Similar Questions

• keyboard language was changed after upgrade to 10.11.5

  After upgrading to El Capitan 10.11.5 I could no longer connect to my MacBook Air using the password. However, after a hard reboot, I could, but the computer will not accept my password, for example, the installation of an application. It would work only to restart the computer. Finally, I noticed that the keyboard language changed to English, which is probably why some characters my password was not entered correctly. Has anyone else had the same problem?

  To make sure that various keyboards are available for the connection, you can go to the prefs system/users and groups/connection options and tick the box to display the menu before when connecting.

• Qosmio X 500-10T: what setting should I change after upgrade SSD?

  Hello community,

  I'll upgrade my Qosmio X 500-10T (currently with two 512 GB drive HARD, although only has data on it) with a Samsung 840 series 256 GB 2.5 in SATA SSD Pro and then perform a new installation of Windows 8.

  My question: what settings should I change once the switching plate?

  I think there may be some settings in the BIOS that may need to be changed.

  Also, it is recommended to remove the second HDD due to possible performance issues along the SSD?

  Are the drivers on the windows-compatible laptop computer support page 8?

  P.S. I read on UEFI, is there a way to update/upgrade existing in UEFI BIOS?

  I know it's a lot of questions, but any help is appreciated.

  Thank you

  Hello

  > My question: what settings should I change once the switching plate?
  > I think there may be some settings in the BIOS that may need to be changed.

  Usually, you do not need to change anything in the BIOS.

  > Also, it is recommended to remove the second HDD due to possible performance issues along the SSD?

  You may notice poor performance while moving or copying data from the SSD hard drive or SSD HARD drive.
  but to think that you can keep the HARD drive in the 2nd Bay for other files.

  > Are the drivers on the windows-compatible laptop computer support page 8?
  Do you think that some drivers Win 8 there?
  If so, they are...
  otherwise, you can try some Win 7 drivers in the frame to win 8

  > . I read on UEFI, is there a way to update/upgrade existing in UEFI BIOS?
  If you're going to see an update of the BIOS for the Qosmio X 500 with a serial number 6. XX or later version, then it would be a version of BIOS released to win 8 too

• vCenter host name does not change after upgrade to different to host

  Hello

  Yesterday I've updated vcenter server 5.0 to 5.1 in my lab environment. everything goes well, I faced some problems after the upgrade to 5.1. Below the questions I met

  1 vcenter service is stopped - solved by stopping Server vcenter 5.0, because my SQL Server must always connect to my server vcenter 5.0. Basic Upgrade to 5.1

  The host name of vcenter 5.0 is vcp.lab.com

  2 vcenter 5.1 host name is vcp5.lab.com, when I connect to vcenter server with the host name or IP address still shows the old vcp.lab.com at the top of the console to vcenter

  How to solve this kind of issue. Is there any problem with certification because I copied the secure channel to the server vcp5 Server certification.

  Go to the menu Administration-> vCenter Server settings-> the run settings and type the name of the new server vCenter on vCenter Server Name.

• Internet Explorer icon changed after upgrade

  Hello

  On this same laptop, I recently did an update to Internet Explorer v6 to v7.

  Now, the menu Programs icon changed - go white-ish - a requiring file open with program (not sure of the description for this)

  Do you know if I could go back/fix this? IE icon should be a 'blue letter e '...

  Kind regards.

  You can send a screenshot? I mean for a better understanding.

• Re: Changed after update personal account number

  Personal account changed after upgrading from Virtualstore and now I can not connect with my current account information. Changed 35482 to 35555

  Hello

  Yes, it's the resting point of account you can now register again using the new password.

• PC Companion changed language after upgrade

  I have a Xperia Z and PC Companion in Swedish. After upgrade PC Companion, the language has changed. It looks like the Turkish.

  Tried to uninstall and reinstall but the result is the same.

  Yes!

  The Swedish language works now.

  You will need to uninstall the old version, reboot your PC and then install the new version.

• Brightness changes not at all after upgrade windows 8.1.

  SVE14A27CXH

  Brightness only changes not at all after upgrade windows 8.1.

  Hi OT7!

  You can check this page to update the Vaio update software, you also try to turn off the screen brightness auto set by referring to this page.

  -Tim

  If my post answered your question, please mark it as "accept as a Solution.

• Import old box Inbox and sent in the Mail after upgrading to El Capitan

  There has been much discussion about the e-mails lost after upgrade to El Capitan, but I have not seen this particular question.

  I discovered that, like many others, all emails in my Inbox and in my sent folder to leave before the upgrade had disappeared. The issue has not affected the emails I had moved to folders.

  Open the mail library file (in the Finder, hold down the Option key selecting go to the top menu and the library appears), I discovered that Mail was created a new file V2, account, while the old one, V3 (created in 2013), sitting next to her. Go by the size files, it seems fair to assume that the V3 still contains my "lost" emails

  So, I don't know if the bug is that a new V2 should have been created at all, or is it a sync error, or something else. What I know is that when I try to import the items from Inbox and sent from the V3, I get an error message telling me that no mbox valid was found. This is patently false.

  I also tried to copy on an external hard drive, gave them a different name, but even then I couldn't import them. Reconstruction did not help either.

  Anyone able to help? I have a few crucial e-mails out there, and I try to avoid the upgrade...

  

  Address postal (El Capitan): import or export the mailboxes

• Problem with the mapping of the keyboard after upgrading to Fusion 7

  Hello

  I noticed that the keyboard layout has changed in the comments after the upgrade to VMware Fusion version 6 to version 7, even if nothing has changed in the settings "Region and language" in comments Windows 7.  Keys that have changed are "------' with ' < ' and ' | ' with ' > ' everything is OK. The keyboard is configured in Italian

  All the world has noticed the same problem?

  Have you solved?

  Thanks in advance.

  The problem has been resolved by the technical support of vmware with a workaround. They know that the question on the keys is interchangeable in the VM after upgrade to Fusion 7.

  Their development team is currently working on this issue on the priority. This will be fixed in the next update.

  However, they have a work around for the problem of keyboard. Following the instructions below to map the key manually in VMware Fusion.

  : Note make a note of the interchangeable keys in Windows before you enable the mapping of the keys.

  1. click on VMware Fusion-> preferences-> keyboard & mouse-> mappings of keys

  2. make sure that 'Enable key mappings' is enabled

  3. click on '+' sign at the bottom

  4. press the key that you want to send from the text box Mac keyboard

  5. press the key you want to receive on the VM in text box

  Note: You can also use the combination of change, control, Option, command if necessary.

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• Photostream not working after upgrade to Sierra

  I noticed after upgrading to Sierra, that my photo stream on the Macbook no longer works.

  When I connect to www.icloud.com I see that there are new photos downloaded from my iPhone to the iCloud, but not to my Macbook, no news pictures showed in Photos on my Mac. I tried login/out my iCloud on the Macbook and the iPhone account, but nothing has changed.

  Any ideas on how to solve this problem?

  Start by providing details

  What are your parameters to iCloud every IOS device on your Mac and if you use iCloud library what his status on each device

  Your message is confusing - you cannot see or access MyPhotoStream on the icloud.com - on iCloud.com/Photos see you iCloud photo library photos only - and if a device has not finished to upload to ICPL it downloads pictures

  So to help, we need to know what services you are using and what their status is

  LN

• Trackpad MacBook Pro late 2011 does not not after upgrade

  I just update the OS in my MacBook Pro (late 2011) which worked perfectly well 'El Capitan' to 'Sierra '. Everything went, smooth and pleasant. but now, the trackpad is completely erratic, is in itself (such as move and open programs like possessed). I tried several suggestions from apple such as checking for updates, check the settings, delete all the gestures, etc. I'm assuming that the material is very well that was perfectly fine yesterday... any suggestions please help.   -Note; I have to use an external mouse, and the latter is very well.

  Hello Med_,

  Thank you for using communities of Apple Support. It is my understanding that after upgrading to Sierra, your MacBook trackpad has become erratic. I know that my trackpad is an important part of my daily use, I can certainly understand your concern. I'm here to help get this resolved with you.

  You did an excellent job so far! Then I recommend the system management controller (SMC) reset. This system can solve some unexpected behaviors. Follow the steps below:

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Reset the management system (SCM) controller on your Mac.

  If the problem persists, test this problem in safe mode. This will allow you to exclude the software as the cause. To help get started in safe mode and additional steps, use the steps and the link below:

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

  See you soon!

• Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

  Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

  I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

  Nice day.