on a daily basis, others not were lit in a time very long. After the problem, I decided to check these computers also. I did not any changes to the configuration. As I said I came home and noticed no internet and went to fix the problem. I used the Linksys software on all of the products listed to configure the network. (Supplied with each equipment original disks) It will show you, we can see the routers, shows NO internet connectivity but appear sees a router, it is not the internet. I want to emphasize that I did not change any installation, it just stopped without warning.

  Initially, I assumed that it may just be the wire to a router. (WRT45G). I have also unplugged all the material, renewed IP, rebooted the PC and modem repowered. What bothers me is that the DELL works fine, including being able to print, the Wii is very well and speaks and I can renew IP and download VOD since the second wired router and receiver DIRECTV. Also, I assumed that maybe it was a problem with a new patch from Microsoft, but some of the PC were not on months, although until this problem. Thank you for taking the time to read this long post. I tried to be as complete as possible. Any suggestions or ideas appreciated. I have found no solution on this forum or on the internet.

  NOTE: I also reinstalled 2 PC software, including returning my WEP. This has not solved problem either. Problem remains the same. I also checked the internet properties and network configs (on the PC) although I can't imagine every PC has changed itself.

  It doesn't seem to be an adapter or your computer problem, from what you described, I guess that your router has some problems of connectivity... You must reset your router and then re - configure both...

  As you explained that a computer for the first router connects to the internet, you can download the firmware of the router first and upgrade... You can download the firmware here

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Similarly, upgrade your second router and update its firmware... I think that after this, you should be able to get the connection on all computers...

• trying to erase macmini, but losing internet

  I need to delete my old MacMini, but the internet is not connected when I

  Turn it back on. My service provider said that it is a product problem?

  Thank you

  Why do you need Internet to erase the hard drive? According to your profile you are running Snow Leopard on your Mini. So, see the following:

  Snow Leopard erase and install

  Remember to only back up your files.

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Hello, this is a display caused the extension Advisor default McAfee site - please try to disable or remove that in case you have now until there's a mcafee update that may resolve the problem.

  http://service.McAfee.com/faqdocument.aspx?ID=TS100162
  https://community.McAfee.com/thread/76071

• Satellite L500 connection ok but no Internet after upgrade to Windows 7

  Hello
  I just upgraded my Satellite L500 to Windows 7 everything is fine except that I have no internet access. I have a strong connection to my wireless home network and can connect to other wireless devices to the network ok. I also tried to connect using cable, but I have the same problem - connected but no internet access.

  I ran ConfigFree utility and it does not find a problem. I ran the troubleshooter in Windows and it is unable to solve the problem but tells me that the wireless network doesn't have a valid IP configuration.

  I have reset the modem and the router, without effect.

  I checked all the drivers and BIOS are the latest versions.

  I tried to enter an IP address manually rather than get an automatically. Still no luck.

  Any ideas I can try? I hope someone can help.
  Thank you.

  Hello

  For me it sounds like that the problem is the router, and not the laptop because you wrote that with cable connected even happens on WLAN connection.

  If you go into the menu of the router, what is the status of the internet connection? Your router has a connection or not?

• HP envy 4520: JUST GOT MY FIRST EVER PRINTER HP

  Ive owned printers Epson and this is my first ever HP - I do a lot of needlework and want to expand models of books can I make because very few instructions of any description with the printer?  Other than how to implement

  The size of the copy can be defined as described in the document here.  I suggest to use dimensions 'tailor-made' rather than 'Fit to page '.  For the copy with the lid open as is the case for a book 'Fit to page' may not work correctly.

• connection exists but not Internet

  I router AI UN xavier 7968 cnnecte my pc connection exists, but PA Internet

  I router AI UN xavier 7968 cnnecte my pc connection exists, but PA Internet

  Please re-post this in terms of the language in the menu drop-down list at the bottom of the page. This forum is for English only.

  

  If you can't find the language you need, additional language support can be found here...
  http://support.Microsoft.com/common/international.aspx

• T510 - wireless question - connects to the local network but no Internet access

  Hi all

  I have a laptop Lenovo T510 with Windows 7.

  Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver 13.2.0.30.

  I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

  Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

  Please help me to get this resolved.

  Thank you

  Pavan K

  Thank you all for your support and your help... its working fine after re-starting the router

• Connection to the local but no Internet (CABLE)

  I am currently using a cable connection to connect to the internet. Yesterday after uninstalling ZoneAlarm and SuperAnti Spyware my computer connect to the internet.  The box works properly because my phone line crosses and it works. Usually, if there is a problem with the actual adapter (box), that the phone will not work. I have reset the box many times, turned off for 30 minutes and reconnected. All the indicators show that the adapter is connected and functional. But my internet is not working.

  I also have:

  1. Tried ipconfig/release / renew restarted.  It says media disconnected however the link blinks on my cable adapter. It doesn't have an IP address. "Media State...: media disconnected > connection - specific suffix DNS.:" He also says disabled BIOS.
  2. I also tried EasyTether as an alternate. The connection is done however I can't access the internet.
  3. I've updated all the drivers of network, they seem to work correctly, there is not! or X (yellow or red) beside him. Ipv4 and the IPv 6 are verified.
  4. I tried disabling my firewall.
  5. Fact that I clicked on lan settings-it says 'autodetect' and this proxy server box was NOT checked

  Nothing seems to work I'm about to throw the computer out the window. Help, please!

  Hello

  Try this process.

  http://www.ezlan.NET/clean.html#refreshnet

  Jack-MVP Windows Networking. WWW.EZLAN.NET