Bluetooth speaker stops after reboot

Similar Questions

• T440p stops after reboot

  My T440p has a Samsung SSD and Optimus. I use full disk encryption and boot legacy ata.

  When I use Windows 8.1 the laptop restarts without problem. Even at the restart of the installation of Linux. However every other operating system reboot (I tried different versions of Linux and OS X), it gets until the thinkpad logo appears and then it just turns off. Then it may normally be started and everything works fine.

  It's just a bit annoying, because I often change operating systems and full disk encryption ata remembers the password resets. If of course it stops instead of reboot, I have to re-enter the password each time that I reboot.

  Someone has an idea what is the problem? That may be due to some changes in Haswell, or a new feature in bios intel? (Disabling Intel RapidStart has not changed anything)

  I have had no recent experience with LILO, but most of my ThinkPad are dual-boot Win-Fedora, and I always leave the Windows bootloader in charge. And as you do, I disable UEFI and all run them on legacy startup.

  Your problem may lie in the configuration of the HD password? It's the first thing that comes to mind that this could

  security related.

• Bluetooth mouse reconnect after reboot

  I recently bought a laptop Acer Aspire V3-575-53BP running Windows 10 and a Microsoft Bluetooth Mobile mouse 3600.  They have paired fine initially, but every time after that I turned off the computer and restart, the mouse does not connect.  When I go to Bluetooth settings, it shows the mouse as always matched, but I have to remove the device and re-pair the helmet to make it work.  Of course, I don't want to do that I start the computer each time.  Any suggestions on how to fix this?  Thank you!

  I dropped the Bluetooth mouse.  Don't think it was a problem with the Acer, I tried the mouse on my laptop (ThinkPad) and got the same result.

• iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

  Axiomer wrote:

  New speaker of iFixit.

  It is a problem.

  iPhones are not serviceable by the user.

  You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

• Top of the Tower stopped working, no reboot. Stop after BIOS and black screen then

  Data;
  Computer HP Pavilion dv9000

  MS Vista operating system

  Process;

  When I start the computer, it stops after the session of the BIOS and just give me a black screen empty, with a marker in the upper left conner.

  As I have no recovery CD, I can't do anything (software installed when I bougth the PC without any CD included).

  I have a good software entering (and identification number is located on the computer), but I can't find anywhere to download on a recovery disc (CD)?

  Very frustrating!

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• iPhone does not communicate w / bluetooth speaker when it is plugged

  9.3.2 IOS on iPhone 4S

  I sometimes use my iPhone on long journeys to listen to my music and GPS directions using a speaker phone bluetooth. I noticed in the last months, after a software upgrade, that 2 devices communicate very well until I have plug the power cord into the iPhone. As soon as I do this, all sound stops coming out of the bluetooth speaker and nothing comes from the iPhone itself. I have not found any settings that look like they would affect. Any suggestions?

  Have you checked if the two devices are paired again?

  Have you tried to disable the bluetooth connection and turn it on again after plugging in the power cord?

• Yoga 3 Pro: speaker stopped working (headphone jack still works)

  Recently bought Yoga 3 Pro (Windows 8.1) the Lenovo Web site (2 months ago).

  The speaker worked fine until yesterday. All of a sudden, the speaker stopped working, after I used the headset.

  Now, only the helmet works and no sound can get out of the enclosure.

  I updated the driver from RealTek speaker to a new version 9/2014. It did not help.

  Does anyone have an idea on what could be the cause and how to fix it?

  Thank you!

  My problem has been resolved to back the audio driver (which has been updated
  through Windows Update automatically) to the factory default. The speaker
  works again once the default driver has been reinstalled.

  Now, one thing to note is that you must also disable the automatic
  "update driver in" System Properties "==>"Material"==>"Device"tab
  Installation settings"==> no, select"Let me choose what to do"==> and
  Then select "never install driver from Windows Update." and ensure
  "Automatically obtain the device app and info provided by your device.
  Reference the manufacturer"is checked. This will not prevent the driver gets automatically
  modified by Windows Update after your next reboot.

  I hope this helps fix your situation also.

  BTW, the likelihood of a material defect (speaker) is very very low...

  Good luck!

• El Capitan keyboard does not not after reboot

  I have a Macbook Pro 13 inch with OS X El Capitan 10.11.6

  After one of the recent improvements, I met a problem, if I take my mac, the keyboard and the trackpad to respond enough lag (if I constantly try to move the cursor, he'll have a time and then for like half an hour it will completely stop responding and after this the other repeats). It only happens after reboot and only on the login screen. So if I put my mac to sleep and then wake up, everything will work perfectly. Same thing if I managed somehow to connect, once the keyboard and trackpad respond correctly. The only button that works fine after reboot is the power button, but it doesn't help much, because it charges does not solve the problem somehow: as soon as the user selection screen, keyboard and mouse stops responding again (or should I say "start answering from time to time").

  I saw lots of questions here on the keyboard does not not after waking up, but as you can see, this isn't my situation.

  Try again in Safe Mode.

  Start up all by holding down the SHIFT key. It takes five minutes longer because it is a disk first aid on the way up, and you MUST provide your user name and password, even if you normally the automatic connection.

• Can't use Firefox once after reboot my Mac, then he won't.

  After reboot or a total, followed by the setting stop running, I get use of Firefox. Once I close out of it, I can't hire back in.
  I checked and updated Firefox, no help. I am currently running Yosemite on my Mac.

  I tried a Force Quit on Firefox. Notice that the small point under the Firefox icon is missing. So, I then clicked on the Firefox icon and it has jumped up and down. Alto! I can now engage Firefox without having to restart my computer. So does that mean Firefox did not leave on its own? And why all of a sudden start. Inquiring minds. If with that I seem to be OK once more. How weird.

• Bluetooth works only after restart

  I got my new iMac a few months ago, and since then, I had this annoying problem.
  My bluetooth mouse and keyboard don't work after a reboot, in fact all bluetooth doesn't work after reboot.

  When I start my computer and connect with a second mouse and plugged in the bluetooth keyboard is "not found" and there is not in the system of care either in bluetooth. But I googled and tried different things and makes the SMC reset and after restarting the bluetooth is rising and running after the connection...

  Do I need to restart my computer everytime I want to use it?

  Hi Anna,.

  You have an imac 27 "?

  I bought a new one and spent a total of more than 20 hours on the phone to apple care. After a month, I return two different imacs and am now on the third.

  After giving me bad suggestions a month, apple now care, it is true, now, not a month before, tell me that they have discovered a 'known problem' by which the new iMac 27 "with some configurations loses their bluetooth connectivity if an update of the BONE is made up of el capitan!  I don't see any other product you would have a problem with, even if you bought it new.

• Satellite L is not start after reboot or shutdown

  Hello

  My phone after reboot or shutdown is not starting.
  I need to turn off the computer and wait 10 seconds and try again, after it start ok.

  All suggest?

  Thank you
  Dvir

  Difficult to say why this happens
  Did you test the HARD drive for a possible damage?

  Test the drive using HDD Drive Fitness Test.
  The HARD drive is perhaps not entirely correct and it must be completely stopped before you start spinning once again

• Satellite C50-A-172 - no Toshiba logo after reboot

  My toshiba laptop C50-A172
  How to fix my laptop
  did not have the toshiba logo after reboot... .Black plssss help me screen

  Hello

  Remove the battery and unplug the AC adapter.
  Press and hold the power button / stop along 30 sec.
  Then connect the battery and the AC adapter and press the power button / stop.

  What happens now?

• Tab2A10-70F - 'Services Google Play has stopped' after update

  After update my Tab2A10-70F, an error 'unfortunately Google game has stopped Services' message block other applications. How can I eliminate this? Google store no more work. I need help please.

  Comment to Moderator: New thread is created. Edited topic. A: Re: How do I send a private message?

  Thank you. In fact, I was able to fix it by disabling the Google Services to play then uninstall all updates. After reboot, many applications, including the Google Services to play began requesting updates and after updates, everything is OK except an inscription that appears after startup: "a movement of application is finished.

• Windows 7 does not stop after updates

  My computer will not stop after you install updates. What is the best way to solve the problem?

  Thank you
  Cam1956

  Hi cam1956,

  The updates take time depending on the size of the file. If the update has hung so I suggest you hard reboot the computer and see if you can boot to the desktop. If you can boot to the desktop and then the updates are not installed will appear and which will be installed during the next update.

  Run the troubleshooter in Windows 7 for Windows Update turn when starting the computer on the desk, and perhaps that should take care of the updates. Install updates by selecting two to both as the updates and see update is actually causing the problem.

  Once you have identified the update that causes the problem, you can access the link below and install the updates manually.

  http://support.Microsoft.com/default.aspx/GP/downloadover/en-AU#TAB0

  If you know the updates that must be installed, you can manually enter the KB update in the search bar the link to download the update manually.

  If the computer does not start on the desktop, then I suggest you to start safe mode and see if you can boot to the desktop. If you are in the office, do a system restore which will take the computer to a time where it was working fine and then start to install the updates manually as suggested above.

  Go to the link below for the procedure to start in Safe Mode and system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Let us know if the problem is not resolved or for any other help.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pairing bluetooth speaker

  Blackweb Soundbrick bluetooth speaker.  I turn it on - voice ad power-pairing. BlueLight flashes quickly and the music playing on my laptop cannot be heard from the speaker if I connect it with the cable supplied with the speaker.

  I click on the Bluetooth devices icon at the bottom right of the screen, says that Bluetooth is turned on and says that soundbrick is associated. Why can I not hear sound through the speaker unless I connect it with the cable? What should I do to fix this?

  I use Windows 8

  Thank you for your response.

  It turns out that after I had downloaded the update Atheros Bluetooth 8.0.1.305 the site to Acer.com and unzipped, it, I have it has not installed correctly.  Finally, I clicked on the exe Suite Bluetooth and it installed the update on my computer, and the speaker was able to connect.  Everything works fine now.

  Marg