Board purchase

Similar Questions

• Back to Yosemite

  See you soon,.

  I need bolt to El Capitan., but the version of Yosemite that I have access to (10.10.5) is only an update, not the 1st version and cannot be opened.  Need a version 1 "bootable".  Where and how can I get?

  BOE

  Where did you get your first Yosemite? At ist 'on board' purchase of the computer?

• I was promised 5 free plugins with purchase of first training pro / total bundle... dance and clearing the Board, foam, burst... where I can find for download

  I was promised 5 free plugins with purchase of first training pro / total bundle... dance and clearing the Board, foam, burst... where I can find for download

  There is nothing extra to download, these effects are included in the installation of After Effects.

  They are in these categories of effects:

  Simulation >

  Card dance

  Caustics

  Foam

  Shatter

  Wave World

  Transition >

  Card Wipe

  Generate >

  Radio waves

• Retina pro MacBook 13 inch (early 2015): logic board failure

  I have a macbook pro retina 13inches (early 2015) that I use only for study and check emails. a few weeks ago I noticed that the camera not working. I took the mac for help and they told me it's a question of logic board and I should have a new. It's too expensive, and the warranty just expired. Is this a common problem with MacBook? Feelimg so frustrated! I thought I had purchased quality equipment.

  I have not heard of what is a common problem.

  Questions on the Repair Service for Apple's deposit - a lump sum and a cheaper way to go.

  Genius of booking http://www.apple.com/retail/geniusbar/

• 15 mid-2010 "MacBook Pro Logic Board

  Excuse me if I do this wrong, because this is the first time I ever used something like this, other than looking for things.  So I apologize in advance for any missteps.

  I recently took my mid-2010 "15, 2.4 GB MacBook Pro in an Apple retailer approved and found the logic board is the problem.  They also informed me that there was a 'reminder' on this point to be replaced free of charge.  However, this recall went to day a few years ago.  Nice, since I have nothing received from Apple on any reminder & it was not giving me any problems so far, apparently I'm screwed now.  The dealer said that because my machine is now considered to be "vintage", Apple has more room, the #661-5566 or #661-6360 in stock MLB & my logic board current should be sent to Florida to Arizona to be "renovated" and then reinstalled.  Apparently costing a little more than $500.  Ouch!

  I had been thinking of buying the new 2016 15 "MacBook Pro when it comes out later this year and using my old one as a backup.  However, as Apple could not extend the courtesy of advising me of this initial reminder of my logic board, spare me $500, I am strongly reconsider this purchase.  Unfortunately, I like Apple products and have bought several iPads, the large iPad Pro and Apple iPhones right up through my iPhone current 6.  Invested in Apple's it makes profoundly difficult to get away from them, but not impossible.  Had they notified me of the recall, I wouldn't have these problems now.

  My logic Board recommendations or suggestions are greatly appreciated.  Thanks in advance.

  Welcome to the forums of Apple users.

  Nobody is allowed to speak for Apple. Users can give their opinions and advice you if you have a technical question.

  And here are some:

  Consumer Reports suggests that if the cost to repair a unit is more than half the cost of a new, you should get a new one.

• Replaced logic board

  December 2015 new display iMac with the retina 5 k, 4 GHz Intel Core i7, 16 GB 1867 MHz DDR3. The problem started when I opened a photo in preview or Photoshop. The screen was decided in 2 different colors and have to restart. I couldn't open a pic in the preview and work in Photoshop.

  During this time, my camera was working fine and I used video Skype without problem. Then in January, I sent the new iMac to an Apple dealer to solve this problem, and they changed the logic board. It took 4 months to be repaired, he I just for 2 weeks now, preview works fine and photoshop as well BUT I realize that the camera to the iMac does not and the microphone internal as well.

  I have 2 questions.

  1 - How the camera and the internal microphone can be fix

  2. when they replaced the logic board, I lost my serial number not available.

  Really need help.

  Where are you from?

  You do not have a real Apple Store to take your iMac to any type of repairs?

  You take your iMac to a new Center Apple authorised dealers/repairers and it took them almost 5 months to repair/replace a logic board in your new iMac?

  If a new iMac, your statements read as if they were NOT in the very competent repair center for me.

  I would have set up an adjustment NOT seen my iMac nine 5 months and fry it with, however, other problems.

  Why, no real Apple don't Store to take your iMac to.

  Is this repair center labeled as an authorized Apple dealer/service center or is it some computer shop electronics/generic, simply stating that they can fix Macs. Doesn't seem to be a very competent repair center, at all! IMO.

  I think you need to, once more, it bring for repair as the repair center has not done something right (AFTER 5 MONTHS!).

  If you have any actual Apple store, you can drive to, I bring in for repair and explain what has happened with this new iMac, so far.

  Better yet, you can call Apple directly at 1-800-MYAPPLE and speak with the service the customer of what happened with your new iMac purchase and see what they can do for you.

  Your iMac should NOT have this kind of questions after a month and still problems after waiting 5 MONTHS for the logic of BIG boxes replaecment after just a MONTH of USE?

  Contact Apple directly, first.

  This iMac should NOT have all these difficulties.

  See if they would replace your iMac and the plug by another new unit model.

  If this does not happen, and they offer to continue to fix, then make sure that very soon that you pay and save extended AppleCare that gives your new iMac two additional years of warranty repair.

  Good luck!

• Tecra S11 Bulletin Board doesn't show any updated drivers

  Hello

  Tecra S11 Bulletin Board is one of the best service I've ever had, but when I visit the page of the Toshiba driver, I found a few updated drivers, but the scoreboard does not show these updated drivers on my machine.
  Is this possible? or am I disabled something?

  > but when I visit the page of the Toshiba driver, I found a few updated drivers, but the scoreboard does not show these updated drivers on my machine. Is this possible? or I am disabled
  > something?

  Yes, it is possible. Personally, I've never used Bulletin Board removed since purchased my knees. Anyway, you can update drivers yourself

• You can improve the macbook pro 15 inch 2015 logic board

  I am the proud owner of a macbook pro mid 2015, 15-inch retina display 2.2 Ghz i7 (integrated graphics).

  I was wondering if it is possible to upgrade dedicated to one with the graphics card logic board or is there a compatibility issue?

  I know that the macbook pro with dedicated graphics card is the same size and all that one that I have so I was wondering if the logic boards are the same size.

  I hope this isn't a stupid question.

  Bruno jeanluke says:

  I was wondering if it is possible to upgrade dedicated to one with the graphics card logic board or is there a compatibility issue?

  I'm sorry. After the purchase, upgrade of the internal components is not possible.

  If you wish, you can sell the Mac you have and buy another Mac with the specifications you want.

• HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  MODEL

  Compaq Presario CQ42-372TU computer laptop

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCac=...

  PLZ ANY BODY HELP ME

  You can upgrade to an SSD.

  The simplest method is to use an SSD as the Corsair Force 3 and don't forget that you buy the kit of migration.

  The migration kit comes with cloning software and a usb to SATA power cable that connects again SSD.

  It is recommended that you purchase and SSD that is approximately 256 GB in quality if you can find one that is affordable.

  SSD with migration in a kit options search I did.

• Color LaserJet M277dw: Purchase a new ejection M277dw impossible drawer which allows to change the toner cartridges

  I found a large detachment (M277dw - drawer Toner at corner), and I stopped by Office Depot and looked at their floor model.

  Their floor model tray down (gravity only) and the blue lever allows the toner tray slide.

  My device behavior is different.  Tray (manual feed) must be forced to land (about 3 pounds worth), and I noticed that the drawer tonor dates back to about one-tenth of an inch.  As noted in the other post right has a notch that moves (mine moves like the store model).  And if we try to shoot with the blue of the lever down (right side tab moved and is clear.  "It seems that he should leave the Board move), the left will not come loose.  If one pull with approximately 10-15 kg of force (firm but not crazy hard) I can see the right side to move slightly but not on the left side.  He feels that the left side is stuck. The movement of the drawer Assembly seems a bit odd and may be the reason why try it manual power resisting decline.

  Is there a transport screw that I missed?  Nothing in the instructions to the browsers screw in place.

  Any recommendations?

  I returned the printer m277dw to Office Depot and applied the credit to m477fnw.  A m277dw of replacement was not in stock, and the m477fnw fits my needs better. If this proved to be a win-win for me.  Office Depot requires the original box and the Office Depot a proof of purchase to return (I got both).  Office Depot was not easy to work with.

• Try to find the story of purchase of microsoft for a Wasse Abin Learning Center

  our server crashed and had to rebuild and there were services Terminal Server than Cal s on it and it disappeared. you will need to find Microsoft if they purchase history for either Wasse Abin Learning Centre of Wikwemikong Board of Education for the past 10 years. If there is Terminal Server Services that have been purchased that they registered. It is for Windows 2000 or Windows 2003

  We have 10 to 15 people who need Remote Desktop, and these are connected with the CAL Terminal Services licenses

  Only 2 people can use remote desktop after a complete installation.

  Can this kind of history for a Microsoft Research School

  Unfortunately, this peer-to-peer forum has no resources to track down the last purchases.  Maybe you should find the original order forms and start from there.  Also, please see: how and when to contact Microsoft and support Customer Service

• Warranty when purchased in the Canada U.S.?

  Place before the bad Board?
  If I buy an Acer v7-482pg-6662 (NX. MB5AA.003) from a retailer allowed Acer to the Canada warranty service will cover me USA where I live?  It's cheaper to buy it at the Canada and the United States, and I'm back much.
   
  Please note - the v7-482pg-6662 is available in the United States in a few merchants (but not much) and is not listed on the US site.  It is however on the Canada site.  Its sister unit, v7-482pg-6629 (NX. MB5AA.005) is listed on the USA site (same characteristics).
   
  I read the warranty and it seems I'm covered both as if there is no border, but if I have a problem in the United States, where I am most of the time, and where I would record the computer, I don't want to know the hard way, that it is not covered.
   
  And while I'm at it, 2 other questions if someone of you know.  First of all, could I get an extended warranty on it to Acer, living in the United States?  And nobody knows if the doubling of the guarantee credit card will work?
   
  Thanks in advance for any response.

  You're right, you would be provided with the support of the guarantee. As for buying a warranty extended and if it will work the same, please contact Acer Store for more information about extended warranties.

  I would contact your company credit card for more information how their coverage works with electronic purchases. Only, we recognize and provide support in what concerns our guarantees.

• Newbie needing advice on the purchase of equipment to expand the range of WAG160N wireless

  Hello

  I'm new to the Board and I would like to ask a question in 'newbie '.

  What product to buy to extend the reach of my WAG160N wireless router?  Am I limited to Cisco products or bridge/Repeater of another manufacturer would work?

  I the main connection in a garage renovated (at the forward end of the House) at the bottom and unfortunately the signal falls severely on the floor and the back of the House there are some walls of concrete between the two.  The intensity of the signal in the children and the main rooms are not reliable and therefore acts of procedure of the family to "do something, Dad!"

  I have the possibility of a connection to local network of WAG160N, through the wall of a Repeater.  If so, what would be the most logical and hassle-free purchase (Cisco or otherwise)?

  Any advice would be gladly entertained as I want to do my research before hitting the stores.

  You can go for WAP4410N is the device that can communicate with the wireless router and can help you get the best range of wireless network.

• Alienware Aurora R4 MIO ALX Board question

  Hello everyone, I know that this subject and I am about to talk about problem has been discussed over and over again, but I have no where else to turn and do not know how to solve a problem, I have so I'll simplify as much as possible. So basically, I had a case of Aurora ALX of R4 and modified with the motherboard and custom components. I have done all the research before hand and found that particular mother that I would work with the alienware command center and mio Board. I ordered the case and motherboard off ebay I got someone who did the case and all the wires for a living it all for me. I got the case and after a few months rose money to put everything. I finished installing all the operating system (Windows 7 Home premium) all the drivers for the motherboard, my graphics card and set to update everything, including windows. The only problem I encounter is that fans are running high, I can't control the lights, or install Command Center, and the MIO Board is not displayed in my device manager its listed as an unknown device.  Here are the things that I've done so far to resolve the MIO Board.

  1 turn off the computer and removed the power cord then the power button which took place a minute with the power cord removed and plugged the power cord and back on my PC, then checked the Device Manager it says its installed driver software but its still listed as unknown.

  2. installed and reinstalled the command center twice, but doesn't not work or do anything, since the jury is not recognized, the software can't find it.

  3 opportunity Alienware software 32 bit Diagnostics to run the hardware test to see if the Board of Directors in the list it does not work.

  4. install a driver for Asus thermal control that I thought would fix a thermal error that appears in the command center, but did not.

  5. Finally, tried to change the usb cable that connects to the motherboard MIO Board via a header different usb then made power dissapation thing as described above and still no luck.

  So I'm a bit of ideas right now, I can't say if Miss me just one type of software/driver or if I need more recent or not. The Council is still fresh and is not bricked I know, due to the fact that the two lights on the MIO card are still on a bright blue LED one and LED light orange so. Also, when I unplugged the usb cable of the MIO card to the motherboard, fans are silent and all lights work but when I plug it in again and then fans are on max and the lights are out. Any advice/Input would be greatly appreciated.

  Specifications of the computer:

  CPU Intel I7 to 4.0 Ghz

  Motherboard Asus Maximus VII gene

  ASUS Nvidia Geforce GtX 950

  16 GB Corsair Ram revenge

  you posted in lastnight here 22:00, but I have not my notify til today. Bravo, you seem to have picked a winner & get your lights.

  When you have purchased your case & decided to install Windows on a hard disk, this 1st time you booted up, your lights should have at the same time you see your Bios screen & ejected from your dvd tray. Note There are no windows or drivers, just a simple interaction between your gross motherboard bios & mio Board. If I was to eject all my hard drives & turn on my pc, my lights will be lit, my mio Board 'works' without a hard drive. It is hard to say why your last Board was not, however the new works, let's get some software installed for it.

  When you started in 7, you might have kept an eye out in your bar to look for the driver past to install, possibly got a desktop "device driver installation" dialog box or similar, as your way of knowing. Since there is no clear indication in your device manager, you can select USB (& peripheral next HID), Action > search the hardware changes, see what he does.

  Whatever it is, it was me, I would then try to install CC 2.8.9; If the installation fails (error platform), copy / save your temporary files in the temp folder, it created, that you did the last time. When a CC install fails, Council MIO get flashed with the firmware, so spend 2.7 CC, see what happens.

  How should OK, I put it.

  Steps back one, pretend that I did not install 2.8.9. If your curiosity is not satisfied on the windows driver, you can disconnect mio usb, power up / power off, reconnect it shows your systray icon & driver dialog box to see if windows install this driver mio; It will take place without connection, next time he "sees", it it will reinstall the driver, which is the raison d'etre. From there, try installing 2.8.9. Consider this an optional step, if when, earlier you scanned for changes on the usb/hid equipment & 'nothing. '

  What I will say is just me speaking aloud. I noticed that you do not want to move to a CC under 2.6. However, if a version 2.5 recommended by Justin is what you end up with, but you do not want to go back so far (I suppose that you fear a brick flashing firmware), you can try this:

  • put power off, disconnect mio usb, turn on
  • install CC 2.5 hard disk, do not restart, shut down.
  • Reconnect mio usb, power up.
  • Look at your systray icon / installation of the Office driver mio dialog box.
  • launch CmndCntr 2.5, see if it 'works', lights change color, fans have cruise control manual etc.

  It is a workaround, you have installed CmndCntr without the IMU with the firmware flashing & you will be relying on the firmware, it has been flashed with advance by the last owner. If all goes well it is harmony & it all works. If you are satisfied, let it be. You are finished. If for any reason you are not satisfied that, later, you want to try to flash the jury, 2.5 CC to uninstall / reinstall, cross your fingers as we all do, simple as that.

  Note: turn off automatic updates of CC
  

  the tips here are to not allow an automatic update, for fear of a brick, do not allow

• Trying to upgrade from lightroom 5 to 6. Do not have a ser # for the 5 Lightroom. My lightroom 5 came as a 'bundle' with the purchase of a camera. When you install the downloaded lightroom 6 a message appears saying: can not find a product calling on

  Trying to upgrade from lightroom 5 to 6. Do not have a ser # for the 5 Lightroom. My lightroom 5 came as a 'bundle' with the purchase of a camera. When you install the downloaded lightroom 6 a message appears saying: he can't find a product calling it on my computer. My question is the "grouped" lightroom 5 calls be upgraded or why I have to by the full 6 Lightroom. Paul

  I THINK that the on-board version 5 is not eligible, but since I don't work for adobe, click on the link below, during the hours listed

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html