Blue screen error on Windows 8
I got a new error on blue screen I've ever seen with Windows 8. Here's my dump files:
Joe
I'm glad you work. Shout if you need help, we never close
Tags: Windows
Similar Questions
-
Get the blue screen error saying windows has shut down to prevent damage to this computer
My sons computer is BLUE with a message saying that windows was arrested for not to damage your computer. And it is stuck on that screen. Do you know why windows shuts down his computer?
* original title - my son computer is blue and a message indicating that windows has stopped to avoid damaging his computer. And he is not able to do anything. Do you know what it is? *
Hello
1. what operating system is installed on his computer?
2 did you the hardware changes to his computer before the question?Perform the steps in the article and see if the problem is resolved or not.Resolve stop (blue screen) error in Windows 7
Also check the event viewer for error logs
What are the information contained in the logs of the event (Event Viewer)?
-
Hello
I have a desktop running Windows 7 Ultimate 64 Bit Operating System with Kingston Hyperx 8 GB DDR3 1600 MHz RAM, Intel 4th generation I5 processor 4670 3.80 GHz, Intel Desktop Board DH87RL, 2 x Western Digital 1 TB hard drive 7200 RPM, Sapphire Readon HD 6670 1 GB DDR5 graphics, Seasonic x series 650W power supply, adapter Tp-Link TL-WN422G wireless.
Problem - every day 2 or 3 times a day I get a blue screen error NETIO. SYS System_service_exception. Below, I am paste all of the content of the DMP file. Please check and tell the problem as soon as possbile. I checked it by replacing the windows several times even in windows 8 and 10... I get the same error on blue screen.
Link - DMP FILE
Thank you very much... It has been 2 days, I disabled just driver WPF in Adguard and since I did not face any type of blue error screen. : )
-
blue screen error in windows server 2003 small business, failure of page in non paged area
error on a blue screen in windows 2003 small business server, fault_ page_ zone not paged_
Hello
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads
-
Pavilion m9340f crashes with a blue screen error. Windows 7 Ultimate 64
Running Windows 7 on my computer of Pavilion m9340f, I lived occasional crashes 'blue screen '. To try to solve the problem, I inserted carelessly the original Windows 7 DVD in the drive of the computer, thought could be used to repair the problem, or "reboot" of the software. What has resulted, it was that the newly installed Windows 7 was found to be "not a copy genuine Windows" and would not allow me to use the features of the operating system. I was then told to format the hard drive of my computer, I did, and I did a clean install of Windows 7 Ultimate, which now has been accepted as authentic. Initially, the computer seems to work normally, but BlueScreen crashes became more frequent, occurring almost every time I used the computer. I run HP Diagnostics that shows no problem. I have eliminated most of the software programs that could cause a conflict. I am running, currently: Norton 360 first Edition, Microsoft Word 2010 and Google Chrome - one of them could be the cause of the conflict? Please advise on possible solutions. Thank you!
Steve N.
Hi Steve,.
Try to delete (see below) everything except a strip of Ram in the computer and then see if it will work normally. If this is the case, add another stick in and try again - as soon as the blue screen events happen, you will know that the last stick of ram you have installed is the problem.
If the PC bluescreens yet with one stick of RAM, try the same stick, but in a different location - if it works OK now, this may indicate that the location of memory has failed. If there's some bluescreens, remove the Ram and try the process above with a different memory module.
Guide for the addition or deletion of Ram.
Let me know the result of this.
Kind regards
DP - K
-
After installing windows, there are a lot of blue screen errors
Hello
I just installed windows 7 ultimate. I've had computer problems for quite some time now. I tried a new operating system and I always get blue screen errors. These mistakes will be due to the lack of drivers (I have only installed 2 and everything that has been installed in the Service pack 1) or the malfunctioning of the equipment. Could you analyze these dump files and get back to me?Running on Windows 7 ultimate, 64-bit OS
Toshiba with Intel processorCrash dump files are:
http://rapidshare.com/files/1143482600/051213-32619-01.dmp%20-%20Shortcut.zip
http://rapidshare.com/files/2723057529/051213-39437-01.dmp%20-%20Shortcut%20 (2) .zip
http://rapidshare.com/files/1294305945/051213-39437-01.dmp%20-%20Shortcut.zip
http://rapidshare.com/files/1739676114/051213-21918-01.dmp%20-%20Shortcut%20 (2) .zipHello
Thanks for posting your query in Microsoft Community!
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
Use SkyDrive download collected files and post screen shot/image
-
Blue screen error 0x0000001E on Windows 7 Professional
Firma problema:
Problem event name: BlueScreen
SO version: 6.1.7601.2.1.0.768.3
Locali impostazioni ID: 1040Further information sul problema:
BCCode: e1
BCP1: FFFFF80003375610
BCP2: 0000000000000002
BCP3: FFFFFA8008AB20E0
BCP4: FFFFFA8008AB20E0
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1Problem on Acer laptop with Windows 7 teacher ITA
Hello
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot BlueScreens - answers top 3 (+ 1 more).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65============================================================
BCCode: 1st 0x0000001E
Remove ALL power and reinstall all the memory cards and cables (both ends when)
possible) - in fact, remove and replace - do not just tight. This is for a PC and on all
that can be done for a laptop is reinstall the memory and clear the vents. Make sure the BIOS.
low level chipset drivers and key device drivers are all up to date by check manually to the
manufacturer websites.Bluescreens many are caused by the BIOS, drivers from the chipset level low and other main device drivers
that are not the latest, even if the computer is new. Manually check for updates
using the methods of updates as indicated in the resolution of the problems above and/or the
methods below (which are the same).
BCCode: 1st 0x0000001E
KMODE_EXCEPTION_NOT_HANDLED bug control has a value of 0x0000001E. This indicates that a kernel-mode program generated an exception which did not catch the error handler.Important info if you received a STOP Code
If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.
If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
These actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
KMODE_EXCEPTION_NOT_HANDLED parameters
The following settings are displayed on the blue screen.
Cause
It is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes include:
- 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT
An unaligned data reference was encountered.
- 0 X 80000003: STATUS_BREAKPOINT
A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
- 0XC0000005: STATUS_ACCESS_VIOLATION
A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)
For a complete list of exception codes, see the ntstatus.h file located in the directory of the Windows Driver Kit inc.
Resolution
If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .
In case of exception code 0 x 80000002, the trap frame will provide additional information.
If you don't know the specific cause of the exception, the following should be considered:
Hardware incompatibility. First of all, make sure that all new equipment installed is compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.
Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.
To get a stack trace, if the normal battery monitoring procedures don'tUse the command Ko (display Stack Backtrace) to display the parameters from the stack trace. Look for the call to NT! PspUnhandledExceptionInSystemThread. (If this function is not listed, see the note below.)
- The first parameter of NT! PspUnhandledExceptionInSystemThread is a pointer to a structure that contains pointers to an except statement:Copytypedef struct _EXCEPTION_POINTERS {PEXCEPTION_RECORD ExceptionRecord; PCONTEXT ContextRecord; } EXCEPTION_POINTERS, * PEXCEPTION_POINTERS; ULONG PspUnhandledExceptionInSystemThread (IN PEXCEPTION_POINTERS ExceptionPointers)
Use the command dd (display memory) to this address to view the data.
The first value retrieved is an exception record and the second is a context record. Use the command .exr (display Exception record) and the command .cxr (display context record) with these two values as arguments, respectively.
After running the .cxr command, use the kb command to display a stack trace which is based on the registration context information. This stack trace indicates the call stack where the unhandled exception occurred.
-
Need help, my computer hangs at this message
Windows 7, get this blue screen error message, what should I do to remedy? C:\Windows\Minidump\100312-29827-01.dmp
Hello
1. when exactly do you get this error message?
2 are you able to start in the Office?
3 have there been recent changes to the computer before the show?
I suggest you try the steps mentioned below and check if it helps.
Method 1: Start your system in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 3: Resolve stop (blue screen) errors in Windows 7: http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7
Hope this information is useful.
-
System unexpectedly stop restart and go to the blue screen "error code 0141.
Original title: error code
my lap top is suddenly happened to bluescreen, shut down and then after reboot, one, (error code 0141), appears. can you please tell me how to fix this?
Hello
Thank you to contact the community Microsoft and we will be happy to help you with your concern.
According to the description, it looks like you have a problem with Windows Vista, getting automatically restart with a blue screen.
He would be grateful if you can answer this question in order to help you further.
1. have you made changes on the computer before this problem?
2 what happens while accessing any special request or programs?I suggest you to check the information contained in the event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
Perform a clean startup will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.
How to solve the problem by running the clean boot in Windows vista: http://support.microsoft.com/kb/929135
Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.
I suggest you to see the steps in the following Microsoft article and check if it helps.
How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly: http://support.microsoft.com/kb/958233
Resolve stop (blue screen) errors in Windows 7 (similar to a few steps of the mentioned below, the section applies to windows vista): http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7
Notes:
When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
Before you perform the upgrade installation, I recommend you back up your files using windows backup.
We would be more than happy to help you if the steps above did not solve the problem.
-
Help? Computer stops, managed Kernel_Mode_Exception_Not blue screen error message
My computer shuts down when I start it in the morning. I get the following error message KERNEL_MODE_EXCEPTION_NOT HANDLED with 0x10000008e and 0x5dd2952d error code and driver-induced Win32k.sys can someone please help? I tried restoring it does not work. I checked the memory without errors. Only checked the material no error. I have not recently installed the new drivers. What is a Microsoft update that is causing the problem?
Thanks for any help.
Hello
Thank you for writing to Microsoft Communities. I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.
1. are you able to boot into Normal mode?
I suggest to follow the steps provided and check if it helps.
Method 1:
Step 1: I suggest to disconnect all external devices other than the keyboard and mouse, then check if you receive the same error.
If you receive, I suggest you follow step 2.
Method 2:
Step 1: Try to start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeStep 2: If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
http://support.Microsoft.com/kb/929135
Note: After the troubleshooting steps, see step 3 of the binding of boot is a way of putting your computer to normal startup mode.
Method 3: Also, try the steps in the following Microsoft article and check if it helps.
Resolve stop (blue screen) error in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
For reference:
Bug Check 0x1000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M: http://msdn.Microsoft.com/en-us/library/ff557203%28V=vs.85%29.aspx
I hope it helps. If you have problems in the future, please let us know. We will be happy to help you
-
Hi all and I want to thank you in advance
I get this non-stop error and my computer stops and restarts all the hours
and that's the exact blue screen. I checked against viruses and malware and my laptop is clean, so I don't know what else to do
Thanks in advance :)Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 4105More information about the problem:
BCCode: c5
BCP1: 00000000
BCP2: 00000002
BCP3: 00000000
BCP4: 828EC4A2
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\Mini011012-01.dmp
C:\Users\Shima\AppData\Local\Temp\WER-62915-0.SysData.XML
C:\Users\Shima\AppData\Local\Temp\WERD0A6.tmp.version.txtHello
See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot BlueScreens - answers top 3 (+ 1 more).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65====================================================================
BCCode: C5 0x000000C5
This error is most often a driver, thinks the video and other BIOS. Antivirus/antispyware/security
programs are also suspected.BCCode: C5 0x000000C5
Bug Check 0xC5: DRIVER_CORRUPTED_EXPOOL
Value of 0x000000C5 DRIVER_CORRUPTED_EXPOOL bug control a. This indicates that the system attempted to access invalid memory at IRQL level too high.
Important information if you have received a STOP Code
If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.
If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
The following actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
DRIVER_CORRUPTED_EXPOOL parameters
The following settings are displayed on the blue screen.
Parameter Description 1
Memory referenced
2
IRQL at time of reference
3
0: Read
1: To write
4
Memory address
Cause
The kernel attempted to access pageable memory (or may be completely invalid memory) when the IRQL was too high. The ultimate cause of this problem is almost certainly a driver that has damaged the system pool.
In most cases, this bug results if checking a driver corrupts a small amount (less than PAGE_SIZE). Allowances cause more bug check 0xD0 (DRIVER_CORRUPTED_MMPOOL).
Resolution
If you have recently installed new software, check if it is properly installed. Check the updated drivers on the manufacturer's website.
To debug this error, use special pool of driver verifier. Failure to reveal the driver that caused the error, use the global flags utility to enable the special pool by pool tag.
BCCode: C5 0x000000C5<-- read="" this="">
* 1198.html http://www.faultwire.com/solutions-fatal_error/A-Device-Driver-has-pool-0x000000c5-==============================================================
Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMYou can disable the driver verifier
http://support.Microsoft.com/kb/244617Start - type in the box search-> auditor/Reset hit enter to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.If DriverVerifier creates a minidump upload it and post the link here so we can analyze.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
How can I get rid of the blue screen error?
Original title: Windows Vista Start does not
Hello
I have Windows Vista Home Premium, and I've had it for 5 years now (2006-) the problem is that I don't know what happened, but when it restarts, I have two options;Startup Startup Repair (recommended)
Start Windows normallyWhen I choose "Start Windows normally", a blue screen appears with an error message and disappears quickly, leading me to restart my Vista again. However, when I select Launch Startup Repair tool, it takes a while and after a bit, it ask if I want to send the error to microsoft (recommended) and I choose Yes, and it takes a little more time to look for a solution. Finally, a list of appropriate actions appear;
Startup Repair; I tried this 8 times now, and he cannot find a solution, leading me to reboot once more.
System restore; I tried ALL the dates of the restoration, and none of them worked. I got an error saying: it cannot restore.
Restore the computer; 1. I don't have a backup drive (it's a shame, I know) and 2. I don't want back up and lose all my files.
Windows Memory Diagnostic tools; I checked all hardware error, and none have been found.
Command prompt; I don't know what to do with it.If someone can PLEASE help me, I would be VERY grateful. I have very old memories and photos on this computer and I don't want to lose these. I am begging for someone to help me, and my last priority would be to forget all these photos and files and move: (.) Oh and I tried running safe mode, by pressing F8 while the computer restarts and I've highlighted Mode safe mode with networking, but it gives a quick overview of a blue screen just and hangs on reboot. Please help me on the procedure to follow for the good of my IMPORTANT files and memories.
Thank you, in advance.
Hi AffanX,
Method 1: Try to disable automatic reboot in the menu start-up advanced options, and then try to capture the blue screen error message, see the link below:
Advanced-Startup-options-including-safe-mode
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Method 2: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.
If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.
After disconnecting all external devices, run the Startup Repair
Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
http://support.Microsoft.com/kb/934540You can see the steps below for more information
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
(Article above applies to Windows Vista)
-
The other day I noticed that I had a virus that was redirecting my searches on Google to scour.com. I used my anti-virus installed (PC-Cillin) and downloaded Malware Bytes removed the virus. Since then, my computer always gives me the blue screen of death once it starts. Startup of Windows and the programs that are supposed to start start to leave, but after a few minutes I STILL get the blue screen of death, and I'm getting various messages including IRQL_NOT_LESS_OR_EQUAL (no driver is listed), I also gottene PAGE_FAULT_IN_NONPAGED_AREA; It seems to be a different problem each time. What is going on? I still have a virus or something?I tried the system restore, does not solve the problem. When I try to change the registry through the command prompt in safe mode to copy the \RegBack\ file beforehand, I get a "sharing violation". How can I fix the registry through safe mode?
Hello
To check again if the problem is caused by a Virus/Malware on the system, I suggest to refer to the link below and run the Windows Live OneCare safety scanner and check if the problem is caused by an Infection of Virus/Malware on the system
To run the scanner Windows Live OneCare refer to the link below
http://OneCare.live.com/site/en-us/default.htm
The Blue Screen of Death occurs when Windows encounters a critical problem which it can't get out without stop to stop operations after posting the diagnosis of the problem in the form of the Blue error screen.
Follow the steps below to solve the problem with the blue screen of death.
Method 1:
Try to access your computer in safe mode and follow the steps below. You can start safe mode and then try to repair the registry.
To start your system in safe mode follow the article below:
Start your computer in safe mode
Note:
Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
Method2:
Step 1:
Try to perform the clean boot in safe mode and check if the problem persists:
To perform the clean boot follow the article below:
Note:
After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.Step 2:
Also try to perform the material clean boot when you start return to normal mode. To perform the starting material in minimum mode follow the steps below:
You can try to perform a clean boot material and check if the problem is caused due to all the equipment connected to the computer.
To perform the material clean boot, follow the steps below:
(a) disconnect all external devices.
(b) start the system in safe mode.
(c) go to Device Manager
Device that can be disabled to perform a clean boot material are
· Video cards.
· Sound card.
· Network card.
· USB devices and controller
· CD\DVD.
· Modems.
· Ports (series and parallel)
After doing this, if you are able to Start in Normal Mode, try to activate the device one by one and find out which device is causing the problem. Try to install the latest driver for this device, or contact the vendor of hardware .
Method3:
You can run the control and verification of the disc if it solves the problem:
To perform monitoring of disk check the steps outlined in the article below:
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
For more information about how to manage the blue screen error please follow the article below:
-
Blue Screen Error MODULE_NAME: Ntfs
I have a few BSOD that appear from time to time and I do not understand the minidump files.
My minidumps can be found at:
https://onedrive.live.com/?ID=13511480866954F4! 135 & cid = 13511480866954F4
Any help would be appreciated. Thank you very much.
Hello.Bugcheck 1E, {ffffffffc0000005, fffff80002d7daf5, 0, ffffffffffffffff}
Probably caused by: memory_corruption (nt! MmCreateSection + 395)
Error checking 24, {fffff88002811e78, fffff880028116d0, 1904fb, fffff80002aa88de}Probably caused by: ntkrnlmp.exe (nt! CcUninitializeCacheMap + this)
Bugcheck 3B {c0000005, fffff80002a902a5, fffff88004628f40, 0}Probably caused by: ntkrnlmp.exe (nt! KiSystemServiceHandler + 7 c)Ntkrnlmp.exe is a component of Windows which mean than anything else that the leads in
Fault.BiosVersion = F10e DS
BiosReleaseDate = 01/04/2009
SystemManufacturer = DataLogic
SystemProductName = G31M-S2L
BaseBoardManufacturer is Gigabyte Technology Co., Ltd..
BaseBoardProduct = G31M-S2L1. check with Support Gigabit, their documentation and online drivers. Update the
BIOS, drivers from the chipset and drivers of major on-board and separate devices (see pilot
Update methods below). Also check for later versions at Intel and the other device
tea.Support for Gigabyte
http://www.gigabyte.com/support-downloads/technical-support.aspxGigabyte Downloads
http://www.gigabyte.com/support-Downloads/Download-Center.aspxFor the Intel driver update utility<-- run="" this="" after="" checking="" with="">
http://www.Intel.com/p/en_US/support/detect?redirector_count=1&Intel Download Center
http://Downloadcenter.Intel.com/Intel - Support
http://www.Intel.com/p/en_US/support
Intel - community and Forums
http://www.Intel.com/content/www/us/en/blogs-communities-social.html------------------------------
Avast has been executed in two events of BSOD and can cause instability.
2 uninstall Avast and running of its removal tool to avoid leftovers. MSE - free use
instead.
MSE - free
http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download3 check memory very carefully (see memory test methods below).
4 use ALL other methods in the troubleshooters below if necessary.
5 if necessary run the Driver Verifier to see if it can indicate a CAUSE (see Driver Verifier
methods below.====================================
Resolve errors stop (blue screen) under Windows 7 - has a section for them if you can
or are unable to start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7====================================
BCCode: 24 0 x 00000024
Remove ALL power and reconnect the cables (at both ends, memory and cards)
When possible) - in fact, remove and replace - do not just tight.The main cause of this Bug_Check is disk emits however it can be caused
problems of memory and same antispyware/antivirus/security programs.-----------------------------------
BCCode: 24 0 x 00000024
BCCode: 24 0 x 00000024<-- read="" this="">
http://www.faultwire.com/solutions-fatal_error/NTFS-file-system-0x00000024-* 1051.html? order = votesBug Check 0 x 24: NTFS_FILE_SYSTEM
https://msdn.Microsoft.com/en-us/library/ff557433%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396====================================
BCCode: 1st 0x0000001E
Remove ALL power and reinstall all the memory cards and cables (both ends when)
possible) - in fact, remove and replace - do not just tight. Those who are for a PC and on what is possible for a laptop is reinstall the memory and clear the vents. Make sure BIOS, drivers from the chipset of low level and main device drivers are all to date by check manually at the sites of the manufacturers.Bluescreens many are caused by the BIOS, chipset of low level drivers and other major drivers that are not the latest, even if the computer is new. Following the link manually check updates using the methods of updates as indicated in the resolution of the problems.
BCCode: 1st 0x0000001E
Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED
BCCode: 1st 0x0000001E<-- read="" this="">
* 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-Bug_Check 0x1E - read link for the example
http://msdn.Microsoft.com/en-us/library/ff557408 (v = vs. 85) .aspx====================================
BCCode: 3B 0x0000003b
Try to remove and replace all the memory cards and cables (both ends where possible)-actually delete and replace - not just in the warm (on a PC) and clean the dust bunnies and vents. On a laptop on everything that can be done is to reinstall the memory and clean the vents. (Of course remove ALL power before opening the case).
BCCode: 3B 0x0000003b<-- read="" this="">
http://www.faultwire.com/solutions-fatal_error/system-service-exception-0x0000003B-* 1074.htmlBug Check 0x3B: SYSTEM_SERVICE_EXCEPTION<-- read="" this="">
https://msdn.Microsoft.com/en-us/library/ff558949%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396====================================
Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpYou can disable the driver verifier
http://support.Microsoft.com/kb/244617Start - type in the box search-> auditor/Reset hit enter to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with MyEventViewer when the blue screen.
If DriverVerifier creates a minidump download the and provide a link to it, then we can analyze it.
----------------------------------------------------------
References to Vista also apply to Windows 7.
It's my generic how updates of appropriate driver: (look for the BIOS and driver
updates.)This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
for the drivers Microsoft hide - updated those without drain in their names. (Also updated
the BIOS and chipset drivers.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd partywith their own software and drivers and other major device drivers, you have.
Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to turn off the pilot facilities in Windows updates, that leaves is to Windows Update, but it will not install the drivers who are generally older and cause problems. If updates offers a new driver and then hide it (right click on it), then go get new ones manually if you wish.
How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967
==========================================Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.orgFor the Windows Memory Diagnostic tool.
Start - type in the search-> memory box - find top - right click - Memory Diagnostics tool follow RUN AS ADMIN instructions
Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.htmlI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it=""> -
Blue screen error crash, caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys
original title: Blue error screen, accident of death caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys
I currently own an Aura of Alienware Dell, it's an amazing computer. The only problem is that I had a lot of problems, I was able to permanently fix all except this issue. I'll randomly crash blue screen, usually it doesn't happen often and it is normally not triggered by something specific, rarely it will crash at startup. I was able to download an application that can read the cache/dump blue screen crashes:
34 accidents
one was caused by Wdf01000.sys
three was a result of tcpip.sys
and all the rest of ntoskrnl.exe
I don't know what caused it, I've had this computer for about a year now and I've never had this problem before. I don't remember an update of the cause, or by downloading any strange apps, downloads or viruses. (I had wiped my computer about 3 months ago)
I don't know too much about software,
Any help is appreciated.
Hi bloo532,
1. what application did you use to read dump files?
2. did you of recent changes on the computer?
It resembles that of the driver on the computer is causing the blue screen.
Check if the problem persists in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Restart the computer to return to normal mode
Also make sure that all drivers are up to date on the computer.
See the link below and try them the steps mentioned, check if it helps.
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
If the previous step fails, then you will need to provide the minidump files.
Use SkyDrive download collected files and after shot/screenshot.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Note This procedure assumes that you can locate NT! PspUnhandledExceptionInSystemThread. However, in some cases (for example an access violation crash) you will not be able to do. In this case, to look ntoskrnl! KiDispatchException. The third parameter passed to this function is a trap frame address. Use .trap (trap Display frame) with this address to define the context of registry to the correct value. You can then perform the stack traces, issue other commands.
BCCode: 1st 0x0000001E<-- read="" this="">
* 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-
=========================================================
Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617
How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html
Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx
How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver
Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html
Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php
How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM
You can disable the driver verifier
http://support.Microsoft.com/kb/244617
Start - type in the box search-> auditor/Reset hit enter to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.
If DriverVerifier creates a minidump download the and provide a link to it, then we can analyze it.
----------------------------------------------------------
References to Vista also apply to Windows 7.
It's my generic how updates of appropriate driver: (main drivers and BIOS)
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.
Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.
Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html
If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
Then, get new ones manually if you wish.
Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/
How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/
==========================================
Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.
To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org
For the Windows Memory Diagnostic tool.
Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructions
Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/
How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
Maybe you are looking for
-
I have a Apple Watch sport, version 2.2.2 and when trying to check the updates, I get a screen saying "unable to connect to watch." The airport was turned off, watch was on charger and 1 foot from the iPhone. A fitness application, I want to get requ
-
"Firefox has prevented re direction to another page" How can I CANCEL it?
This happens fairly regularly to various web sites. I can't find the preference of re - configure.
-
Second drive HARD HP DV8 1110ea problem
Hello Recently I spilled coffee on my laptop and two of my (2x320GB) HARD drives has been cut. I bought 2 new (1xSSD 120 GB + 500GB 1xHDD) and the thing is that if I put the two of them (SSD as primary) and HDD as secondary HARD drive is not detected
-
Properties of the Start Menu and task bar
In the tab Area of Notification of the bar of tasks and properties of the Start Menu window, under "system icons" it allows me to select which system icons I want to always show, such as; Clock, Volume, powerand there is a check box for the network,
-
CQ62-410US stuck with "Several monitor - Clone View" and VGA port does not
Hello! I have a Compaq CQ62-410US computer laptop with an Intel GMA 4500 M (onboard) video card and a port output VGA, Windows 7 x 64 operating system. A few weeks back the screen was broken (kick straight punch of a child) and nothing could be trans