browser Simulator simpak 5.0 9530 and cards work do not

Similar Questions

• Tecra S1 - USB ports (all) and card reader does not

  Hello

  Just got a 2nd user Tecra S1. I was told that the drive SD card and USB ports do not work. Card reader (and card PCMCIA USB ports) works as well as the ps/2 port.

  Any ideas anyone? USB ports turn on power on indicators key USB etc but nothing is recognized under XP.

  See you soon

  Hello

  Maybe the USB ports listed in the devices with exclamation points Manager yellow. Did you check that?
  In addition, I would recommend updating the chipset driver. Visit the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you also received a Toshiba Recovery disk you may have to use it. The HARD disk will be wiped and XP will be installed all the drivers and tools.

  Good bye

• HP Pavilion dv6-6119wm HDMI and VGA works do not both together

  Good evening, I have a laptop HP Pavilion DV6-6119wm Quadcore with AMD Radeon graphics card, which includes a VGA port and an HDMI cable. Together they are so close that you cannot connect both at the same time, but as I needed this so much, I cut the part on the side of the VGA cable to connect the two: the VGA and HDMI cables. Now they are connected.

  The runtime separately, they work very well: HDMI works ranging from office with the laptop screen and VGA works too big office that stretches with the screen of the laptop, but I want to run the extended desktop on the 3 displays: the laptop display, vga and hdmi. I tried to put parameters "- display - screen resolution" on Windows7 and when I try to "Extend the desktop to this display" if she s HDMI If VGA is work or vice versa, I get: "cannot save the display settings.

  Is the function of the use of two video cards at the same time is available? So then I m something wrong on the parameters, and if not, I'll have to look for an alternative to the extension of the workstations.

  Thank you.

  Roberto

  Hi Tan60, I did some research for you and I found a link that I think will help with the problem you are experiencing. Please click on the following link and follow the path to the document that is located outside of HP.  http://goo.GL/L2bZNN

  If you have any questions or concerns, feel free to write again and I will continue on with more research on this issue.

  Thanks in advance

  Waterboy71

• HP Envy, Windows 8 slow, late and does work does not correctly

  Hello

  First off let me give a run down of my installation:

  -HP Envy Dv7, (about one and a half years)

  -Windows 8.1 (I upgraded windows form 8)

  -HDD 750 GB (Stock)

  -Everything else is stock based on the computer

  So, my trouble started about 3 months after what appeared to be a routine stop after a day use.  The next time I started my computer took a lot more time to start, I got an error that talked about my control center catalyst having an error and does not and that nothing would be open to all.  After the merger with different ideas on how to solve the problem, I dropped and it factory reset.  This fix has worked for the whole two days were once again, I got the same problems, I did another reset and when it does not work I gave up for a while.  About two weeks ago, I again have to reset it and then updated for windows 8.1through microsoft dreamspark.  This seemed to fix my kind of problem, the same questions (not counting control catalyst who never returned after the update) would be upward if I have it plugged anything in the USB drivers.  Now for some unknown reason which was not the case for my wireless mouse which worked just fine.  If at this point, I have a mouse plugged wireless and no problem whatsoever.  One day I shut down my computer with the mouse is always plugged (I never do usually) after I do all my troubles to come back but enlarged.  I tried to do just a refresh of windows but it says that my hard drive is locked and let be honest I really want to keep refreshing and resetting my laptop and lost al my stuff.

  So now, here's a list of my exact problems in most occuences recentof, now:

  -Slow start and typing in my password take like five minutes to register that I typed in fact anything

  -l' unlock screen is for like five minutes

  -My Office take a good ten mintues to load all my icons and others

  -J' have a popup that says IEWebsitelogon, not having that take a long time to close

  -EACH window is delay, that is difficult to change their size, move about minimize, close, etc...

  -Every thing take > then five minutes for open including Manager, start menu task

  -Much more delay and related issues

  What is one thing to hard drive? They are not too expensive to replace, so I can get another copy of the win8 form my school so if that is the question that is very well.

  I really need help, my computer is basically usless, I am a student I need my computer please help me.

  Hello

  As you probably know, the error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also entirely consistent with the problems of performance, as you describe in your initial post.

  If there is no help, the player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 56 of your & Maintenance Guide.

  Kind regards

  DP - K

• Network adapter (device Bluetooth (Personal Area Network) and Btooth works does not after installing W 7 Ultimate__ (Situation Reported to microsoft Hel and Support under SRX1120597135ID Without solution untill today))

  BTooth works do not after Windows Vista upgrade (Btooth works without problems) for W7
  At the moment I have problems connection BlackBerry device and other devices via Btooth
  messages 1: 'softwarfe device driver was not successfully installed ".
  message 2: "WIDDCOMM Bluetooth Software 6.1.04403 Dell Incompatible" (WIDCOMM = Broadband - manufacturer)
  In short, the list obtained messages:
  1 device driver software was not compatible
  2. incompatible software Bluetooth
  3. the drivers are not installed: lists of codes (31) (28) (10)

  Report of the final situation for Microsoft Help and Support under SRX1120597135ID (withoutany positive response so far, I have been asked to report through this forum, I hope a solution will be here)
  I tried all the options you will find in google without success.

  I contacted Dell and Bradband and I have upgraded to WIDCOMM Bluetooth Software 6.2.0.6600 available in Dell Support without positive results.

  Repost: Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• speakers and microphone works do not, said convenience store "device working properly.

  a couple of days ago my machine makes an auto update as usually and things seemed good, but shortly after, I noticed that I had no sound function or a microphone of my internal devices and making helmet is also non-functional. the first thing I did was restart, no luck. Then, I ran a convenience store and received the msg above. I noticed that while I had the audio device manager open that I do not have access to the 'configure', 'default' and 'properties' functions under the tabs of playback and recording. After a further review I thought that maybe I had a problem of compatibility of the driver with the recent update, but I'm not really sure of what has been updated. I also thought I might have a conflict of use with an application hogging things even though I have seen no unusual activity in the Task Manager. Despite this, I disabled the 'google ok' feature in chrome and restarted. This seemed to fix that I had the sound and the microphone back, but when I started this morning I had the same problem and since I don't re - not allow 'google ok' and it does not automatically start (I checked), which doesn't seem to have actually done something after all, or there are other problems that are still not resolved.

  in any case, I'm running worm Realtek HD Audio Driver 6.0.1.6937, I'm on a wired ethernet connection, I got no error msgs and I did not any changes in software.

  FYI, I found an announcement and related solution for what seemed to be a similar problem (see post titled "speakers and microphone doesn't work DO NOT, all the devices said to work" posted on 26/02/2013 15:00), but the pilot referenced was an IDT Audio driver not a Realtek, don't know whether or not the process is the same.

  so that is where I am. any help?

  Laptop HP 2000-2b24NR
  Product no.: C2M60UA #ABA
  OS: 8 64-bit Windows

  Hello

  I do not work for HP, but I see a definite advantage on the subject of what you are suggesting.

  Try to perform the following procedure.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  Realtek HD Audio Driver - Windows 8

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  Then, download and reinstall the Chipset driver on the following link.

  Chipset Driver - Windows 8

  When done, shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Disconnect the power adapter and remove the battery.  Press and hold the power button for 20 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click "Speakers/HP" (speakers or headphones) once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• SE connect Blackberry 10 Simulator and BBM works does not in the Simulator

  Hi all

  I use QNX momentics IDE for development and blackberry 10 Simulator.

  I use the simulator using VMWare workstation. A problem that occurs is that my Simulator is impossible to connect to BBM. Although the Internet is there on Simulator (checked with the browser on Simulator). As far as newspapers are concerned in the case of the blackberry simulators 9900 and 9930 counted out newspapers and event logs.

  But in this Blackberry 10 Simulator, I could not find newspapers where they are generated.

  Please tell me the location where in 10 blackberry Simulator logs are generated.

  Thank you best regards &,.

  Tushar

  for newspapers, check out this link

  http://supportforums.BlackBerry.com/T5/native-development-knowledge/debug-on-the-device-with-console...

  Please mark as solution if it helps

• Satellite A300 - dvd, usb and card reader does not work

  Help needed please.

  Have a laptop Satellite A300, running vista.

  Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it. The card reader can't find anything on the card (and Yes, the card was full.)

  The usb scanner is recognized as an external memory card and the other usb port does not fuction.

  I have not installed or don't remember changing of settings or do whatever it is the habit.

  Any help or thoughts would be appreciated.

  Hello

  Your ad is very confused.
  > Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it.
  Well, there are several reasons for this; It would be possible that the inserted disc is not completely compatible. Try different drives from different manufacturers.
  It would also be possible that the STRANGE laser lens is dirty. In this case, you might clean using a cotton ball and alcohol tip. In my case it helped.

  > The card reader can't find anything on the card (and Yes, the card was full).
  Did you use a compatible card? The laptop runs these cards:
  8MB - 2 GB SD card
  SDHC - 4 GB card
  -16 MB - 2 GB xD Picture card
  Memory Stick - 8MB - 256MB
  Memory Stick Pro - 256 MB - 2 GB
  MultiMediaCard - 8 MB - 1 GB
  miniSD (with SD adapter) - 32 MB - 2 GB

  I recommend also to format the card and to copy files from computer, and then test this.
  You can also reinstall and update the driver for the card reader controller...

  > The usb scanner is recognized as an external memory card
  Can't believe that you must use a scanner software (must be provided with the scanner) and have to test this unit. By the way; for the most part a scanner driver must be installed in order to use this

• Aspire 5562 camera, touch pad and card reader does not

  Hello world!

  I had an upgrade recently with my Aspire 5562 to Windows 7 and everything seems to work fine except the webcam, card reader and touchpad doesn't have function of scrolling even if I can use it partially. Anyone know where I can download the drivers? I don't see no 5562 support here in the drivers download page.

  Thank you very much!

  Unfortunately, this seems to be an older unit that is no longer supported by the system of drivers.

  Online search for chipsets/hardware drivers with that you are having a problem probably will produce results.

• Desire x 2 Dock USB and card SD does not work

  The USB port on the left in my dock Envy keyboard x 2 has stopped working. Whenever I anchor the portion of the Tablet for the keyboard, I see an error message "USB device" unrecognized in the taskbar. In addition, displays an 'unknown device' Device Manager, listed under the key "other devices."

  Also note the card SD of Dock is doesn't work the same way. Some cards are recognized so that in the past he appeard as USB/removable disk device.

  I tried to reinstall Windows, reinstall all the packages in a driver from the web, etc. Nothing works. A few times, I was able to use the port or card reader after plugging in the tablet. However, they invariably become non-functional the next time I log out/dock the tablet or restart the system.

  I am quite experienced professional Windows support with thousands of hours of creation of hardware/software solutions around Microsoft platform. However, I am at a loss as to why I can't get this device to be recognized. All other Dock - right USB, HDMI output, keyboard and trackpad devices - work. The problem seems related specifically to the left and some hub USB root supports it and the SD card reader.

  FYI, I'm a stranger for months, making it virtually impossible to send the diagnostic/repair unit. I hope that there is a hotfix for that and that someone who reads this will have a suggestion on how to proceed.

  Thanks in advance!

  RCK

  Well, in a bizarre resolution to the issue, the dock has decided to start working again. Don't know what I did, but I suspect it had something to do with the UEFI settings stored in the CMOS. I searched update utility for BIOS Insyde Software documentation after witnessing of the docking station to return to life temporarily after re-flashing the BIOS. I found a setting in the platform.ini - ClearCMOS file - and I flipped it to '1' and re-flashed to see what would happen.

  Nothing changed immediately, however, the next day I was invited by Windows Update to download the latest definitions for Windows Defender. When he was done, he prompted me to restart, I found strange as the Defender updates don't usually require a reboot. Then I noticed the "Windows Update" start screen, while the unit has been reset, indicating something was more than just a simple refresh definitions Defender.

  Yet, I do not think anything of it and continued by usual until I noticed something weird: when I re-docked the Tablet I heard the familiar "donk doink, dink" tones. I did a double-take to make sure that nothing not hanging off one, working USB port (right side - it was empty) and then frantically connected to see what was going on a. To my surprise, the USB error message was gone and I could see once more the content of my 64GB SD card into the slot in the dock.

  I took a screenshot of the Device Manager just to have a reference of work to see how it * should * look, then held my breath and detached from the tablet. I waited the Plug & Play tones, which indicates the docking drivers, had unloaded, checked device (no sign of the USB hub) Manager, hold for a count of ten and prayed while re-docking of the tablet. Yet once, the PnP tones shot and Explorer opens a window on my SD card.

  Still not convinced that the "fix" would stick, I took the next step and restarted the machine. Again, everything was present when the system is back to the top and the procedure of disconnecting/dock worked as expected. My last test was completely power off the unit, wait for half an hour and then restart. Still works. In a last time, I checked the system event log to see what might have been for this mysterious Windows Update. The entrance to update itself mentioned only the definitions of Defender; However, I found several messages from the Installer service talks about the different status updates of Windows on "Absent". Very strange.

  Anyway, it's been 36 hours and I continue to check to make sure that the dock is still working. So far so good. I'll feel better as soon as I spend the weekend, but for now I think that the problem is resolved.

  As for what caused, and also what might have finally fixed, I guess this will remain a mystery. Could Defender blocked a significant update that was lit green subsequently after the update of definition? Or maybe my tweaking of the BIOS update utility. Trigger files INI Windows re-installation of some critical updates?

  Who knows? And frankly, who cares? I'm just glad to have my dock that is doomed to return!

  RCK

• WiFi and bluetooth works is not on the computer.

  When I change my hard drive internal, then my laptop wifi and bluetooth doesnot work, not show in the Device Manager, so I use the broadcom wireless card... Please help me...

  Oh there there, I am user of HP... and I have windows 7

  Click here page Hp Driver

  It is a hyperlink... Once u click on this hyperlink to the front page of the HP driver automatically...

  give your serial number or find your laptop model... To see the updates...

• Captivate 9 Widgets are not Compatible HTML5 am using a sensitive project and Widgets work Firefox not IE 11

  Hello

  I have 9 Captivate and I use embedded Captivate widgets (not those using assets). I created my project as a project that is sensitive to be able to display in the form of tablets. Captivate told me the widgets are not compatible HTML5. When I publish on my LMS, I can see the widgets and to interact with the course on my laptop via Firefox, but I do not see the widgets in IE 11. Is there a way to get around this, or I must say to my people to download another browser to use my course?

  You need not create a project as a receptive simply to play on tablets or mobile devices.

  If widgets are known to be NOT HTML5 compatible, it is better to not use them at all.  IE11 usually works with the release of HTML5 in Captivate, but your widgets are probably not going to work in this case.

• MacBook keyboard AND Trackpad works do not!

  Hello

  This morning when I opened my mac, my keyboard and trackpad were insensitive. The only button that worked was the power button. I shut it down and then instead of open a log in screen, it opened to a screen that was an animation of an external mouse and trackpad. I could move the arrow when I plugged in the mouse, but I couldn't type. I do not have an external keyboard that I can plug so I don't know if it would work.

  Does anyone have any ideas on how to fix it? I need my laptop to work as soon as POSSIBLE!

  Thank you

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Continuity and transfer works do not (Solution)

  I open this topic just to share my solution to the problem that some of you may face too.

  After upgrading to Mac OS Sierra, the characteristics of continuity has stopped working completely between my MacBook and iPhone, so I did all the procedures standards withoutsuccess:

  -Disconnect icloud on both devices and connect again

  -Reset the PRAM on Mac

  -Reset network settings

  -Turn on bluetooth works (all devices)

  -Creating a new user on mac to see if it was a problem with the specific user (without success)

  -Restart both devices again

  -Reset the router (just in case)

  And after a day trying to fix it, I gave up. But the next morning (today), I decided to try one last thing, and to my surprise, everything returned to normal instantly and magically.

  Here's what I did:

  On your mac,.

  1. disable the bluetooth

  2. finder-> go to folder...->/Library/Preferences /.

  3. delete the file com.apple.Bluetooth.plist

  4. turn on the bluetooth

  Boom. Everything returned to normal.

  I hope this helps someone who has the same problem I was. For any question, please check below.

  lucasvallim wrote:

  On your mac,.

  1. disable the bluetooth

  2. finder-> go to folder...->/Library/Preferences /.

  3. delete the file com.apple.Bluetooth.plist

  4. turn on the bluetooth

  You can check that the correct path is the one as written:

  / Library/Preferences /.

  and is not

  ~/Library/preferences/

• i IQ meditation timer and clock works do not in IOS 10

  One of my favorite applications, i - IQ clock and meditation timer, crashes when I try to open it after updating to IOS 10. I deleted the app, restarted the iPhone and reinstalled the app. But the behavior remains the same. What is broken?

  You can check with the developer and see if the app is supported in iOS 10.