Burning BluRay PE8

Similar Questions

• can I burn bluray with my laptop?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! I have a windows vista home basic 32-bit laptop with a dvd burner can I burn bluray discs or do I need to get a new drive or even worse, a new laptop, I would be really grateful for the help

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I have a windows vista home basic 32-bit laptop with a dvd burner can I burn bluray discs or do I need to get a new drive or even worse, a new laptop, I would be really grateful for the help

  You cannot burn Blu - Ray discs with a DVD burner. You will need to get an external Blu - ray drive, get a shop to buy a laptop with a blu - ray player or put a new Blu - ray player on your laptop.

• Functions of burning Bluray is possible in Windows 7 Home Premium

  Error message: "There was a problem burning this disc - the disc was not burned successfully. Make sure you have the latest firmware for your CD/DVD burner installed and then try again"

  I'm using (2) readers of DVD bluray LG BH14NS40 in the Windows 7 Home Premium environment.

  1.) my bluray LG BH14NS40 Will perform ANY engraving using Windows Explorer? Yes or no? Please explain.

  2.) while using my BH14NS40 LG bluray DVD drives in Windows 7 Home Premium environment, do I need to buy a bluray of third-party software to perform ALL my burning burning?

  It's too bad Microsoft couldn't this beast on the nail head & give us this feature bluray/burning within Windows itself.

  Lexx Luthor

  Smallville

  Well, that's great - it works, it works! I set AutoPlay to say 9 Power2Go of Cyberlink to start when a blank CD or DVD disc is in the tray & it works like a charm. In fact, I burned my first session successfully using my bluray on a blank CD - R disc player. Burned in a series of songs on the CD with no other problems. Spread the word. Laughing out loud! Be well & thank you for all your help.

  Visit this link to get your free copy of the bluray burning software. I said that it was free, right? Free is good. ;-)

  http://www.CyberLink.com/stat/product/Power2Go/ENU/9/essential/essential-static.jsp

  Lexx Luthor

  Smallville

• How eval without burning bluray disc image

  How eval bluray disc image witout burning?

  Not all players will launch a file, and some that will not evaluate the navigation correctly.

  I use Total Media Theater 5. Here, you "open disk file. VLC player works too: in windows Explorer, I find the name of a folder on drive BD (for example "BD project 5" and inside that is two folders - "BDMV" and 'Certificate'), do a right click and «read with VLC»

• Burning BluRay DVD on Mac

  I just installed PRE 9.0.  Is it possible to burn a BluRay DVD on a DVD-R with PRE 9 media?  In other words, you can record AVCHD with PRE 9 discs?  It would be a plus to have rather than investing in a BD burner.  Apparently, Toast 10 can do that.

  > burn a BluRay DVD on a DVD-R media

  The specification of the DVD does not HiDef - link for DVD Demystified FAQ http://forums.adobe.com/thread/544206?tstart=0

  I think you MIGHT be able to create a SHORT video BluRay that you write to a folder on your hard disk, and then write this file on a DVD... but you will not be able to play the DVD in a DVD connected to a TV player, you will need a Blu - Ray since a DVD player player can't play HiDef material

• Receiving the message 'Fatal Error' when you try to burn BluRay

  I've completed a project of BluRay and I am trying to burn on a DVD.  The process fine until it starts the burn process.  The project is about 19g and I am ttrying to burn to a 25g BD - R bluray.  It takes about 6 hours to go through the process.  When the progress meter displays 100%, it goes into the process of engraving and after a few minutes, I get the message "Fatal Error" and it is she, not other messages and nothing written for the bluray.  I find myself clicking on the "cancel" button which takes back me to the project.

  Execution of the Elements 7.0 on Windows 7 with a lot of horses.  Can give specifications if anyone thinks that this could be the problem.  Is there a way to burn the HD project to the computer and then use other software to burn on my burner internal Bluray?

  Use sharing/Personal Computer / MPEG with the 1440 x 1080 preset.

  It should load right in DVD Architect Studio and give you great results!

• Envy 17: Burner Bluray upgrade for Envy 17 w/touchscreen

  I have a HP Envy 17 w/touch screen, F9M10UAR #ABA model number.

  I want to upgrade the DVD burner to a blu - ray burner.

  Is this possible, and if so what is the part number of HP for the blu - ray?

  Thanks in advance!

  OK, I was looking for a blu - ray burner.  The above is only a BD - ROM (i.e. the readers).  Is there a part number of HP for a compatible blu - ray burner?

• Can I burn an AVCHD Disc in fcpX with a bluray burner

  I'm having trouble sharing a 3 or 24 minutes of video on a BluRay disc and then insert a DVD-R in the bluray burner to burn an AVCHD Disc. fcpX shot of it and said "of the media in the drive cannot be used. " Please insert another disc. ». And Cancel burning is the only option.

  I deleted all the files of rendering and a new rendering, rebooted etc.. I think remember me burning AVCHD discs directly from fcpX before, maybe a year ago. Are updates screwed up, or we cannot burn AVCHD discs in fcpx?

  Then, with TOAST 10.0.09, when I create a master file as. FcpX h264 and then import to TOAST and burn BluRay disc with a DVD-R in it, TOAST now move to it also, saying there is a problem with the source material, 18771 error.

  Fortunately the bluray discs are much cheaper now, right now for purposes of test/video editing, I have to go to the full monty and burn a disc bluray each time to avoid the relentless crash in the process.

  FcpX has an innate ability to make AVCHD discs?

  Chris

  The Druid wrote:

  FcpX has an innate ability to make AVCHD discs?

  Chris

  Yes. But the PCF expects the output of a reader optics red laser (DVD writer), not a blue laser drive. Try using a regular DVD burner for AVCHD.

  Russ

• Re: Satellite A660-15t - read/write Bluray problem

  Hello

  Is it possible to burn a blu ray laptop drives that will play on normal (IE sony blu - ray player connected to tv) blu - ray player? I wrote discs in both formats available in the menu "burn", but neither will play on the sony reader. However, they will play on the laptop.

  Any help appreciated

  Thank you

  Simon

  Hello

  It is possible that you external Bluray player is not compatible with the disk used for burning bluray
  It would also be possible that you tired to copy a bluray disc when the content (film) is protected against copying of blurays wouldn t

• How to solve the error 'No burners' available when you try to burn a video on Blu - Ray (in Premiere Elements)

  I am able to burn a DVD format, but when I select Blu - Ray (a resolution) I don't get "burners available. It is a video relatively short (15 minutes) so not too big. Cannot know what is the issue.  Can offer you any assistance?

  First of all, of course, to confirm that your burner is a burner BluRay burner/BluRay DVD player and simply.

• Been trying for a year to burn Blu - ray successfully, get the error code 3 As_error 97071

  Error Code 3 As_error storage 97071 has losing me my mind. A year in an attempt to burn Bluray

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  The pieces at the end of the 'Code 3' errors etc. BluRay can make all the difference. Yours is a "AS_storageerror" which is specified with a lot of different numbers. But there is no consistent fixes reported.

  All of them seem to have physical storage, hard drive, or media-related questions. Keep in mind that, for Blu - ray, especially, still uses a huge amount of temporary storage. If under windows, make sure that you always use 'administrator' - it fixes many problems. If Mac, make sure that all temporary storage have read/write permissions.

  In your case, google the following with punctuation as it is:

  still + 'storage_error =-97071.

  There are underscore between 'storage' and 'error' and a sign less in front of the number.

  This will help to focus on threads on your particular error.

  Research of recall found no anything, although there are nets with your variation of the error.

• Satellite C660 - 1 7: upgrade internal HDD and writer

  Hello.

  I've recently upgraded the memory on my C660 - 1 7 to 8 GB. I want to improve both the internal hard drive as the DVD to the BluRay player.

  Is there a maximum capacity that I can use for the hard drive? In the past, I had laptops that are limited in their ability because of the BIOS.

  What burner BluRay that I can use or recommend? Is the interface for the command to remove a standard interface?

  Kind regards

  Richard.

  Hello Richard

  I'll try to help you, but can you please tell me how much you paid for your laptop and how much you want to spend for the upgrade?

  You know that the action is not logical for me. I put t know how many it will be cool, but why you didn t buy laptop best with all that stuff inside?
  Instead of buying cheap Satellite C and later spend a lot of money for the upgrade (if the upgrade is possible) why you didn t buy Satellite A665 with the best material, best sound and best design in general?

• I have a Blu - Ray player that does not work.

  I have a HP dv7 1262us running SP2 from Vista and HP mediasmart 222.3309 and a DVD burner/bluray player. I can watch a dvd very well, but when I put in a bluray, he asked if I want to check the updates, I said yes and he flashes on the screen and ask you to check the updates again. I uninstalled medaismart and reinstalled twice and entered in the HP support and installed medaismart dvd v2.20 b2 five times, mediasmart can request to update and takes me on free upgrade to cyberlink website, I do this and it uninstalls and reinstalls the drivers. But still no bluray player. I can also go to windows Explorer and look at whats on the disk, so I know it isn't a hardware problem, but a problem with mediasmart. What should I do?

  Hello

  You can use a free BD player or PowerDVD 10, you can download from the following links:

  FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53029.exe
     http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  It should play fine of BD. A newer version will be delivered with the latest machines.

  Kind regards.

• menu of film - formatted text badly after opening again

  I created the film and the movie menu. I have formatted the text in the menu. I burn bluray. Everything was OK. After a few days, I decided to change something in the menu of the film. When I open the menu movie all the text was poorly formatted. It was different fonts, there was no CR. I had to delete the menu movie and recreate. What has happened, how to avoid this situation?

  For example in attached photo.

  

  josoj

  It is a known problem with menu elements 13/13.1 first when you are dealing with more than one line of text.

  Please confirm which operating system and which version of Premiere Elements.

  The only way found so far to get the final product to have 3 lines of title text for menus in the final product is to customize the theme to the movie Menu in the customization of the Menu movie of the project area, do not save, close the project at this time and can do the burn to. Details are found in article 19 to

  RTA Premiere Elements troubleshooting: first Elements 13 daily discoveries

  The problem is solved in the first 14/14.1 elements, but still elements 13/13.1 first.

  Please take into account and then let us know if the above worked for you.

  Thank you.

  RTA

• "CS5.5 Code 14.

  I'm trying to make a copy of Bluray using MPEG2BR or H264BR coding of material that was shot at the card in AVCHD 1080 x 1920 50I on my Panasonic camera.

  "" "To the end of the period to transcode I get error Code 14" "or error 14" B outdated framework Code "on a 3 period transcode hours during 2.5 hours of material...

  I only have this problem with this particular material things recently with the same settings work?

  On the timeline, everything works and plays very well.

  Have you tried both transcode the original again and exports to the first pro like MPEG2 Bluray... AMD now try Blurray H264 in Pro first, but do not expect a different result.

  Also tried to place the material in Prem elements and attempt a Bluray in there, after a few hours, it hangs and crashes during transcoding.

  Ideas or workarounds appreciated!

  regs

  David

  Hi Jim, thanks for the reply.

  I solved the problem but happy to add the background for others.

  It seems as if the majority of the titles, I added to the default timeline 1440 x 1080 in a project otherwise 1920 x 1080 or I didn't notice settings have changed... has about 10 versions of a master. (Other titles are full of fat!)

  I used sequence of correspondence to export settings because it shows 1440 x 1080 and now burned Bluray material (via an export in Bluray of H264 Pro Prem.). I had tried directly by dynamic link to still and auto transcoding in Encore and it produces the problem, also other settings of 1080 x 1920 because that's what I have set the parameters as initially.

  I, now, I've finished the video and printed for disk, started to try to make the dynamic link as an experience as before but by removing the titles to see if the problem persists. This will have the advantage of full HD material and if it confirms the problem, again the Securities and re burn.

  Cannot say have noticed the title size before or had this problem, but the relief out to disk is great! (Wedding video)!

  Will update you when I go any further, but did not leave this hanging that I very much appreciate the answer.

  regs