Bridge taking about 10 minutes to start

Similar Questions

• taking about 6 minutes or longer at the start and saying in a black screen 'remove shading '.

  original title: "remove the cloak."

  My Compaq Presario desktop computer running Vista Ultimate SP2.  I added 1 GB graphics card, 4 GB memory and a 4GB USB flash drive as ReadyBoost.  Now it takes about 6 minutes or more to start and saying to a screen black 'Remove shadowing' does that mean?  Please help, thanks.

  AB

  Hello

  you don't say what version of bits you use; 32-bit or 64-bit

  read these articles on the occultation of the memory

  http://www.hardwareanalysis.com/content/topic/71919/

  http://support.Microsoft.com/kb/78528

  http://www.velocityreviews.com/forums/t185253-how-do-i-turn-off-shadowing-in-BIOS.html

  in a 32-bit vista of the most RAM system, you can install is 4GBs of RAM and it can only use 3.15GBs of that anyway

  get rid of the Readyboost which is designed to be used in the machines to improve performance which have only about 1 GB of RAM

• FF 8 freezes regularly for about 5 minutes about 1 minute after start

  I'm on a HP Pavilion DV7, running windows 7 Home Premium SP1, 64-bit, 4 GB of ram. It was also on this laptop with 7 FF. This also happens when I run in safe mode. I tried just start and not let my homepage (Google), and it still happens. Is not only FF that freezes, the grind of the whole machine to stop, and then after about 5 minutes of that Norton 360 tells me FF made a significant amount of read activity. I tried to run with disabled Norton, same result.

  After the shot, everything returns to normal and ff works normally, until the next time I got close and restart ff, or the next time that I reboot and start to ff.

  The problem persists if start you Firefox in Mode safe? http://support.Mozilla.com/en-us/KB/safe+mode

  What is with an empty profile? http://support.Mozilla.com/en-us/KB/basic%20Troubleshooting#w_8-make-a-new-profile

• My MBPr takes about 30 minutes to start

  I'm on a late 2013 MBPr 15 ", 2.6 GHz, 16 GB ram, osx 10.9.5 mavericks. He used to start in half a minute, and a year ago it became a half hour. I don't know what happened. The reason I can resist this slowness was that I rarely "close" my mac. Most of the time I just close the lid and let it sleep unless there is a system failure which forced me to press and hold the power button to turn off. Initially I suspected that it was because the machine was not closed down, but discovered later reboot had nothing to do with the way in which it was closed.

  I decided today to tackle the problem and the first thing I'll do is start my mac in verbose mode. I checked also system logs in the Console app today and I don't think he has much to say on the issue.  I hope that I can get a decent screenshot in verbose mode to post here later today.

  If anyone knows where in the system to review, please let me know. I am uncomfortable with the help of Terminal Server. Thanks in advance for your help.

  Reset the SMC and the NVRAM:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  If no change, download and publish a report of Etrecheck:

  http://www.etresoft.com/etrecheck

  Ciao.

• I have a HP G62 with Win 7, takes about 10 minutes to start,

  Takes a long time to start, think it might be a problem with hd, so got another, samething happened. Reinstalled old hd and restarted without the bat and it starts fine, rebboted with batt in and it was slow again... restarted with the stick and it was slow again... did this several times. A bad mattress would do that?

  While it seems strange that a bad or low battery could cause the problem, I must say that it is possible. A few years back that computer laptop of my brother would not boot at all with his bad battery and removed the battery and it booted right up. Replace the battery-everything was good.

• Satellite P850 take about 4 minutes to start Windows after the Welcome screen

  Hey

  My SATELLITE P850 take some time after the Welcome screen to start windows, it was like this the first time that I get it.

  Any help or idea?

  thx a lot

  Have you changed anything in your system or maybe the HARD drive? Did you create a partition?
  4 min to complete the startup process is really long
  Have you installed an antivirus software? Maybe a Norton Antivirus?
  I got this software installed on my laptop and it took an eternity to boot the system.
  I replaced Norton Antivirus with free ware software called Avast!.
  Now the Windows starts for 30 sec

• Windows 7 Home Premium x 64 takes about 40 minutes to start. Web browser takes 12 minutes to appear, another 15 to load my homepage.

  HP p6520F

  I can provide all other necessary details. I did the steps from startup to boot, I've updated all rivers for my model, which are available from HP etc. I did complete relocations, but this slow extreeeeme problem won't go away. Help, please!

  HP provides all diagnosis, available, perhaps from a shortcut key when you first pwr on?

  HD machine will also have a bootable disc, free check utility

  A bootable memory test, www.memtest.org

  No doubt you have also scanned for viruses/malware

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Malwarebytes.org/products/malwarebytes_free

• Aero on vista on seems to make execution slower and start upward after the microsoft icon on screen-it takes about 1 minute to get on the desktop! Otherwise everything else is relatively ok - for vista, that is _

  I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
  Help!

  I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
  Help!

  You can read this:
  http://www.Vistax64.com/tutorials/81176-speed-up-performance-Vista.html

  t-4-2

• Satellite A200-1N needs 10 minutes to start

  My satellite A200-1N takes about 10 minutes from start-up until it gets to the desktop and can be used?
  I'm sure that's much worse progressivel months? I removed almost all startup files, but nothing helped.

  Hello

  Have you installed new operating system on the HARD drive?
  Which option SATA to be selected in the BIOS: AHCI or compatible mode?

  Usually, compatibility mode could slow down the performance of the HARD disk and the unit would need more to start.

• Whenever I have start Windows and run Firefox, it crashes when I enter a Web site. It continues for about 5 minutes.

  Firefox hangs on for about 5 minutes after the start of the system. Deactivation of the modules does not help.

  Hello Aram767, we are sorry to hear that Firefox crashes. To better help you, please follow the steps below to provide us with the ID's crash to help us learn more about your accident.

  1. Entered on: crashes in the location bar (this is where you enter the URL of your Web site) and press ENTER. You should now see a list of submitted incident reports.
  2. Copy the 5 most recent accident ID that you see in the accident report window and paste them in your response here.

  Thank you for your collaboration!

  More information and additional troubleshooting steps are in the article Firefox plant - troubleshoot and prevent assistance fixing crashes .

• Start-up phase takes about 10 minutes for bot

  of course I changed something on my departure upward. now, it takes about 10 minutes before my office show upward. When I turn my computer on my screen is blue, almost black, and I get a dash flashing (-) in the upper left corner. it flashes for about 10 minutes. before he finally start. Help!

  [Moved from comments]
  

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems when the computer starts.

  1. what operating system is installed on the computer?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check to see if the same problem happens.

  Method 2: Try to run the troubleshooter of Performance:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  (For Windows Vista)

  Method 4: If the question does not exist in Mode safe mode then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  More information: Optimize Windows 7 and Vista for better performance:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Please follow these recommended steps and post if you still experience the problem.

• Computer has a blue screen crash about 5 minutes after each start up successful

  Computer has a blue screen crash about 5 minutes after the start of successful with the error msg: Stop 0x0000008E (0xc0000005, 0xb7e4571d, 0xb1440748, 0x00000000) Atapi.sys-address b7e4571d base at b7e3b000 datestamp 48025396. Any help is appreciated.

  Hi jason12685,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  Possible causes of this error include the following:

  • Drive hard damage
  • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
  • Incompatible device driver
  • Incompatible software

  Check out the articles below and try the steps mentioned, check if it helps.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  Method 2

  I would also say that you update all the drivers for hardware devices on the computer by visiting the manufacturer of the computer or the device manufacturer's Web site.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Startup takes about 5 minutes to complete to start on my HP laptop.

  Desktop loads upwards just fine, fast, straight bar tool with the exception of the Wi Fi Connected icon, it takes about 5 minutes to appear, this time on that hard drive lite is a little hard. If you tap the icon on the tool bar network bars she says you are connected. If you try to open something out of the Office during that time, he just sits there watching waiting for you to start to complete. Once starting over thing work fine, that too, if you plug in a USB key during the startup time (5 minutes), you hear the sound that you always hear when you plug one but it doesn't appear in Windows Explorer until after 5 minutes of waiting. I did a system restore to a moment where it was sunny and that did not help. I ran a defrag on the C drive, I ran a disk check, with no errors found. I look in the task during this time Manager, and you see no programs running. I run Malwarebytes and Super Anti Spyware and nothing detected. Can someone help me with this?

  Hello

  Welcome to the Microsoft Community Forum.

  I understand that the process of starting your computer is slow. Let me ask you a few questions to better understand.

  1. What security software do you use?
  2. You did it all meaning hardware or software change?
  3. You get the error message? If Yes, when and what is the exact error message?

  I suggest that you perform a clean boot procedure, and then try to install the add-in.
   
  See the link to perform the clean boot.

  Method 1: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Important: Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  Note: See " " How to reset the computer to start normally after a boot minimum troubleshooting "to prepare the computer to start as usual after troubleshooting. "

  Method 3: Optimize Windows performance

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  Method 4: You can use the provided patch below it article and check if that helps to solve some problems.

  http://support.Microsoft.com/mats/slow_windows_performance/

  You can also see the article: Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2

  http://support.Microsoft.com/kb/977419/en-us

  Please come back if the problem persists, we will be happy to help you further.

  Thank you

• L20 - 264 takes about 10 minutes to stop

  Hi my L20 - 264 is very very slow when stopping down, standing or hibenating.
  Select start/turn off computer he can takes about 5 minutes to bring up the options bar. Of and then selecting turn off for example then pick up another 5 minutes before the laptop actually powers.
  There is no software hogging the system because I've been surfing or play media files.
  Is due to the fact that it has only 192 MB of ram, because I thought the upgrade anyway. Or I am barking the wrong tree?

  See you soon

  Hello

  I agree with Jonathan

  A little more RAM can be very good, and it can make your device faster and more flexible. I recommend you to check all active running process. Generally, many of them is absolutely useless, but they can slow down the system quickly especially if the device does not have a lot of RAM.

  I recommend clean up the operating system, use the Defragmenter tool and check applications that start with Windows. Many of them may be disabled. Enforcement antivir may also slow the operating system currently running. Check all this. I hope that your device will work better.

  By the way: the compatible memory module for your device are
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)

  Good luck!

• Remote works for about 5 minutes after I turned on my Qosmio F60

  Hi there all the

  My Qosmio F60 remote works for about 5 minutes after I turned on my pc...
  How can I make it works normally?

  all Ty<>

  Hey,.

  And after these 5 minutes, you get an error message or what happens?

  Either the remote or not so did you start some applications after 5 minutes they could affect this function?