C310 PRINTER

Similar Questions

• I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me?

  I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me? I use windows XP. I tried port 5353 and this is what allows to Hello.

  You can check this article, but it's about Firefox itself do not have access.

  http://KB.mozillazine.org/firewalls

  Could you give the exact wording and punctuation of the message and try Googling yourself - when google you do not without importance and punctuation, words of group who are always together as original in quotation marks or hyphens message that google will look for these words together in that order.

• Its carillon of C310 printer

  My C310 printer suddenly started to chime every 60 seconds or more. No error messages and seems to work correctly, the OK ink levels, and I unplugged for a minute or two, too. Nothing in the user manual. The sound is very regular and pleasant - the first time. Now it makes me crazy. How to stop it?

  I don't know what is causing the sound (this is perhaps without wire connected and lost/reconnect each minute?), but you should be able to turn off the sound as follows: touch the screen to activate it, press the light house in the top left corner if it is not already on the home screen.  From there, press the key at the top right and then choose Preferences.  From there, you can select the Volume of the sound effects and put it out of service.

• C310 printed fine when first installed the printer... now I can't print

  I have the new C310 series printer. The installer went well. Print test page, word document and a photo... all great.  Now, a week later, when I try to print what it's that sounds as if it was printing (I hear cartridge move, sounds normal 'printer') but leaves out blank. It is the new printer, new brand of ink cartridges, etc..  Any suggestions? Thank you

  This can help:

  Install a firmware update

  Looking for a firmware update that could help solve the problem:

  1. On the product control panel, tap the Setup icon ().
  2. Support on the Web .
  3. Tap the updates .
  4. Touch of the product updates .
  5. Tap Yes to update. The update can take 10 to 20 minutes. Do not turn off the printer until the update is completed. The printer will stop and automatically start up.

  This procedure comes from this document:

  Troubleshooting print quality problems

• Kodak c310 prints but stopped scanning

  my printer has a reason any stopped my pc regonising in the menu when you print ideas

  Hi Andy,.

  -What version of windows is installed on your computer?

  -Is a printer wired or wireless?

  -Do you get any error message or error code when you try to scan?

  I suggest you to uninstall and reinstall the printer drivers Kodak c310 and check if it helps.

  For uninstallation,.

  http://support.en.kodak.com/app/answers/detail/A_ID/1346/kW/Kodak%20ESP%20c310%20Printer%20drivers/selected/true

  To re-setup,.

  http://support.en.kodak.com/app/answers/detail/A_ID/36670/~/Kodak-EasyShare-software---Windows-operating-systems/selected/true

  It will be useful.

• I recentley bought a kodak esp c310 printer - is this compatible for windows xp

  where can I find a list of the printers compatible windows xp

  Download and install: Home Center software to print all in one KODAK (including drivers)

  Then download and install: KODAK ESP C310 firmware of the all-in-one - printer WINDOWS operating systems

• HP Photosmart C310 print black even with new cartridge

  HP Photosmart C310 cannot print black. Replace the cartridge and ran clean printhead multiple times. Still nothing. Print head alignment failed. Printer does not turn off with power button. Recycled/restarted by pulling out the plug, count to ten and reconnect it.

  Nothing changes except power button works again.

  The steps in this post can help.

• PhotoSmart Premium C310: Premium C310 printer Error Message

  PhotoSmart Premium C310

  New ink, etc.

  Printer error message: 0XC19A0041

  -What does this mean for the future of this printer?  Is dead, or can it be restored?

  Help!

  Gail50

  Hi, my advice would be a new printer.

  8lives

• Photosmart Premium C310: Printer stops after the installation of Ecaptain

  After the installation of Ecaptain, I was not able to print on my C310. When I send the page for the priner it reset my printer (asif you turned it off and back on again) my scaner works very well. I do every thing wireless & it worked fine until I installed Ecaptain

  Welcome to the HP community @scottland,

  I saw your post on the printing problem you encounter when you print from your Mac running 10.11, to your printer Photosmart C310. I have a few suggestions below for you. When you are finished, please let me know the result and we can go from there if necessary.

  First try to make copies of the front of the printer, if the work of copies successfully, try these steps below.

  1. Reset the printing system
  2. Restart the Mac.
  3. Follow this guide: Printers HP - install Mac printer driver using Apple Software Update
  4. In addition, to download this driver: HP v3.0 for OS X printer drivers
  5. Try to print the edition of text and other applications.

  I hope to hear from you.

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

• I have a Photosmart Premium all-in-one c310 printer. It will not print black.

  I tried changing the cartridge and still no black.  I also get an error message when I try to align the cartridges.

  Nothing special, just alignment cartridge error.  Any ideas why my black will not print

  It seems that some of the old black ink can be dried in the ports of the printhead from the C310, nyart12020.

  There are a few steps to help solve this problem in the document below:

  http://support.HP.com/us-en/document/c02187415

  The document led to replace the printhead from the C310.  That's when we could use check whether the printer is IN or out of warranty.

  In case of warranty, then call the HP Technical Support on this printer.

  If outside warranty, then you have two options:

  1. You can buy the print head for a printer C310 from the HP parts store by searching for the CN642a part number.
  2. We can try a step not sanctioned HP to attempt to manually clean the printhead across a dipping process.  Information for how to do this can be located underneath:
     http://h30434.www3.HP.com/T5/other-printing-questions/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M28623

  I hope this helps.

• Photosmart Premium C310 printer scanner

  I use the Photosmart Premium C310 on a Windows laptop 8.0 with a shortcut on my desktop to the HP Solution Center software. I'll have no problem with that.

  I'm looking in the upgrade the operating system to Windows 8.1 and I ran a software provided by microsoft who checked for compatibility with my system on the laptop.  He said that HP Solution Center was incompatible with Windows 8.1. Is it possible use a shortcut on my desktop for the executable file as I do now?

  Hello martil1,

  Welcome to the HP Forums!

  I understand you want to upgrade to 8.1 Windows, but this Microsoft application said the "Solution Center was incompatible with Windows 8.1. I will do my best to help you!

  Now, if you're going to upgrade this computer, you must uninstall the software Photosmart Premium C310. The reason why because this printer has drivers compatible full features for Windows 8.1. Please follow these steps in order:

  First of all, you want to remove all the HP Photosmart software in the programs and features on your computer. Please follow this HP document uninstalling the software of the printer. If this printer is connected by a USB cable, remove this computer.

  Then, I recommend you clean your Temp folder. Follow this YouTube video to help you to here. Now you can upgrade the Windows 8.1. Once this is done, please install the full features on the site of HP software here.

  Please post your results, I will be looking forward to hear from your part have a good night!

• Photosmart Prem C310: Printer does not appear in the list of printers - but is on the list of devices and printers

  I'm used to be able to print perfectly in any program.

  Now, I can print from Gmail - or I can print from this forum, however in Publisher or Word, or a genealogy program I use, the Photosmart is not one of the available printers listed.

  When I go to Device Manager, I can right click on all the printers I have and see a long list of options, such as set as default printer.

  But on the Photosmart, I right click and only get 4 options; create a shortcut, troubleshoot, remove the device and properties.

  I downloaded new printer drivers and went through Assistant support, rebooted, unplugged and replugged etc.

  I can't understand this one!

  Hello
  
  Thank you for using the HP Forums. You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU
  
  Hope that helps.

• Kodak ESP C310 printer has stopped working

  the printer displays a code 3533 (paper jam) I checked the printer several times and there is no paper jam.  What can I do to fix this?

  Hello

  Your best resourse to hwlp is supported from Kodak.

  Kodak - Support Home Page:

  http://support.en.kodak.com/app/home/src/gosupport/selected/true

  Find answers: Kodak products

  http://support.en.kodak.com/app/answers/list/session/L3RpbWUvMTM2NDY2ODYyMy9zaWQvdnVDUU50bWw%3D%2Fselected%2Ftrue/selected/true

  Concerning

• HP photosmart c310: print ONLY photos 4 x 6-3.7x5.2

  title says it all. I want to permanantly avoid any impression of all the photos of my printer that are not 4 x 6.

  I adjusted my settings of the printer to 4 x 6, added the photo tray in devices and printers, changed the Print 4 x 6 paper, changed the size of 4 x 6 print, cropped and photos up to 4 x 6 aspect ratio scaling. AND ALWAYS MY PICTURES ARE PRINTING OUT at 3.7X5.2... How to fix this? like really solve this problem?

  Hello Frustr8ed,

  So you say that you have a border of 1/4 inch around the photos of 4 x 6.

  You select the checkbox no margins for the release, and it still does not work?

  If Yes...

  How did you install the printer on your Windows 10 machine?

  To print from what application are you using?

  If you have installed the drivers yourself, I uninstall them completely and download the full Set featured from the link below and reinstall.

  PS_AIO_07_C310_FSW_Full_Win_WW_140_408 - 5.exe

  I would like to know if it works.

  PS: It would be unnecessary to completely stop the other paper size options to get the size from 4 x 6 to work.

• C310 printer all-in-one... reloaded software but can not find the SCAN function

  HP Photosmart prem c310 with OS X 10.8.4.     The scan function has stopped working.  I removed the software and begin by downloading the all-in-one driver software on the HP site.  To install it without problem, but the pilot for the sweep feature that used to have an icon at the bottom of my MAC, did not reappear.  I don't find it or it does not exist.  I can't use the SCAN function without going through the application of screenshot on my MAC and I love how that works... its not as clean and user friendly than the driver of HP scanning function.  How to make it work again?

  Hello

  Launch installation once more, don't forget to check the recommended software HP during the installation:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-111986-1&cc=us&DLC=en&LC=en&

  OS = 4142 & product = 4231205 & sw_lang =

  Once you are done go to Applications > Hewlett-Packard and open the HP scanning application.

  Shlomi