Burn discs of Windows 7

Similar Questions

• Language problems, burning discs of windows media player

  For the past few weeks what I burn on the media player comes with Chinese writing, even if they are purchased in England in HMV best standard. Why this is happening and how can I change it? Yesterday I also completely restarted the computer laptop back to factory settings, and it's ALWAYS the same... Thank you.

  Hello

  Method 1:

  I suggest you to return the item and check if it helps:

  Troubleshoot-problems-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Method 2:

  See the article and try to change the region settings and check if it works:

  Change the country or region setting

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-country-or-region-setting

• Not able to burn blank discs in Windows Media Player 11

  Original title: NEED TO re - INSTALL WMP11 PROGRAMMER

  MY WINDOWS MEDIA PLAYER 11 IN WINDOWS XP VERSION 5.1 SP3 DOES NOT BURN THE SONGS ON A CD AUDIO VIRGIN. WHEN I CLICK "START BURN" AFTER A VIRGIN DISK IS IN THE DRAWER 'E', THE 'MEDIA INSERT BOX' THEN "DRAG TO DISC BOX" POSTER AND THE PROGRAM NEVER "AUTOMATICALLY STARTS TO BURN THE DISK OF VIRGIN.

  THE SOFTWARE HAS BEEN INSTALLED ORIGINALLY AS AN "OEM" IN MY DELL COMPUTER. I LEARNED THAT MY WMP11 IS PROBABLY DAMAGED AND MUST BE REPLACED.

  (1) DO I DELETE THE "WINDOWS MEDIA PLAYER 11" AND THE "WINDOWS MEDIA FORMAT 11 RUNTIME" PROGRAM BEFORE INSTALLING THE NEW WMP11 BY DOWNLOADING FROM THE MICROSOFT SITE?

  (2) I CAN DOWNLOAD THIS PROGRAM FROM MICROSOFT EVEN THOUGH MY ORIGINAL SOFTWARE WAS "OEM" INSTALLED BY DELL?

  (3) I AM 79 YEARS WITH BASIC COMPUTER KNOWLEDGE. CAN YOU GIVE ME A FEW POINTERS AS TO HOW TO DO THIS PROCESS "UNINSTALL AND REINSTALL?

  THANKS A LOT FOR YOUR HELP

  Hello

   
  1. were you able to burn disc using Windows Media Player 11 earlier?
  2 have you tried burning the disc manually?
  3. What is the exact error message you get?
  4. were there any changes (hardware or software) to the computer before the show?
  
  Download the Windows Media Player 11 from the link below and see if the problem persists.
  http://www.Microsoft.com/download/en/details.aspx?ID=8163
   
  Previously, reinstall WMP (Windows media Player), you try to burn manually.

  Change the settings for burning, then check.
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/burn

   
  
  Note: Yes, you can install Windows Media Player 11 from Microsoft, even if it has been installed by Dell. No, you do not have to remove the previous Windows Media Player 11, that it will update after you download and install from the link mentioned above.
  
  Hope that helps.

• Burn data disc in Windows 7

  I have a disc with 32 files for a total of 550 MB.  I need to provide this file to 20 customers and have no any place of storage to the place that anything could happen to.  The best solution would be to copy/burn the disks to distribute.  I remember being able to burn discs in Windows Explorer in versions of Windows previouls, but can not find a method to do the same thing under Windows 7.  Can someone please advise?

  Thank you

  Paul

  If you use windows, built in software, you can copy one of the disks to a folder on your hard drive, then repeat the process of engraving 20 times.

  Personally, I use either Roxio or Nero software that I bring, tell him to copy a disc, then tell him how many copies I want and insert new records when he tells me to.  There are professional services, such as Kinko's and OfficeMax that will do this for a price if you would rather than route too.  Finally, you could watch free programs you can download like imgburn from http://www.imgburn.com .  You could also do a search on http://www.download.com for other free downloads.

  Good luck.

• ITunes fail to burn discs on my XP PC

  I loaded the latest version of iTunes on my XP computer and found that I could not burn a CD of my playlist has received an error message "no disk found" and 'records are missing', even if I can download songs from this album on iTunes and can burn discs of Windows media player.  I tried to reinstall iTunes, I deleted Roxio Creator and insofar as I could, the Windows Media Recorder. I couldn't find the offending registry identified by Apple commands and tried loading gear as suggests, but always without success. I also had a scan of my DVD programs and they are fine.

  Can someone help me with this?

  Hi petitsoldat,

  Are you able to burn CDs with windows media player the problem is related to iTunes.

  I suggest you follow the steps in the below links:

  1 ITunes for Windows: additional troubleshooting questions burning tips:http://support.apple.com/kb/TS1374

  2. impossible to burn a CD in iTunes for Windows:http://support.apple.com/kb/TS1436

  I would still recommend you to the support forum to contact apple, in case if they can help you with the settings.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: Insert the CD into the CD player when trying to burn disc Windows Media Player

  Original title: cannot burn music from WMP.

  Try to burn music from Windows Media Player, does not drive D: burn:

  A cd I burned another computer, read in my drive D: as "CD ROM".  But I got a 'blank' CD - R in drive D: and it has not recognized - msg "INSERT CD into DRIVE D:" only.

  I don't think I have a drive for burning CDs. -correct?

  007Trina

  Hi 007Trina,

  1 you get an error message when trying to burn the disc using Windows Media Player?
  2. what version of Windows Media Player?

  It seems that the CD is not recognized as a recordable device. We recommend you to try the steps mentioned in this article and check the difference:http://support.microsoft.com/kb/316529

  For more troubleshooting, see How to troubleshoot problems that occur when you write data to an optical disc CD-R or CD-RW in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The difficulty to burn an Audio / or data disc using Windows Media Player on Windows Vista

  OK, so here's my question:

  I cannot burn an Audio / or disk of data using Windows Media Player. For some reason my Media Player is not finalize the discs that I do and he pops to 94% or 98%. I have a TEAC DVD +-RW DVW28SLC ATA Device. CD-ROM/DVD-ROM drives.
  Has anyone experience this problem with Windows Vista?
  Thanks in advance,
  Melissa
  Hi Melissa,
  Thank you for writing to Microsoft Communities. I understand that you are facing problems when burning a DVD in Windows Media Player.
  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.
  1. What is the format of the file you are trying to burn?
  2. do you have a third-party CD/DVD burning software installed on the computer?
  3 have there been recent changes to the computer before the show?
  4. are you able to burn through windows Explorer?
  Let's try the following steps:
  Method 1:
  You can take one or more of the following, and then try again:
  a. Verify that the CD burner is properly connected.
  b. clean the disc and verify that it is not damaged.
  c. try a different brand of blank discs.
  d. If another program is currently burning files on the CD, wait until the burning process is completed.
  e. Quit other programs that may be using the CD burner.
  f. restart Windows Media Player.
  g. restart your computer.
  Method 2:
  You can try the steps to solve problems in Windows Media Player
  Please return to the State of the question so that we can help you better.

• burn to disc in Windows Media Player

  Windows media player does not accept one of my discs to burn music

  Windows media player does not accept one of my discs to burn music

  ======================================
  Your burner working properly with other software?

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Make a mistake 99% encoding when burning to disc using Windows DVD creation

  Original title: DVD burn problem

  When I tried to burn my movie using windows dvd, it was encoding and reaches 99% and said error occurred, could not burn disc, I used and the .avi format, what do I do?

  Disable all filters can be worth a try...

  See the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll down for...) What to do in case of problems)

  Also... the following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Ulead, etc... but at least it is a start.

  Good luck.

• How can I burn an ISO 9660 format disc in windows 7 >

  I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Windows 7?

  I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Windows 7?

  ========================================
  The free ImgBurn is perhaps what you are looking for.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (works on XP, Vista, 7) (to download... left click on the green)
  spot with the white arrow: "Click here to download")
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  Also... See the following screenshot:

  Find the 9660 option
  http://i47.Tinypic.com/2qiradw.jpg

  ImgBurn - create the file image from files/folders
  http://grok.LSU.edu/article.aspx?articleid=15771

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

• Carpet * a DVD-RAM UJ-820 s do not read or burn discs

  Hi, I'm Natalie and I need help with my problem that occurs.

  Operating system:
  Windows XP Home Edition
  Laptop Toshiba Satellite
  Model A75-S229
  Multi recorder drive: CD and DVD

  The problem that happens is that I can not get any CD or DVD to work when I put them. What is happening is he's trying to load but makes the window "Not responding", unless I have the disc, then everything will be fine. What is also involved, is that I can't burn discs at all, at any speed.

  Also, I would add, when I go to my computer > right click on the DVD - RAM drive > properties and under the general tab it states:

  Type: CD player
  file system: unknown

  I don't know if that's the problem...

  Can someone help me?

  HI Isabelle.

  Please check in the Device Manager to see if there is a problem with your optical drive. Normally this will be displayed as an exclamation point against the device.

  The fact that the file system is listed as "unknown" is because the drive could not read the format of the disc so that Windors Explorer cannot identify any file structure.

  Your problem could be something very simple like a lens dirty or a faulty device driver. It is not easy to tell from your description exactly what can be wrong, but I would say you try some of the easy options so try first to clean the lens, and if this does not resolve your problem, then try to remove the drive (Device Manager) and reboot for the device will be installed new.

  If all else fails, you will have checked player be an authorized Service partner.

  Kind regards

• Re: Satellite P200 - TS - L802a Won't burn DVD on Windows 7

  I have a Satellite P200. Due to the original HDD becomes full, I installed a new drive hard more - and installed Windows 7 Ultimate on it. I can't get my DVD burner to work (TS-L802a). The DVD player is fine because if I put the old hard drive back (Vista) it works perfectly. I have the 6.1.7601.17514 (TF32) firmware installed. I tried to upgrade to the WinVup2_L802A_RATO35 however the installer does not recognize that there is a DVD player - even if it will read DVDs without problem. It says update is not available and the Start button is grayed out.

  I searched high and low for a solution and I'm out of ideas. Can anyone offer a solution please? Thanks in advance.

  NB: I have not upgraded from Vista - I bought Windows 7 to install on new hard drive.

  Hey,.

  > even if it will read DVDs without problem
  This means that DVD burning function is affected, but you can play DVDs without problem, right?

  Well, this could be also related to the brand of DVD. This DVD you use for burning discs?
  I m using the DVD - R Verbatim and TDK. The two brands works fine on my laptop.

  What burning software do you use? Have you tried with CD Burner XP?

• Burned discs are not playable except on my computer

  Burned discs are not playable except on my computer!  How can I solve this problem?

  Hello

  Use the mastered Format to burn the discs, so you can read about other players. Even their use
  in a car drive.

  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Burned CD does not not in car CD player
  http://www.andybrain.com/archive/MB/burned_cd_in_car_player.htm

  Why the CD player in my car does not play the CD that I burn?
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0091.mspx#EKF

  Check with the experts here
  http://Club.myce.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What burning CDs in Windows Media music system prepares all the files listed.

  What burning CDs in Windows Media music system prepares all the files listed.  When the system starts writing the files on the disc it gets through about 4 songs and then goes to finalize the disc and ejects the disc.  The disk does not appear to have anything on it.  Can I do anything locally to solve the problem?

  My system is XP.

  I burned the disc a lot in the past

  There has been no major changes to the system

  The files I am to burn to the disc are previously ripped files on the disk hard, some of them were burned on another drive before.

  I tried to slow down the burn speed, but that did not work.

  CD burning problem

  Hello

  • You receive an error message when burning CDs?
  • What were the changes made before the issue started?
  To resolve this problem, do one or more of the following and then try again:

  a. Verify that the CD burner is properly connected.

  b. clean the disc and verify that it is not damaged.

  c. try a different brand of blank discs.

  d. If another program is currently burning files on the CD, wait until the burning process is completed.

  e. Quit other programs that may be using the CD burner.

  f. restart Windows Media Player.

  g. restart your computer.

  h. use the Windows error-checking tool to find system errors of files with bad sectors on your hard drive. For more information about the error-checking tool, see Windows Help and Support.

  You can check: http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C00D10DA&contextid=30&originalid=C00D0019

• My count does not recognize a disc in my D drive and so I can not burn discs.

  When I try to burn discs, I get error messages telling me that there is no disc in the drive, when there is a disc in the drive.  Help me

  Hello

  1. have you installed any third-party CD - DVD burning software?

  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.