Bluetooth connection for asus k55a

Similar Questions

• Bluetooth connectivity for external headphones with the iPhone 5

  My iohone5 do not brand Jabra headset connect Bluetooth. It detects it well.

  can some body advise how to solve this problem?

  You need to put the headset in pairing mode. And if the lookup table is full, you may need to do a factory reset on it all first. Time to get out the manual for the headset.

• Portege 4010 Bluetooth - connection for samsung and motorola phones probs

  I have a portege 4010 with bluetooth. I am trying to connect to our two phones - a samsung sgh-e370 (newish) and a motorola V600 (2 years). Both have BT I downloaded and installed the latest Tosh BT stack (4.0.something). Shows Device Manager four drivers of tosh in BT - all are OK. I have allowed the discovery and allow the connection on the tosh. I did the same thing on the phones. When I run the "Add new connection" Wizard on tosh, he finds two phones and they appear under the devices section in BT Manager with the names I gave them on real phones. However, neither picked up phone tosh and showed no tosh by asking the numbers of pins on the phones.

  The net result is I now two phones display in BT Manager, but if I click on is and choose use log I recover the error "connection failed".

  If I try to find the portege using the phone, the samsung it is but motorola doesn't have. I can't get the motorola to twin with the tosh - it just says "unable to pair up with the portege.

  Any help gratefully received.

  RJ

  Hello

  I don't really know what is the problem in your case, but I did this a few times with my Motorola RAZR V3 and it works fantastic. The whole was finished for 1 minute. I hope that you do it in the right order, but I am writing to you the steps I did:

  1 activate the Bluetooth using the FN + F8 key combination
  2. install the new hardware if necessary (some of them)
  3. start the Bluetooth stack
  4 turn on the Bluetooth on the mobile phone (discoverable)

  5. Select the Express mode > next
  6. choose visible device listed in 'Bluetooth device list' > next
  7 choose to identify passkey (1234)
  8. Enter the key in the mobile phone. Twinning will be success

  I did it on this path, and now I can send all documents in my Tecra. If you want to use as a modem, you must do this:

  1. after peeling going on Next and configure the internet connection
  (provider number) > finish
  2. the new connection will be created in the Bluetooth stack utility
  3. you can start the numbering with double click or click with the right button of the mouse and choose 'connect '.

• Bluetooth connection for laptop Vista

  I have a Bluetooth adapter connected to my laptop. When I click on the Bluetooth icon and add a device, the computer detects and recognizes my Bluetooth headset, but when I click on 'connect', I get a window titled BtwApplExt, with the error message, "the parameter is incorrect." Nothing that I've done has changed this result. How to fix the 'parameter' for my Bluetooth headset?

  Hello tangler.

  Welcome to the Microsoft Answers Forum!

  You will get this error the driver for your Bluetooth device is not updated.
  Go to the site of the factory and check if there is an update for your Blue Tooth device.

  If this does not work, you can try to uninstall and reinstall the driver on your computer.  Here are the steps to uninstall and reinstall the driver:

  Uninstall a device:

  To uninstall a device with Device Manager:

  1. launch Device Manager.

  2. in the left pane of Device Manager, open the node that represents the type of device you want to uninstall, and then right click on the input of the unit.

  3. in the context menu, click on uninstall.

  4. in the dialog box confirm the device removal, click OK to start the uninstall process.

  5. when the uninstall is complete, unplug the device.

  If you have a Broadcom Blue tooth device, I found an update on the Broadcoms site you can try:

  http://www.Broadcom.com/support/Bluetooth/update.php

  Try these steps and let us know if it works.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Bluetooth connection for Nokia phone as a modem disappears after a few connections requiring a reinstall

  Hardware: Acer Aspire Timeline 1810, Nokia 6700

  OS: Windows 7 64-bit

  Pilot bluetooth Microsoft 6.1.7600.16385 (controlled for update, this is the last version June 21, 2006)

  ------------------------------------------------------------------------

  Problem:

  Laptop can see the phone via bluetooth and pair a connection. Subsequently I can Bluetooth icon > click > join a personal area network > click the phone icon > then connect to the internet via the phone.

  After several connections/disconnections, it is not possible to connect to the internet via the phone as Bluetooth icon > right-click > join a personal area network > no phone icon.

  However Bluetooth icon > right-click > show bluetooth devices > current phone icon.

  All I can do is to uninstall the phone as a bluetooth device, then reinstall. I have done that so many times, I'm now up to COM32 and COM34.

  Then, it seems an inherent instability in the bluetooth driver? I've encountered similar problems, even worse, with Nokia E66 and Blackberry 9700 (neither of which Windows could connect to establish an internet connection).

  ---------------------------------------------------------------------

  Technical information:

  Nokia 6700 classic properties > hardware > Standard modem over bluetooth link #2 > properties > (RFCOMM Protocol TDI) > status > device works correctly.

  Bluetooth icon > show bluetooth devices > nokia 6700 icon > click the icon > an error occurred during initialization of this operation. Try restarting your computer or device (don't restart two makes no difference) (by the way when the phone appears under personal space connection > This error message may appear, but it is still possible to connect)

  Phone and Modem window > modems > lists according to:

  Standard modem - COM32

  Standard modem over a bluetooth link - not attached

  Standard modem via a bluetooth #2 - COM15 link

  Standard modem via a bluetooth #5 link - absent

  Standard modem over link bluetooh #6 - COM34

  ------------------------------

  All the solutions to this problem?

  Thank you.

  Hello qwertyyuiop,

  1. have you set up the Bluetooth modem to connect via phone?

  2. have you got the correct settings from your mobile service provider to connect to the switched network?

  There are several settings that you need to set up using your Bluetooth modem. You can get these settings by calling your service provider. They will be able to help you configure the modem.

  Or the best way to connect a phone Nokia would be using Nokia PC suite. Personally, I connect my laptop with the phone. I had several problems when you try to connect by configuring modem Bluetooth as the connection used to move frequently.

  I suggest to install Nokia PC Suite on your computer which would have received you on a CD with our phone. This will give an option to connect to the network and automatically configures the modem. You can also download the software suite the link below:

  http://Europe.Nokia.com/support/download-software/PC-suites

  DISCLAIMER OF THIRD PARTY SOFTWARE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Bluetooth connection for desktop

  Rocketfish using Micro Bluetooth adapter.  Plantronics BackBeat go 2 wireless headphones.

  Gateway All - In - One PC - Windows 7 Edition Home Premium.

  First time to connect to a PC.  Discovered that I needed a Bluetooth adapter - I bought it.

  All was well until installing drivers... Tried to update driver - no GO!

  Window popped - installing the software driver - device driver software was not

  installed successfully - peripheral Bluetooth - X - no driver found

  Can you help me to install the correct driver?

  I think this is my problem.

  Thank you for your help in advance.  :-)

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
  http://support.Microsoft.com/kb/2654568

  See also:
  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  I hope this information helps.
   
  Please let us know if you need more help.

  Thank you

• Bluetooth connect only to the Beats Studio wireless for 8 sec and no option in the audio settings.

  Any advice?

  Bluetooth connects to headphone listening Beats studio, but only for about 8 seconds and will not appear as an option in the settings of the sound or airtime. MBP 2011 using a dongle usb so I can use bluetooth 4. I tried with another pair of headphones bluetooth and same problem. Bluetooth dongle is comparable with my Mac Mini (2011). I use a thunderbolt to a display connection because the screen is cracked. The usb dongle is this: https://www.amazon.com/gp/product/B00F85ZPIY/ref=oh_aui_search_detailpage?ie=UTF 8 & PSC = 1

  (tried reseting the PRAM and deleting BTpreferences (.plist))   Thank you

  Try to reset the BlueTooth module

  Keep the change option keys > BlueTooth icon at the top right > debug > reset

• How to connect my LG HBS700 Bluetooth headset for computer laptop windows 7

  Hi, I have a LG bluetooth headset

  http://www.LG.com/us/cell-phone-accessories/LG-HBS700-tone
  With this bluetooth headset, I wanted to connect my computer laptop windows 7.
  I am able to pair this head game, but it still doesn't show any list of sound settings where I can choose bluetooth together as my default helmet.
  Please help me to play music from my laptop via this Bluetooth LG headset. HBS700

  PROBLEM SOLVED:

  In fact my Windows 7 used OLD Bluetooth drivers for the device HP laptop.

  So what I did is, 1) is went to the HP site 2) found support my model 3) selected drivers drivers 4) installed Bluetooth drivers 5) combined the head game. (6) make a right click on the device coupled--> you will get an option called "Controls" [if not its simple - your bluetooth driver no is not updated]
  (7) then after you select "Controls" - you will get a screen to connect / disconnect option.
  (8) select the Connect button
  (9) installation it will require drivers for your device.
  (10) then you are READY to USE your Bluetooth Head set.

  I'M VERY HAPPY :) that my head set work with my laptop... :) Thanks to my friends :)

  -Anya Prasanna @ Banagalore, India

• WIN 7 does not have the net driver for Asus A2D WHAT CAN I DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.

  WIN 7 does not have the net driver for Asus A2D. or I'm unable to find it.
  WHAT I CAN DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.
  Thanks for any idea, address etc.
  DragMil
  You can wito to * address email is removed from the privacy *.

  Try an older driver installed in compatibility mode

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• Bluetooth connection between iPhone 6 and MacBook Pro (mid-2014)

  I'm trying to connect my iPhone to my MacBook Pro 6 so that I can use the universal Clipboard function in the Sierra. Both devices are updated, software-wise, and both devices meet the requirements of continuity system.

  When the settings bluetooth for the MacBook, I see my iPhone listed as a discoverable device.  When I click on the "even" button, the numeric code appears, followed by the notification on my iPhone to confirm the code. As soon as I confirm it, the screen bluetooth on my MacBook poster that my phone is connected for a few seconds then disconnects.  After that, my phone will say that the device, that I am trying to connect is out of reach, even if both devices are currently sitting side by side on my coffee table.

  It could very well be a simple solution to what I forget quite simply, if I appreciate any help that can be provided.

  

  Hi olly739,

  I understand that you do not want to use the universal Clipboard with your iPhone and your Mac. If both of your devices meets the hardware requirements so the following configuration requirements, you are ready to use the universal Clipboard (no necessary Bluetooth pairing).

  • Each device is connected to iCloud with the same Apple ID.
  • Each device has two turned on Bluetooth.
  • Each device has Wi - Fi enabled.

  Steps to follow for the universal use of Clipboard:

  1. On a single device, copy the text, image or video as you normally would. This content is added automatically to the Clipboard of your other device nearby. She stayed briefly, or until replace you it by copying something on each device.
  2. On the other device, paste the content as you normally would.

  Continuity of use to connect your Mac, iPhone, iPad, iPod touch and Apple Watch
  https://support.Apple.com/en-us/HT204681

  Sincerely.

• Bluetooth connectivity on iOS 10 issues.

  Given that I have updated to iOS 10, my 6 s iPhone more does not properly connect to my car - 2007 BMW 530xi. I had no problem before updating to iOS 10.

  MY phone shows that it is connected and so does my car. However, my phone calls are abandoned at the beginning of the conversation. I answer the phone through my car, but it won't work for some reason any. Then I try to change settings of the speakers in my car on my phone back to my car nothing helps.

  Please do not ask me to try simple troubleshooting stupid as I did. I used iPhone and products Apple specifically for the iPhone 4. I know what I'm doing. It is only fair that iOS 10 broke some internal features regarding the Bluetooth connectivity.

  If anyone else has similar problems with their 10 iOS Bluetooth not connecting, please state so that Apple can precipitate a quick update. I can not even use my Bluetooth in my car which is very frustrating as I drive a lot for work and won't put on a helmet or something else on my ears while driving as it is useless for me.

  I have EXACTLY the same problem. For me, it's a 2016 X 3, but the behavior is the same. Devices think they are connected, but are not in force.

  I have reset my network connections, I disconnected and reconnected manually and some other stages of trials and errors. None have assimilated to the sustainable, stable connection I had with iOS 9.

• iPhone bluetooth connectivity 7

  I've recently upgraded to the iPhone 7 and have had problems of intermittent connectivity with Bluetooth pairing, especially in my vehicle (Kia Optima), but also sometimes with my bluetooth (Jawbone Jambox Big) speaker. With my iPhone 6s, I could always count on turning on the car or speaker and connect it without fail. Now, my car bluetooth could pair one out of every 10 times. My speakers will pair about 75% of the time. When I try to re-pair the car (a much larger issue) often the iPhone will not see the under its section discovered in Bluetooth Handsfree device. This is not the case with my wifes 6s iPhone (it's also on iOS 10.0.1). Does anyone else have this problem?

  Finally someone who has the same problem as me! I had noticed the bluetooth icon blink when I was on the phone setting up ApplePay with my CC company but I just thought it was restore my Apple Watch. Then when I left work I set up my iPhone 7 to work with my stereo handsfree in the car. It is remained connected for a little, but then randomly, he disconnects and refuses to reconnect. He does occasionally with my Apple Watch as well. Yesterday, I feel as if I had a stroke of luck using my BT headset since they worked for a good 45 min before I have them cut.

  I spoke with AppleSupport on Twitter and I did the steps that they told me to do. I reset the network settings and I have not matched and repaired the stereo several times. The only thing that I did is a complete restoration of iOS which seems odd because it's an iPhone brand new. I hope that it is just an annoying bug in iOS 10.0.1 and that an update will come out in a few days to fix. Worst case is a bad chip BT and I need to swap out for a new phone.

  My iPhone 6 had a BT connection problem.

• Music Bluetooth connection while the execution is HORRIBLE

  I've had my Apple Watch - sport watch 42 original - since the date of launch.  I use it all the time.  But from the beginning, I have known a glaring problem and a huge inconvenience: if I try to listen to music via bluetooth to a BT Headset activated during the running/jogging to Apple Watch, transmission is atrocious.  The music signal / autour jumps, there are 2-3 second lag, the signal falls completely, etc..  It does not work perfectly.  And the issue is NOT the BT headset.  The problem occurs on each BT headset, I tried: Dear and low-end models.  These same BT headsets work absolutely perfect w / my Mac and iPhone.  The problem is the watch...

  You can imagine how frustrating is: who wants to listen to music from the Apple Watch for BT headphones when he cut and in a few seconds.  So now, I end up using the Apple Watch to track my physical condition, but am forced to lug along my iPhone if I want to listen to music.

  Here's something very revealing on the signal low/inaccurate bluetooth from the Apple Watch: if I sit stationary or walking like a robot without arms or by moving the head, streaming works much better.  But this isn't a solution.

  How can I fix it?  Is it even fixable or is it just another glitch in the post World Steve Jobs...

  My brother-in-law has the same w/his Apple Watch BT problem whenever it tries to use it as a source of music during the race...

  Hello

  It is a known problem.

  It's frustrating, and it should be fixed. I have experienced the same problems myself.

  You can report it directly to Apple via Twitter: @AppleSupport

  Only one of the thousands of complaints across multiple sites to support > Apple Watch and the Bluetooth connection is terrible during my career.  Anyone else having the same questions?

  You can also provide your comments here > http://www.apple.com/feedback/watch.html

• Poor wifi and Bluetooth connectivity after iOS 9.3.1

  9.3.1 IOS is installed on my iPhone 6 wifi in my house guard fall!

  My Bluetooth connectivity keeps cutting to work! So annoyin!

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (4) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.