BSOD - Windows 7 64-bit VM problems

Similar Questions

• LaserJet 5 M and Windows 7 64 bit - duplex problem

  I have a Laserjet 5 M Postscript with a duplex printing unit in my home network.

  Windows 7 64-bit, the duplex printing option is not displayed.

  1. I reinstalled the driver - cool from MS
  2. I manually changed the ' properties/device settings' to indicate the duplex unit is "installed".   I have administrator privileges.
  3. I rebooted the machine.

  However, under preferences - or for actual printing, under available - possibility of double-sided printing is not displayed.

  Any help will be appreciated.

  My two machines from Vista (32 & 64 bit), with no problems, print double-sided on it.

  Alright George. I have discussed this with my colleuges and we agree that this thread would be better suited in the business forum. Since it is a printer and we focus only on consumption patterns. We would do a disgrace to not send you over there.

  Here is a link to Board commercial laserjet.

  Business - LaserJet HP Support Forum

  Im going to have a moderator hover over this thread to the business section for the best chance to get a solution.

  Take care!
  Sean

• Laptop MSi S6000 Windows 7 (64-bit) wireless problem. Wireless turns off after fashion "Eve" and unable to understand how to change the settings.

  I own a notebook computer MSi S6000 Windows 7 (64-bit). My problem is that any time that my laptop's sleep mode (when I close the lid or after inactivity) wireless connection is cut off the coast and in some cases the wireless card is cut. I end up turning on the wireless card with the

  Function key F8 and then have to reconnect with my wireless network.

  After "standby" mode, I have to reconnect to the wireless network (without turning on the map).

  ---

  I have tried a number of measures to address this problem including uncheck the button 'turn off this device to save power' in the properties and made sure that my laptop ALWAYS connects to the network by making the #1 on the priority list and checking the connection to this network even when it is not being broadcast.

  Yet I still couldn't remedy this solution.

  Please help if you can. I appreciate your time in advance... happy new 2011!

  -Headfake15

  Assuming that the signal is strong, and that there is no noise in the electrical environment.

  Visit the support site of the computer and make sure that you use the latest drivers * for network adapters.

  Check support for the router and make sure that your using the latest firmware for the router.

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  * On drivers update .

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• BSOD - Windows 7 32 bit

  I've had this problem before, but I know exactly how I got rid of BSOD... IM facing problems with this BSOD again and this is troubling me a so... After several reboots my computer even advised me to take a launch to repair, I did twice, (including the system restore) and I met BSOD that displayed a different (DRIVER_IRQL_NOT_LESS_OR_EQUAL) error message... Now I am posting this using FIREFOX... In fact, I noticed that I get BSOD and my computer most of the time when I still use GOOGLE CHROME... What exactly is the problem and how can I get rid of this now?

  They are called BCC124 and are related to the material.  Read how to diagnose and, hopefully, correct in this wiki

• Samsung SCX-4300, Windows 7, 64-bit printer problems

  Our Samsung scx-4300 printer has stopped working. We have a desktop computer running windows 7, 64 bit.

  Have already repeatedly deleted the printer, installed the last pilot, did a restore of sys, switch, ports but nothing seems to solve the prob. Today in desperation I even bought a cable newprinter, but alas, same old prob.

  The mystery is this - the printer works fine when I connect it to our win - xp netbook.  Also, sometimes (on windows 7), it will print the first page then stop. Earlier than he usually just print the Greenlight on the printer flashes, but after 5 minutes the following is printed...

  INTERNAL ERROR - Incomplete Session by time out

  POSITION: 0XAA60 (43616)

  SYSTEM: H6FW/os_hook

  ONLINE: 1634

  VERSION: QPDL 1.40 11/14/2005

  I'm trying to print using PDF XChange Viewer and Word 2007. Once I sent the file to print, check the queue, it seems that 256 KB (for a file of 2 mg) was sent to the printer, but then he of the clogging. Very annoying. Wot2do?

  Hello

  Maybe this can help.

  http://www.Samsung.com/ph/consumer/monitor-peripherals-printer/printer-multifunction/Mono-multifunction/scx-4300/XSS/index.idx?PAGETYPE=prd_detail&tab=support

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Captivate 3 on Windows 7 64 bit. Problems?

  We are upgrading to Windows 7 64-bit computers. Captivate 3 works very well in this environment? Any questions that you have lived? THX!

  I have Captivate 3, 4 and 5 work all on my Win7 64 bit laptop.

  They must be installed only 32-bit applications in c: Program Files (x 86) no c: Program Files.

  I don't use Cp3 today much.  Just kept on the case where I needed to upgrade an old project Cp4 then Cp5 someday because you can't go back, before only in versions.

• BSOD Windows 7 64-bit: (0 x 0x00000000000006f8, 0 x 0000000000000008, 0000000080050031, 0xfffff80002c983f0)

  Hi all!

  I am having trouble with my Win 7 64 bit. It crashes quite often and I get the BSOD.  Finally, the error code 4 times was:

  1. the bugcheck was: 0x0000007f (0 x 0x00000000000006f8, 0 x 0000000000000008, 0000000080050031, 0xfffff80002c983f0)
  2. the bugcheck was: 0x0000007f (0 x 0x00000000000006f8, 0 x 0000000000000008, 0000000080050031, 0xfffff80002ad33f0)
  3. the bugcheck was: 0x0000007f (0 x 0x00000000000006f8, 0 x 0000000000000008, 0000000080050031, 0xfffff80002acb3f0)
  4. the bugcheck was: 0x0000007f (0 x 0x00000000000006f8, 0 x 0000000000000008, 0000000080050031, 0xfffff80002ae03f0)

  Until windows told me that he had problems of video material. But after that I downloaded the latest drivers for the graphics card I didn't have these problems.

  I tested my memory with Memtest86 + without error.

  Assembly:

  Abit AB9
  A-data not DDR2 ecc 800 MHz
  Sapphire radeon HD 4870 vapor-x 1 GB
  Intel Q6600 G0
  PSU Chieftec super 750W series

  Stop and restart the computer. Press f8 during restart to get the menu boot options. Select the option to use the VGA driver. Follow the prompts to restart.

  Power your computer like that for a few days, see if the problem stops. If so, the next task is to install a stable driver for your video card.

  Tom

• LaserJet 1022n Windows 7 64 - bit Installation problem

  Running Windows 7 Home 64 bit; Driver downloaded from HP site; The connection using USB. During installation, it does not recognize the device is connected and powered. Cannot proceed with the installation, the only option is to cancel and exit.

  Help, please

  Hi SlowAndSteady,

  First, you must download and install the drivers found here (maybe already what you're trying to install):

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=439323#n164

  If you still encounter a problem with your computer recognizes not the printer, try the steps listed here troubleshooting:

  http://support.HP.com/us-en/document/c02124639

• Another BSOD - Windows 7 64 bit

  Hey guys, have a portable game that was making BSOD recently. GeForce 660 M, i7 processors (all unparked). Heres my dmp file to a disk: https://onedrive.live.com/redir?resid=9B8673FC96561BF4! 124 & authkey =! AN1zYCjgYKDxe5w & ithint = the file % 2cdmp

  PLEASE HELP ME! I do not think it is a hardware problem, could be a pilot.

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update the BIOS and the weak)
  level chipset drivers on the site of the constructor/the system motherboard.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ==========================================================

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• NETIO.sys BSOD Windows 7 64 bit

  It is the first blue screen, I can remember since I formatted the PC in August. I'll post the info from minidump here. It's a BSOD netio.sys with 0x00000d1 error checking code-related.

  ==================================================

  Dump file: 013113-33290 - 01.dmp

  Crash time: 31/01/2013 13:23:02

  Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL

  Bug check code: 0x000000d1

  Parameter 1: 00000000'00000028

  Parameter 2: 00000000'00000002

  Parameter 3: 00000000'00000000

  Parameter 4: fffff880'016106fd

  Caused by the driver: NETIO. SYS

  Caused by the address: NETIO. SYS + 106fd

  Description of the file:

  Product name:

  Company:

  Version of the file:

  CPU: x 64

  Plant address: ntoskrnl.exe + 7efc0

  Stack address 1:

  The stack address 2:

  Address 3 the battery:

  Computer name:

  Full path: C:\Windows\Minidump\013113-33290-01.dmp

  Number of processors: 8

  Main version: 15

  Minor Version: 7601

  Empty the file size: 276.360

  ==================================================
  I'll post a link to the real, just in case minidump file.
  http://www.4shared.com/file/5HLoc2pV/013113-33290-01.html
  I don't know if there are many updates to driver for my hardware, I use a motherboard Intel 1366 dates back to 2008, and the last time I updated my drivers there were not new in awhile. This may be out-of-date mobo?
  EDIT: in my old messages, that I also asked for assistance regarding an error in kernel-power ID 41, (63) task category, could they be linked
  ? I checked today with Event Viewer and the same kernel error reported by the side with the blue screen. Here is the information of event viewer.
  ========================================
  Log name: System

  Source: Microsoft-Windows-Kernel-Power

  Date: 31/01/2013 13:22:46

  Event ID: 41

  Task category: (63)

  Level: critical

  Key words: (2).

  User: SYSTEM

  Computer: Vininode

  Description:

  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  The event XML:

   

     

      41

      2

      1

      63

      0

      0 x 8000000000000002

     

      44867

     

     

      System

      Vininode

     

   

   

      209

      0 x 28

      0x2

      0 x 0

      0xfffff880016106fd

      fake

      0

   

  Hello

  Welcome to the Microsoft community.

  This scenario usually indicates a problem with the hardware. Alternatively, the driver can cause this problem.

  Event 41 in the following scenarios can occur.

  Scenario 1: Restart the computer and there is a stop BugcheckCode error in event data

  Click here to show/hide the scenario

  Scenario 2: The computer is off by holding down the power button

  Click here to show/hide the scenario

  Scenario 3: The system restarts randomly, and no error message Stop BugcheckCode is listed, or the computer is completely not responding like it (crashes)

  Click here to show/hide the scenario

  What is the brand and model of the computer?

  Try these steps and check whether that helps you resolve the blue screen error:

  Method 1:

  Run them as Diagnostics of the memory of test to check memory problems. See the link for the same mentioned below.
  
  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Method 2:

  Please follow the steps from the link below:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 3:

  Log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). Also, look for other updates to the device driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  See also:
  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  In addition, you can also download the minidump files so here experts can analyze the cause of the error on a blue screen.

  The following link has information about the use of Windows Live Sky Drive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  I hope that helps!

  If you have questions about Windows please keep us informed. We will be happy to help you.

  box.

• BSOD Windows 7 64 bit IRQL_NOT_LESS_OR_EQUAL 0x0000000A in ntoskrnl.exe + 74469

  I just got it, I had to launch a Malwaresbytes update and PrivaZer was launched and at the same time. This is the first time I see that the origin of the problem, generally, it is my software Bitdefender that do.

  General information

  Bug check code	0x0000000A
  Bug control chain	IRQL_NOT_LESS_OR_EQUAL

  1 listen	0xFFFFF88000961008
  2 listen	0 x 0000000000000002
  3 listen	0 x 0000000000000001

  4 listen	0xFFFFF80003674AE9
  Date of the crash	19/03/2015-05:37
  Architecture	x 64

  Major version	15
  Minor version	7601

  Number of processors	4
  Size dump file of the	256 KB

  Crash of the source

  Crash of the source	Hidclass.sys + 20006370F20
  Path	C:\Windows\system32\drivers\hidclass.sys

  Description	HID class library
  Version	6.1.7601.18199
  Company	Microsoft Corporation
  Size	75 KB

  Call stack

  Address of the stack	Ntoskrnl.exe + 74469
  Address of the stack	Ntoskrnl.exe + 23AE9
  Address of the stack	Hidclass.sys + 20006370F20
  Address of the stack	Ntoskrnl.exe + 377420

  Sorry it's in French but the locations are the same as in English.

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update the BIOS and the weak)
  level chipset drivers on the site of the constructor/the system motherboard.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 7 32-bit update problems

  Hi all

  It seems that my Windows 7 Home Premium is not up-to-date. Updated the first week then nothing, why? Every Tuesday or Wednesday when theres usually an update and I click on windows update it says no new updates. Microsoft has not released updates for Windows 7? or is that my Windows Update is not find them?

  Thank you for your help

  For the error 646 see link below.
  Error Code 646 Thread

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem of graphs with FSX on windows 7 64 bit OS

  Original title: operating FSX on windows 7 64 bit OS problems

  I finally managed to install FSX Delux on my pc running windows 7 64-bit OS.  After the first start, I select a flight and get nothing more than a flickering screeen with audio narration.  There is a drop down menu that will appear I am unable to interact with.  Finally, I stop the OS and restart to use anything other than what seems to be a "loop" effect in the FSX program.  The graphics do not appear and this is a relatively new pc with I5/AMD card :(  Can someone shed light on this problem that I would like to use the program?

  Hey firefox,.

  Here is an article from the Microsoft Knowledge Base that talks about graphics issues with Flight Simulator X. follow the troubleshooting steps. This should solve the problem.

  Solving graphic problems in Flight Simulator X
  http://support.Microsoft.com/kb/925722

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 32-bit on lenovo yoga 11 s

  Hello

  I am trying to format my lenovo Yoga 11 s to change the 8 x 64 windows it came with, for a 32-bit windows (im thinking of windows 8 also). I need this because I need to run the 16-bit windows on the system application, something is not possible on an x 64 system and I tried to use virtual machines, but the program runs just terribly slow...

  So I'd start fromatting the hard drive, but I found this:

  https://forums.Lenovo.com/T5/Lenovo-Yoga-series-notebooks/Lenovo-Yoga-11-Windows-8-32bit-is-it-possi...

  Apparently, the 11s yoga does not support 32-bit operating systems, how is this possible? So what happens if I install a 32-bit of windows 8?

  Thanks for advantage.

  Comment to Moderator: Bumping more frequently than 3 days unjustly pushes down the discussions of other members. Bumping message (s) deleted.

  All processors are compatible x86_64, so the only limitation is looking for drivers. Have you tried just to install the OS?

  * Edit * missed a detail on the thread that you had linked. The Yoga 11 was a Windows RT device and not a device Windows x86_64. Your 11 s Yoga is a completely different architecture and must be running Windows 8.1 and Windows 10 32 bit without problems. You need locate if device drivers.