DW CS4 does not start

Similar Questions

• AE CS4 does not start on the Multi-Core system

  I use an older version of After Effects (AE CS4).  I recently built a new job which is bootable in different choices of multicore (up to 40 cores).

  I can start AE CS4 on the configs of start up to 16 cores.  But above all that, AE CS4 does not start.  It will not even appear the start screen (but the AfterFX_32.exe process appears in Task Manager).

  I was wondering if it is possible to get the AE CS4 to work on configs with more than 16 cores?

  Thanks for all the ideas!

  N ° there is no way because at the time operating systems did not use more hearts and thus the libraries underlying system down to the C/C++ code can not handle.

  Mylenium

• Photoshop CS4 does not start.

  For about a week, I have Photoshop CS4 problem starts do not (or unsuitable from)

  My OS is Windows 10, I7 processor and 8 GB of RAM, I use this operating system since the summer 2015. All the CS4 apps for example bridge. Illustrator and Photoshop has worked well.

  For about a week will not start Photoshop. In the Task Manager runs an instance of photoshop, but the program does not appear...

  I changed the compatibility settings and change them in Wondows 8. This does not solve the problem.

  I tried to re - install Photoshop, but after an hour of installation always prepares the installation

  I discovered that another program (test version of paintshop) did not start either.

  If [roblem might result from graphics driver.

  Deleted the graphic driveHD 4600 and 840 M from Nvidia via MMC. Before restarting, I tried to run one of the apps that makes.

  After reboot Windows began to reinstall the drivers. The average while I tested if Photoshop could be used.

  He did it!

  After the re - install the drivers I have re-tested PhotoShop and it stull has worked well.

  Now a day later everything still works fine.

  Think the problem is resolved.

• Bridge CS4 does not start

  Forgive me, but I'm new to Photoshop.  I just installed CS4 Extended and tried to charge toward the high bridge.  It freezes immediately. CTRL-ALT-DELETE will return me to Windows.  I checked the other posts and have done the following:

  Update video drivers

  CS4 11.0.1 update

  Bridge opened in CS4 - gel

  Bridge opened with pressed CTRL and reset - gel

  CS4 has worked without any problems.

  System Specs:

  Windows XP (Service Pack 3)

  Processor AMD Phenom 9950 Quad 2.6

  4 GB of Ram

  NVidia GeForce GTX 260

  Any ideas?

  And HERE! I was in the section Support Norton and noticed a task for Norton does not not with programs that access the internet.  The short list has not designated an Adobe product, so I downloaded the patch anyway.  AND IT WORKED! I don't know how or why, but the bridge starts without problem! I almost cried... lol! I will post this info on the main Board with the link to Norton for everyone!

  Thanks for staying in touch!

  Kim

• Dreamweaver CS4 does not start

  I just installed dreamweaver CS4 on my laptop Vista Ultimate Edition, installation seemed to happen, but when I try to run DW CS4 I get the Green splash screen, which disappears, and then I get nothing! It does not crash the computer, everything works still fine, just no DW.
  
  Some time ago I installed DW8, which does the same thing. Then bought the latest version of Adobe assuming that will fix it. I uninstalled the previous Macromedia 8 suite before installing CS4.
  
  I uninstalled CS4 totally cleaned with the CS4 Cleanup utility. Removed a police log file marked as an error. All reinstalled and still have the same problem.
  
  Any ideas?

  I guess I should be more specific. If I had the same problem you are
  meeting I would do a complete search in CS4 folder for the file
  WinFileCache*.dat and delete it. You have nothing to lose.

  And here is a message if you have an Acer computer
  http://www.Adobe.com/cfusion/webforums/Forum/MessageView.cfm?forumid=72&CATID=674&ThreadId = 1391324 & enterthread = y

  And finally, it could be a conflict with another program, but the video card
  seems to be a good way, if it could not try disabling
  everything that is not related to the operation of Vista with MSConfig, and then restart
  Dreamweaver. I know that this must be done by Adobe technical support, but good...

  Area again just to help
  aka Frenchy ASP.
  "Alain St-Pierre" wrote in message
  News:ge55g1$E81$1@forums. Macromedia.com...
  > Ok maybe you bought a collection and dremweaver not only. But maybe my
  > fix is always good. In the CS4 folder is a folder call configuration
  > with the file that I mentioned before. If so, try delete it anyway. If
  > not then sorry. Will look even more.
  >
  > I'm waiting to get the trial version of CS4 master collection when
  > It comes out and will be installed on my PC to test Vista. So I hope to have
  > some kind of problem then I can begin to start to solve the problems. So far I have
  > will keep looking in other post to try to help.
  >
  > Making my better aka Frenchy ASP.
  > "rucky544" wrote in message
  > news:[email protected]...
  >>

  Quote:

  > It is a file called WinFileCache-[random_numbers] .dat. you
  > will be
  > find this file on vista in
  >>
  > C:\Users\\AppData\Roaming\Adobe\Dreamweaver 9\Configuration.
  > Where 9 might be different depending on your version.
  > Just delete the file and restart Dreamweaver.
  >>

  >>
  > Thanks for looking into it, Frenchy, but still not good.
  >>
  > I looked in the roving adobe folder, the only dreamweaver folder
  > It
  > was the CS4 folder, which so marked up like old (after that I had uninstalled
  > he...
  (> once again)
  >>
  > Also restored with a system restore before installation of Studio 8.
  >>
  > Unfotunatally I still get the same problem. Windows gave me the
  > the program 'useful' message does not work!
  >>
  > Other ideas?
  >>
  >
  >

• I'm using Photoshop CS4 on an iMac with OS Lepord of snow.  Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine.  My problem is that now my Photoshop does not start and gives me a messa

  I'm using Photoshop CS4 on an iMac with OS Lepord of snow.  Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine.  My problem is that now, my Photoshop does not start and gives me a message to contact Technical Support with error # 150:30... What should I do now? @

  You must click on this link 150:30 blue and start with message 11.

  Don't forget to leave a space after sudo python before submitting the script.

  Remember that you will not see your password when you enter it when calling to make.

• Why does not start downloading Photoshop elements 13

  Why does not start downloading Photoshop elements 13

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14 | 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Newly purchased Dreamweaver does not start

  Hi, everyone, hope, will help here, as do not have access using Dreamweaver simply because it does not start... Just purchased the program yesterday and today installed with Photoshop, but Photoshop is correct and just showed Dreamweaver pop with the Preferences file and Windows has reported an error and closed Dreamweaver... Again he started later... Tried to uninstall and install again and it's always the same, what can I do? Really frustrated at that... and my laptop meets all the conditions...

  Have you looked in the Dreamweaver FAQ? There are here, both of which may help you:

  • CS4 installation issues
  • Dreamweaver crashes at startup

  If your computer is an Acer, the answer is in the second.

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• MacBook Pro does not start

  I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  You said "It's like death does not start."

  Does this mean that he shows no signs of life? Indicator light power?

  Hear the carillon?

  Hear the fans?

• The FireFox 42.0.1 application does not start.

  The FireFox 42.0.1 application does not start. I can uninstall and reload FireFox 37.0.2 and that worked, but now when I load 37.0.1 it installs really 42.0.1 that no longer works.
  I had to use IE 10 to contact Mozilla.
  Year annual should be ashamed of this...
  Can you tell me why Mozilla FireFox 42.0.1 installs but won't work?
  In addition, why FireFox 42.0.1 install when I try to install 37.0.2?

  It is possible that your firewall or other security software blocks or limit Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating