BlackBerry Smartphones not always connect to the internet to order but can still receive emails

Similar Questions

• Home wireless network users can no longer connect to the internet via router, but can connect to the network

  Modem Arris Touchstone telephony Windows Vista on PC, router Linksys WRT54G2, Netwk disk, Set netwk as private.

  My father's home network no longer works. All Pc's are running Vista. DSL is connected to the Modem Arris. Modem is connected by ethernet to the LinksysWRT54G2 router, that is connected to the PC. Other Pc is able to connect to the local network, but not to the internet. Main PC connects to the internet with a separate connection. See the other PC on the network. Daddy has no save the password and can not get him out of Linksys.

  Never mind. After 6 hours I fixed it. I don't know how I did it, but I think it was because I have unplugged and pressed the reset button on the modem for 10 seconds.

• Messages from blackBerry Smartphones not always display in the Inbox on the Torch 9800

  Hey there. I apologize if this has already been answered, but I search through the forums and have not yet found an answer.

  I have a Torch 9800. Since I got it, I noticed that, sometimes, the messages will appear in my Inbox. My phone will ring when I received it, and I'll have the 'new messages' icon on the home screen, but clicking on the messages icon that leads me to an empty Inbox.

  I noticed this behavior affecting the e-mail (my gmail account is the only one that I have will the blackberry), messages text and two customers different third-party chat.

  I have no message filtered to different folders, or something like that.

  By clicking on "View file" check my Inbox is selected.

  But that's where it gets weird: if I compose a new message and send it, when I go back to the Inbox, all messages are displayed.

  It's almost as if the Inbox is having a problem displaying the list of messages, but as soon as I push a new element to display (message sent recently), shocked it back to life.

  Any ideas?

  Thank you!

  246 has been shipped orig OS

  use a PC to day so you'll have a good backup.

  Manual device OS upgrade instructions:

  1. start by searching for your operator and the system operating file that you want to use.

  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  2. make a backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/

  3. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

  5. This step is not necessary unless there is a problem on the next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a full backup), then after you get the 507 error (no OS installed) then proceed to step 6

  6 remove the internet connection for PC and reboot the PC.

  7. plug the BlackBerry and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file was in.

  8. If you did step 5, restoration of the back upward. Follow this KB if necessary http://www.blackberry.com/btsc/KB10339

  Take advantage of the new operating system.

• BlackBerry Smartphones not able to access the internet with the new carrier

  I use a curve 9220. I was using the Vodafone network. But just shifted to Airtel. I inserted the sim card in the handset. Signals come very well. But I'm unable to access the internet even though I subscribed to a prepaid internet pack.  The messege is coming like this:

  Navigation via the cellular network is not part of the includedas of your current service plan. To browse the web, you should use the Wi - Fi or contact your service provider to change your service plan.

  When went to Airtel site for mobile internet settings, I had something like this:

  Your handset does not support live Internet settings. Please refer to the table below to configure the settings manually.

  Name of the parameter
  Account name:	Airtel (GPRS)
  User name:
  Password:
  «"" "Home page:»»"»	http://live.airtelworld.com
  Proxy:	Activated / no
  Proxy address and the server:
  Proxy port and the server:
  Data carrier:	GPRS or packet data
  Access point name:	airtelgprs.com
  Authentication type:	Normal
  Use preferred access point	NO.

  Please suggest what to do

  Only with BlackBerry 10 you can navigate without BIS, with old devices don't.

  * Like this post

• The new update will not be installed. I get an error message saying the validation could not do to not be connected to the internet, I'm always on the net about other applications.

  LLE iOS not install, get error message says that me due to the EIB Internet posting had no place. I'm always connected to the Internet with my phone in wifi. I tried just using the data in the cell and the same message occurred. I have this problem a wide and is there a fix in the works

  It is a known problem because Apple has released the iOS 9.3 update.

  You have to wait for Apple to release a new version of iOS.

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  Please see this link in the topic "successful."

  Creative cloud using Enterprise | Applications and updates

  You can use managed delivery of applications for the following:

  • If you need to exercise strict control over the applications installed on client computers.
  • If end-users have administrator privileges on the computer.
  • To reduce Internet bandwidth consumption by preventing multiple downloads of self-service.
  • If there is no Internet access on client computers.

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• HELP linksys wireless USB adapter: (model # WUSB54GC) "acquiring network address" not actually connect to the internet! ?? Windows xp pro

  Hello. Ive been at this for 4 days now, I can't find a solution. I'll try to remember as much as possible regarding what ive tried.

  here goes...

  long story short, due to unfortunate system errors, I have reinstalled my OS XP home to xp pro. PC works great now! problem is... now my wireless adapter wont connect to the internet.

  When I had xp home edition installed, I could just plug in the adapter, and a few seconds, it would connect to the favorite network. (with all settings on Auto) no problem.

  now that ive put in OS, it's just cycling "absorbing the network address" infinitely...

  his watch the access point, the preferred network, showing the signal strength and do not show errors in Device Manager. right-click and choosing fix do not work. It gets stuck @ renewing IP address scene. its not send or receive packets under status.

  He EXPECTED to be functional? It uses a 10-digit WEP key.

  Ive tried both the linksys wireless monitor and the windows zero configuration utilites.i since removed the lynksys software screen because it never worked anyway. WZC is that used to work on xp family.

  I used " ipconfig/all" to determine the values of the network on the host pc. I tried manually punching in those values (IP address, subnet mask, gateway and DNS settings, according to the suggestion of a networking of friends) on the adapter wireless itself; using tci/ip options. still does not connect.

  Ive tried different USB ports, all that seems to do is to change the number of the wireless connection.

  It just does not connect to the internet.

  I have the driver I need for this after contacting linksys. I also disabled windows firewall and the firewall/antivirus of 3rd party associated with the network.

  He knows questions w / windows xp professional and this particular wireless adapter? (WUSB54GC) that's the only reason why I can think of that is not connected.

  what I forget? internet hard wiring of an ethernet port is not an option because there is no ethernet card installed in the pc.

  any help is greatly appreciated in advance.

  Thank you.

  Sorry it took so long for me to return.

  It was a setting under working group which had to be adjusted from reinstalling windows. (something that has been disabled I forgot, don't remember what it was since its been like 3 weeks)

  that he got the running dhcp... That is to say. allowed 4 dependence to work progrmas, boom, problem solved.

  the adapter now works with the automatic settings, using WEP encryption. as it should, and it was.

  Thank you very much for the replies, I appreciated the help.

• My 6to4 network card can not start code 10. How can I fix it? I think he asks me not to connect to the internet

  My computer is an inspiron 1525 Vista Home Basic

  Hello

  The basics of the Internet runs on IPv4.

  03:54 is not necessary unless you click on and link that is configured as IPv6, where the name 03:54 (chahge IPv6 to work on IPv4).

  To turn on/off and set the IPv6 components - http://support.microsoft.com/kb/929852
  -------------
  Generally to evaluate wireless.

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

• PC will not stay connected to the Internet in the evening.

  (Moderator note: title was "network programs network networking Internet Web site Site Web Web Site URL")

  My Dell laptop that was purchased in March, 2012, had no problems to connect to the internet until recently.  Now it connects the morning, but stop connection from about 18:00.  Why is happening.  My router is Lynksys.

  Margaret,

  I guess that your laptop will connect to your wireless router.

  If your laptop loses connectivity each day at roughly at the same time (18:00), then the problem could be due to the interference of the networks your neighbor's wireless.

  There is a setting in your router for the channel to use for traffic wireless (channel 0 to 11).

  If you can find this setting, then change it. The best channels to use (with less interference) are 0, 6, and 11. Your router is probably set to one of these three (but can be assigned to any channel between 0 and 11). Change the string parameter (and try 0, 6 or 11... that we're different from the one that is currently in your router).

  If you can't control the settings of your router, try to do a google search on the brand of your router (linksys), model and word settings... you should be able to find a description on how to change the settings.

  If you want to get into more technical details, use the free utility called inSSIDer... it can be used to see exactly what interference your wireless router is your neighbors... to help see you in the selection of a channel which is not used by your neighbors.

• Microsoft LifeCam VX-500 works not when connected to the Internet

  Original title: Microsoft LifeCam VX-500 problem

  Microsoft LifeCam VX-500 in office his work on offline, but when I connect to the internet, its does not work?

  Hello

  1 when was the last time it was working fine?

  2 did you last modified the software on the computer?

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  See also:

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

  http://support.Microsoft.com/kb/969275

  I hope this helps.

• I can't activate it.  Acrobat is not to connect to the internet at work, and phone numbers of Adobe are disconnected

  I bought Acrobat and when I finished installing, it could not connect to the internet to activate properly.  I contacted my computer at work and it showed no problems with the firewall (which took us down to the installation) or our network.

  I also tried to use the phone activation, but the 2 numbers that the software provides are disconnected or simply false.  I thought they might be outdated, so I checked on the Adobe site.  1-866-772-3623 does NOT work when you dial the number.  I tried several times a day for more than a week.  The number of other (1-206-675-6222) is not even a job number.  What am I supposed to do?

  I have the serial number and the number of Activation and the Activation Type.  But I can not activate the software without the authorization Code.  Can someone help me with this realization that I made any good up to this point?  Is there a more current phone number to try to reach the hotline for phone activation Adobe?

  -Paul

  unless you have acrobat 7 or more, check your hosts file.

  for assistance only and other common problems, sign activation, or connection errors. CS5.5 and later, Acrobat DC

  If you have an older version, the activation servers are closed.  What's this (v. 7) the problem?