Blues VLAN with Essentials more...

Similar Questions

• The upgrade to vsphere 4 essentials for vsphere 4.1 essentials more with 2 servers?

  I currently have a Dell 2950 III with processors x 5460 double hearts running vsphere 4 essentials and I am looking at upgrading on two servers with vsphere 4 essentials more with vmotion. How do I know if I can continue to use my existing 2950 and add a Dell R610 with two hexagonal x 5680 core processors? I want to be able to run most of my guests on the new R610 but power move them back to the 2950 (which could be changed during the upgrade) and if necessary R610.

  Thank you.

  The only concern, you'll need to know is the processors for R710, R610, and PE 2950. You must ensure that enhanced Vmotion is supported for these inorder to three servers for vmotion (live migration) seamlessly.

  I know R610 and R710 works, but I'm not sure what that generate a PE2950 you are referring. You can see the matrix here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003212 an another prereq is that all of these VMs must be in the shared storage and the shared storage is presented to all these 3 hosts.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• Blue circle with a white cross on the search results

  What is a blue circle with a white cross attached medium while searching for a contact that is not in my contact list?

  [The update by the moderator topic title should be more descriptive. [Original topic title was: "Contact"]

  If I click on the (+) sign this person will know that I added to the Contact list? A message will go to this person saying added to my Contact list? The person twice if do research with (?) the other with (+).

• WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

  While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

  Hello

  Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

  Readers on the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  1 TB laptop hard drive.

  The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

  About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Satellite A350 - blue screen with error message

  At the start of windows7, I get a blue screen with error message 0 x 0000116.

  Can someone help please?

  It looks like a graphics driver is a troublemaker. Try to reinstall a graphics driver in SafeMode (f8 at startup). Read this article for more information:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/eb584685-6b8b-4ad7-B6CC-ae5ee78095fb

  It is for VISTA but should be the same for win 7 too.

• What would cause a SQL server to blue screen with FFFFF81001BA5198 code

  What would cause a SQL server to blue screen with FFFFF81001BA5198 code

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Blue screen with stop: 0 x 00000024 (0x84598f58, 0x84598c54, 0x001904aa, 0x8561df51)

  * Original title: I need help please

  I was given an old computer model of ky x n bc laws all im going to do is to type using office 2000... and it worked in food for 5 minutes now, I have a blue screen with stop: 0 x 00000024 (0x84598f58, 0x84598c54, 0x001904aa, 0x8561df51) in my research I found, it seems that I need a recovery disk for this computer did not come with a how can I do to get a... im also secretly hoping that it costs no stupid amounts of money since I'm on a fixed income... Thanks for your help guys o btw, I tried f8 it will o do now and then appears on the blue screen and f11 does not work

  Hello

  Repair and reinstall the information:

  Try a startup repair and / or a system restore using a Microsoft Vista DVD (to borrow a)

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can contact your computer manufacturer and ask them to send you a set of recovery disks to reinstall.

  Most manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Blue screen with * Malfunction__Call Hardware put an end to your supplier of material for pension * system *.

  I have a laptop Dell M1330 which is about 3 years old. This problem has happened several times and I was generally able to reboot to make it work for a short period.  I tried to change the RAM and that did not help.

  Now, after the last blue screen with * hardware malfunction call your hardware support vendor * the system stopped * error - the laptop even activate no more.  Is no longer under warranty.

  How can I fix - bearing electronic Fry would be reasonable?  The cost would be prohibitive for that I'm better of just buying a new laptop?

  Thanks for the advice of someone.

  If the power, you get nothing on your splash screen (Dell Logo, setting the Bios for the press, etc.), seems to be hardware related.

  As for that, I would only guess from here.

  If you go anywhere, take to choose a reputable local computer repair shop, not a chain of stores type of configuration.

  Someone else here may have a better idea for you, as to what is wrong.

  See you soon.

  Mick Murphy - Microsoft partner

• Discs Blu - Ray are not more recognized in Windows 7

  Hello

  I have 2 laptops with internal blu - ray, who never stopped recognizing Blu - Ray discs. I live in the United Kingdom

  A Blu - Ray drive is an Optiarc, the other a LG - PC with the Optiarc has Win 7 64 bit Ultimate and the brand-new PC with the LG drive has Win 7 64-bit Home Premium edition. Both drives are listed in the compatibility list - and were shipped preloaded with Win7.

  They both played Blu - Ray discs in the past, but it is even more recognize them in the drive.

  I ran Diagnostics from CD/DVD drive suggested in other similar topics, but the reader does not recognize the disks, it cannot solve the problem.

  I uninstalled and reinstalled several times readers in Device Manager.

  I also tried the fix involving the upper and lower filter removal in a registry key, also without success.

  I tried to change AHCPI to AHT in my bios - my bios has no AHT, just AHCPI and IDE

  I've installed, uninstalled, and reinstalled several different Blu - Ray software Acer Arcade, PowerDVD, TMT MediaTheatre Total, Slysoft AnyDVD HD and others. None no longer works.

  I even restored the two default factory machines and reloaded drivers manufacturer - no luck.

  The manufacturer, Acer, has even replaced one of the machines - when he arrived, he played all my blu - ray discs. After only a couple of windows update, it doesn't even recognize the discs.

  As you can imagine, I am at a loss on how to fix it.

  I noticed that the driver is installed when the hardware is detected is a Microsoft driver since 1996 - would this work with Blu Rays? No disc manufacturer provides a different driver, and update driver is the correct driver.

  The compatibility list says that Blu - Ray discs should work with the default drivers installed

  I'm quite proficient with PC hardware, after fixing computers for 21 years, but this question has me - and thousands like me on the web - absolutely perplexed. It seems to affect any player Blu Ray with Win 7 installed.

  Please can you help me

  Thanks in advance,

  SoC

  Hello

  Be sure to communicate with decision-makers readers as it is a known problem if it occurs regularly
  with Windows 7. Also keep in touch with Acer for the same reasons - is planning to ask ALL those
  for updates of the firmware.

  Is it possible that you install the same software on the two computer such as antivirus/antispyware.
  security programs or even a CD/DVD player and burn programs or others that may be causing
  the problem?

  If you are sure that it's an update, you can try to remove the update or even re - install Windows 7 and
  block the installation of updates so you can enable them one at a time.

  If you get it working brand a Restore Point immediately make one before installing a
  programs (before each major) and before you add updates.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  How to uninstall a Windows Update in Windows 7
  http://www.SevenForums.com/tutorials/24373-Windows-update-uninstall-update.html

  How to hide or restore the updates of Windows hidden in Windows 7
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  ===============================================================

  Perhaps a repair install might help:

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ===============================================================

  You've done most of them however this is my usual convenience store just in case.

  The DVD player does not work after I installed Windows 7 - here are the different readers from Sony
  However the same issue could have an impact on your drive.
  http://support.Microsoft.com/kb/975270/

  -----------------------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Crash blue screen with error 1gdpmd64.sys

  I have a Pavilion dv7-6b78us laptop.  He started to crash to a blue screen with an error 1gdpmd64.sys.  I tried just reboot and it hangs just still a little later after use.  I searched the web and found a site that recommended upgrading the graphics drivers and chipset.  I did and it still broke to blue screen after a short use.

  I decided to do a system restore then after performing a backup.  The restoration went well past (disk formatted and reinstalled to restore a minimum of software.)  I then reinstalled all the upgrades of Microsoft (with the exception of IE 11) and then installed Norton Security Suite.  I then installed Microsoft Office & Student 2007.

  I fell for the same system error blue screen again.  Is it time to tight teeth and get a new hard drive?

  Thank you.

  Finally, I did a restore to the factory settings that formats the c: / partition and reinstall the PC to factory settings and original software.  I then reinstalling all other software.  So far so good.  I did most of the upgrade of Microsoft (there are more than 130 of them) and that is brought back up to 10.  However, I see there are updates more that need to be installed, so maybe I have have not yet hit bad.  I think I'll install the rest one at a time and see what happens.  Perhaps in this way I know that we're causing problems.

  Have you tried upgrading your graphics and chipset drivers?

• Im having problems with the crop tool (r).  No gridlines to help straigthen and a blue screen with a white cross may appear.  Suggestions for change that?

  When I first downloaded and used LIghtroom testing, it was fine.  Now, when you press 'R' guidelines usual third are not displayed.  When you want to straighten a picture usually find the grid lines, but now they do not have.

  Also, after using the tool of R twice more high on most of the images, it changes just a blue screen with white triangles on it and then I can not crop or straighten anything.  Very strange.

  I used Lightroom for many years, but it's strange and I can't change it back.  I watched all I can think about and I don't know why he changed.

  Any help would be welcome.  It is testing at the moment and I won't buy it until I can work on what's happened.

  Thank you, Karen

  Reach:

  Edit > preferences > Performance

  Lightroom > preferences > Performance (on Mac OSX)

  Disable the GPU acceleration.

  For Windows, you should go to the website of the manufacturer of your graphics processor and check the driver updates. Once updated you can try turning on GPU acceleration, otherwise leave this option disabled.

  Mac GPU, updates occur with updates to the OS.

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-GPU-FAQ.html

• Blue square with a question mark instead of a picture

  I'm on Messages to use with your Mac - Apple Support.

  Instead of pictures (or), I get a blue square with a question mark in it.

  This does not happen with all Web sites, but I wonder why it's happening with an Apple site, and how I can see the photos.

  It sounds like a broken image link.

  Post a screenshot if you can, so that we can confirm. The page seems OK after a glance. Command + shift + 4 then do slide on the affected area, add the image to the desktop to this site via the camera icon.

  If you have browser extensions, disable them and repeat the test. Also try a different web browser if possible to see if it is the scale of the system or only Safari. Is - this Safari you use?

• MacBook Pro screen displays a blue screen with the vertical line

  Hi, I have a problem with my macbookpro. When I try to start, the gray screen load with the apple logo and then turn to blue screen with vertical crosshairs.

  It would be useful that you mentioned EXACT model/year of your MBP and the current OSX.

  Ciao.

• Toshiba 32P2400EE - blue screen with message mono

  I have a toshiba tv LED serial number 32P2400EE. Accidentally when you press a button on the remote, it shows only a blue screen with a message of mono on the upper left.

  Please provide assistance.

  Hallo

  Have you tried to resolve your TV back to factory settings?