Bridge CS4 does not start

Similar Questions

• Adobe Bridge CS6 does not start.

  Adobe Bridge CS6 does not start. I installed it in Photoshop CS6, but Bridge does not start in my profile of 'owner '. (Photoshop works very well). However, when the reinstalled via a new profile of the administrator, bridge works. Any ideas why it won't work in the profile owner? Any suggestions on how to solve the problem? Support Adobe says it's a problem with Windows 7, but there is speculation on the Web that this is due to the installation of Bridge CS6 while Bridge CS2 remains installed on the PC.

  Found the answer - go - go to the process - task manager find Bridge cs6 - click on end process. Bridge works now - I need to do this each time that... (win 7 64 bit) :)

• AE CS4 does not start on the Multi-Core system

  I use an older version of After Effects (AE CS4).  I recently built a new job which is bootable in different choices of multicore (up to 40 cores).

  I can start AE CS4 on the configs of start up to 16 cores.  But above all that, AE CS4 does not start.  It will not even appear the start screen (but the AfterFX_32.exe process appears in Task Manager).

  I was wondering if it is possible to get the AE CS4 to work on configs with more than 16 cores?

  Thanks for all the ideas!

  N ° there is no way because at the time operating systems did not use more hearts and thus the libraries underlying system down to the C/C++ code can not handle.

  Mylenium

• Bridge CS4 does not open. NEF files in camera raw

  It is said because photoshop CS4 does not recognize this file type. I opened a lot of Nikon. NAVE in Bridge files. The difference is this is a file of D90 and I get files D80. Y at - it a patch for newer models?

  You can set an option to open jpeg and tiff in camera raw (preferences edit/camera raw).

  On a Mac, I don't know which directory it should be in.  To see what is there open Help / about plugins / camera raw in Photoshop, then check what version is displayed.  There should be only one.

• DW CS4 does not start

  I am using DW CS4 and have been for many months with no problems - Version 10.0/Build 4117. All of a sudden it does not start, when I click on its icon I see the big green DW block and then a notice from Microsoft stating that Dreamweaver CS4 has stopped working - a problem... and the only choice I have is to close the program. I restarted my computer and tried again, without success. The program resides in my Program Files/Adobe folder on my C: drive.

  Bad, I need the program for the work I do. I've added no new software to my computer lately--at least none that I know.

  
  Any suggestions?

  Joe

  A similar problem existed with Dreamweaver CS3, but was supposed to have been fixed in CS4. It of a long shot, but worth a try...

  Rename the folder that contains the site that you worked last and see if Dreamweaver starts correctly. If this is the case, look in the site, you have disabled to see if any file is 8 KB (8192 bytes) or an exact multiple of it. If so, it supprimer delete site, rename the folder to its original name and restart Dreamweaver. If DW starts successfully, the bug 8 192 is back.

  However, as I say, it should be fixed in CS4. The other thing to try is rename your personal configuration file. On Vista, it is located in C:\Users\\AppData\Roaming\Adobe\Dreamweaver CS4\en_US\Configuration. This is a hidden folder, so you must enable hidden in Windows Explorer folders. Rename the Configuration_old folder and launch Dreamweaver. It should create a new Configuration file with the default settings.

• Bridge CS4 does not detect my camera Nikon D800, impossible to download the RAW files

  Hello

  I could download my RAW files, until I upgraded to El Capitan and now my Bridge CS4 can not detect my Nikon D800, I'm always on CS4, but until a month or two ago, it worked perfectly. I have the latest version of the Camera RAW software, too. Any suggestions?

  Thank you in advance!

  CS4 software will not work under El Capitan (Mac OS X 10.11). The software is too old and will never be updated, because it is the end of life.

  You need to restore a previous version of the operating system or upgrade Adobe Creative Cloud.

• Photoshop CS4 does not start.

  For about a week, I have Photoshop CS4 problem starts do not (or unsuitable from)

  My OS is Windows 10, I7 processor and 8 GB of RAM, I use this operating system since the summer 2015. All the CS4 apps for example bridge. Illustrator and Photoshop has worked well.

  For about a week will not start Photoshop. In the Task Manager runs an instance of photoshop, but the program does not appear...

  I changed the compatibility settings and change them in Wondows 8. This does not solve the problem.

  I tried to re - install Photoshop, but after an hour of installation always prepares the installation

  I discovered that another program (test version of paintshop) did not start either.

  If [roblem might result from graphics driver.

  Deleted the graphic driveHD 4600 and 840 M from Nvidia via MMC. Before restarting, I tried to run one of the apps that makes.

  After reboot Windows began to reinstall the drivers. The average while I tested if Photoshop could be used.

  He did it!

  After the re - install the drivers I have re-tested PhotoShop and it stull has worked well.

  Now a day later everything still works fine.

  Think the problem is resolved.

• Dreamweaver CS4 does not start

  I just installed dreamweaver CS4 on my laptop Vista Ultimate Edition, installation seemed to happen, but when I try to run DW CS4 I get the Green splash screen, which disappears, and then I get nothing! It does not crash the computer, everything works still fine, just no DW.
  
  Some time ago I installed DW8, which does the same thing. Then bought the latest version of Adobe assuming that will fix it. I uninstalled the previous Macromedia 8 suite before installing CS4.
  
  I uninstalled CS4 totally cleaned with the CS4 Cleanup utility. Removed a police log file marked as an error. All reinstalled and still have the same problem.
  
  Any ideas?

  I guess I should be more specific. If I had the same problem you are
  meeting I would do a complete search in CS4 folder for the file
  WinFileCache*.dat and delete it. You have nothing to lose.

  And here is a message if you have an Acer computer
  http://www.Adobe.com/cfusion/webforums/Forum/MessageView.cfm?forumid=72&CATID=674&ThreadId = 1391324 & enterthread = y

  And finally, it could be a conflict with another program, but the video card
  seems to be a good way, if it could not try disabling
  everything that is not related to the operation of Vista with MSConfig, and then restart
  Dreamweaver. I know that this must be done by Adobe technical support, but good...

  Area again just to help
  aka Frenchy ASP.
  "Alain St-Pierre" wrote in message
  News:ge55g1$E81$1@forums. Macromedia.com...
  > Ok maybe you bought a collection and dremweaver not only. But maybe my
  > fix is always good. In the CS4 folder is a folder call configuration
  > with the file that I mentioned before. If so, try delete it anyway. If
  > not then sorry. Will look even more.
  >
  > I'm waiting to get the trial version of CS4 master collection when
  > It comes out and will be installed on my PC to test Vista. So I hope to have
  > some kind of problem then I can begin to start to solve the problems. So far I have
  > will keep looking in other post to try to help.
  >
  > Making my better aka Frenchy ASP.
  > "rucky544" wrote in message
  > news:[email protected]...
  >>

  Quote:

  > It is a file called WinFileCache-[random_numbers] .dat. you
  > will be
  > find this file on vista in
  >>
  > C:\Users\\AppData\Roaming\Adobe\Dreamweaver 9\Configuration.
  > Where 9 might be different depending on your version.
  > Just delete the file and restart Dreamweaver.
  >>

  >>
  > Thanks for looking into it, Frenchy, but still not good.
  >>
  > I looked in the roving adobe folder, the only dreamweaver folder
  > It
  > was the CS4 folder, which so marked up like old (after that I had uninstalled
  > he...
  (> once again)
  >>
  > Also restored with a system restore before installation of Studio 8.
  >>
  > Unfotunatally I still get the same problem. Windows gave me the
  > the program 'useful' message does not work!
  >>
  > Other ideas?
  >>
  >
  >

• Bridge CS4 does not stop

  Hello

  I had installed on my Windows 7 laptop PSCS4.  I try to install PSCS5, but BRCS4 does not stop.  Installation of CS5 also detects if opened.  The uninstaller detects also is also open.  I disabled the CS4, but BRCS4 is still as open dectected.  I have also shut down several times.  Does always BRCS4.

  I'm open to suggestions.

  Thank you

  Go to Task Manager, process and turn it off.

• Bridge CS3 does not start

  For the first time, bridge will not be in service, either from CS3 or areas of XP programs at startup. I downloaded and inrtalled the Bridge CS3 2.1.1 update and it did not help. I get the Message: the application failed to initialize properly (Oxc0000022). Click OK to finish. Please help if you can, thanks. Phil

  PS don't change to my computer that I know is I installed a ran defrag program perfect Image

  You need to reset your preferences.    Hold down the crtl + shift + alt keys and start photoshop.  You will be a "Remove Adobe PS settings file" window.  Click Yes.   For detailed instructions, see FAQ on the right side of the main page of the forum.

  To reset the preferences in bridge CTRL key hold and launch Bridge.   You get a reset window, choose all 3 options.

  Your may need to perform one or both, didn't know exactly where your problem lies, but try the bridge option first.

• Bridge does not start

  Several problems started at the same time.  Bridge CC does not start and Lightroom CC does not start.  Photoshop no longer allows me to open Nik plug-ins.  I have re-installed PS, Lightroom and Bridge.  Suggestions for moving forward?

  Wells

  Reinstall Visual Studio issue fixed.  Thank you

• I'm using Photoshop CS4 on an iMac with OS Lepord of snow.  Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine.  My problem is that now my Photoshop does not start and gives me a messa

  I'm using Photoshop CS4 on an iMac with OS Lepord of snow.  Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine.  My problem is that now, my Photoshop does not start and gives me a message to contact Technical Support with error # 150:30... What should I do now? @

  You must click on this link 150:30 blue and start with message 11.

  Don't forget to leave a space after sudo python before submitting the script.

  Remember that you will not see your password when you enter it when calling to make.

• 7 does not start with a connected external Western Digital hardrives.

  I have two external hardrives WD, connected to a pc to the bridge under windows7.  When the hard drives are connected, Windows7 does not start.  It hangs on the black screen.  Without the disks attached, it starts very well.  Anyone know what I can do to not having to pick up leads outside whenever I want to start?

  Solved.

  Use Windows Update to install the update from Western Digital Technologies WD SES device released by Microsoft in January 2011.

  My system hangs is no longer with USB Legacy Support set to 'Auto '.

• Radio 1 does not start on 1124N

  My config is a stand-alone 1124N running 12.4 configured through CLI. Joined the config I've built so far.

  Due to the fact that this AP does not comes with a power adapter and I have no power injector and the only power I have is from an ASA 5505 that I don't want to reconfigure currently, I can't launch the GUI, the CLI so is my only option.

  Is someone can you please tell me why radio 1 does not start?

  Thanks in advance

  Hello

  You can add subinterfaces for radio1, just in the same way you have for radio 0:

  interface Dot11Radio1.10
  encapsulation dot1Q 10 native

  Bridge-Group 1

  interface Dot11Radio1.20
  encapsulation dot1Q 20

  Bridge-group 20

  interface Dot11Radio1.30
  encapsulation dot1Q 30

  Bridge-group 30

  Kind regards

  Madhuri

• Windows 7 printer spooler does not start

  just my printer spooler does not start in Windows 7.  I received a message that the spooler wasn't running when I tried to use it today.  I used the printer for a few days. "net start spooler" fails from the administrator command prompt.  I checked that the CPP is running.

  I installed SP 1 yesterday with success, but I went back to the restore point, but still, the spooler does not start.

  The system acts as the spooler is missing.

  How can I solve this problem?

  Thank you

  Jim

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Locate bridge end RPC Mapper in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Repeat the procedure for DCom server process Launcher.

  It is always sensitive in this situation to achieve a malware check.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

  Currently, this is a good combination that seems to detect more malware, but it can miss the malware as all security software can do.