BlackBerry smartphones to connect to the desktop computer...

I used 4.7 OK and it was replicating my contacts and tasks to Outlook 2003.  All of a sudden, it stopped working and just says: connection to the desktop... I tried all cables usual USB re - install software change, different USB ports and scanned the forum.  Pine OK connect options watch my blackberry USB code options.  Bluetooth option is ghost, but I do not use this option... do not know if there is a link.  I have a Toshiba A300 with Bluetooth.  This worked OK until last Friday and I spent most of the weekend trying all the tips Forum.  I run Windows XP if that helps... Mark

You can just enter any number. I have AT & T and seized my number and it took. If this is not the case, there is a link on the site of berryreview to download.

Tags: BlackBerry Smartphones

Similar Questions

  • Remote assistance - unable to connect to the desktop computer using the remote connection

    Hello

    I'm currently running vista Professional 64 bits for portable and desktop computers.

    Problem:
    -I am not able to connect to the desktop computer by using the remote connection.

    Tried:
    -Setup the remote asstance for the Username (account login) designated
    -looked up the IP address
    -entering the IP then username and password
    Failed connection *.

    Little Question, too:
    -I run behind a router with 3 machines connected to the router, it would change my location from IP address? I think that's where I'm stuck at.

    The following article should you guide through the process and solve your problems:http://www.vistax64.com/tutorials/116361-remote-assistance.html.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Unable to connect to the desktop computer running Windows 7 laptop running Windows 7, both in my home network, using remote desktop

    My desktop (host) is running Win7 Pro and my (client) laptop is running Win 7 Home Premium. For the office, I went to the control panel and allows remote connections. When I try to connect with the laptop in my same home network, I get an error message: Remote Desktop cannot connect to the remote computer you for one of the following reasons:

    (1) remote access to the server is not enabled

    (2) the remote computer is disabled

    (3) the remote computer is not available on the network

    Now, the computer is on and I can see what he listed as one of my computers on network. In fact, I accessed the command of remote desktop by right-clicking on the desktop in the list of networks and by selecting Remote Desktop in the menu dropdown.

    Obviously, I am missing something or something wrong. Please help me to understand.

    What do you call the remote [DRC] host desktop desktop machine, IE. local LAN IP static, the laptop?

    See this help as possible...

    http://theillustratednetwork.MVPs.org/RemoteDesktopTroubleshootingChecklist.html

  • BlackBerry Smartphones phone connects to the computer

    my phone connect to my computer more. Help, please. I tried to reinstall the desktop software and it did nothing. I checked all the settings in my phone and nothing. battery pull and nothing. the last time that I am connected, it's make a backup when I upgraded my os phones. I use a blowtorch on the telus network. application Platform 6.4.0.210 version 6.0.0.448 (1907)

    I've had a few cases where the torch would not connect to the computer. I did a restart of the computer, and it was going well after. It is important that the desktop software manager is updated.

    After the re-definition of the computer, try a different USB port if there is still no communication. Also, try a different cable USB Blackberry. I had once a Blackberry USB cable go bad on me causing a lack of response.

    Jerry G.

  • BlackBerry smartphones can not get the Desktop Manager to recognize the connection to the device

    I tried for days now to get the Desktop Manager to recognize a connection on my phone so that I can sync my Outlook contacts and calendar.  So far, I deleted and reinstalled the Manager several times.  I downloaded and installed the driver package.  I tried to do a battery pull before connecting the phone.

    Whenever I connect the phone Microsoft "new hardware found" Wizard opens and it recognizes the Blackberry device but it cannot complete the installation of the phone because apparently missing a driver.

    I love the phone, but it is useless for me until and unless I can sync it with Outlook.  Any suggestions?

    OK, I found and fixed the problem!  It had to do with the new Windows assistant material not being able to find the driver for the Blackberry device.  When I did the uninstall process part included saving the pilot atl.dll.  I assumed it was the driver that I needed to make things work.  I searched on the C: drive for the file, and when the new device Wizard came I pointed to the spot.  The Assistant began to load the driver.  He asked another file that is part of the Service Pack 2 of Windows and I searched and found this one as well and directed the Assistant for her.  It finishes loading and the device is connected.

    The problem at the end of the day was that the wizard could not find the driver that he needed, even if it is there all the time.

    Thank you for the help, it lead me to the solution I needed.

  • BlackBerry Smartphones Priv - connection to the computer as a drive with cable...

    You can connect the Priv a PC with the cable to access as a drive, especially for access to the SD card?   I had assumed would be immediate, easy, but the laptop does just not see it connected...?

    Some good news.

    Finally, I can get it to connect, but better as "Mount SD card", do not use Android file transfer.

    Certainly, there are only going to transfer different files Android app link provided in the MTP option in the phone under settings, buffer, top right options - USB connection to the computer, I had to kind of work, but I think it's a one-way arrangement therefore does not allow fiddling with files or data on the SD card.

    With the option of mounting SD, its worth knowing that the phone is not yet recognized, you need to pass options while its connected, so when switching back to Mount SD, it appears suddenly!

    I managed to move some files autour, and if I drop in the DCIM folder, Camera leader, they then appear within the app Photos, without the need to got to the unit records.

    Is worth knowing when you're connected, more, but not all of them simply disappear with the handset, but all are in their proper place, moved or otherwise, 30 seconds or more after the disconnection.

    Question NEXT, related to this, but could start anew thread; In my photos, I always kept a photograph or a scan of my passport, driving licence and stuff, amazing how much it is useful.  Priv does not read this map file, even if its same region in Photos.  The Passport can be pdf, is it possible to move files between the laptop and Priv autour so that it can read the docs and other things or is it possible to create a file on the SD card where the docs can be submitted and read by the priv...?  Indeed, where are the docs on Priv?  Ive schedules of my son on the map, but they do not seem to appear anywhere in the private and they are the .docx files.

    Thank you.

  • How to share files and printers between windows xp desktop that is connected to a wireless router with a laptop running windows 7. printer is connected to the desktop computer

    Hi all.  I normally wouldn't have a problem with that, but I must be missing something.  I want to create a home network or small business between my desktop running windows xp pro sp3 and my laptop running windows 7 Home premium.  I want to share files and printers.  My desktop with windows xp computer is connected to a wireless router.  The printer is connected to my desktop as well.  My laptop is wireless with the wireless router.  I tried everything I can think of to get these two devices to the network.  If anyone can help.  Don't forget, my printer is connected to my desktop with windows xp and is connected to my wireless router which is connected to my cable modem.  Internet works fine.  the laptop with windows 7's wireless and internet works fine.  just impossible to get the two see each other or share what anyone.  Thank you.

    With respect to the sharing of printer (s), microsoft has a utility called 'Print Migrator'

    Download & install, create copy, send a copy to the other pc to share its use.

  • BlackBerry completely exhausted Z10 battery does not load when 10 BlackBerry smartphone is connected to the charger or usb

    Hello

    I have a BB Z10, two days ago, while the travel battery got completely exhausted and the phone got turned off. later, I connected to the BB charger and the phone does not charge, I tried to connect it to the USB, but it does still not load... just a constant red light nod. I tried to remove the battery for 2 hours and back and not luck it is plugged. Like I need my phone works, I tried to go to a service center but not able to locate one on the BB site, I bought a new
    BB Z10 battery and it worked fine. I went back to my place and it took about an hour for me and yet once again, the battery discharged and I am with the same problem now. Now, when I connect my Z10 to the computer (windows 8.1) I get a red + green slow light flashing and after say 20 minutes, it connects to the computer and the phone turns... and when I see the phone it says Exiting battery saving mode"" immediately followed by "turning off the appliance" and it loops constantly. "

    Help, please!

    It's weird, but not the first time I heard of this.

    See this: http://www.blackberry.com/btsc/KB36747

  • BlackBerry Smartphones cannot connect to the device.

    Hello

    I got a 8320 a few days ago, everything is OK until today...

    I tried to connect it to my computer, but the DM (4.7version) remind me ' unable to connect to the device. Please make sure that the device is properly connected and try again.

    Curve 8320

    Platform: 2.7.0.90

    App version: 4.5.0.110 (152)

    DM 4.7.0.32

    Windows XP Professional

    someone at - he a good idea on this message?

    Hello

    You have little free memory left on your device. 15 MB is considered to be low, you have 8 MB

    You have a lot of third-party applications on your time BB, icall, bbalerts etc?

    I don't know your level of experience, so if you know I'm sorry but if please read and let me

    not know if this is the case.

    Most people close the applications by pressing escape or the red button. This does not close the applications.

    Each application has an option CLOSE. For example, if you are in the calendar, press the menu key (spotted) and scroll down to the bottom CLOSE is listed. Go through each application and then press close. Go to the menu press browser and options select cache operations clear all categories and reached escape it will say cleaning memory

    Thank you

    Bifocals

    http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=9225#M9225

    If you follow these steps and face up to your memory, your phone will run smoothly. It will be

    also facilitate a good connection with the Office Manager. At the moment the habit

    to do a battery pull just before the USB connection.

    When you have cleaned everything you can, clean again. You really want to stay close to 30 MB

    If it is possible

    Please let us know if you need help with any of the steps.

    Thank you

  • BlackBerry Smartphones cannot connect to the device during synchronization

    Hi, first of all I'm new here so if I ask a question who responded... Sorry... could not find when I tried. ;-)

    I have a Bold 9000 with Desktop manager 4.7 and Vista SP1 on my desk.

    When I try and sync Outlook it gives me the following message... "unable to connect to the device. Please make sure that the device is connected. I can display media files etc in the Office Manager, but fail to synchronize? any ideas?

    Thank you

    Connect the unit to a main usb on the back of the computer and try again, let me know.

  • BlackBerry Smartphones to connect to the e-mail Blackberry devices folder

    Is it possible to connect to the mailbox to Blackberry 9000 with a laptop computer so that the computer plays a Visual display and the keyboard a bit as a dumb terminal.  I can't get used to the tiny keys and my eyes are not so good.  I know you can do this with an iPhone

    If there is no current solution, there should be, as everyone I know is it would be a good idea.

    R

    I found that this http://www.impatica.com is trying to do the job, thankls much for your time.

    R

  • BlackBerry Smartphones backup images via the Desktop Manager

    When I perform a full backup using the desktop software, it load the backups by looking at my most important files (messages & insertion etc.) but I never see it back up my images that I took with the camera.

    All images are stored on my media card when I use the camera on my blackberry. When you perform a save as above, these images get stored on?

    Many people use SyncToy to synchronize your card (or a folder in) to your PC.

    Sync is backup difference, same.

  • Custom blackBerry Smartphones to connect to the device rom error

    Hello

    First post here. I try to upgrade 4.7.0.164 to 4.7.0.167 and find that the charger reached "connecting to device rom" and crashes. After a minute or two, the process fails with a message "fatal error". and the operating system restores la.164 Storm. Tried different usb ports and repeated attempts. Either way, I am on Vodaphone UK and leaked os is now trying, as the current official version is well behind everything there. .167 is the recently released official version of Taiwan.

    Tried the Desktop Manager (internet disconnected) and the application loader, the same two problem.

    Any help appreciated.

    Adrian

    keep on the rear on all PC ports

    Try a different cable and try another PC

    see if the same result occurs

  • error 0 x 80070003 is received after trying in vain to connect to the desktop computer.

    Impossible to system restore, image, & seek malfunctions due to 0 x 80070003. I can not connect with the normal mode or safe because of what I assume it is a mistake to cache.

    Yesterday, I had installed expatshield in order to view the Olympics on the bbc. My laptop works well throughout the day. I turned off around 12:00 and then briefly turned on at 12:30 and it turned off at 00:35, no problem.

    I SLEEP and then at 11:00 I turn on the laptop and a very slow connection to the experience screen. I restart the computer and use the Startup Repair tool and use the system restore. I am able to connect to the computer, but whenever I start a video game, the laptop has lagged. My computer had shifted and then close because I tried to do a system restore. I saw a cache error that the computer off.

    When I try to do a system restore or a computer imagine I get an error. "An internal error has occurred. The following information can help you resolve the error: the system cannot find the path specified. (0 x 80070003). I am now unable to use Startup Repair tool and sign in.

    My laptop is an ASUS 17.3 inch G73JW series games

    Processor is an Intel Core i7-74OQM

    VGA is Nvidia GeForce GTX 460 M

    laptop is a year and a month 7

    Hi John McEVE,.

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

    Method 3: Scan the System File Checker (SFC) to repair corrupted files.

  • BlackBerry smartphones I have loaded the Desktop Software 4.5 on my computer - not able to load on the BB 8310

    Hello:

    I went on the Blackberry site and loaded the carrier ATT page software, Desktop software, it's on my computer, but when I plug my BB I can still see the white screen with JVM 513 error and the Director of office gives me again - no request is available.  How can I get the software to reload on my BB 8310.

    Please help, I don't want another phone, I like this one.

    Thank you

    Ladylaresa67

    Can be accessed through this site

    http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

Maybe you are looking for