Remote Control GPIB for R & S to set FSL Spectrum Analyzer "RF expected low distortion.

Similar Questions

• Satellite A200-1kh remote control driver for Windows 7

  Hi, I reinstall windows on my Toshiba satellite a200-kh and try to adjust the Control Panel, but could not find a driver or a program taking control remotely. Help me please!

  It comes to my IMG remote included
  http://www.nix.ru/Autocatalog/toshiba_notebook_rus/68500_rc_large.jpg

  Have you tried to install the Vista driver?

• Satellite A500 - remote control drivers for Windows 7

  Hello world

  I bought the Satellite A500, very happy with it, but I change the operating system (vista) to the RC of windows 7, it works very well, the only thing is that I can't find the drivers for the remote that came with the laptop. It works quite simply, no answer at all... I have not found a driver for the A500 in any case, even for Vista...

  All I know is that the remote works fine because I can use it on the media center to my Xbox 360! : p
  But from the laptop, no answer at all... I looked for everywhere, tried to install the driver remotely for other model of Toshiba, even the beta one for 7, but still the same problem...

  Your help is welcome, thank you for any response.

  Coch, France.

  Hello

  > I have not found a driver for the A500 in any case, even for Vista...
  It seems that the A500 is brand new on the market and I think drivers (Vista) which will be released in the near future
  You'll have to wait a little

  I think the Vista driver compatible with Windows 7.
  I installed Win 7 on my laptop and most vista drivers work.

• VI server activate remote control only for some controls

  Hi guys,.

  Is anyone know to allow control of only a few orders of façade when using web publishing tool? I have a few commands that I don't want not used remotely (it could be dangerous) and others I want to use remote.

  Thank you!
  Christopher

  
  

• Need remote control for Satellite A300 1NO

  Hello world!

  I would like to buy a remote control for my satellite A300 1NO, but I have found no information on this tool.

  Most important, it's a remote controls exist for computers laptop toshiba?

  Thank you!
  PG

  Hello

  I started a similar thread about remote control on Satellite A300:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37732

  If your laptop can be used with the remote control, you should get in touch with an authorized service provider. They sell all spare parts Toshiba and give you more information on this feature. :)

• Want to buy the remote control full size for Qosmio X 500-116

  Hiya,

  I am looking to buy a full-size remote for my Qosmio (little disappointed he did not come with one).

  First question is my machine not come with a remote control means that my machine will not work with a remote control? (the manual says that some machines come with them and others do not)

  I have looked on the toshiba site and did some research online, but nothing yet.

  If someone can point me in the right direction, I would be grateful

  THX

  Bren

  PS - It's the full-size remote, I am after not the slim size it (both are listed in the manual)

  Hello Bren

  In my opinion the situation is clearer:

  Some models are delivered with and without remote control. For remote control, you need equipment that send the signal (remote control you have in hand) and the device receiving the signal.
  Receiving so-called is built-in the laptop.
  If your laptop comes without remote control, I presume that he doesn t also have receiver inside.

  Following this logic, I don't think that your laptop works with remote but I do not understand what kind of remote you are writing about.

  I can only imagine that third part product with external remoter that can be connected to your Qosmio as USB device, you can buy. I'm sure that Logitech has these products in order to check a little Logitech page to see what they have to offer for multimedia application.

  Good luck.

• Non-responding TV/remote control

  My model #KDL - 52EX700 Sony TV does not respond for 4-5 minutes after ignition. My remote is a RM-YD033. Have replaced the batteries in the remote control, but still will not respond. All that is on, when I turn on TV will stay because I am unable to change anything for about 5 minutes. Help!

  Hello jrw4par, thank you for bringing your concerns to our attention.

  Follow these steps to troubleshoot a remote that no longer works or does not work properly:

  1. make sure the device you're trying to control works.

  • Plug it into an electrical outlet that works, you know.
  • Switch on the device with its own switch (not the button on the remote control).

  2. make sure that the remote control not less than 3 feet and no farther than 10 feet away from the unit.

  NOTE: With the help of the remote control too closely or too far could prevent the infrared (IR) beam to reach the device IR sensor.

  3. when using the remote, remember, so that it points directly to the remote unit sensor.

  4. If the remote control has the ability to be set for different functions (TV, comics, DVD, to THE, STB, etc.), ensure that correct operation is selected.

  NOTE: See the user manual to determine if the remote control has the ability to be set for different functions and, where appropriate, for instructions on how to configure these functions remotely.

  5. remove all the obstacles that may be in the path between the remote control and the unit. Glass doors or enclosures can affect the signal from the remote control. Try to open the glass doors to see if that makes a difference.

  6. make you sure the device IR sensor is not exposed to the direct rays of the Sun or fluorescent lights or halogen. Bright lights shining directly on the IR sensor can interfere with the reception of signals from the remote control.

  7. check that the remote control sends an IR signal.

  8 remove the batteries from the remote control, press each button two times, and then reinstall the batteries.

  9. install alkaline batteries.

  IMPORTANT:

  • Don't use rechargeable batteries.
  • Ensure that the batteries are inserted correctly by matching the polarity of the batteries with the + (PLUS) and - (LESS) the symbols in the battery compartment.

  10. do a power reset for the device or component that the remote is supposed to control.

  NOTES:

  • Most of the components can be reset by unplugging the power cord from the electrical outlet for a minute.
  • Refer to the operating instructions for the component to get specific instructions on how to perform a power reset.

  If this post helps you resolve your concerns, please let us know by accepting this post as a solution.

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• App remote control PS3

  Hello world.
  I don't know if this section is intended to solve the problems with the existing applications of Sony, but it seemed the most appropriate for my question. If it does not fit here pls move.

  The main reason that I bought this tablet rather than others was simply IR no other tablet support AFAIK. And it works fine with my TV, my SAT, my stereo receiver and even my fan seeling. I was sure that I could use with the PS3, because hey its Sony, it has Bluetooth, there is already a BT remote workin for the PS3 and it works with the PSP.
  I was shocked when I discovered that there is no way to control. I am not a developer application (still ) and therefor have little understanding of it. But given the remotefunctions existing all that we need is someone who can pack orders in an app for android.

  I don't want to be rude, but frankly I do not understand why Sony didn't already do. Even if they charge a dollar for it, they did already benefit in my opinion. And if its free, still more ppl would buy the Tablet because of this.

  To summarize, y at - it app for PS3 remote control or is a person workin on one?

  Lookin forward to your answers n have a nice day!

  -Chris

  Hello Chris,
  Welcome to the Forums of Discussion of the user.
  A Playstation remote control application for the Sony tablet is currently scheduled. There is no ETA at this time for its release.

• Impossible to use the IR remote control after you install Touchpad

  I have a C40 that was used with the infrared remote control successfully for months. I recently installed a Touchpad plugging directly into the 2nd port eNet.  The software is underway at 6.2.0.  Immediately after that I have connected and started using the touchpad, it was noted that the unit no longer meets the IR remote.  The base of the camera flashes when ar buttons pressed on the IR distance indicating that the IR signal is received, but there is no response from the codec.  Is this a "feature"?  Can I use the remote and the touchpad?

  Hello

  Touch screen and remote control cannot work side by side. Once the touch screen is connected, it takes full control of the on-screen display, allowing no changes from the remote control. This is expected behavior.

  Hope that answers your question.

  Thank you

  Saint André
  Telepresence solutions group

• Remote control for Toshiba Multimedia Center

  Hello everyone!

  I don't know how to make my remote for the Toshiba multimedia center work. The only instructions accompanying the product as a whole were safety guides and a quick installation guide, but nothing about setting up the remote control. When I press any button on it, the Multimedia Center are turned on, so no doubt is picking up a signal, but it does nothing. The only button that sometimes doing something is the key mute. I went into the remote control and OSD settings, and everything is checked. Remote control model is the RM-1500 and I changed the sensitivity settings, but none of them seem to have no effect. I'm trying to use it with Creative MediaSource Player, which I assume must have native support for it, but nothing works. So can someone please help me how should I set up?

  In addition, to support the application in the settings, what should I write in the 'parameter' and ' start in ' field?

  Thank you very much!

  Hello

  I m not similar with this Toshiba product but I suppose that the remote control doesn t need to be addressed in the special order
  I guess the Source Creative Media Player is not compatible or don t support the Toshiba multimedia center

• do I have to set my remote control receiver only?

  I have a STR-K790 receiver. I need the codes for a universal remote, unless I can fix manully

  Hi Stooney,

  You will need to use a remote control to set a radio station in the receiver STR-K790 system.

  Is the universal remote you are talking about is branded Sony? If you use a universal remote control from Sony, the control code for Sony receiver is 01 or 001. However, we are unable to provide support for remote controls designed by other manufacturers. Manufacturers may set different code numbers in their universal remote controls to identify the infrared (IR) signal of a Sony product. Thus, the code number used to operate a Sony product in one remote can be different from the one used by another.

  For more information on the planning of a third-party remote control, contact the manufacturer of the remote control.

  If my post answered your question, please mark it as an "accepted Solution".

• Remote control for FDR AX - 33 other than the app and phone

  Y at - it a wireless remote for the AX-33 FDR that doesn't require that use a phone or other video device. I want a small remote control that allows me to zoom in and out with out having to use the phone. I want the video to display on the screen of the camera. I would go back to the meaning of the lens so I could see what is recorded when I'm in the video. Using the phone to zoom in and out is clumsy and abnormal looking when I'm in the video. With a little distance which may be hidden in hand with just the buttons zoom and the start and stop buttons would be preferable. Half the time when I'm in the video, the final result shows that I record, as well as what I recorded on my phone that is in the actual recorded video. ******!!!! This use of wifi on your phone to a remote is not convenient for what I need to do. Give me a small remote control like it used to be with the older camera!

  Hi fredshulz,

  Welcome to the community of Sony!

  We suggest that you check the RMT-VP1K IR remote. You can set this with your tripod and connect the IR receiver to the Multi USB port on the camera and control it wireless using the Commander.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.

• Remote control for Apple TV

  Is - is this posible?

  Yes. Apple Watch has the Remote app, you can use to control your Apple Tv.

  Use your Apple Watch as a remote control for your Apple TV or iTunes - Apple Support