Bootcamp windows 7 el capitan
Hello
I tried to install windows 7 on my 15 "end 2011 MBpro. I use a USB stick with one. ISO file. All goes well until mac takes you to boot from USB, but there may be a USB bootable found. I tried EVERYTHING but nothing works. Tried different USB and nothing works. I spend more than 2 days on this, but noting works. Anyone who can help me?
What is the problem with your built-in optical drive?
Tags: Windows Software
Similar Questions
-
Unable to start bootcamp after partitioning El Capitan
Lonely HI T,
I recently partitioned the drive where is installed OSX El Capitan. Now, to press the Option key at startup to the top, I can't select my Bootcamp partition to boot.
Here's the info re: my product:
Here is some information about: my volumes:
- I have OSX installed on a partition 'Macintosh SSD' a 500 GB SSD
- The files are on a 'Macintosh HD' partition in a 1 TB HARD drive
- I have Windows Bootcamp installed on a "SOLID" NTFS partition in the same 500GB SSD
- and another NTFS partition for Windows files "LIQUID" in the same 1 TB HARD drive
- I also have a new partition (which lead to my problem) "ScratchDisk' in the same 500GB SSD
Also very "SOLID" and "LIQUID" NTFS partitions are currently read-only that is ' owners: disabled "in disk utility after creating a new partition"ScratchDisk"for Photoshop in the same 500GB SSD and SOLID will not show up to start up after pressing the button 'Option '.
I already had Tuxera NTFS installed but uninstalled.
Below you will find the following information:
- diskutil list
- Cs diskutil list
- sudo TPG - vv - r see the/dev/disk0
- sudo fdisk/dev/disk0
Thank you for the patience and kindness in advance,
CESCO
Last login: Tuesday, February 2, 23:22:10 on ttys000
Cescos-iMac: ~ list of the Cesco$ diskutil
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 500,1 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_HFS Macintosh 250,0 disk0s2 GB SSD
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: disk0s4 Apple_HFS ScratchDisk 99.2 GB
5: Microsoft data base SOLID 150,0 GB disk0s5
/ dev/disk1 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS Macintosh HD 899,2 GB disk1s2
3: Apple_HFS Recovery HD 650.0 MB disk1s3
4: Microsoft data base LIQUID 100.0 GB disk1s4
/ dev/disk3 (external, physical):
#: NAME SIZE TYPE IDENTIFIER
0: FDisk_partition_scheme * GB 500,1 DIS3
1: Windows_NTFS GB Seagate Expansion Drive 500.1 disk3s1
Cescos-iMac: ~ Cesco$
Cescos-iMac: ~ list of cs Cesco$ diskutil
No logical volume group CoreStorage found
Cescos-iMac: ~ Cesco$
Cescos-iMac: ~ Cesco$ sudo TPG - vv - r show/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168
See the TPG: / dev/disk0: PMBR to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 976773167
start index size summary
0 1 PMBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 488188328 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
488597968 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
489867504 193675024 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
683542528 262144
683804672 292968448 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120 15
976773135 32 table dry GPT
976773167 1 dry GPT header
Cescos-iMac: ~ Cesco$
Cescos-iMac: ~ Cesco$ sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-976773167]
02:00 0 0 0-0 0 0 [0-0] unused
03:00 0 0 0-0 0 0 [0-0] unused
04:00 0 0 0-0 0 0 [0-0] unused
Cescos-iMac: ~ Cesco$
Re: Unable to start bootcamp after partitioning El CapitanPlease after the release of
sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C
It will show you the first block of the SOLID wall.
-
USB 2.0 does not work in bootcamp Windows 10
Hello
I try to use my USB 2.0 USB drive on my MBP 13.3 "in bootcamp Windows 10 and it does not appear in windows Explorer. The USB key is displayed in the device however Manager. I tried my hard drive that is USB 3.0 and it works fine, but the USB does not work. I have tried many different solutions and none seem to work including physical relocation and replacing the USB name i.e. H: U:. In disk management, the device is there but says "no media" below.
Someone at - it suggestions as to how I can get the USB appear in Windows Explorer and access the files?
Bravo to all the answers in advance.
the device is considered that the format is not. In some cases shaped on the Mac in Fat32 or ExFat is not readable under Windows. Reformat the Windows Fat32 or ExFat Device Manager device, it will destroy the data and mount the drive. In turn the unit may become unusable which can occur over time.
-
Difficulties Bootcamping Windows XP
I just upgraded to a 1 TB HD on my Mac Mini early 2009. I had my previous HD, Bootcamped Windows XP, which is the only OS that runs an antique program I use to return to the top of my all as old Sharp Zaurus PDA. I want to maintain this capability, but my newly improved Mac Mini even will not accept the installation disk Windows XP Professional original, instead of this ejection after a minute or two without recognizing in the Finder. I would be very grateful for all of the useful ideas. Thank you.
Just install xp in oracles free virtualbox virtualmachine, it's a world easier
-
How (re) - add Apple keyboard to Bootcamp (Windows 7)
Hello, I've been running bootcamp windows 7 on iMac no problem for two years. It was wired apple keyboard (w / numeric keypad). Today it suddenly stopped working. It does not show as one of the screen "devices." I plugged on a MacBook, work very well. so the problem doesn't seem to be the keyboard itself. All devices plugged into USB work fine, it's not the USB ports. Also tried to add the wireless keyboard that came with the iMac does not recognize. Can anyone help? Thank you.
Hey there cl6120,
Welcome to the communities of Apple Support!
Let's take a moment and get the keyboard to work again, your Windows partition. I can imagine the challenge of computing without it! To ensure that your information is protected, it is always better to create a backup of the entire system. Find the steps detailed here:
Use Time Machine to back up or restore your Mac
Go ahead, this is an incredible resource that directs you to a resolution:
Use your Windows with Boot Camp Apple keyboard
More precisely...
If your keyboard does not work
When you use Bootcamp to install Windows on your Mac, it installs the Windows support software (drivers) that allow you to use the features of the Apple keyboards in Windows. If your keyboard works start from your Mac OS X but not of Windows, try to reinstall the Windows support software from the Boot Camp Assistant.
See you soon!
-
Hi all
I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display. Any help would be really appreciated! TY
The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.
Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .
1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?
Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.
For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.
-
I am a student with a MacBook Pro, and I need a Windows operating system to run software from the school. I can't afford a new ' puter, so I got to BootCamp Windows 7. Where can I get a copy?
Where can I still get Windows 7?
Full version - Microsoft Windows 7 Home Premium
Microsoft Windows 7 Ultimate - full version
Full version - Microsoft Windows 7 Professional
Microsoft Store:
http://www.microsoftstore.com/store/msstore/list/parentCategoryID.44066700/CategoryID.60521000
http://www.Microsoft.com/student/en-us/products/Windows/default.aspx
If you're in College, you can also check your Campus for a greatly reduced copy Bookstore.
-
El Capitan 10 BootCamp Windows does not restart in windows install
MacBook pro (mid-2015) 15 "i7 2.5 16 GB of ram running OS X El Capitan 10.11.4
After installing windows (download from Microsoft) 10 per boot camp, he didn't restart windows install, just run OS X, BOOTCAMP partition exists, but it's just blank, even trying to hold 'control' even if there is no drive restart it to another macintosh
and here's the output for "diskutil list" Terminal and "diskutil list sc.
Perform the following two procedures and restart your Windows installation.
Reset the management system (SCM) controller on your Mac - Apple Support
-
Long story short, I installed windows 8.1 using Bootcamp, went very well. I was just curious how it would go.
in any case, tonight, I decided to delete the Windows partition (Bootcamp Partition), and I got an error in Bootcamp that says "sorry couldn't do Mac OS partition a new»
With that I went to the disk utility and tried to partition the disk on a partition again, which it did, but now I have 40 GB of "other space". I literally have nothing stored on this computer, until I installed Windows 8.1 which was not there.
Also, when I start it up I always get Windows start first if I do not hold Option, then it goes to the blue screen, obviously because he's not here.
I started to recover, tried to fix it, verify, erase free space, etc.. I'm running a MacBook Pro 13 "128GB 2015.
On a Mac of 2015, the disc is divided into a group of logical volumes and Volume for OS X, and a partition for Windows. If BCA fails to restore it correctly, the part of Windows do not get properly gathered in the LVG/LV. The other questions you have, it's that there are remnants of the Microsoft your EFI partition Boot code.
To solve both, the easiest and safest method is
1 backup OSX and all of your files - use Time Machine to back up or restore your Mac - Apple Support .
2. boot into Internet recovery (CMD + Opt + R) - OS X: on OS X Recovery - Apple Support .
3. click on Utilties-> disk utility and erase your entire internal drive.
4. restoration of OSX and your files - use Time Machine to back up or restore your Mac - Apple Support .
This requires another external drive that can accommodate TM backup - backup disks that you can use with Time Machine - Apple Support .
-
First of all, thanks for all the help I get. I upgraded a couple of days to ELC. After that, the boatman partition disappeared. I managed to get bootcamp to be visible again in the Finder with a reconstruction of my GPT4. But when I try to rebuild my MBR, I see only 3 partitions and non of them are the bootcamp partition. Here are the results of the different queries can help the expert here what I'm doing wrong.
My mac is a 2010 MBA.
sudo fdisk/dev/rdisk0
Password:
Disk: geometry / dev/rdisk0: 14751/255/63 [236978176 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 0 0 2 - 25 127 14 [1-409639]
2: AF 1023 254 63 - 1023 254 63 [409640-174512312] HFS +.
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [174921952-1269536]
04:00 0 0 0-0 0 0 [0-0] unused
Sabri-MacBook: ~ bb_504$ sudo TPG - r - vv show/dev/rdisk0
See the TPG: / dev/rdisk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176
See the TPG: / dev/rdisk0: MBR suspicious to sector 0
See the TPG: / dev/rdisk0: Pri GPT to sector 1
See the TPG: / dev/rdisk0: GPT Sec at sector 236978175
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 174512312 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
174921952 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
176191488 60786655 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
236978143 32 table dry GPT
236978175 1 dry GPT header
sudo gdisk/dev/rdisk0
Password:
GPT fdisk (gdisk) version 1.0.1
WARNING: Open with shared lock devices will not have their
table partition automatically reloaded!
Scanning partition table:
MBR: hybrid
BSD: absent
APM: absent
TPG: present
Found a valid GPT with hybrid MBR; using GPT.
Command (? for help): P
Disk/dev/rdisk0: 236978176 sectors, GiB 113.0
Logical sector size: 512 bytes
Identifier (GUID) of disc: 00005B53-75AE-0000-2978-0000C1210000
Partition table contains up to 128 entries
First usable sector is 34, last usable area is 236978142
The partitions will be aligned with the boundaries of sector 8
Space free total is 6 sectors (3.0 KiB)
Starting number (sector) end (sector), Code name of size
409639 40 1 200.0 MiB EF00 EFI system partition
2 409640 174921951 83.2 giB customer AF00
3 174921952 176191487 619.9 MiB AB00 Recovery HD
4 176191488 236978142 Microsoft giB 0700 29,0 base data
Command (? for help): R
Recovery/processing command (? for help): O
Size of the disk is 236978176 sectors (113.0 GiB)
MBR disk identifier: 0x0000121F
MBR partitions:
Code of State sector Boot start end sector number
1 1 409639 primary 0xEE
2 409640 174921951 primary 0xAF
3 174921952 176191487 primary 0xAB
1 Please after the release of
sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C
2. using the 'o' command 'r' menu shows you the current MBR (that matches your output of Fdisk). Two of them contain 3 entries. When you use the command 'h' and provide the list of partitions to Gdisk, it will build a new MBR to match your GPT based on what you provide in the partition list. Please see No Bootable Device Error - early 2014 Macbook Air for example.
-
(Bootcamp) Windows 10 becomes black and restarts on bootcamp
After installation of Windows 10 on bootcamp and navigation just normally as any other people would, after 10-15 minutes my screen suddenly goes black and restarts...
While it has been restarted, blue "windows" sautéed as usual and points to bicycle in a circle turns on for a few seconds and then it crashes, restarts again...
At this point I keep restarting and then it comes to auto repair, that I then used Safe Mode to get in which worked but I could not do much with it because she persisted again after the reboot.
Side note: I reinstalled windows bootcamp 10 a bunch of time trying to solve every single problem, why it worked... even searching it up on top of google... Still no hope...
Help, please!
Data sheet:
iMac (21.5 inch, at the end of 2013)
Intel Core i5 at 2.7 GHz
8 GB 1600 MHz DDR3
Macintosh HD
Intel Pro Iris 1536 MB
El Capitan 10.11.5 running (15F34)
Thank you
Please see 10 crashing Windows, but don't know why. The question is usually associated with Windows Installer an invalid Intel GPU driver.
-
Hello
I have a 27 "iMac late 2015, retina - 5 k, bought a few months ago and El Capitan (OS X 10.11.5) running
I recently bought a 10 Windows in order to create a dual boot. Of course, as I write here, it did not work.
I tried everything I could.
First, using the key provided with the Win10 USB I created an ISO. I placed this ISO on another USB drive and follow the instructions in using BootCamp I would get an error in this direction: BootCamp does not install, there was not enough space to create a partition. -Obviously I have a lot of space.
Secondly, I copied the ISO on my desktop and restarted the process. Same result.
Thirdly, I downloaded an ISO Win10 of MS, placed on the desktop and restarted the process. In this way, BootCamp has been able to create a partition and the computer restarts and you are prompted to install windows. After inputing the windows product key, I chose the "BOOTCAMP", formatted drive (to be noted that the name has changed), selected it and after hitting "Next", I get an error something like this: we could not create a new partition or locate an existing one. For more information, see installation logs.
Any suggestions?
1. use the ISO downloaded from Microsoft. It should be an ISO only 64-bit. It cannot be mixed.
2 put the ISO in the Documents folder and do not.
3. disconnect the external storage and perform the following two procedures.
Reset the management system (SCM) controller on your Mac - Apple Support
How to reset the NVRAM on your Mac - Apple Support
4. run the wizard of BC and try to install Windows.
5. Please visit https://help.apple.com/bootcamp/assistant/6.0/#/bcmp173b3bf2 for the detailed steps for your model. Your model does not use the USB for Windows installation, and does not support the creation of a Windows USB Installer. Do not change the file info.plist Bootcamp to create a workaround solution. It will cause other problems.
Please see also
Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Supportfor reference.
-
Bootcamp/windows 10 Pro installation process fails
Machine: MacBook Pro (retina, 150inch, Mid2015)
El Capitan, 10.11.4
Processor 2.8 GHz 16 GB Mem
New MacBook with an instance of Time Machine saved from previous MacBook Pro
Trying to install fresh Windows 10 Pro 64-bit image on a new 130GB partition created by Bootcamp.
- I ran bootcamp.
- Bootcamp Assistant downloads the drivers Windows and 'medium '.
- Bootcamp Assistant creates the disk partition, and then switches to Windows (no need USB), Windows.iso image is very good by Bootcamp.
- "Windows Setup" starts its thing.
- Screen 1: I am asked to confirm the installation, and accept the license.
- Screen 2: I enter my license key Pro 10 MS Windows in the form of xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
- Screen 3: not below, program installing Windows says "no images available.
The Windows Installer will not leave here, and I interpret that as he cannot locate a disk image for installation of.
I searched these forums a bit to find answers. I tried to copy the file Windows.iso on an external USB drive and that the selection as the source image and even the achievement of results as shown above.
I looked at the menu "Actions" in the Bootcamp Assistant and that the only available element is 'Download Support Windows software' or something similar. I did and saved a folder on my Mac desktop, but it is nothing new.
I have reset the PRAM with Cmnd-Option-P-R and the MSC with the Shift-command-Option-Power button. Once again nothing.
Between each attempt, I'm in the Bootcamp Assistant and remove the Windows Partition of my drive.
If anyone knows why the Windows Installer cannot find the ISO file or what steps I must take to install Windows Pro 10, I should be grateful if you would hear about it.
Thank you.
Followed, after contact Apple support, by sending in diagnosis and return just GENERALS of Apple engineers... I did a thorough cleaning of my PowerBook. Using the command-R during restart, started in Recovery Mode or what it's called, used the disk utility, wiped and formatted the drive. Made a new fresh install of OS X el Capitan. Updated. THEN, I installed Windows with BootCamp Assistant. The process worked. My hunch is that use Time Machine to power my new machine was the culprit. I am betting that Time Machine copied on the parameters of my previous machine (a mid-2011 Powerbook), on this new Powerbook from 2015. That's the only difference. So it is now resolved.
-
10 with Bootcamp Windows Bluetooth driver
Hello
I have an iMac 27' end 2012, running El Capitan.
I recently installed 10 Windows on Bootcamp, and everything went well.
Except for one thing:
No matter what I do, I can't get the bluetooth running module.
Specifically, its called "Bluetooth USB Host Controller."
Code 28 drivers were not installed. There is no compatible driver.
I tried the drivers 5.1.5621 and 5.1.5722 Bootcamp.
I even tried with handle of the driver file by adding the hardware ID.
I even tried to kb.parallels AppleBluetoothBroadcomInstaller64.
It of pretty sad, I think, because the reason why I wanted Windows 10, was that the two bluetooth headsets I tried to pair it with Windows 7, did not work.
I tried many things, including the various drivers, external bluetooth software. no stable solution possible, even if the keyboard and magic mouse worked perfectly. specifically, I tried the bh111 of sbh20 and nokia sony.
And another funny thing: Apple Magic Mouse and keyboard work fine with Windows 10 (with the exception of the magic mouse scrolling feature).
I've read other threads. Basically, the message was: "we will have to wait for the next apple bootcamp drivers."
Appreciate any help.
Update:
I found a way, how you can install the driver.
You first clear the application of digital signature
Then you manually change the driver Bootcamp Bluetooth (AppleBluetoothInstaller64)
Bluetooth host controller driver does not work
Well... I could pair my bluetooth headset. BUT... the quality of the sound is horrible, and he blames a delay and delays.
Any help would be good.
-
Start Windows with El Capitan upgrade and now OS advantage!
Hello:
I had Windows 7 installed on bootcamp and run without a hitch. With the upgrade to El Capitan, the entire partition and Windows startup option disappeared.
I tried to correct it and could see the Windows partition with option for (by pressing Option at startup to the top), but the error I get is now that the operating system is missing.
Here are the steps that I followed to solve the initial problem:
1. This is the result of the following commands:
Cs diskutil list
sudo TPG - vv - r see the/dev/disk0
sudo fdisk/dev/disk0
--------------------------------------------------------------------------------
Cs diskutil list
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group F7087A6A-CC59-4D01-8236-EEE7F2CD70BE
=========================================================
Name: Macintosh HD
Status: online
Dimensions: 430789959680 B (430.8 GB)
Free space: 18948096 B (18.9 MB)
|
+-Physical volume EE4F25E0-6F1A-4579-BFAE-43B1E8F150A1
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 430789959680 B (430.8 GB)
|
+--> Logical volume family 7BC7C103-E99B-4258-B349-16A6F81853C0
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume DB39C2E3-FD65-40AF-AECD-C5426AFE2F73
---------------------------------------------------
Disc: disk1
Status: online
Size (Total): 430418690048 B (430.4 GB)
Reversible: Yes (no required decryption)
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
--------------------------------------------------------------------------------
sudo TPG - vv - r see the/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060
See the TPG: / dev/disk0: MBR suspicious to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 977105059
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 841386640 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
841796280 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
843065816 16852520
859918336 117186560 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
977104896 131
977105027 32 table dry GPT
977105059 1 dry GPT header
--------------------------------------------------------------------------------
sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 60821/255/63 [977105060 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >
2: AC 1023 254 63 - 1023 254 63 [409640-841386640] < unknown ID >
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [841796280-1269536]
* 04:07 1023 254 63-1023 254 63 [859918336-117186560] HPFS/QNX / TO THE
--------------------------------------------------------------------------------
2 installed gdisk
--------------------------------------------------------------------------------
sudo gdisk/dev/rdisk0
GPT fdisk (gdisk) version 1.0.1
WARNING: Open with shared lock devices will not have their
table partition automatically reloaded!
Scanning partition table:
MBR: hybrid
BSD: absent
APM: absent
TPG: present
Found a valid GPT with hybrid MBR; using GPT.
Command (? for help): P
Disk/dev/rdisk0: 977105060 sectors, GiB 465.9
Logical sector size: 512 bytes
Identifier (GUID) of disc: 7F7B7C2C-D4E1-463A-A358-C48DC4D06309
Partition table contains up to 128 entries
First usable sector is 34, last usable area is 977105026
The partitions will be aligned with the boundaries of sector 8
Space free total is 16852657 sectors (8.0 GiB)
Starting number (sector) end (sector), Code name of size
409639 40 1 200.0 of MiB EF00 EFI system partition
2 409640 841796279 401.2 giB AF05 Macintosh HD
3 841796280 843065815 619.9 MiB AB00 Recovery HD
4 859918336 977104895 55.9 giB 0700 BOOTCAMP
Command (? for help):
--------------------------------------------------------------------------------
3 installed TestDisk
--------------------------------------------------------------------------------
TestDisk 7.1 - WIP, utility data recovery, February 2016
Christophe GRENIER <[email protected]>
/ Dev/rdisk0 - 500 GB of disk / 465 GiB - 977105060 sectors (RO)
The hard drive (500 GB / 465 GiB) looks too small! (< 560 GB / GiB 521)
Check the size of the hard drive: HD jumpers, BIOS detection...
The following partitions cannot be recovered:
Start end partition size in sectors
> Data 977104895 1094291454 117186560 MS
Mac HFS 977105020 978374555 1269536
[Continue]
NTFS, blocksize = 4096, 59 GB / 55 GiB
--------------------------------------------------------------------------------
2 screen after [continue]
--------------------------------------------------------------------------------
TestDisk 7.1 - WIP, utility data recovery, February 2016
Christophe GRENIER <[email protected]>
/ Dev/rdisk0 - 500 GB of disk / 465 GiB - 977105060 sectors (RO)
Start end partition size in sectors
> system EFI P 40 409639 409600 [EFI System Partition]
D Mac HFS 409640 841071143 840661504
Data SM 709029896 843067392 134037497 D
D Mac HFS 841796280 843065815 1269536
Data SM 843067392 977104888 134037497 D
Data SM 859918336 977104895 117186560 D
D Mac HFS 975835488 977105023 1269536
Structure: Ok. Use up/down arrows to select the partition.
Use the arrow keys left/right to CHANGE the characteristics of partition:
P = primary D = deleted
A: keys Add partition, L: load backup, t: change the p-type: list of files.
Enter: continue
FAT32, blocksize = 512, 209 MB / 200 MiB
--------------------------------------------------------------------------------
P (list of files on the MS Data 843067392 977104888 134037497)
--------------------------------------------------------------------------------
TestDisk 7.1 - WIP, utility data recovery, February 2016
Christophe GRENIER <[email protected]>
Data 843067392 977104888 134037497 MS
Directory /.
> dr-xr-xr-x 0 0 0 14 - Sep - 2015 14:23.
Dr-xr-xr-x 0 0 0 14 - Sep - 2015 14:23...
Dr-xr-xr-x 0 0 0 15 June 2015 07:02 $Recycle.Bin
Dr-xr-xr-x 0 0 0 9 August 2015 17:49 WINDOWS $. ~ BT
Dr-xr-xr-x 0 0 0 9 August 2015 17:49 $Windows. ~ WS
Dr-xr-xr-x 0 0 0 9 August 2015 start 19:33
Dr-xr-xr-x 0 0 0 15 June 2015 07:10 Intel
Dr-xr-xr-x 0 0 0 16 June 2015 01:44 MSOCache
Dr-xr-xr-x 0 0 0 14 July 2009 12:20 PerfLogs
Dr-xr-xr-x 0 0 0 20 July 2015 16:50 Program Files
Dr-xr-xr-x 0 0 0 9 August 2015 16:23 Program Files (x 86)
Dr-xr-xr-x 0 0 0 16 June 2015 01:45 ProgramData
Dr-xr-xr-x 0 0 0 15 June 2015 07:02 recovery
Dr-xr-xr-x 0 0 0 1 - Sep - 2015 22:29 System Volume Information
Dr-xr-xr-x 0 0 0 15 June 2015 07:08 users
Dr-xr-xr-x 0 0 0 12 August 2015 15:02 Windows
-r - r - r - 0 0 8192 15 June 2015 14:50 BOOTSECT. BAK
-r - r - r - 0 0 2056 15 June 2015 07:10 RHDSetup.log
-r - r - r - 0 0 383786 November 20, 2010 21:40 bootmgr
-r - r - r - 0 0 12812939264 14-Sep-2015 21:20 hiberfil.sys
-r - r - r - 0 0 17083920384 14-Sep-2015 21:20 pagefile.sys
Next
Use the change directory, h to hide the Alternate Data Stream
q to quit,: to select the course file, a to select all files
C to copy the selected files, c to copy the current file
--------------------------------------------------------------------------------
What are the measures taken subsequently.
A NEW TERMINAL WINDOW.
--------------------------------------------------------------------------------
sudo gdisk/dev/rdisk0
Password:
GPT fdisk (gdisk) version 1.0.1
WARNING: Open with shared lock devices will not have their
table partition automatically reloaded!
Scanning partition table:
MBR: hybrid
BSD: absent
APM: absent
TPG: present
Found a valid GPT with hybrid MBR; using GPT.
Command (? for help): P
Disk/dev/rdisk0: 977105060 sectors, GiB 465.9
Logical sector size: 512 bytes
Identifier (GUID) of disc: 7F7B7C2C-D4E1-463A-A358-C48DC4D06309
Partition table contains up to 128 entries
First usable sector is 34, last usable area is 977105026
The partitions will be aligned with the boundaries of sector 8
Space free total is 16852657 sectors (8.0 GiB)
Starting number (sector) end (sector), Code name of size
409639 40 1 200.0 of MiB EF00 EFI system partition
2 409640 841796279 401.2 giB AF05 Macintosh HD
3 841796280 843065815 619.9 MiB AB00 Recovery HD
4 859918336 977104895 55.9 giB 0700 BOOTCAMP
Command (? for help): D
Partition number (1-4): 4
Command (? for help): N
Partition number (default 128-4, 4): 4
Everything first in the sector (34-977105026, default = 843065816) or {+ -} {KMGTP} size: 843067392
Last sector (843067392-977105026, default = 977105026) or {+ -} {KMGTP} size: + 134037497
The current type is ' Apple HFS / HFS +'
HEX code or GUID (L to view codes, entry = AF00): 0700
Changed type of partition to "Microsoft Basic data."
Command (? for help): q
sudo gdisk/dev/rdisk0
Password:
GPT fdisk (gdisk) version 1.0.1
WARNING: Open with shared lock devices will not have their
table partition automatically reloaded!
Scanning partition table:
MBR: hybrid
BSD: absent
APM: absent
TPG: present
Found a valid GPT with hybrid MBR; using GPT.
Command (? for help): R
Recovery/processing command (? for help): O
Size of the disk is 977105060 sectors (465.9 GiB)
MBR disk identifier: 0x3F3EA8FD
MBR partitions:
Code of State sector Boot start end sector number
1 1 409639 primary 0xEE
2 409640 841796279 primary 0xAC
3 841796280 843065815 primary 0xAB
4 * 859918336 977104895 0 x 07 elementary school
Recovery/processing command (? for help): H
CAVEAT! Hybrid MBRs are flaky and dangerous! If you decide to not use one,
Simply press enter at the prompt below and your partition table MBR will be
be intact.
Type one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in order: 2 3 4
Partition of EFI GPT (0xEE) place first in the MBR (good for GRUB)? (Y/N): Y
Create entry for the #2 GPT partition (partition MBR #2)
Enter a hex code MBR (default AF):
Set the bootable flag? (Y/N): N
Create entry for the #3 GPT partition (partition MBR #3)
Enter a hex code MBR (default AB):
Set the bootable flag? (Y/N): N
Create entry for the #4 GPT partition (partition MBR #4)
Enter a hex code MBR (default 07):
Set the bootable flag? (Y/N): Y
After that, I had the option of Windows start show on the charger of bootcamp, but no operating system (Windows) is available. Any help with this would be welcome. Thanks in advance.
O.T.
Maybe you are looking for
-
Generation of LabVIEW Code Fix cannot run
I'm using LabVIEW 2011. I try to use DAQmx support for generating a pulse of my USB-6259 signal. LabVIEW jumped out an error message 'Generation of LabVIEW Code cannot run. I try to reinstall LabVIEW 2011, but the error is still there. Help, please
-
I just got a X 2 desire and I am experencing a problem with sound. After some time, it will stop working. I tried to play music using a variety of different applications, including Itunes, Windows 8 music etc and nothing comes out. The sound is not m
-
Hello Please see the attached photos. failed.jpg showed that the system could not start when a device is slot in slot13 OK.jpg showed that the system is properly start. No device is inserted between slot13 to slot17. 1. place a PXI (PXI-8433/4, PXI-8
-
Voice, outgoing calls PAP2T problem
Hi all I have a pap2t voip adapter and a lot of problems. Here's the situation. In our office, we have a linux box that acts as a router, iptables configured by shorewall. Connected to the linux box is the lan internet. After a difficult time, I fina
-
I have Windows Vista cannot connect to internet.
I can't connect to the internet via my Windows Vista computer. I'm going to use my computer laptop girls to send it. I get a message saying, for example,www.siteadvisor.com is not set up to establish a connection on port "World Wide Web service (HTTP