Satellite C660 - 1st PSC1SE - project ID verification fail while BIOS update 1.40

Similar Questions

• Satellite C660 - 1st Display Driver needed

  There is no screen for my laptop Satellite C660 - 1st PSC1SE driver?  :|

  Card NVIDIA GeForce 315 M was built in other laptop too.
  Try using the driver released for:
  -Satellite C640 PSC2YE
  -Satellite L730 PSK0CE
  -Satellite L735 PSK0CE
  -Satellite Pro C660 PSC1RE

• Satellite C660-1st - replacement of the cooling fan

  Hello

  I have a Toshiba Satellite C660-1st. Last days a cooling fan start working very noisy doesn t and cleanup help. I bought a new Toshiba L650 but it s not working do not. This laptop cooling fan seems same as from my computer, but the order of the wires in the plug is incorrect.

  Colors are the same so I tried to change order of the cables but it helps doesn t.

  Any ideas how I can fix the problem?

  >... a cooling fan started working very noisy
  How to understand this? Is noisy to say that the cooling fan can be defective and make a few strange noises or it works simply more often than before?

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite A500-17 x - micro does not work after BIOS update

  I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

  ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich

  Hello

  BIOS cannot be demoted in windows mode.
  Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

  By the way: I put t think the update of the BIOS assigned the microphone.

  Go to control panel of-> sound-> recording tab.
  Here you will see all the available recording devices (micro)

  Activate the microphone it (in this case the people with reduced mobility) and set its default value.

  Where it works: reinstall the audio driver.

• Satellite L50-A-160 does not start after the Bios Update

  Hi, first of all, this is first post.

  I have 2 satellite L50-A-160 with bios 1.1

  Problem: seems to go to sleep after a few minutes, even working on them (even with both)

  So, I found an updated version 1.9, downloaded and running on one of the laptops. the biosupdate tool found matching the BIOS and a race.
  In the middle of flashing, he fell asleep. turned on and not start. What can I do? Recovery options? I guess the same thing will happen with the other too...

  What is the problem with these computers?

  Besides; very poor battery, always shows 0% available and not charging...
  Does anyone have a solution?

  Best regards
  -always in the hope.
  GT

  Have you tried to change in Power Options?

  See screenshot and try to change the ones I marked (it can refresh the settings, just change the values) and see if this solves the problem.

  

  and for the other laptop with no boot, a laptop sleep by updating the bios will surely mess it.

  what I don't understand is why your sleep laptop BIOS update, as far as I know the sleep settings is active then on windows (since this is controlled by windows)
  He does not sleep while in the BIOS you leave 1 year, sleep settings active only after loading windows.

  have you tried to check the time of processor for your laptop? Maybe its overheating causing auto-off

• Satellite L30 - 14F - battery low CMOS and delivers after BIOS update

  For 1.5 years, I have a Toshiba Satellite L40 - 14F PSL4CE.
  I encounter the error of CMOS LOW battery but I was unable to find to replace. Where he is?

  Second problem: after a BIOS update (version of the site) with the same setting in Windows XP, after I left the lid downwards and then save the workbook hesitates for about 2 seconds and the music stops. These problems were not present before the BIOS update.

  Thank you for the cooperation.

  Hello

  The BIOS battery can be replaced by only authorized service. to do this the laptop everything must be dismantled. By the way: see s operating manuals. You will find info how to load the BIOS battery.
  If I remember correctly the laptop must be connected to the adapter sector more than 48 hours. Check in the manuals.

  Maybe is my bad English, but I do not understand second problem.
  Can you please try to explain it again? I'm sorry.

• Satellite C660 - core temperature reached 80 to 90 while playing games

  Hello guys.
  My heart temprature reached 80-90 degrees while im playing games like Counter Strike Source and have need for speed most wanted.
  Is there any solution that I can use to fix this?
  I have a Toshiba C660.

  4 GB OF RAM
  Processor i3
  2.40 GHz
  64 bit

  Best regards

  Nasim.

  CPU temperature increase always launch a game.
  Is nothing unusual because CPU creates a lot of heat dissipation.
  Try to clean the fan using a jet of compressed air
  Maybe it help is little

• Satellite Pro A100: Trojan warning message during the windows BIOS update

  Trying to update my Bios through windows, my anti virus (f-secure) has a crush on decompressing the zip file a warning.

  The warning pointed out that the folder contained a Trojan horse and that he had been cleared to protect my computer.
  A warning from microsoft also said that access to these files had been blocked to protect your system.

  Is it possible that this update, downloaded from Toshiba really contain malware or could there be another reason for this event?

  Advice for help would be appreciated

  Post edited by: james7dean I have a satellite pro a100 o/s windows xp pro

  Hi james

  Don't you panic! You BIOS are not affected by Trojans, Malware or viruses.
  For the most part these BIOS files are not known for anti-virus applications and, consequently, anti virus software reports and notifies a virus.

  Before you start the update of the BIOS, you must disable automatic virus protection!

• Tecra A3 - keyboard failed after BIOS update

  I updated the BIOS on my Tecra A3 with the package of 2, 30-VICTORY, and the keyboard has failed... Only a few touches of clam work and they do not even give the good sign... I guess that there must be a language problem or something?

  In any case... I can't go in the BIOS or my bootmenu because even the F2 and F12 keys does not work... The touchpad works very well though, if I Explorer win xp etc...

  How can I fix it?

  Hello

  did you buy this PC in europe or elsewhere in Asia (, USA)?
  If you provide your serial number, we can check if the machine is a European model. If it is not then maybe you have bad BIOS installed.
  If the machine still works as you describe, then it should be possible to download the correct BIOS (if it was the wrong) and install it. It requires only the basic operation of mouse.

  BR

  Tom

• Re: Satellite A135-S7403 does not pass the POST after BIOS update

  Hello

  I A135-S7403, I know it's old, but well, I worked until I installed a new version of Bios (1.90 for Satellite A130 (PSAD0U/PSAD3U) on the official website of Toshiba (here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1854878& rpn = PSAD0U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768663).)

  All installed no problem, but when I restart the laptop, it does not start.
  It freezes on screen with red writing "in touch with tomorrow TOSHIBA" and I can't do anything.
  What should I do? And why this official update broke down my computer?

  Hello

  Something has gone wrong with your update of the bios, this is why the Tower cannot start. Also, can you enter the Bios itself?

• Satellite A100-178 hangs at the STATION after the BIOS update

  Hello

  Recived my Windows Vista upgrade Moduslink yesterday. I followed the book on how to upgrade to Vista, and the first step was to update the BIOS to 5.10. The BIOS code was provided on a CD and I applied it by the book. Now my A100 will not boot. It s hangning to the beautiful red-logo Toshiba to the POST screen. The only button on the keyboard that responds is the ESC key. When you press the switches of the screen to the screen of detailed JOB. Just under the CPU information, he says that he has "no TPM or TPM has problem", there are information memory and "Press F2 to enter setup".
  Nothing happens more...
  Is there a smart way to reset or rollback BIOS? Please?

  Please excuse me if the English is bad...

  / Fredrik

  You are 100% sure that you used the good BIOS?
  Seems that you have used a wrong!

  Please check if your number of Satellite A100-178.
  That I remember that the laptop is a part of the PSAA9E series.

• Satellite U500 - 11G - noise of the fan speed after BIOS update

  Hello

  I have the Toshiba Satellite U500 - 11G.
  I've recently updated the BIOS because my CPU fan did not work under Ubuntu,
  But after the update, my CPU fan speed is faster then normal and make a lot of noise (even if the CPU is cool) when I use Windows 7 is still stay on fast speed making a lot of noise.

  Do we sort of degrading the BIOS or thw way to earn the slow CPU fan speed?

  Concerning
  Sagar

  Update BIOS because of Linux? You know that Linux is not possible on this laptop model?

  In any case, to reduce the fan sped Please reduce the cooling in saving settings method.
  Control Panel > Power Options > go to your preferred power plan settings and choose advanced power options > Toshiba saving settings > cooling method > set to optimized battery.

• Satellite A200-1FL asks for the password after the BIOS update

  Please answer who knows what to do.
  I have laptop SATELLITE A200-1Fl (PSAE6E).
  After the installation of update of the Bios (v1.7 12/10/2007 for x 64) my pc started to ask the password, I have never installed.

  I'm to tosh. out of warranty service center-useless.

  Hello

  Satellite A200's newest model of laptop and I can't believe as possible out of warranty. Please try to contact a few different FSA in your country. It should be clear somehow. If nothing is done please post again.