BlackBerry, the load curve smartphones

Similar Questions

• BlackBerry Pearl to curve smartphones

  I had a Pearl (well 3 in a week) before making my curve.  I does not uninstall the software and download it again when I got it.  Need to do with the Desktop Manager? or is it OK to use what has been loaded with the Pearl?

  Thank you

  What version did you have before?

  I found that explains the differences between 4.1 - 4.3: http://www.blackberry.com/btsc/KB05433

  I'm still trying to find what is different between 4.3 to 4.6

  You can always download the software. The operating system on your device does not depend on the version number of the Desktop Manager.

• BlackBerry Blackberry Curve Smartphones - question about symbol on the front screen...

  Hi all

  I have the blackberry curve smartphone lilac, and recently a little symbol "appeared" at the top of the screen, in the same place as the "new message", "new email address" etc. icons are displayed.

  It is a white circle with a white arrow pointing South West and black in the middle of the circle and a small red star on the top right of the icon, the same that appears in the top right...

  He now has a small number 2 beside him, assuming that I have now 2 new all what it says... However, I don't know what that means, or how to get rid of!

  Advice please someone?

  See you soon

  Katie

  Katie, Hello and welcome to the Forums of Support BlackBerry.com.

  You have two apps in AppWorld who call for an upgrade. Check App World > my world.

  And on your BlackBerry, in the list of your key messages, clear messages related to App World.

• BlackBerry Smartphones is frozen on the loading screen

  Hi all

  Please help me for the below raised concerns

  (1) having the blackberry bold 9900 that freezes several times. He stuck where I worked to get resolved from this question in general I removed the battery from the handset.

  (2) but now after placing the battery, he got to reboot and it's still stuck on the loading screen is. This happens several times

  Please advice for the same

  First of all, how long took. I remember waiting nearly 30 minutes once. It was a strange event, but others have reported similar occurred odd, waiting any longer.

  If the BlackBerry is really wrong at startup, follow these steps: start in safe mode. http://www.BlackBerry.com/BTSC/KB17877 immediately do a full backup. Delete the app or apps you recently installed. Remove all the other apps that read do not need. Reboot and see if the problem persists. If so, you can start in safe mode and remove additional applications and test again. If the unit starts up, add the applications that you need and restart as a test.

  If cann ot the problem you, do a security wipe and to test, and then restore backup and install apps. If the problem comes back after restoring the data, then you will need to determine what database is the problem. If the problem persists after erasure security, and before you restore, a clean operating system install using the desktop software.

• My Blackberry Smartphones BlackBerry keeps freezing on the loading page!

  Hi, I had my blackberry for a few months and only recently has he is not able to go beyond the black screen with "blackberry" and the loading on it bar!

  I tried to delete a contact from my bbm status thing and it just cut off! The gray loading bar constantly freezes three-quarters of the way along and does not move further.

  I tried many things, but none have worked, I was wondering if anyone knows how to move and stop it to halfway along the bar of freezing?

  Thank you very much.

  Hi and welcome to the Forums!

  Since you did not specify on what you have tried, we risk redundant advice. So, the first thing is... at all times a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  If it does not, then do it again, but leave the battery for at least 10 minutes. Makes no sense, I know... but sometimes it helps.

  If who does not work, then please clarify exactly what you were doing... "remove someone from my bbm status thing and just cut" is not terribly useful for diagnosis... Please be as precise and detailed as you can be.

  Best!

• BlackBerry Blackberry Bold 9700 Smartphones blocked (or stuck) with 99% of the loading bar HELP!

  Hello world!

  Well, everything is explained in the title, my blackberry bold 9700 is block 99% of the load bar when I reboot it.

  Yesterday I had like 3 or 4 updates to some app and then I reboot but now it's blocked... I try to remove the battery several times, did not work, I try to use alt + shift + del several times, did not work, I try to use BBSAK but the blackberry cannot recognize... I don't know what to do and the worst part is that I did not do backup everything (ok so I'm little kind of stupid, but...)

  In any case of me HELP

  Thank you!

  YES! I found a solution! Working on it since yesterday! It is an application that has been blocked my BB

  So for all of you who have had the same problem here's what I did: I use the AppLoader, you will find cor D, F no matter) / Program Files / Common Files / Research In Motion / AppLoader / loader

  Launch the loader and connect your blackberry to the PC by USB. BUT it must detect the blackberry before the loading bar reach 3/4. So when the blackberry is detected, quickly click Next, then you should have a list of all your applications. Now deselect the application causing problem (or if you don't know which deselect all to remove all) and then click Next. PLEASE KEEP IN MIND THAT THE LOADING BAR SHOULD NOT SPEND 3/4. After that it's going to be something and if you see that it blocks just to make a reset in now alt + shift + del 2 times, wait, she returned to the loading bar and try again to detect the phone in the AppLoader who does not close during this manipulation... After all, that things blackberry should restart and hope for you, came back to life. So, in my case, I lost all my photos (don't know why), but at least I'm keeping all my contacts and messages. In any case it's better like this than all lost...

  Sorry for my bad English, I think that everything is not really clear, but perhaps that might help someone...

• My "BOLD" of blackBerry Smartphones is turned off as soon as the loading page less reaches the quarter

  Hello, I woke up this morning and my phone was working fine. I am back asleep and woke up it was off and everytime I try to turn it on I see the red light and then it starts to load until it reaches the quarter or even less, and it shuts off and restarts with the red light and the loading page... etc. What should I do? I mean my phones not died and I bought a new battery for it, so the problem is not the battery

  If your BlackBerry is still under tension turned off with a black screen, or constantly restarts, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• Storm blackBerry Smartphones constantly repeats the loading screen! Help, please!

  One minute, he was doing fine, then I pick it up and it is just repeating the loading screen (for example the white background with the black dial of the timer and place) again and again. Y at - it something I can do? I tried reset hard, but nothing! Arghhhhhhhhhhh.

  Oh no, my phone would not do anything except the initial loading screen after a hard reset. At the end I had to update without backup all my stuff so I lost a LOT of things, but it's now runnign less time there never... so I guess it was my phone just say mew that it takes a little update or something. But thank you

• Smartphones from blackBerry Storm 9530 stuck on the loading screen.

  My Storm 9530 has been slain on the loading (white screen with clock spinning black) for about 16 hours screen now. I tried several battery grips and battery pull with SIM card by pulling. Nothing works.

  Does anyone know how to reset or otherwise to get this thing to the function?

  To do this: unplug the USB.

  Download the operating system on your computer and install it on your PC.

  http://www.BlackBerryForums.com/General-9500-series-discussion-storm/

  Follow the instructions in the thread to install OS for your model in the upper part of this link.

• BlackBerry 8520 curve Smartphones does not and cannot go on safe mode. Help!

  Hello. I have a blackberry curve 8520. with version 5 OS. a few days ago, my blackberry just stopped working. I tried to restart with a hard reset (remove the battery for about 5 minutes), but the loading bar freezes at about two thirds of the way. I read online that I should try to go to safe mode by pressing the ESC/arrow-back when I reset it, I have tried, but for some reason, it does not. He is always stuck at two-thirds of the way and not respond. someone advised me to connect by cable to a laptop / pc. Yes, I did. but since he is not enabled "" the custom of the computer to recognize the device. I tried this several times here, but nothing seems to work. Help!

  Hi Aquileon

  Welcome to the Forums of the BlackBerry Support

  Your device is not recognized or detected, then you try the application loader to force detection to load the operating system, but this method will delete all the data in your device, if you have a backup or using BlackBerry Protect your restore your data again. For help, refer to this Knowledge Base:

  KB10144 : How to force detect the BlackBerry smartphone using the Application Loader

  Please try it and let us know.

• The evil of Smartphones from blackBerry Device Software upgrade: "device has insufficient memory space.

  I have currently dropped. 5.0.0.32 8 and you want to upgrade to the latest version because the missions here, the most recent version can solve some problems I'm having with the PC recognize the device memory and map Media.

  Device memory Total 879,2 mb

  The device memory 2.5 MB free space

  14.8 GB memory card

  14 GB free memory card

  Under device memory/Device membory/home/usr

  in these cases, I have NO files

  audio books

  documents

  music

  photos

  podcasts

  ringtones

  Parameters

  videos

  VoiceNotes

  I perform a fresh restart

  connect to: http://na.balckberry.com/eng/update

  Click on the button "Check for Updates".

  Current task...

  then, always during the loading of the ringtones, I get the error:

  "peripheral not a lack of storage space for accomondate appliction selections."

  I don't see how I can remove all of the files that are more out of my device memory.

  What is the solution here?

  The device memory 2.5 MB free space

  1. that ^^ stands for me as a red flag. 2.5 MB of free space is too low. You really need clear a space of memory, applications, etc., from your device or you continue to have problems.

  2. I do not recommend the upgrade route based on the web that you are trying to do. I've seen too many problems.

  Do the upgrade manually.

  First save your device completely, using the Desktop Manager. Then close DM.

  Then, follow the instructions IN this link and downloading the 5.0.0.41 OS 9 for the Storm 9530

  (I guess you have a 9530, it would be useful to the future of your State apparatus model - there are four different models of storm).

  http://www.BlackBerryForums.com/General-9500-series-discussion-storm/214688-latest-OS-9530-5-0-0-674...

• How to show the loading (wait screen) with animated image dialog between the screens

  Hello

  Can anyone show how to insert the load between two screens dialog, while the second screen is taken

  loading time?

  I tried the examples given in the forum but no luck

  There is an update about it here:

  http://supportforums.BlackBerry.com/T5/Java-development/sample-quot-Please-wait-quot-screen-part-1/t...

  Note comment added to the article as well - this is a useful Variant.

• Possibility to save script palette menus and load curves?

  Is it possible to Photoshop CS4 script palette menus? Specifically, the "save curves preset...". ' and 'load curves Preset"... the range of settings.

  I have 600 photos, some of which have layer > new adjustment layer > curves applied.

  I want to save the curves using the name of the image. Later, I want to be able to load the appropriate curve.

  For example, for image001.tif, the curve would be image001.acv

  (I already have a loop set up to browse files and get the file names.)

  
  

  
  

  I can't help with Applescript (or even know if it is possible to do it with only Applescript). And to my knowledge you can't have things script in dialog boxes like load or save the curve directly. But here's the javascript code which will load and save settings.

  First of all the easy part, defining an adjustment of the layer of a file.

  function loadCurves( file ) {
      var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putEnumerated( charIDToTypeID( "AdjL" ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
      desc.putReference( charIDToTypeID( "null" ), ref );
          var desc1 = new ActionDescriptor();
          desc1.putPath( charIDToTypeID( "Usng" ), new File( file ) );
      desc.putObject( charIDToTypeID( "T   " ), charIDToTypeID( "Crvs" ), desc1 );
      executeAction( charIDToTypeID( "setd" ), desc, DialogModes.NO );
  };
  

  The code to write that file .acv an adjustment layer is a bit more involved and does not work with all color modes

  // Works with RGB or CMYK images.
  // Does not work at all with greyscale, or indexColor
  // Does not work correctly with Lab
  File.prototype.writeByte = function(b) {
    this.write(String.fromCharCode(b));
  };
  File.prototype.writeShort = function(ET,s) {
    var self = this;
  if(ET == "BE"){
    self.writeByte(s & 0xFF);
    self.writeByte((s >> 8) & 0xFF);
  }else{
    self.writeByte((s >> 8) & 0xFF);
    self.writeByte(s & 0xFF);
  }
    return self;
  };
  function convertBCD( num ){
      var res = new Array;
      if(num > 16 ){
          res.unshift(1);
          num = num - 16;
      }else{
          res.unshift(0);
      }
      if(num > 8 ){
          res.unshift(1);
          num = num - 8;
      }else{
          res.unshift(0);
      }
      if(num > 4 ){
          res.unshift(1);
          num = num - 4;
      }else{
          res.unshift(0);
      }
      if(num > 2 ){
          res.unshift(1);
          num = num - 2;
      }else{
          res.unshift(0);
      }
      if(num == 1 ){
          res.unshift(1);
      }else{
          res.unshift(0);
      }
      return res;
  };
  function getCurve( numberOfPoints ){
      this.getPoints = function(){
          this.tempArray = new Array;
          this.tempArray.push( rawDesc.charCodeAt( pointer ) );
          pointer = pointer + 2;// set pointer to next point
          this.tempArray.push( rawDesc.charCodeAt( pointer ) );
          return this.tempArray;
      }
  
      this.pointsArray = new Array;
      for( var i = 0; i < numberOfPoints; i++ ){
          pointer = pointer + 2;// next point
          this.pointsArray.push( this.getPoints() );
      }
      pointer = pointer + 2;// next curve
      return this.pointsArray;
  };
  
  var ref = new ActionReference();
  ref.putEnumerated( charIDToTypeID( 'Lyr ' ), charIDToTypeID( 'Ordn' ), charIDToTypeID( 'Trgt' ) );
  var rawDesc = executeActionGet( ref ).getList( stringIDToTypeID( 'adjustment' ) ).getObjectValue( 0 ).getData( stringIDToTypeID( 'legacyContentData' ) );
  
  var pointer = 2;// used to read rawData similar to reading a file
  var flag = rawDesc.charCodeAt( pointer );// char at offset 2 always == 1 so use to validate data
  if( flag != 1 ) forceError;// unknown problem with rawData
      pointer = 6;// update pointer to BCD byte
      var bcd = rawDesc.charCodeAt( pointer );
      if( bcd < 0 || bcd > 31 ) forceError;// check for valid value
      if( bcd == 0 ) forceError;// an empty adjustment - no curves to process
      var bcdArray = convertBCD( bcd );
      var numberOfCurves = bcdArray.toString().match(/(1)/g).length;
      var curvesArray = new Array;
      pointer = 8;// set pointer to start of curve data
      for(var i = 0; i < numberOfCurves; i++ ){
          var numberOfPoints = rawDesc.charCodeAt( pointer );
          curvesArray.push( getCurve( numberOfPoints ) );
      }
  // now need to map rawData curves in curvesArray to known channel curves
  var acvArray = new Array;
  if( bcdArray[0] == 1 ) {
      acvArray.push( curvesArray.shift() );
  } else {
      acvArray.push( [ [0,0],[255,255] ] );
  }
  if( bcdArray[1] == 1 ) {
      acvArray.push( curvesArray.shift() );
  } else {
      acvArray.push( [ [0,0],[255,255] ] );
  }
  if( bcdArray[2] == 1 ) {
      acvArray.push( curvesArray.shift() );
  } else {
      acvArray.push( [ [0,0],[255,255] ] );
  }
  if( bcdArray[3] == 1 ) {
      acvArray.push( curvesArray.shift() );
  } else {
      acvArray.push( [ [0,0],[255,255] ] );
  }
  if( bcdArray[4] == 1 ) {
      acvArray.push( curvesArray.shift() );
  } else {
      acvArray.push( [ [0,0],[255,255] ] );
  }
  var myACV = new File('~/desktop/myCurve.acv');
  myACV.open('w');
  myACV.writeShort( 'LE','4' );// acv header
  myACV.writeShort( 'LE','5' );// acv header
  for( var i = 0; i< 5; i++ ) {
      var numberOfPoints = acvArray[i].length;
      myACV.writeShort( 'LE', numberOfPoints.toString() );
      for( var p = 0; p < numberOfPoints; p++ ){
          myACV.writeShort( 'LE', acvArray[i][p][0].toString() );
          myACV.writeShort( 'LE', acvArray[i][p][1].toString() );
      }
  }
  myACV.close();
  

  I wrote this earlier. It may be possible to simply write the header of acv, then add the raw data from the descriptor to work with other modes of.

  Also, neither verifies that the selected layer is a curves adjustment layer and will fail if it is not.

• Since the loading of IOS10 my iphone 6 is acting funny and often blocks. I'm alone, or is it typical?

  Since the loading of IOS10 my iphone 6 is acting funny and often blocks. I'm alone, or is it typical?

  Looks like you have problems with your iPhone.

  Have you tried to reset, restart or restore again?

• MacBook Air 2015 is stuck on the loading screen after installing the update.

  I installed the updates on my MacBook Air and when I restarted the loading bar would stay right in the middle. I used the disk utility in recovery 'first aid' my drive mode, it was fine. I tried to start in safe mode, but the loading bar cling just at the end I reset the PRAM, but nothing works. Help, please.

  * Loading Bar *.

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.