C7280 All in 1 - point fax work

Similar Questions

• HP Photosmart C7280 all in one installation with windows 8.1 problems

  Hello

  I have a HP Photosmart C7280 all in one printer which worked very well on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Subsequently the printer would not work and I got prompt/warning message to re - install the printer software. And I went to the control panel and deleted all the old HP software, tried to re - install the last being on the HP site... nothing will do.

  I tried to do a number of ways - manual download, download the HP software that determines what software is required, then it downloads for you...

  It seems to start unpacking all right, but then gets stuck on "Checking system" and never progresses to something else. Help!

  Hello Cam77,

  Welcome to the Forums of HP's Support. I see that you're having trouble installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.

  I have included the Windows 8: the progress bar on the Software Installation stops or stalls document. It will guide you in the steps to get the installed printer.

  Please let me know if you are having difficulties while doing the above. If you do, please let me know at what stage things are ugly and said error messages. Please also indicate how you have the connected printer (USB cable, ethernet or wireless). Thank you.

• Satellite C660 - the mouse pointer stops working when you start program

  Some features:
  Toshiba Satellite C660-1r1
  Windows 7 sp1
  Avast Antivirus (free version)

  Problem:
  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs! When I go into Device Manager, my synaptic touchpad and my hid mouse is working also. When I press ctrl - alt - del, the pointer can move again, but when I come back it stops again. I have a work around is not a solution

  When I disconnect my windows account and log in again, it will solve the problem. When I start a program again the pointer will freeze up again.
  I did a complete system of virusscan and a pre start virusscan and my laptop is virus-free.
  I uninstalled the mouse and in drivers reinstalled synaptics them but that has not worked. I added a new account windows but that did not work.
  By pressing the keycombo FN + F9 has no effect.
  I am somehow at the end of my ideas...

  Can anyone help!

  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs!

  This problem happens using the touchpad only or have you noticed the freezing of cursor using the external USB mouse too?

  What is the notebooks touchpad works properly without loading and using this 3rd party software?
  For example, work the touchpad with Microsoft office (Word, Excel, etc.) or navigation in internet by using IE or Chrome?

  My guess is that the pre-installed 3rd application part could affect the functionality of the touchpad.

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.

• 7640 envy printer e-all-in-one: 7640 envy printer e-all-in-one: no fax tone

  I recently bought this printer to replace an older HP all-in-one. Everything works fine except that I can't get a dial tone to the fax, only a busy signal. We have a phone system 2 lines Uniden, so a divider is used to the telephone wall jack. The fax line is our second phone line. I have not had any problems with the old printer, replaced. Yes, the phone cable is connected to the right places - 2 between the separator and line 1 of the printer online. Any suggestions or, I hope, a solution? I don't understand the instructions of connecting the answering machine directly to the printer, because the answering machine is not an independent unit, but part of the Uniden phone system. Not that it is important, but AT & T is our telephone service provider. Apart from this question, this printer is fantastic!

  Thank you!!

  SOLVED

• Windows will start, the screen starts flashing and then the screen say Logging Off, then restore the screen to the CTRL ALT DEL all other functions will not work.

  Start my computer, it will default to the CTRL ALT DEL screen.  After graduating in the login screen I enter the password.  Windows will start and then the screen starts flashing and the screen say Logging Off, then restore the screen to the CTRL ALT DEL I can boot into safe mode.  All other functions will not work.

  Thank you

  I guess you wanted to ask how to solve the problem. If then all in Safe Mode you can use system restore to set up Windows to a point when the problem did not exist.

• C7280 all in the a photosmart printer wireless problem

  Photosmart c7280 All in One

  Windows 7 64 b

  Unable to connect to the modem

  no change

  This photosmart c7280 all-in-one is no spring chicken, and there were no problems so far. It is connected to 2 laptops via a Qwest wireless modem. After that be able to connect to the printer for a week or two the ability to access the printer has disappeared... printer shows offline. To resolve this problem, I had to redo the SSID and WEP information and it would be upward. Today when this 'fix' again once he could not find the modem even if I am connected to my office at the top of the page and online. I had unplugged the modem and brought up in power go online without a problem, I so I stop the 7280 and restarted, is returned to Setup Wizard wireless, put in the news and hit OK... it has started the search for the modem then hooked! Unable to do anything, power button did not work, had to pull the plug to get it to turn off. Back on and everything but the wireless worked, did this x 4 with the same result. Is there a separate card to control the wireless function? It is replaceable and it sounds like the likely cause of the problem?

  Thank you, Bob

  Looks like the wireless card has failed.  Print a network Test Wireless in the network menu on the front of the printer.

  If she does not, reset the printer by turning it off, keeping the # 6 keys while a few seconds after turning it on.

  If the radio is toast, it can be practically replaced.

• C7280 all-in-One connected wireless to modem-router needs a password when it is fed - up.

  Do you have examples of wireless connection to a HP Photosmart C7280-all-in-one to a network managed by a modem-router method NB6Plus4W? The modem-router attach also your desktop of Windows XP by using an ethernet cable and a laptop computer to Windows XP wireless using the default (wireless) SSID and password (a1b2c3d4e5).

  The wireless connection between the modem and router and the laptop happens automatically when the modem-router and laptop computer are powered.

  The wireless connection between the modem-router and the HP Photosmart camera does not automatically. When I put power on the HP Photosmart camera, I then use the setup on the Photosmart button and type manually in to the Photosmart (a1b2c3d4e5) password. The SSID also displays wireless, it doesn't have to be retyped.

  Do you know if there is no method or HP configuration that will result in the automatic installation of the camera HP Photosmart to occur when it is powered?

  What I am complaining about is having to manually type in the HP to HP password whenever the HP is powered.

  Go to Setup > network > advanced settings > IP settings and now select Auto and press OK. See if this stops the question.

  If that doesn't work, then go to settings > network > restore default settings of the network, and then run the Wireless Setup Wizard to connect to the network.

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• Problems with my laptop and my HP C7280 All in One Printer

  I have a network problem which gives me fits. I have a HP Wireless HP C7280 All in One Printer in one of my rooms where my desktop computer. My son and I have all two laptops that we have been able to use wireless network mode to print on the 7280. One day that my laptop (HP dv5-1002nr) even though it shows I am connected to the IP address of the printer, no longer cause the 7280 printing. All parameters show that I am connected, but when I print and go to device settings it shows the document is waiting and then print, but nothing prints from the printer itself.

  I checked all the network settings, reset everything again, downloaded the latest drivers and all without success. Today, my son has had 2 other laptops and was able to print wireless to the 7280 and it was also able to print wireless from the desktop in the same room as the printer, so we know that the issue is not with the printer. Some of these laptops are also HPs.

  At first I thought that maybe there was a problem with my LAN driver but check that and everything appears to be functional and up-to-date. What is strange, is that I can email this cell phone to my modem wireless of course work in this regard. However, no matter what we did to make sure that all our drivers and settings are correct, we are still unable to make the printer print.

  Anyone have any ideas because we are totally frustrated.

  If it looks like your question:

  After you install the product on a network, you turn off the computer, and then, and the product loses functionality. The product is no longer prints and disappears from the icon of the product in the menu devices and printers in Windows 7 (64-bit).

  Try this fix:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-89191-1&LC=en&DLC=en&CC=US&OS=4063&Product=4022343&sw_lang=

• Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  How can I solve this problem?

  Other suggestions for this problem has not worked for me, but the info at this link on how to reset the computer worked! I thought I was headed to the store to buy a new printer, but this fixed.

  http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1/

• All my modules do not work! Help, please!

  Today I turned on my computer and after FireFox starts, I realized that all my modules don't work at all! When I tried to check all have been properly installed and implemented market, but anyway, I didn't see their options in the Tools menu or the contextual menu (which appears when you try to save an image, CCI). My main modules (that I use constantly) are DownThemAll, ImageHostGrabber and NetVideoHunter. None works! And when I tried to "restore my last session", he has not worked as well! (It was in FireFox 11). A coupla hours ago I installed the latest version of FireFox 17th, hoping it would help me solve the problem. Nope! There is none! And by the way, now my "Add-ons" page in the Tools menu just does not open! I already scanned my computer for the bugs and viruses (with 2 specified programs) and found nothing! So I just the hell can understand what the problem is and where it could come from! Help, please! I don't want to install GoogleChrome or any other browsers and wasting my time to import links, fix bugs and various modules, etc.!
  I just need to my FireFox good old (now the most recent, in fact) works correctly and that's it!
  I thank you very much in advance!

  Thank you to everyone! But I found a solution easier - I saved just my FireFox to the base and then added settings on all necessary extensions. Everything works fine now! In any case, I understand your willingness to help: it's really comforting to feel that I'm not the only one!

• Is it possible to automatically check all bookmarks, then remove the works do not bookmarks

  Is it possible to check automatic all bookmarks and remove the works do not bookmarks

  Try this extension:

  • CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/

• Can not stop "auto crop" documents, scan on my HP Photosmart C7280 all-in-one

  I use a HP Photosmart C7280 all-in-one to scan documents.   My OS is Windows 7 64 bit.   I have used this configuration since January 2012 and my problem has just started in the last 30 days.  I did not any changes to the system except for the automatic updates of Windows coming out.

  I unchecked the box "automatically Crop scanned Documents" in the Advanced Document settings, but as soon as I scanned a page, the checkbox appears in the box again (in itself!) and it will automatically crop a bad document.

  No idea why this is happening and what I can do about it?

  Thanks for your help.

  Not really sure what caused it, but looks like the setting has glitched somewhere along the way and will be set when past.  Try unintalling to reinstall a new download.  Let me know what happens.

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor