BlackBerry Z10 unable to connect to the Eduroam network

Similar Questions

• BlackBerry Z10 unable to connect to the Mac

  I can't connect to my z10 on the network. When I try it try to connect for a few minutes, and then it just says: connection failed. I then try again and put my username and password, but after a few minutes of trying to connect it fails.

  I'm on a Mac.

  Any ideas?

  EDIT: I am able to connect via USB if I disable my wireless (aka airplane Mode)

  Turn off wifi and try to connect with the usb cable

• Satellite L650 - unable to connect to the public network (has no valid IP address)

  Hello

  Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

  I have visited many forums and did everything, but of no use.

  1. people with disabilities the tcp/ip V6 of the registry.
  2. the DHCP is enabled. With the help of the automatic IP (DHCP)
  3. also tried with a static IP configuration.
  4. uninstalled the antivirus provided with laptop computer (Norton).
  5 disabled the windows firewall.
  6. restored to factory settings.

  I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

  Can someone please give some other suggestions for this problem?

  Hey,.

  Can you connect to your home WIFI router correctly?

  If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

  What you can try is updated WLAN driver from Toshiba's official website:
  http://APS2.toshiba-tro.de/WLAN/

  If it doesn't work, ask the person contact I mentioned.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Satellite C660-1NJ - unable to connect to the wireless network

  Hi guys

  I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

  Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

  I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

  Can someone help will appreciate it greatly!

  Hello

  Are you able to connect to open WLan?
  I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
  Of course, you should only done for testing purposes

  If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

• G5E22EA #A2N: unable to connect to the wifi network

  When I turn on the wifi in my HP Pavilion 15 laptop pc and try to connect to my network of your choice... it says "check and connection. After a minute, it says "cannot connect to this network '...

  I tried to use the other pc and smartphones to connect to my network of your choice via wifi and they connect successfully and I can use wireless net in other devices!

  Hello @Khaled-819.

  Thank you for your query,

  I understand that you are unable to connect to your wireless network, but other devices connect correctly.

  Have you ran the Windows troubleshooting tool?

  Did you run the Internet functionality and security in HP Support Assistant ?

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  If you are unable to connect I would test for a hardware failure.  You will locate network under the title of part.

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  To say thanks for the reply please click the thumb up below.

  If you were now able to solve your problem please click on accepted the solution to help others.

• BlackBerry smartphones can not connect to the Mobile network

  Hi there, I really hope that someone can help me with this frustrating problem. I have a Verizon Blackberry Curve 8530 I bought on eBay. I have not had any problems to get the phone activated and it worked like a champ. A few days earlier, the battery got very low and my connections disabled. I charged the phone and now it won't let me connect to the mobile network! When I select the option it tries to connect and a red 'X' appears and it does not connect. However, it WILL connect to WiFi. WTF.

  Hello!

  I suggest the following:

  (1) dial * 228 and select Option 1. To make again, and select Option 2.

  (2) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > (it matter little what line is current) > sign up now

  (3) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (4) batt Pull Reboot

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you must contact VZW for assistance.

• ESXi 5.5 - unable to connect to the management network

  I've been using ESXi for v3.  I have a small cluster of HP DL360 G5 where I was using ESXi 5.1 update 1.  I brought a new DL 360 G5 into the mix and decided to install 5.5.  After the installation, I'm going to set up the management network as usual and even after a reboot, I'm unable to access the site via http or the vSphere client.  For help, I installed the version of HP with CIM providers and I installed the stock VMware 5.5 with current pilot Rollup and they all exhibit the same behavior.  It starts fine, but I can't connect to the management network.  Curiously, however, they address IP does not respond to a ping.  I installed the 5.1 update 1 on the same server and it works fine.  Does anyone have an idea on what's going on?  Are there recommended troubleshooting steps?  It's strange to me because the ESXi has always been very reliable on HPs.

  Thank you - Greg

  Hi Greg,.

  Welcome to the community of VMware,

  To begin with, the latest version of ESXi, VMware supports the Proliant DL360 G5 has ESXi 5.0 U3.

• Unable to connect to the WIFI network.

  Original title: Need computer help laptop to connect to the WiFi at home

  I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

  Hello

  1. what exactly happens when you try to connect to the WIFI network?
  2. do you receive any error messages?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you try the procedure described in the article and check out them.
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  Alternatively, you can check the link for more information:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122

  Method 3:

  If the problem persists, you can temporarily disable the antivirus software and check.

  (a) click Startand then click run.

  (b) copy and Paste the following text in the box run command and then press enter:

  wscui.cpl

  (c) in the Windows Security window, click Virus Protection.

  (d) if the software is activated, display information about the antivirus program and note the name of the application.

  (e) click Start, click programs principally made and then look for and run the anti-virus program.

  (f) temporarily disable the software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps!

• New Designjet T520e unable to connect to the wired network

  I have a problem with a brand new Designjet T520e that can not connect to my network cable.  Said! No connection

  I can see the lights suitable for connectivity to the plug on the printer and on the switch.  Have you tried replacing it with cables and ports from the switch, the speed setting of port on both printers and spend 100 full instead of auto.   It connects to the wireless network, less desirable in this situation.

  All revelation?

  The cable was not the solution, but thanks fo RL suggestion.   support technique level 2 indicated that there is a problem with some of the T520 newest which will be fixed in an update of the firmware soon arrived.   In the meantime, they recommend a hard reset.

• BlackBerry Z10 unable to connect to my internet service providers

  Hello

  It's my story with my new Z10 camera:

  I bought a unlocked BB Z10. After that I went home, had a micro SIM so I just skipped this step. I was playing around with my camera and after that I found the update option in the settings I have improved the device to the 10.2.1.1925 OS version and the version of the 10.2.1.537 software.

  The second day I went to my cell phone provider (Orange Romania) and got a new SIM card for my device. "After a few days, I noticed that in the installer-> networks and connections-> Mobile network, there is a warning message:"the SIM card is not compatible"and the selected connection is said: orange 3 g - only voice".

   

  

  No matter if I chose manual or auto selection mod, I only got the voice without internet option option.

  After asking orange.ro forums support, I got the answer that I might have a faulty SIM card or my phone is locked on the other provider. My phone is unlocked, as you can see below:
  

  

  I went the orange shop the next day and asked for a replacement SIM card. After the installation of the new SIM, nothing has changed.

  I'm a little desperate, everything works, vocal, internet calls over wifi, but not the internet of my cell phone provider.

  Help, please

  Thank you

  That looks like a thing of network for me. The SIM card is limited by the way it is implemented in the system and it seems that yours might only have voice. I really call your provider and handed them to zero and all check. Sometimes, even if she says that you have this or that, he actually maybe not here. It happened to me in my work several times before. Plan said data are there, the paperwork said it has been activated, but nothing works. Only after I asked a network reset/re-provision begins all this work.

• BlackBerry Z10 unable to sign into the account of BBM

  Hello

  I bought this phone is a few days, im unable to sign in the BBM account, username and password are correct
  It gives a date error not set, although it is
  concerning

  Reset factory... problem solved.
  Thank you

• Compaq presario c700-c795tu: unable to connect to the WiFi network with WPA2 encryption

  Hi team,

  I tried all the options in your post and I am still unable to connect to WiFi with WPA2-PSK encryption.

  I am currently using the adapter network driver atheros 5007 wireless.

  Some of the links in your message that resolved this issue earlier are currently unavailable.

  It would be great if you could help me to solve this issue.

  Concerning

  Roger

  Here is the patch for WPA2 for XP SP2...

  Install and reboot and then see if you're OK...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1974

  That's the only reason why I can think that now prevents you from being able to connect on a network with WPA2 Personal Security.

• Unable to connect to the NAS network via a wired connection?

  Hi all

  I have 2 network NAS. They are both a Bay D-Link ShareCenter 2. One is full of media I use for streaming and the other is used to keep backups of my computers and some software. Both of the NAS are configured in RAID mirror. They both worked fine when I got them almost a year ago, they are mapped to letters pilot Y and Z. 2 days when I logged my office a popup notification came to say.
  "cannot reconnect to all network drives, click here to check the status of your network drives."
  so I checked it status and he said they were offline. I restarted my computer and both the NAS, but it made no difference. Then I tried to disconnect the drives, but when I try to reconnect to them I get this error;
  "Windows cannot access \\192.168.0.32\Volume_1\Joe, check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose. »
  When I click to diagnose it is unable to find a default.
  The next thing I did was disable my Ethernet card and connect to my network with my WiFi adapter. Then I tried to re - map the NAS is connected via the wireless. This time he allowed me to map them and they seem to work as usual via the wireless connection, but it is rather slow on the wireless.
  Then I disconnected my WiFi connection and reactivated my Ethernet card. When I tried to open the NAS I get this error message;

  "An error occurred while reconnecting Z: to \\192.168.0.32\Volume_1\Joe, Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  A friend told me that this error was because the drive letter is used by a USB storage device or remembered from a previous session, and to remedy, I should run these 2 commands CMD;
  NET use * / Delete Yes
  NET use / persistent: no
  After you run the two orders, nothing has been changed still the same problem. I also I have no USB storage device so it may be that.
  The next thing I tried was to ping both the NAS, I did this on Ethernet and WiFi connections, and both times I return a normal response both to the NAS.
  I defrosted then to restore an image from my Office I made around a week ago and I know that I don't have this problem at the time. The image I did was with Acronis. When I started on the CD of Acronis support, I discovered that Acronis software could connect both the NAS on my desktop Ethernet. After restoring I still have the same problem.
  Now, there's 1 thing I noticed, my laptop can still connect to both WiFi and Ethernet NAS with all the problems. I also have an android phone, and who can connect both of the NAS via a WiFi connection.
  1 last thing you to know is I can always get to the configuration of the NAS so pages I visit it local address in a web browser. I also ran a factory reset both the NAS and then re-applied my own settings. This does not solve the problem, and more that turning March my routers.
  Please can someone help me solve this problem. I'm running a Windows 8 Pro 64 Bit operating system. If you need more information on my system spec or how I have my setup of home network please let me know.
  Thank you Joe.

  This problem has now been fixed.

  For some reason any my AVG firewall had defrosted on its own to block access to the features as well as to define its self to disable the file and printer sharing of files on the NAS share.
  So a small trick to my firewall and everything works as it should.
  Thank you Joe.

• Satellite L40 - 18Z - unable to connect to the wireless network

  Hello.

  I just bought a Satellite L40 - 18Z. I tried to connect to the internet wireless, but I get the following message: "this computer doesn't have a card installed and configured wireless network."

  When I bought it I was told that it was active wireless.

  Can anyone help?

  Hello!

  Have you checked if the hardware switch wireless on the front of the laptop is on?

  You have yellow exclamation points?
  The wireless adapter is recognized?

  Maybe you should also update the driver and/or BIOS.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye