C4380: C4380

Similar Questions

• Very confused C4380

  My C4380 has worked fine since I bought it a few months ago.  Today I printed a document which has been a success, but when I went to print later semed printer has lost its connection wireless.  I decided to uninstall aand then install, but I cannot remove the software no matter how I try.  I get "HP install Uninstaller" has stopped working.  So, how I uninstall it?  I just downloaded the software in case the cd is broken. Also on the printer wireless sign on the front of the printer turns off.  I don't know if it's a software problem, or if the printer is at fault, I used a USB cable to see if my pc will see the printer, but that did not work or the other. I printed the HP Network Configuration page, it shows the status of the network is offline and under wireless, status is disconnected.  I hope someone can help me to get the printer working properly.

  Yes, I had someone turn today and it took 3 hours to figure out that there is a conflict between IE8 and HP software.  Serves me right for using a beta program, I will be once again.  Thanks for the reply.

• Pomp A60-106: how to print wireless using HP Photosmart C4380

  Good afternoon

  I confess that I am no expert PC but have spent 4 hours this afternoon trying to follow all the help and support options to turn on my laptop to print wireless using my new HP Photosmart C4380.

  Wireless network adapter appears under control panel, but I can't get the light to come on the front by FN and F8, of the any or others 101 things I tried thorugh etc. Device Manager - I'm sure that there is an easy way, but I can't find it and lose the heart! Can someone offer me some ideas?

  If so please have them step by step so I can make sure I don't miss anything.

  Thank you in anticipation of your ideas...

  Rachel

  Hello

  I'm sorry if this seems a silly question but first:

  Are you REALLY sure have a wireless card installed?

  And the second question:

  Do you have already turned the switch on "ON"?

  Because otherwise, the light will NEVER go up.

  Please give feedback if you tried to change the pit wireless switch 'ON '.

  Greetings

• C4380: Network with C4380 scanning

  Hi all

  I wonder if the network scanning / remote is possible on a C4380 printer.

  It works fine on USB or WiFi as USB scanner and printer connection.

  How can I do?

  Hi StefanoMora,

• printer says offline on my HP Photosmart C4380

  I have a HP Photosmart C4380 and I have problems with it being offline. I followed all of the steps this site told me to do and it remains offline. When I run the diagnostic utility program, he is told that he is online and told me everything is ok, this clearly isn't. Does anyone have any other suggestions out there? Please keep in mind, that I'm not a geek so simply word of language very much appreciated! Thank you.

  Hello

  Start by downloading this tool.

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-NDU&JumpID=ex_r4155/HHO/IPG/ccdoc/network_diag/

  Sound network diagnstic tool.

  Let it run and if that said also that no problem, it could be some kind of security software blocking the connection of programs to the printer that it cannot see the status. Let me know exactly what this tools.

• C4380: C4380 wireless

  I have been using C4380 wireless for the past 5 years with no problems. Recently, I changed my network domestic and necessary for re - configure the installation of the printer. I downloaded the latest driver of the page support and intalled it. He asked how the printer will be connected and I said "wireless". After treatment it asked me to connect the printer using USB. As soon as I plugged this dialog box went "install...". "mode and stayed there for a long time and never came back." I waited for 5 hours and still nothing has changed. I tried with Windows 7 laptop, and it's the same thing. I also tried to delete the installation and once again, but no luck. The printer works fine with USB connection and I don't see the blue light for wireless radio. It's pain...

  Can someone help me...

  Today, it was my lucky day, and the HP driver worked on my laptop 8.1. Printer is installed. This can be closed

• HP Photosmart C4380 [8A36CB] communication error with MacBook OS 10.7.5 more wireless

  Hello

  I get the message 'communication error' when I try to print wireless at a Photosmart C4380 of my MacBook (OS 10.7.5) through a Router 2 GB TimeCapsule.

  The message also says: "/ usr/libexec/cups/backend/dnssd failed ', but I don't know what to do with...

  I tried to de - and re - install, reboot the laptop, printer and router and pull all the plugs in different sequences, first use the USB cable to install wireless and any other help HP... but nothing seems to work (doctor of HP is not available for Mac).

  The weird part is that:

  1. He started a couple of weeks, without having changed anything (to my knowledge),

  2. printing of my iMac works fine (same network, same software, same settings version, etc.)!

  2. printing via the USB port on my MacBook works fine

  3. can I print a test page form "Utility from HP" my MacBook (and of course my iMac but it works very well even when)

  4. I can access the printer through "http://hp8a36cb.local./index.htm?cat=info&page=printerInfo" and there is just no problem not mentioned whether,

  5. the "Configuration Page of HP network' and the 'wireless network Test report' congratulating me for the installation of my printer wireless... but it doesn't work.

  I read almost all messages on communication errors more wireless but that you have not found an answer to my question (yet).

  Is there anyone with a solution? Please?

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Photosmart C4380 all-in - One Printer router change

  I have a printer all-in-one C4380 print wireless from my laptop until I changed my router myBT to a BT Hub 3. Since the installation of the new hub, I can no longer print wireless. How can I change the settings on my laptop to accept the code of wirelss Hub?

  Try here.

  Replacement of your wireless router

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• MS Office 2010 and C4380 printer driver

  My printer driver C4380 to work seamlessly with MS Office 2007. After installing MS Office 2010 I find there seems to be a conflict between the HP printer driver and print MS office dialog box. For example print double-sided is very difficult. I have to fix double-sided in the dialog boxes and then the MS Office dialog box seems to replace the HP printer driver and print the second series of pages on the opposite side in reverse, which I can't seem to change.

  Is there a setting in the dialog box HP or MS Office that I'm missing?

  ancient - mariner wrote:

  My printer driver C4380 to work seamlessly with MS Office 2007. After installing MS Office 2010 I find there seems to be a conflict between the HP printer driver and print MS office dialog box. For example print double-sided is very difficult. I have to fix double-sided in the dialog boxes and then the MS Office dialog box seems to replace the HP printer driver and print the second series of pages on the opposite side in reverse, which I can't seem to change.

  Is there a setting in the dialog box HP or MS Office that I'm missing?

  Hey David,

  This problem only occurs in Office 2010? Is also double-sided printing the only question? try ingnoring the word 'Set' and rather go in my printer properties, select the finishing tab and select "print on both sides (manually). This should copy double-sided working properly.

  Thank you

  Sean

• C4380: drivers and software

  looking for driver and software download for my c4380 all in one printer not found in support

  The Vista driver for the Photosmart C4380 can be downloaded from the website of HP here.

  If for some reason that link does not not the direct link is here:

  http://ftp.HP.com/pub/softlib/software10/COL20274/MP-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe

• Printer: try to connect a HP Mini laptop with a HP Photosmart C4380 printer.

  I have a laptop HP Mini and I have connected an HP photosmart C4380 printer by plugging the cable from the printer to my computer and follow the instructions to install it.
  The installation went well but when I try to print, there is an error message and the file goes on the line (there is no detail on the error).
  Is it necessary to install a CD of the printer before? If so, I never saw... What can I download it from the HP site and if yes, can you me how...
  Thank you very much... Angelo

  Download a Vista driver for your printer.

  Support for drivers &
  http://welcome.HP.com/country/us/en/support.html

  Do not plug your printer when prompted to do so. Must be supplied when you connect.

  I hope I could help

• HP Photosmart C4380 wireless light

  I use a MacBook Air running Yosemite 10.10.3, sharing a wireless router with my HP Photosmart 4380.

  Recently I have had problems and do pass on messages in the print menu that the printer is not detected. Blue wireless indicator is brighter.  Now, my fall is back to connect my USB cable, which is not convenient to aleays.

  Someone, please let me know how to "reboot" of the printer so that the wireless lights to indicate this function still works?

  I am pleased to confirm that, after trying all the suggestions, I finally managed to solve my problem.

  It became apparent that the C4380 had lost all its settings and therefore could not send its wireless capability.

  So I used a MacBook with a CD player, running the Mavericks, to install from a CD of the HP Installation. The installation program, allowed me to restore the function wireless and BINGO! It all works now.

  Thank you for your efforts!

• HP Photosmart C4380 is not scanning

  My iMac screen running OS 10.6.8 and connected to a HP Photosmart C4380 has always printed reliably of keyboard commands. Scan never works, either the computer or directly to the all-in-one device. C4380 window then displays the error message "USB or wireless not connected" when it obviously is! My HP software update reports that I am up to date.

  I saw a previous response that said that 10.6 is incompatible with the scanning. Is it still the explanation, or is it now a workaround solution. Help, please

  Ionizer 76

  No, your Mac must print and scan with a C4380 without any problem.

  However, if you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with 10.6/7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Download and install this: support.apple.com/kb/DL907

  Finally, restore the print system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Software HP C4380 fails to install on Win 7 64 bit

  My printer HP C4380 scanner no longer works, so I added another printer with scanner to work on my wireless network, but then I couldn't have my C4380 HP to run even if it was by default, so I uninstalled the other printer because I prefer my HP.  After uninstalling the other printer, I couldn't run my HP at all.  I got the message that it was not connected.  I tried electrician.  No luck.  Then, I did scan and printing doctor who told me to uninstall and reinstall the software.  I uninstalled and then to reinstall my HP cd and received message it did not meet the requirements of the system (Win 7 64 bit).  I went online and tried to reinstall the software C4380.  The software seems to be installed, but my printer looks like a rectangular box "unspecified" in the peripheral topic instead of a printer under "printers."  So now I have no printer.  How can I fix this problem?  Thank you.

  Hi EvelynMae,

  Welcome to the HP Forums! I see that your HP Photosmart c4380 software fails to install on Windows 7. I am

  happy to help you with this problem! I have a few questions for you:

  • Can you make copies with the printer?
  • Did the cable feed plugged directly into the wall, or a surge protector? Questions when it is connected to an uninterruptible power supply/Strip/surge protector power.

  In the meantime, I'll try uninstalling the softwareand then re-install again, using the printer HP install wizard for Windows.

  I hope to hear from you and have a great day!

• How to make my printer hp c4380 series on windows 7

  My Hp photosmart C4380 series printer will not load on my new laptop that runs windows 7.

  Hello:

  Here is the link for downloading full of features Windows 7 driver and software for your printer.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3221640&prodNameId=3436556&swEnvOID=4062&swLang=8&mode=2&taskId=135&swItem=mp-76047-2

  Paul