BlueScreen on new Pc

Similar Questions

• Freezes and bluescreens on new PC on Windows 7 and Windows 8.1

  I recently upgraded my PC and everything is new (built on components). But since I installed windows 7, I was getting freezes and also the random bluescreens (one of them was with "PAGE_FAULT_IN_NONPAGEG_AREA"). I talked to someone and that person told me that maybe it's because of drivers (because all components are new on the market - i7 5830 k, Nvidia gtx 970, ASRock x99x killer etc.). So I upgraded my windows to windows 8.1. It is true is run faster, but still freezes. Also, I paid attention when these things were underway and above all, I have when watching a movie or something (both on Windows media player or another third-party video player). First I thought it of because I've been using 2 monitors, but even after I removed 1 problems persist. Maybe it's a problem of compatibility or what would be - it, because I'm bored enough to restart my computer everytime.

  UPDATE: I just got a gel again while the PC was nothing at all (I was in the kitchen and when I came back and moved the mouse to stop the screensaver, to raise my monitor, nothing happened). Also, I forgot to mention, when I restart the PC button after a freeze it restarts more difficult (I mean it is more difficult)

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You need not run memtest again unless you want to.
  

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  
  

• I have a new machine and suffered events periodicals bluescreen.

  Separated from this thread.

  I have a new machine and suffered events periodicals bluescreen. I tried to diagnose the problem myself using different jumpers and a UBCD disk that contains several tests, but without success.

  I will try to follow the directions above myself, but is there a reason why I can't send the minidump and the system directly the files of information for you. RapidShare is no longer active and I'm unable to sync my phone and my computer to play Google and "A player" and another program sharing, I tried looking for an e-mail address for you who still once, made me wonder why such a detour should be used.

  Thank you. I would appreciate your help.

  Rob

  Instead of scoring on a subject old 3 year that cannot be sought after more you should start a new topic about your problem and to do that at the top of the screen click on participate, ask a question and fill in the information as best you can, then submit.

  Start a new topic will get to the top of the new list of issue where people will be able to help.

  ZigZag3143 has some new and improved instructions on how to provide information on blue screens of death (BSOD) to include in your new question/topic and it goes like this:

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

• new SSD HP Pavilion HPE win 7 home Premium Error: Driver_Power_State_Failure Bluescreen from 30 to 45 minutes waiting for the stop down.

  Hello all, there

  I recently installed a new SSD in a HP Pavilion HPE with windows 7 Home premium. After this event I get bluescreen Driver_Power_State_Failure after about 30-45 minutes waiting for the computer to stop. I have a minidump file if this will be useful and I would be very grateful if someone could help me solve this problem :D

  Minidump: http://www.mediafire.com/?hy7so6n9af5f73v

  I hope this helps and all support is most appreciated!

  The tihub3.sys seems to be in question:

  BUCKET_ID: X64_0x9F_3_POWER_DOWN_IMAGE_tihub3.sys

  The tihub3.sys, which is dated January 14, 2011, is a Texas Instruments USB 3.0 driver so try to update this driver by installing the next update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-108667-1&CC=UK&DLC=en&LC=en&os=4063&Product=5144370&sw_lang=

• Re: Satellite A500 - reason of the Bluescreens

  I got my laptop NEW since December, and it annoys me that the my laptop bluescreens on me at least twice a day, even when its mode 'sleep'! What is Windows 7 or BIOS problem? or the graphics card driver? That's I know are up to date...

  Frustrating your...

  Hello

  To be honest, I also don t know the reason for your problem of blue screen
  What BSOD you get exactly? You should post the exact code you see.

  In addition he s always advisable to reinstall Windows using the Toshiba recovery disc. So that you can identify if it s material or not.

• Satellite A300-20F - Bluescreen and cannot start Windows

  Hello
  I have A300-20F

  I installed a new clean vista with my spare drive because I was taking dead bluescreen errors but today I took some of them... I had installed my all drivers updated.
  now the situation is the following:

  I can not open vista. When I try to open in safe mode it gives BSOD that I do not see what are these codes. I try to open with my spare drive, but it says firstfully: "windows is loadind files" then gives me an error:

  file: windows\system32\boot\winload.exe
  Status: 0 x 0000001
  The selected entry could not be loaded because the application is missing or damaged.

  What can I do now? I can't open anything now! Show me a way please... (he gave me a lot of mistakes, so couldn't write down them)

  Hi dunkerman,

  If you can start t in Windows in safe mode I think some Windows files are corrupted or something went wrong during the installation of the driver

  You wrote that you have installed a new clean Vista with your rescue disk. This means that you have used the Toshiba Recovery disk or a normal disc of Microsoft?

  Usually, if you install Toshiba Recovery disk Windows all drivers and tools will also be installed because the disk contains a ready image of factory settings. So generally with these settings, everything should work fine then I recommend to test again with a recovery disk.

• Stellite P500 - when installing Win7 Bluescreen rises

  Hello

  relative to my: Toshiba Stellite P500 - 127 PartNo PSPG8E - 01M009GR

  Once my laptop did not start more...
  so, I tried to repair with the DVD of MS - Win7... (he did not)
  so, I tried to format c: and set up a new Win7 (it did not work - Bluescreen at different times)
  so, I bought another DVD of Win7 - ((it did not work - Bluescreen at different times)
  so, I bought another HARD drive - (it did not work - Bluescreen at different times)

  My latest idea driver - and therefore my Question: are there drivers available for my device, which only gathers in the EXE files?

  many ways
  Neo.

  Neo can I ask you something:

  You have created recovery DVD toshiba s advice?
  If Yes, have you tried to install the OS by using this original toshiba recovery image?

  I installed image recovery and the version of the Microsoft OS several times so I P500 and it is really strange that you can not install Win7 on this model of laptop.

  Try to set the BIOS to the default settings and try to install the recovery image.

  Please send comments.

• Satellite Pro A300-28V - my bluescreens disappeared when the BIOS has been upgraded

  I'm curious to know about it. The machine is a Satellite Pro A300-28V with Vista32/Win7.
  Had problems with bluescreen dumps referring to 'iaStor.sys '. I was about to send the laptop in for repair when I made this last effort to resolve the problem. Upgrade 1.9 to 2 BIOS, 1 - Win.

  All of a sudden my system image succeeded! Even at an Iomega home network HDD. Without complex!
  No blue screen exports even at startup 'cold' (after a free night)!

  For now, I leave the computer in sleep mode while I am at work. Let's see if he managed a day without landfills.

  What is the technical difference between 1.9 and 2.1 BIOS? No idea if it's something with iaStor.sys to do?

  /ssstsg

  Spelling was edited by: ssstsg

  Hi mate

  This is really good news as your BSOD displeasured after the BIOS update.
  The BIOS give instructions to the test power - on self test (POST) and provide basic information on how to manage components of the laptop, as HDD, ODD memory, that are required to load the operating system.

  Who knows, what was changed in the update but the main thing is that all the work and the update solve your BSOD

  > No idea if she has something with iaStor.sys to do?
  iaStor.sys is part of the SATA driver who is required to recognize the HARD drive using AHCI mode.

• Satellite Pro L500-1 t 5 BlueScreens and visualize disruptions

  A few days ago my laptop crashed when I he began and showed a blue screen with the code:

  0 x 0000116 (0xFFFFFA8007AF8010, 0xFFFFF88004AC3D9C, 0x0, 0,)
  0 x 0... (02) atikmdag.sys address FFFF88004AC3D9C base at FFFF88004AB1000

  After that, it was impossible to boot the operating system (Windows 7) regularly.
  The PC is very slow and had a lot of disruption in the display (some columns with horizontal stripes across the screen). Start the computer in safe mode was possible, but the disruption was still there.

  My first idea was to uninstall the graphics card (ATI Radeon 4650 Mobility) and it worked.
  I could start my OS normally.

  But the laptop kept crashing in a BSOD after a few hours.
  The report after it was:

  BlueScreen
  6.1.7601.2.1.0.768.3 OS version
  ID: 1031
  BCCode 116
  BCP1: FFFFFA800580A010 (in an accident later it was FFFFFA80040BB010)
  BCP2: FFFFF88004A2F7F8 (later FFFFF88004AA07F8)
  BCP3: 0... 0
  BCP4: 0... 02
  6_1_7601 OS version
  Service Pack 1_0
  Product 768_1
  Data to descripe the problem:
  C:\Windows\Minidump\010314-23602-01.dmp (bzw. 010314-22791 - 01.dmp
  C:\Users\Myame\AppData\Local\Temp\WER-79388-0.SysData.XML

  I sent it using Toshiba, January 3, but I did not answer until now. So I hope that someone here could help me.

  I tried many things (drivers update, windows update, tests of software malware and many more), but nothing really continuous working. Sometimes the disturbance disappeared for a few hours just return again. When I started a game, the laptop crashed immediately. So I suspected a lack of memory.

  I did a witch proven my computers memory memtest work perfectly and during a hardware test my hard drive seemed to work too - but I'm no expert in this. When I did a full test material (with a trial version of EVEREST) the tool always crushing when the test reaches OpenGL. I disabled my video card and the test passed. After that I could use my laptop regularly... but without a video card.

  Yesterday, everything has worked perfectly - there was no accident and no disturbance of the display. When I tried to stop the computer, I noticed, that windows wanted to install a new update for ATI Radeon Mobility 4650 (which was in fact very old). It happened several times in the last days and never did something good.

  And of course it would reactivate the dev video. So I tried to prevent it to disable the updates.
  But it does not work. Installed the WIndows update and it came to pass that he should be: that day crashed my computer, when I started it and since this time, the disruption of the display again. And this time it seems to stay... disabling the card does not help this time.

  I don't know what else to do. Does anyone have an idea?
  I suspect a problem with the drivers. But I can't install the drivers with the official Catalyst software.
  I have my Toshiba laptop for summer 2010 and never had any problems like that.

  0 x 0000116 > (0xFFFFFA8007AF8010, 0xFFFFF88004AC3D9C, 0 x 0... 0, 0 x 0... 02) atikmdag.sys address FFFF88004AC3D9C base at FFFF88004AB1000

  From my point of few graphics card is the troublemaker.
  The atikmdag.sys file that occurs in the BSOD message, belongs to the ATI driver.
  I don t think that the graphics card driver might cause this problem. If GPU driver problem, new installation or update should fix the problems. But it seems that helps too.

  This is why I think the GPU chip is malfunctioning.

  By the way: you should not send an email to Toshiba, but contact the Toshiba authorized Service Provider (ASP) in your country. Service guys are usually the first point of contact in the event of hardware problems.

• I get a Bluescreen whenever I'm trying to pair with devices

  This is the message that I received after you restart the computer:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 4105

  More information about the problem:
  BCCode: 1000007e
  BCP1: C0000005
  BCP2: 820F6B2F
  BCP3: B9CC6AE4
  BCP4: B9CC67E0
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini090509-02.dmp
  C:\Users\Javier\AppData\Local\Temp\WER-146453-0.SysData.XML
  C:\Users\Javier\AppData\Local\Temp\WER6CD5.tmp.ver sion.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  I do not use a Toshiba computer or the USB Bluetooth adapter is Toshiba, so I hope that's not the reason.

  My specs:
  AMD Phenom 9550 Quad - core 2.2 Ghz, 4 GB of ram, 32 bit OS, WinVista Home Premium

  Thanks in advance,

  JDL
  I put the computer together myself.

  > I do not use a Toshiba computer or the USB Bluetooth adapter is Toshiba, so I hope that's not the reason.
  So you n t have a Toshiba laptop?
  This forum is created for users of Toshiba

  Anyway, the BSOD could be caused by serious software or hardware problem.
  Each tool/software pre-installed could cause a BSOD
  I think that you should first check if the BSOD happen using the computer with the new OS preinstalled.
  If the BSOD happen again, then you should check the RAM modules.

• Qosmio G20 failed during the installation of SP3, now bluescreens on startup!

  Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
  Any suggestions?
  I can't restore to a date prior to the node without danger, he keeps failing?
  Please help me...

  Hello

  Have you tried booting with the CD of Microsoft WXP facilities and try to fix it?
  Sorry, but I don't see any other solution.

  A few months ago, I got a blue screen after installing the new software. I tried to do the same with the safe mode and system restore, but it has not t worked for me.
  At the end I backed up all my important data and installed new WXP.

• BlueScreen - Satellite A300

  From time to time, a blue screen appears with the following information:
  "STOP: 0 x 00000050 ' & the instructions were to remove options from memory the BIOS such as the cache & concealment.
  When I connect again, Windows provides me more information about the problem:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 3081
  More information about the problem:
  BCCode: 50
  BCP1: 9B02A000
  BCP2: 00000000
  BCP3: 89A0C958
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\041811-28579-01.dmp
  C:\Users\TOSHIBA\AppData\Local\Temp\WER-59295-0.SysData.XML

  How can I solve this problem?

  Hello

  BSOD are typical of a software or hardware problems.

  You said that this BSOD appears from time to time. This means that you can not reproduce this problem. It happens sporadically, and it is not very useful.

  I would recommend studying some more.
  Means that you must update the drivers; driver graphics card, etc.
  Check if you are using the latest version of the BIOS.
  New installation of the OS might be an option too.
  BSOD could also appear due to the faulty RAM memory.
  If the memory check should also be made

  Good luck

• Blue Screen Of Death on a new Satellite A500 - 18Q

  Hey everybody,

  I have a new Satellite A500 - 18Q, I bought last week. It works Win7x64, and all was well and good until last night, when I got my first BSOD.
  Well, my first impression was that I shouldn't react since the created conflict was perhaps punctual. But today, I got another.

  Either way, I got the message that he maybe a video hardware error. I tried solutions electronically, because on both occasions, I have pointed out the technical details of Ms.
  Please, I'm sure you understand, I very am furstrated by the situation as a whole. I would appreciate any kind of help, in order to establish the cause and a possible solution.

  Please find enclosed the details:

  ================================================== =======10/2/10 12:09am

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1032

  Additional information about the problem
  BCCode: 117
  BCP1: FFFFFA8008937010
  BCP2: FFFFF8800468D490
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1
  Bucket ID: X64_0x117_Tdr:2_IMAGE_nvlddmkm.sys
  Information about the server: a7c54607-4a75-4764-b368-36680ac6f055

  ================================================== ===================

  Description
  The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000116 (0xfffff88004c61f90, 0xffffffffc000009a, 0xfffffa8008937010, 0 x 0000000000000004). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 021010-21294-01.
  ================================================== =====================================

  and the other:

  ================================================== =====================================

  Description

  Problem event name: LiveKernelEvent

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1032

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA80047BC4E0

  BCP2: FFFFF880046CF490

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 768_1

  Bucket ID: X64_0x117_Tdr:2_IMAGE_nvlddmkm.sys

  Information about the server: f1b0c360-75f1-4ea4-b50d-5c0f9b727121

  ================================================== ====================

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1032

  Additional information about the problem
  BCCode: 116
  BCP1: FFFFFA80047BC4E0
  BCP2: FFFFF88004CA3F90
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1
  Bucket ID: Ys X64_0x116_TdrBCR:4:C000009A_Tdr:2_IMAGE_nvlddmkm.s
  Information about the server: 93159d6c-71a4-4f78-957f-b4e02772d561

  ================================================== ====================================

  Thank you much in advance. I would appreciate your contribution.

  FB.

  I googled around and found many forums where people discuss about this, and it probably has something to do with the graphics card.
  Maybe you should back up all your important data and install the operating system using recovery disc HARD (F8) option. Test a few days without having to install additional software.

  If the problem recurs, maybe you should contact the nearest Toshiba service provider and ask for help.

• Satellite A350 run Vista - FN key causes bluescreen

  Hello

  Seriously, I hope someone can help me...
  Whenever I press the "FN" key on my computer A350 satellite laptop (Windows Vista Home, SP2), there is a bluescreen error :-( I mean, it's nice to have some sort of button to bluescreen, in any case, I would need the button working again to be able to use some settings such as the brightness of the display or external display...
  Already, I've explored the Toshiba site for new keyboard driver or the shortcut key, but there's no :-(

  Also the Microsoft Homepage didn't help (maybe I just couldn't do to cross the jungle)
  What can I do? Does anyone have an idea?
  (btw, this is the error report):
  BCCode: a
  BCP1: 00000016
  BCP2: 0000001 B
  BCP3: 00000000
  BCP4: 824664BB
  OS version: 6_0_6001
  Service Pack: 2_0

  Thanks in advance!
  Toulousienne ;-)

  Hello

  Your laptop is equipped with preinstalled Vista SP2 or you have installed SP2 as well?
  What you can try is to remove the VAP (value added package) and after restarting the laptop installed the latest version you can download from Toshiba support and download page under http://eu.computers.toshiba-europe.com

  Please post the result.

• Bluescreens and satellite L670-12J slow start

  Hello
  I have a new laptop and the ends of the return policy 27 so I need quick help here.
  Got a new laptop from Amazon nearly a month ago.
  Toshiba Satellite L670-12J with 64-bit Windows. Processor i5, 4 GB memory and 500 GB hard drive.

  Since I got it, every time I turn it on it shows a black screen with a _ in the upper left corner of the screen. It takes 30 seconds to 2 minutes before it makes it to the login screen. It should not take anywhere near that for a laptop with these specs.

  In addition, there many Bluescreen. Sometimes a few times a week to 5 times a day. It's completely cause and that the computer is running any specific program when it occurs. It happened even when the laptop did nothing. I scanned it a few times with Windows and other programs, but they have never found anything.

  The blue screen remains upward on the screen for a few seconds then closes its doors until I read this.
  Even though I remember reading something like KERNEL_DATA_INPAGE_ERROR. Or something like that, but then I had a different message the next time (I think). Sometimes he says things about the MEMORY, but it is so fast that I can not read properly.

  As far as I know the latest drivers are installed and the latest version of the BIOS is installed.

  I really need your help guys and fast. Thank you.
  Ewen :)

  Hello

  After reading your ad I can't say for sure what the problem is here, but the best thing you can do is to install the OS by using the recovery disk (F8 at startup) mode or use recovery DVDs if you have created a.

  Reinstall the OS and test or two days with preinstalled OS clean and without some additional software. If the problem persists the best thing you can do is to contact the nearest service Toshiba and ask for help.

  I mean what you can do if the problem persists with the factory settings?
  Something like that shouldn't happen.