Bluetooth and the bios

Similar Questions

• How can I turn off wireless and bluetooth via the bios?

  "How to turn off the Wi - Fi in bios maps?

             

  I have a laptop Toshiba and Windows 7.

  Some specifications are necessary for me to work on a remote network. Bluetooth and Belarc test still does not work and I get the message"wireless cards must be disabled in the bios. »

  Without thread is DISABLED in the BIOS, also, I went to the network and the Internet and chose WIRELESS DISABLED ON HARD WIRED CONNECT and network cards, I DISABLED it. Also, I went to the network and sharing Center and changed the settings of the adapter to DISABLE.

  Wireless Configuration Utility > Broadcom Wireless Utility > "No currently no wireless available and active devices."

  Bluetooth is UNINSTALLED

  What else can I possibly? I would appreciate a solution.

  Thank you

  GVautour

  Hello

  Thanks for posting your query in Microsoft Community.

  You want to turn off wireless and Bluetooth via the BIOS, I suggest you ask to contact the manufacturer of the computer for that.

  Please do not hesitate to post, if you face problems with Windows in the future, we will be happy to help you.

• NB100 supplied with Bluetooth and the slot for sim card

  I wonder what model come with bluetooth and the slot for sim card,.

  The NB100? Have a look at the brochures on the Toshiba site.

• LSI Logic SCSI Ultra320 RAID Firmware and the BIOS utility. Cannot make the diskettes.

  I downloaded the pack sp29637 for Firmware LSI Logic Ultra320 SCSI RAID and the BIOS utility to my Workstation xw 8200. I'm doing a disk from the downloaded file. I runs the file, but when it tells me to put a floppy disk in the A: drive and I confirm, the window closes and the diskette is not made. Looks like the copy in the file program is corrupted.
  Does anyone have this already developed package files so I can copy them to a floppy disk?
  The files are supposed to be the following:

  Hi Sasi,

  Yes you are right. Then, I realized that I could open these files using Winzip or Winrar. I thank very you much for responding to my post.

• Satellite A60-106: Question about updating the BIOS and the BIOS Flash

  Fact the BIOS Flash update the BIOS or that requires a different file. I've updated a Satellite A60 BIOS to 1.9 but am not sure if cela flashed the BIOS as well.

  If this isn't the case, where I could get a file to Flash BIOS for satellite A60-106?

  Hello

  Sorry, but you question is a bit confusing.
  The update of the BIOS flashing the ROM module I put t know which version is installed before upgrading the BIOS, but if after the upgrade, a new version of the BIOS appears then the procedure was a success.

  The good BIOS and how to upgrade the BIOS information you will find on the page of Toshiba.

• T420s Bluetooth and the problem of the OSD (On Screen Display)

  Hello!

  I upgraded my Windows 7 32 bit to 64 bit and I have Bluetooth and OSD does not.

  I used the system update to install everything but who have still a unknown device and PCI Simple Communications Controller does not not in device maneger.

  Any idea what is the problem?

  Thank you

  T420s WAA 4174

  Run ThinkVantage System Update to make sure that all drivers are installed.

• my windows xp does not load when they are on the homepage and the bios pass

  I am running windows xp sp3 and when I turn on my computer it will not go any father than the bios and the homepage, it just keep coming back to this, I have no recovery disk, is it possible to do without if I can run a scan or even restore, thank you

  It is difficult to prescribe an exact treatment when so we know your system, however, it is a fairly common and often resolved disease easily.

  See if following the instructions in this thread gets going:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

• Original image has disappeared I think off the hard drive and the BIOS password set up does not work?

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits guess what it initially provided with?  Where can I find the UUID and what tech Department I would ask because if I have to call HP again and what other information should I have ready for them if you know? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become a big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help with more than one answer then GET AHOLD OF HP TECHNICAL TEAM. As I said, I did it.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Jason,

  Sorry to hear about your friend and your problem.  The BIOS password cannot be reset without the help of HP.  They will need some information from your PC and increase your case.  I recommend you give them a call.

  -wes

• How to get notification for Bluetooth and the event start?

  Hello

  Today, I try to compile an application bluetooth and my requirement as below

  When the user enable or disable bluetooth at this time here, that I need event, so I check this QBluetoothLocalDevice method here, I start only blletooth event, but I don't get bluetooth event so if you have any hesitate not solution reply me as soon as possible.

  Hi all

  I found the solution .

  void initBtDeviceCallBack(const int event, const char *bt_addr,
          const char *event_data) {
      if (event == BT_EVT_RADIO_INIT) {
          //bt_disc_start_inquiry(BT_INQUIRY_GIAC);
          qDebug() << "BT Device initiated from Services.....";
      } else if (event == BT_EVT_DEVICE_ADDED) {
          //qDebug() << "Remote Device Added : " << bt_addr;
      } else if (event == BT_EVT_NAME_UPDATED) {
          //qDebug() << "Remote Device Name Updated : " << event_data;
      } else if (event == BT_EVT_RADIO_SHUTDOWN) {
          qDebug() << "Bt Device shutdown from Services....";
      } else if (event == BT_EVT_DEVICE_CONNECTED) {
          qDebug() << "Bt Device Connected" << event_data;
      } else if (event == BT_EVT_DEVICE_DISCONNECTED) {
          qDebug() << "Bt Device Disconnected";
      }
  
      //qDebug() << "Device Added : " << event_data;
  }
  

• Windows cannot access and the bios options are not displayed in the bios options

  Windows cannot access the bios options are not displayed in the bios options, I don't know what the problem is. I've used the laptop and turned on and when I start windows again, there is a usb modem in the usb port (it contains the setup of windows, ubuntu, mac files). That's all that's happened with me, and I get the error in the photos. I have windows 8 x 64 and fujitsu lh532 core i5

  

  Hello

  Thanks for posting your query in Microsoft Community.

  • Why are you trying to access BIOS?

  In case you have problems with Windows 8, you can come back with more information, and we will be happy to answer your query.

  To access BIOS, we recommend that you contact your computer manufacturer help you make changes in the BIOS.

  Warning: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• XPS8700 and the BIOS or UEFI

  I have an old XPS8700 of 9 months with BIOS A08 = Win8.1 running.

  Everything seemed fine until I tried to access BIOS/UEFI.

  Boot, I see the Dell logo, but it is not an invitation to press F2 for the BIOS.  If I press F2 (or F12) nothing happens and the boot process continues at the login screen.

  Windows, PC settings, retrieval/update, UEFI/BIOS, the computer boots in the first page of the BIOS American Megatrends screen (and looks exactly as I expected) but the computer does not respond to keyboard or mouse.  The clock ticks upward, as expected, but there is no response to all keys (and I've tried them all) or with the mouse.  Decommissioning is the only option.

  This could affect all project or rather future upgrade... or to solve any problems.

  Does anyone have any suggestions?  I'm reasonably IT read and write, but beat me to it!

  It is difficult because of Fast Boot to enter the BIOS with Win 8. Way the easiest is to go for the power settings in the charms bar and click on reboot while holding down the SHIFT key. This bypasses quick start so that there is more time for press F2 during the boot.

• Apple will never allow iPhone users to connect to their Apple TV via Bluetooth, and the remote app?

  I am frustrated because I know that the iPhone can connect to any Apple TV via Bluetooth to "auto set-up" but when it comes to linking in general, apple specifically denies this functionality to users.  I would use this feature because I use my AppleTV for travelI obtained and I would make a transfer to wi - Fi password. I can access Wi - Fi without needing to put distance with me.

  Download the Remote by Apple app on your phone.

• Ubuntu 10.04 Toshiba NB550D Bluetooth and the microphone does not

  I use Ubuntu 10.04 on Toshiba NB550D. I like it. I've updated to 4 GB of RAM so... 1 GB seemed crazy to me... and I am a user of power... but not a gamer. The laptop has replaced my work computer. I have plug into my 24 "LCD at work and get beautiful HD resolutions.

  My only frustration at this stage is that the microphone and bluetooth both do not seem to work. Until someone told me that Toshiba does not support linux on this hardware... I know. However, someone at - it this work themselves? I'd love to hear about your experience.

  THX,

  Fenton

  Hi Fenton

  With regard to the Bluetooth - I think the NB550D uses a list drop-down-card Atheros WLAN and Bluetooth. Am I wrong?
  If so, there seems to be general problem getting the BT works correctly, wireless works well however.
  I filed a bug on Fedora Bugzilla regarding this problem on a R830 - uses the same module I think.
  Link: [https://bugzilla.redhat.com/show_bug.cgi?id=734369]

  Concerning firstly the mic - basics:

  -did you check the audio input settings and increase the logging level?
  -have you tried an external mic? You can for testing purposes use a headset / headphones as a microphone as they work exactly the same. You may have to shout to get any input however :)

  If the external mic works you can try to start the machine on 11.04 or maybe even a pre-release version of 11.10.
  This is to see if the MIC - the problem is resolved.
  If so, I think that a few searches on Google will provide you with a solution!

  In any case, let us know your findings, so we can help you.

  See you soon

  Tom

• Vista 64 - bit-> Bluetooth and the Evaluation Version

  I have Toshiba official material, but the driver that came with it is 32-bit and, therefore, cannot be installed on the 64-bit version of Vista.

  So I downloaded the 64-bit drivers online and found out it is nothing more than a farce trial version with no possible solution.
  Anyone found a way around this massive oversight for 64 - bit users?

  So, you have probably no Toshiba Bluetooth hardware. Check out the list below to do so for sure:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/Toshiba/compatibility-list.html

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)