Bluetooth connectivity for external headphones with the iPhone 5

My iohone5 do not brand Jabra headset connect Bluetooth. It detects it well.

can some body advise how to solve this problem?

You need to put the headset in pairing mode. And if the lookup table is full, you may need to do a factory reset on it all first. Time to get out the manual for the headset.

Tags: iPhone

Similar Questions

  • The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?

    I'm trying to establish a connection between my iPhone and my iMac. The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?

    This connectivity is not supported (except to attach them). What you trying to do?

    Barry

  • iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

    IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

    How to solve this problem? Is there someone who has the same problem?

    Howdy,

    Thank you for using communities Support from Apple.

    I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

    If you use Bluetooth

    1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
    2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
    3. Restart your iOS device.
    4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
    5. Update your iOS device.
    6. Install the updates to the firmware of your car radio.
    7. If you still not connect, contact Apple technical support.

    Help to connect your iPhone, iPad or iPod touch with your car radio

    See you soon.

  • How do I pair for windows 10 laptop via bluetooth with the iphone 6

    How do I pair 6 + for windows 10 laptop via bluetooth with the iphone?

    You do not have. This isn't a feature of iOS. It has never been.

  • Hello there is a problem with the iphone 6 and you do not want to connect to the Apple Store

    Hello there is a problem with the iphone 6 in more you won't connect to the Apple Store.

    Buenas tardes,

    Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

    Then sign out of the iTunes Store and reconnect.

  • My new Apple TV v4 does not smoothly on Airplay with my MacbookPro and Air laptops but with the iPhone and iPad Airlay gets so juddery and then goes off - laptop computer WiFi connections all that happens on clues?

    Devastated to find that the new AppleTV works great on Airplay / mirroring with the iPhone and iPad devices but completely useless on the NEW laptops.

    Trying to show any video for example utube creates immediately hop on the TV screen when you use the Macbook and in no time the WiFi connection is stunned.

    What is going on?

    I use ElCapitan, and the last 15 "16GB i7 Macbook MacbookPro and not expect a problem with streaming media.

    Absolutely well on Airplay with bith an iPhone 6 Plus and also an Air iPad

    This will be due to a network problem. There is a difference between mirroring of a phone/Tablet and grow to a full desktop in real-time

    Mmake that there is no other activity (other streaming, web browsing, backup network etc.)

    Try to connect the Apple TV via ethernet

    To see a current state of the network to obtain a report of istumbler or similar. Look for the strength of the signal, noise, networks nearby

    Test on another network

  • The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

    The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

    I love the Apple Magic Keyboard to be very light (I want it with me everywhere). I also like that I can choose the layout of the keyboard I want (Canadian multilingual), which is not available on any keyboard for any brand, with the exception of Apple iPad (and I did a ton of research). I have problems with the old model of keyboard Apple Wireless because of the Bluetooth connection: I often have trouble connecting. I want a reliable keyboard. I don't like having to plug the keyboard on the iPad, and I think that a wired keyboard can more reliable and safer than a wireless keyboard. And a wired keyboard never had battery problems.

    I read that the Apple Magic Keyboard can work wired with a Mac without bluetooth. And I read that some USB keyboards work with lightning to the USB camera adapter. There are several keyboards with a cable (Belkin or Logitech) lightning, but none with the available Canadian multilingual.

    So, if I buy a magical keyboard Apple and a Flash to the USB adapter of the camera, according to my needs, I'll be satisfied or I'm going to be disappointed?

    A better solution would be to have a male-male cable lightning between the keyboard and the iPad, but I don't find any of these products anywhere.

    Thank you.

    It will not work. And where did you read that the keyboard works wired with a Mac?

  • Help connect Dextop Remote queue (win7) with the Iphone 5 by using the client RD

    Hello

    I can connect my iphone 5 to my laptop (OS windows7) with client RD while my iphone is connected also with my laptop wifi hotspot. And I can operate my laptop with the iphone well while I'm in the laptop wifi range.

    Is it possible to control my laptop iPhone while my phone is not connected to the laptop computer wifi hotspot?

    I use 3 G internet in my phone so I get out of the House.

    Hello Sanjidreza,

    Thanks for posting your query in Microsoft Community Forum.

    The issue you mentioned could better answer the support of Apple iPhone. According to your description of the problem, you are able to connect and control Windows 7 computer using iPhone whose parameters are in the iPhone, so you don't have to get in touch with the support of Apple iPhone.

    https://www.Apple.com/ca/support/iPhone/

  • How to connect & activate external speakers to the Windows 7 desktop PC

    How to connect & activate external speakers to the Windows 7 desktop PC?

    Can't get PC to recognize external speakers

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that the PC recognizes not the external speakers.

    This could be due to hardware conflicts.

    I suggest you to refer to the suggestions of Fahimulla K replied on March 4, 2010 and check if that helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-wont-recognize-my-external-speakers/60865d58-1742-4AE8-b0f1-c623f2285907

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • Is there a reason for not going to the Iphone 7 if on the upgrade plan?

    We arrived the 6s Iphone last year and we pay for the upgrade plan. To be honest, I'm not impressed with the Iphone 7 and still like the 6s. But because I pay more than a month for the upgrade package, it would be stupid not not to upgrade? I suppose that in theory if I have not improved, I would pay the phone is turned off at the time where the 7 fate.

    Sorry if this is a stupid question, how they paid you for the phones now is a little obtuse.

    I see no reason not not to go other than to repay your existing phone and get out from under the need for payments monthly.

    The CPU of the 7 is significantly faster than in the 6s, and water resistance is a big bonus. The best camera is nice, but I'm not good in taking pictures of everything under the Sun...

  • Hearing sound stops when it is used with the iPhone

    Using sound Linx 2 hearing aids. They are matched correctly with the iPhone (worm 9.3.3). When receiving or phone call, right aid will report the outage battery and closed. Resound app shows the phone id psired AIDS both all-around and IPHONE. Good help is dead unless I open & close the door a few times the battery OR if I do nothing, the 'start-up' bongs departure once a period of time and assistance is working again. Same scenario will happen if I'm lonely playoing on iPhone. Less than a minute the right help will give its battery failure and close. These problems have existed at least two previous versions of the software on iPhone. Does anyone have any ideas or suggestions?

    There could be something in this article to support that can work for you > use to aid hearing - Apple iPhone supported

  • My disappointing experiences with the iPhone 6

    After 11 months of owning an iPhone of 128GB 6 + the screen started to flicker, a gray bar would flash at the top of the screen and the touch screen has been insensitive.  This was due at random intervals.  I restarted the phone and the problem persisted.  I backed up my data and reset the phone like new.   The problem persisted.  I had my first appointment at the Genius Bar. He went a lot; I was leaving in 15 minutes with a new phone (my first replacement).

    I came home and restored my backup, and after a day, the problem came immediately.  Again, I have reset the phone again, and the problem persisted.  I did another (second) meeting with the Genius Bar (four days after the first).  My genius was excellent.  He had seen that problem before; He showed me that if he put a little pressure on the phone, the screen will become sensitive while he kept up the pressure. He took the phone and showed some of the other Geniuse the problem and how do I get the screen to become sensitive.  He assured so was completely related material and I was just out of luck and that it had nothing to do with my backup.  He asked me to contact Apple, since it is a problem he could see quite often with these phones.  In the end, I got another new phone (my second replacement).

    Once I got home I restored my backup once more.  And yet once again, the problem came back.  At this point, I was getting angry.  I have two young children (under 3) to home and make those appointments around their program is difficult.  Back to the apple store! This time, it was a little harder to get a solution. Engineering had to obtain the approval of the Manager and then he could not find the replacement phones and all the experience took a lot more time then my two previous trips.  In the end, I got another new phone (my third replacement).

    Yet once, I asked if this might be the result of my backup, and even once, I was told no.  I expressed that it becomes ridiculous and controlling common only I see is the backup. He suggested trying the phone for a few weeks without food and restaurant then. I never restored and just started over again.  The phone has been flawless until today, it lasted 38 days.

    The problem came out of the blue.  I have not installed anything new, nothing extraordinary happens today.  The screen started to Flash, returned the gray bar, and the screen becomes unresponsive.  The first Genius Bar appointment I can do is in 2 days.

    In short, in the space of 10 days, I've had four different iPhone + 6s fail in exactly the same way.  My family uses exclusively apple devices.  I had an iPhone 3s, 4S and now 6 +.  My wife had iPhone 3, 5 and 6.  We have all two Ipads and I an Apple Watch for Christmas.  We have had excellent experience with our devices.  I am more unhappy with the iPhone + 6s.  I have about a year left before I can go again, so I'm stuck with what is becoming a useless device.

    I have seen others with the same issues, but no solution is permanent.  This issue should be fixed.  I'm afraid that my next replacement will last 90 days and then I will be paying $329 for a replacement which is likely to fail again.

    What is your technical support question that we, your fellow users can answer?

  • Hi, I have the iphone 6 in warranty period... .working perfectly, but I want to exchange it with the iphone 6 s. Please suggest.

    Hello

    I have the iphone 6 in warranty period... .working perfectly, but I want to exchange it with the iphone 6 s. Please suggest.

    If your phone is in warranty period or not has nothing to do with trying to swap an iPhone for a s 6 6.

    Apple not no trade ins, so you have to sell your iPhone 6 to finance the purchase of a new s 6, or you can use the Apple recycling.

    The only other thing you can do, it's that if you bought your phone directly from a carrier rather than Apple, you can exchange your phone with a carrier in order to upgrade to a 6 s.

    That's all.  Other than that and if you bought at Apple, you must sell your iPhone 6 and use that money to buy a 6s instead.

  • while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

    while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

    earlier, I used internet and transfer files through this link, but now it is showing the device refused permission. I have checked all the settings, but could not remedy any problem so kindly help me so that I can connect via wifi to my mobile samsung kies.

    Also, I am facing problem in sending files via Bluetooth, and at the same time my mobile can easily transfer the file and the music file actions with my computer via bluetooth which I did not understand.

    Rental offer the solution to both problems. In my computer I have window7 profeessional.

    Marie-Odile THE

    Hello

    1. What is the brand and model of the computer?

    2 have you made any changes to the computer before the show?

    Reinstalling the Kies application and check if it helps.

    See this link:

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    I also suggest you to contact Samsung and check: http://www.samsung.com/us/support/

    Regarding Bluetooth check out these links:

    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Bluetooth devices do not work correctly on a computer that is running Windows 7:

    http://support.Microsoft.com/kb/980396

    Also see this link: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    Note: The article mentioned above is also applicable to Windows 7.

    I hope this helps!

  • Error: A connection has been established with the server, but then an error occurred during the connection process.

    Hello

    I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

    ID from step 1

    Server NIBKSQLCLUST

    Job name LSBackup_DRIB

    Newspaper log shipping backup job step name.

    Time 00:00:02

    SQL severity 0

    SQL Message ID 0

    Operator by e-mail

    Operator Net sent

    Operator paged

    Retries attempted 0

    Message

    2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

    2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

    2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

    2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

    The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

    Thank you

    Boonlep coulibaly

    Hello

    I suggest you to send your request from the link and check.

    http://msdn.Microsoft.com/en-us/hh361695.aspx

    http://msdn.Microsoft.com/en-us/library/bb545450.aspx

Maybe you are looking for