Calculator command stack 2014 tiara

Similar Questions

• How to recover formulas of the command stack?

  I'm making calculations across multiple data. I use the calculator to perform all the calculations. Stack command saves the last 20 transactions but I play more than 20 operations, and I would like to have access to see what I've done the calculations.

  There is no option file - save as the Analysis tab. How will I know what calculations I did on the channels, if I can't access the command stack formulas?

  Thank you

  Vandenplas has

  Hi Vandenplas,

  What version of DIAdem do you use?  If you are using version 11.1 or later, then I would recommend that you spend the channel for the calculation Manager calculator, which allows you to save and reload any number of calculations, as well as to bind the results of some on other entries.

  If you are using DIAdem 11.0 or earlier, then I recommend you to run the calculations of 20 + with a VBScript, using the ChnCalculate() command.  The interactive channel calculator was designed for fast interactive calculations, not tons of sequential calculations you want to use again and again.

  Brad Turpin

  Product development engineer of Suypport tiara

  National Instruments

• * With examples (script), the script calculation commands *.

  Dear Guru,
  
  I'm new recruit in Essbase.
  
  I am easily understand Essbase calculation scripts except. Recently, I've studied Essbase Ser60 Pdf. But I need scripts of calculation with examples (with scenario) to understand easily.
  
  any suggestions would be very helpful.
  
  Thanks in advance.

  Do a search through this forum and the Essbase54, you see a lot of examples, or just start to scroll back posts.

  Also begin to develop some tests on your own, the best way to learn is to try.

• The value of path as unit target in the calculation Manager

  Hello

  is there a way to define a course of treatment as unit target in the calculation Manager? I have data with unspecified units (for example, deg_Cel ° C) then I disabled the calculation of the amount in function. Now I want the result channel have the same unit as the first input channel (something like @@ChnUnit (N) @).

  Best regards

  Martin

  Hi Martin,

  You can launch the Manager of calculation without management unit (turn based on the amount off the coast).  You can set the property unit of the resulting string with ChnDim() to be of the same unit as the starting channel.  I guess you do all that with a VBScript.  You actually run the Manager calculation by hand with the mouse?

  You can add as many lines of VBScript code that you want at the end of the normal equation.  Here is an example of calculation which comes with tiara:

  P = n * (2 * Pi / 60) * M * (1 / 1000)

  If you click the button, you can add the following line of VBScript call second to run the equation:

  Calculate the call ("P = n * (2 * Pi/60) * M * (1 / 1000)", CurrSymbols, CurrValues, "kW")
  
  ChnDim (P) = ChnDim (n)

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• stop the script with labview

  Let's say that I run a script using the "DIAdem"run script.vi"due to the demand of the user.  Later, the user wants to cancel because it took longer than expected.

  How to stop the script using labview tools?

  Jim

  Hi Jim,.

  It is possible, but not in the way I think you hope.  I don't know any way to end a VBScript script running in the DIAdem of the 'outside '.  If you have been watching DIAdem you could hit the key, but a subsequent application of LabVIEW goes in "Script stack" of DIAdem and does not run until the first VBScript happens naturally.

  Of course, you need to run all your calls of LabVIEW to Sophie in an asynchronous way, or does not.

  If you can do is set up each VBScript that you think you might want to abandon to periodically query a global variable of tiara, say "B9" and end of inside the VBScript if B9 = TRUE.  LabVIEW DIAdem (ToCommand) command interface will stack Script tiara, but variable interface of LabVIEW DIAdem (ToDataSheet) does not work.  If you can "poke" during execution of the first VBScript variable B9 of LabVIEW and influence its behavior, but only if and when this VBScript uses this variable (B9) get bitten.

  Of course, none of this helps if your VBScript is busy waiting for a simple VBScript command to run, and it helps only if your VBScript executes several activities, among which it can interrogate the variable (B9).

  Hope that helps,

  Brad Turpin

  Tiara Product Support Engineer

• Instant hard drive failure

  Hello

  I bought yesterday new laptop HP ENVY 17-j162no. The first time (and each time later) I started the laptop, I had a smart drive failure error. I have never on any known computer that even after such a mistake, nothing seems to be broken. I went to the BIOS and ran the examing tool, and you can see the results below. What is the next step to do?

  Thanks for all the answers,

  Arto

  SystemDiags.log

  2014-10-05 11:28:30 =.
  2014-10-05 11:28:30 EFI 5.4.3.0 diagnostic system has started
  2014-10-05 11:28:30 Load Options =
  2014-10-05 11:28:30 former Hii Protocol not found.
  2014-10-05 11:28:30 SysDiagsBiosData2011 Configuration variable acquired
  2014-10-05 11:28:30 pointer absolute Protocol not available
  2014-10-05 11:28:30 found HP thermal diagnosis Protocol
  2014-10-05 11:28:30 1394 controller is not present.
  2014-10-05 11:28:30 BIOS HP Image Interface Protocol Version 2.0
  2014-10-05 11:28:30 found 8 8 active processors, Max 8 processors
  2014-10-05 11:28:30 system family: = 2
  2014-10-05 11:28:30 PlatformLang reported as en-US.
  2014-10-05 11:28:30 selected language is currently (eng).
  2014-10-05 11:28:40 Player library initialization.
  2014-10-05 11:28:40 TscPerSecond = 0B374B73Ch
  2014-10-05 11:28:40 installed protocol commands ATA
  2014-10-05 11:28:40 found installed protocol commands ATA supporting Packet orders!
  2014-10-05 11:28:40 found 1 hard drive.
  2014-10-05 11:28:40 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x8198550F) to drive 0
  2014-10-05 11:28:40 found 1 optical disc.
  2014-10-05 11:28:40 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x81C9768F) to drive 1
  2014-10-05 11:28:40 ATA Total 2 records found
  2014-10-05 11:28:40 no handle found support EFI_EXT_SCSI_PASS_THRU_PROTOCOL (143B7632-B81B-4CB7-ABD3-B625A5B9BFFE).
  2014-10-05 11:28:40 1 hard drive Total records found
  2014-10-05 11:28:40 1 total optical disk drives found
  2014-10-05 11:28:40 found 1 hard drives
  2014-10-05 11:28:40 found 1 optical discs
  2014-10-05 11:28:40 system model: = HP ENVY 17 Notebook PC
  2014-10-05 11:28:40 system SKU: = J1Y81EA #UUW
  2014-10-05 11:28:40 system ID: 1968
  2014-10-05 11:28:40 HDD 0 model: ST1000LM014-1EJ164-SSHD
  2014-10-05 11:28:40 HDD 0 series: (I removed it, let me know if it is crucial to know)
  2014-10-05 11:28:40 ODD 0 model: hp DVD RAM UJ8E2
  2014-10-05 11:28:40 series 0 ODD: (I removed it, let me know if it is crucial to know)
  2014-10-05 11:28:40 DIMM 0 serial number: (I removed it, let me know if it is crucial to know)
  2014-10-05 11:28:40 DIMM 0 Part Number: M471B5173DB0-YK0
  2014-10-05 11:28:40 DIMM 1 serial number: (I removed it, let me know if it is crucial to know)
  2014-10-05 11:28:40 DIMM 1 part number: M471B1G73QH0-YK0
  2014-10-05 11:28:40 BIOS revision: F.62
  2014-10-05 11:28:40 SysDiagInitErrorLog - no record found
  2014-10-05 11:28:40 BattInit: Protocol 2010.
  2014-10-05 11:28:40 from Menu of Diagnostic graphics system
  2014-10-05 11:28:50 selected system test
  2014-10-05 11:28:50 calculation time to Test memory
  2014-10-05 11:28:50 total 12533 MB of memory, Free 12110 MB (3100317 Pages)
  2014-10-05 11:28:50 trust parm buffer
  2014-10-05 11:28:50 test cases Init
  2014-10-05 11:28:50 calculated 0x000000000A9BE058 TSC ticks per MB
  2014-10-05 11:28:50 estimated duration total = 905 s
  2014-10-05 11:28:50 battery test started
  2014-10-05 11:28:50 SmartAdapter: State of the map is 0
  2014-10-05 11:28:50 number of batteries 1
  2014-10-05 11:28:50 BattResetCharger: No.0 (success).
  2014-10-05 11:28:50 BattResetCharger: n ° 1 (invalid parameter).
  2014-10-05 11:28:53 battery 0 returned 0 x 0000000000000000
  2014-10-05 11:28:53 overall result of battery = 1
  2014-10-05 11:28:53 CPU Test started
  2014-10-05 11:28:53 UDM Cpu start test.
  2014-10-05 11:28:53 features BIOS 0x001000004BF99880
  2014-10-05 11:28:53 ===========================================================
  2014-10-05 11:28:53 from CpuDiags.udm version 1.01 built March 13, 2014 15:08:44
  2014-10-05 11:28:53 init complete CpuDiags.UDM
  2014-10-05 11:29:02 test complete CPU - result 1
  2014-10-05 11:29:02 Wireless Module audit completed - results 1
  2014-10-05 11:29:02 test Board full system - result 1
  2014-10-05 11:29:02 SMART Check started
  2014-10-05 11:29:02 SMART Check completed - score 3
  2014-10-05 11:29:02 error code = 0 x 301
  2014-10-05 11:29:02 serial number: (I removed it, let me know if it is crucial to know)
  2014-10-05 11:29:02 guaranteed Start Date: 04/10/2014
  2014-10-05 11:29:02 WarrantyIDString size = 60
  2014-10-05 11:29:02 guaranteed ID = 94NH4J-78M78N-MFGH7F-60FW03
  2014-10-05 11:29:02 path of unity: PciRoot(0x0) /Pci(0x1F,0x2) /Sata (0x0, 0x0, 0x0)
  2014-10-05 11:29:22 completed Test System
  2014-10-05 11:29:24 path of unity: PciRoot(0x0) /Pci(0x1F,0x2) /Sata (0x0, 0x0, 0x0)

  And here's the SystemDiagsCeeHistory.log:

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Dear customer,

  Welcome to the Forum from the HP Support

  Thanks for posting your question on the Forum of Support HP

  I would like first of all to appreciate your effors to solve this problem with your laptop

  I'm really sorry to hear that Your ' e not able to boot into the operating system with your new laptop. I understand how

  He feels when things doesn't work sometimes

  This is to inform you that I have are passed through the error report and did an analysis to arrive at a conclusion. According to the analysis I did the error you posted means 'hard drive is defective or is not & should be replaced '.

  I think the laptop is within 30 days of the date [the Date of the invoice /] you purchased this device. If your answer is

  Yes, this device will be considered dead on arrival and you must immediately contact HP Support by phone for further assistance immediately to get your Notebook, replaced by the Point of sale or directly by HP

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Restore control of a tape file

  Dear friends,

  Version of DB - 11.1.0.7

  I'm trying to restore a database to our Dev envt using production LEVEL 0 backup of the database taken 2 days ago.

  I struggle to restore controlfile from the Ribbon. Here is the command I use-

  How to find the full path of the control when its backup tape file, so I can try to give the full path of the backup? Other ideas, appreciate your help...

  RMAN > run
  2 > {}
  3 > ALLOCATE CHANNEL a1 DEVICE TYPE 'SBT_TAPE' PARMS 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo_hst_fs1.opt)' FORMAT '% d_ % s_ %%t p_;
  4 > restore controlfile autobackup.
  {5 >}

  output channel: ORA_DISK_1
  allocated channel: a1
  path a1: SID = 1105 instance = hapoy01 = SBT_TAPE device type
  path a1: for Oracle Data Protection: version 5.5.1.0

  From restoration to June 24, 14

  Search AUTOBACKUP format '%f' not tempted because DBID has not been set.
  output channel: a1
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command to 2014/06/24 14:10:53

  How to find the full path of the control when its backup tape file, so I can try to give the full path of the backup? Other ideas, appreciate your help...

  You need not know or give the full path of the controlfile.

  Just connect on catalog RMAN of PROD of database and use DBID, find it on the backup logs or "SELECT DBID FROM V$ DATABASE" on the PROD DATABASE

  for example

  target of $ rman / catalogue user/pass @.

  RMAN > RUN {

  SET DBID ;

  UNTIL ' TO_DATE (JUNE 24, 2014 00:00:00 "," DD-MM-YYYY HH24:MI:SS') ";

  ALLOCATE CHANNEL a1 DEVICE TYPE 'SBT_TAPE' PARMS 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo_hst_fs1.opt) ".

  RESTORE CONTROLFILE;

  BOOTABLE MEDIA;

  RESTORE THE DATABASE;

  RECOVER THE DATABASE;

  }

  output

  rman target $ /.

  RMAN > alter database open resetlogs;

  P.S: Cannot OPEN DATABASE RESETING NEWSPAPERS related to the catalog RMAN because it will create a new incarnation on catalog and it will mess your backups of prod.

• How can I check if DIAdem a 32 or 64 bit version?

  Hi all

  How can I save a DIAdem script if a version of 32 or 64 bit? Is there a variable or a function?

  I need this show to avoid loading COM 32-bit objects.

  Thank you

  GEMÜ

  Hi GEMÜ,.

  The variable you are looking for is APPLICATIONBITNESS. The variable is available in 2014 tiara but without documentation. This documentation will be available in 2015 tiara. The variable is read-only and returns an integer (32 or 64)

  Hope that helps

  Winfried

• Script error when you start using the ActiveX API

  Hello

  I try to start the TIARA of c# application and identify the data portal.

  This is the code I use in c#:

  tiara. CmdExecuteSync ("wndshow ('shell', 'normal')");
  tiara. CmdExecuteSync ("ScriptStart ('g:\\Build\\script2.)") (VBS') ");

  The first command is ok, tiara is displayed.

  The other does not, the following error occurs:

  Error in (line: 1 column: 1); Invalid character

   

  I don't understand why, because when I run directly in the tiara, the same script works.
  

  Does anyone have an idea on what is wrong?

  Maybe there's another way to do.

  I want to do this is to automatically erase the data portal when tiara starts.

  For me, it's stupid display sample data in the data portal whenever the software is launched.

  I think that NEITHER should change that.

  Thanks for the reply.

  CFOE

  Hi CFOE,

  Like a lot of our users and our sales engineers have a set of sample data to quickly see the/try features tiara with.

  If everything you want to do is clearly by program data portal, you should be able to do so by placing an order directly to the argument:

  tiara. CmdExecuteSync ("DataDelAll");

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• name of the channel

  Hello

  I didn't go near DIAdem for awhile and now sit here confused on something that is probably pretty simple.

  In the part of my script, I want him to go through all my ways and greate another group bearing the name of the original channel... so I'll go through and perform more advanced in each group analysis. The part that is the source of the problems is to create groups in the first place.

  I have something like this:

  Dim x

  for x = 2 to GroupChnCount (1)

  Call GroupDefaultSet (1)
  nameofgroup = ChnNameGet (x)
  Call GroupCreate (nameofgroup, x)
  next

  Yet, all I get is "Variable is undefined: «ChnNameGet»»

  What I am doing wrong?

  Thank you!

  Hello Tom!

  The error message is correct! There is no command ChnNameGet in tiara. You can use ChnName (CNoXGet(1, x)) to get what you want.

  Matthias

• Little or no connectivity

  I asked this question to the course on the Linksys forums and they told me that they think it's maybe a windows problem and suggested that ask here.

  OK so I have a router linksys (befsr41 v3) with the latest firmware (1.05.00) - I have been usuing for at least 7 or 8 years now - at one point I got 3 computers connected and they have all worked fine. Now I have 2 connected on the router - both are xppro machines - the one I am on now works without any problem. However, the other computer has the limited or no connectivity problem.

  I used this router for years without any problem, then one day this conflict of intellectual property message started to appear.

  I started getting this message from conflict ip on both computers, but only occasionally - it never no problem - if you skipped it - it would simply go away.

  Then a computer day #2 has the limited or no connectivity message - I have simple reboot fixed it. This solution worked several times. Computer #1 has never had no problem with the internet connection.

  Some time later the limited or no connectivity problem is back and this time this reset does not work - I looked for a solution and decided to try to change the speed of the link to auto sense to 10 MB half duplex - this solves the problem. This solution worked several times.

  Some time after the limited or no connectivity reappeared and after some research, I updated the firmware of routers - this solves the problem.

  Some time later the limited or no connectivity reappeared and this time I had to actually uninstall the card NETWORK, restart and then let it redetect the NETWORK adapter and then the problem has been resolved. This solution worked several times.

  Some time later the limited or no connectivity reappeared and the previous solutions did not work to fix - after searching for a solution, I discovered that I could simply unplug the router and reconnect it the and would solve the problem. This solution worked several times.

  Some time later (which brings me to 3 or 4 months ago) the limited or no connectivity reappeared and this time after searching for a solution, I was able to fix by updating the NIC drivers. Problem solved.

  This brings us to today - limited connectivity or none has reappeared and none of the previous fixes the problem.

  When I initially put it worked immediately out of the box.

  DHCP is enabled - everything is set to obtain an ip address automatically.

  Initially, the event viewer on the computer #2 reported lease IP address 192.168.1.100 for the network card with network address
  0xXXXXXXXX refused by the 192.168.1.1 DHCP server. {The DHCP server
  sent a DHCPNACK message.}

  Now the same Viewer just tells me that he is using ip address 169.254.xxxxxx

  I tried all of the previous fixes without result. I tried to just turn off and turn on any return - I tried to reset both the modem and the router - I tried upgrading the firmware again. I even downloaded LELA and installed on both computers, maybe it would detect and don't solve the problem buy no luck. LELA simply tells me that this #1 computer does not operate normally. On computer #2 when I installed LELA, the first thing that trying to find the router and he tells me that it can't find it.

  I tried to uninstall the NETWORK adapter and remove the drivers, restart and then reinstalling the. No luck.

  I tried to set a static ip address on the computer #2 with no luck. When I did these two error messages appeared in the event viewer of the computer #1---

  The master browser has received a server announcement from the computer (#2), who believes it is the master browser for the domain of transport NetBT_Tcpip_ {0876E9A8-C6E. The master browser stops or an election is forced.

  The name "MSHOME: 1 d" could not be registered on the Interface with the IP 192.168.1.100. The machine with the IP 192.168.1.20 did not allow the name to be claimed by this machine.

  If I ping the router from computer #2 it returns 100% of loss.

  If I ping the NIC it is 0% loss.

  I might also add that I can see the two computer #1 and domestic #2 in my network working group on both computers.

  I tried ipconfig enough and ipconfig / renew - I tried one after the other and also a reset in between. I tried clicking on repair in the State of LAN - I have tried to reset the ip with the netsh command stack - I even tried different cables and control switching ports on the router.

  If there is that about sums it up. Suggestions anyone?

  I second assessment of Jack.  I used to have a BEFSR41 router as well and it was almost the exact symptoms I experienced until the router bit the proverbial dust and I bought a new router.  I have not had problems since.

  FWIW,
  JW

• The series of stackable N1500 switches

  Hello everyone

  I'm doing 4 switches a stack but without any luck so far.  I believe I have followed the steps correctly but I don't really know why others do not themselves add to the stack. If anyone has some free time, please have a look at the steps I take below:

  1. the cables that I use are SFP 10 G. I want to use ports 0/1/3 and 1/0/4. I can confirm that the cables are connected correctly to form a ring topology.

  2. turn on the switch 1 (that I want to be the master) and access the switch using hyperterminal.

  3. after a minute or two, I turn on the next switch, then the rest of them.

  3. go into 'operational mode ' and launch the "Setup Wizard". I have then create an admin account and configure vlan1. I enter the IP address, the subnet and the GW

  4 then I follow the steps in this link: http://www.dell.com/Support/Article/us/en/19/HOW10800

  5. once I run 'reload', I restart all switches but they all become unit 1.

  I don't know what I'm doing wrong here. Any suggestions please?

  Your step 1 I believe that you have already connected cables, then to step 4 (where it takes you to another set of steps) it is said to wait and cable together after setting each past mode stacking ports.  I think at this point, you may need to start over and uncable them.  Then go into each switch (which are yet to show that they are offline) and re - run the commands 'stack stack-port 1/0/4 tengigabitethernet' and «stack stack-port 1/0/3 tengigabitethernet»  Make sure that you back up your configuration (copy run start).  Then turn off all switches, cables up to ports stacking in a ring and start all designated captain that they way until you can connect to it.  Then raise the following in the same way.  Run the show command of battery system to display the stack of the two switches works, then turn on the other switches.

  I hope this helps!

  B

• How can I get the accessories in the start menu?

  I tried to make a shortcut to Accessories on my desktop by dragging the icon in the start menu on the desktop. An Accessories folder appears, containing none of the accessories like a painting. In addition, the accessories tab no longer exists in the start menu.

  I know can be found in a search, but I wanted to play with the new programs I've not seen before, such as audio and video capture.

  How to restore the accessories tab on my menu to start? What programs are normally under the accessories tab?

  Thank you.

  Hello
  
  Restarting the computer should replace accessories back to the start menu. Try to restart the computer if you not him have not tried.
  Go to the following locations and check if the Accessories folder is there with all its elements intact.
  C:\Users\\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
  C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Accessories
  Note: You may need to select the files, folders, and drives hidden in Folder Options If you are unable to locate the folder.
  
  Reference: http://windows.microsoft.com/en-US/windows7/Show-hidden-files
  
  You can also try to create a new user account and check the issue:
  
  Here's how:
  
  1. open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and parental controls, and then clicking user accounts.
  2. click on manage another account.
  3. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on create a new account.
  5 type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  Accessories menu start contains the following:
  * Calculator
  * Command line
  * Math Input Panel
  * Notepad
  * Painting
  * Remote Desktop Connection
  * Run
  * Snipping Tool
  * Sound Recorder
  * Reminder
  * Sync Center and more.
   
  The start menu (overview)
  http://Windows.Microsoft.com/en-us/Windows7/the-start-menu-overview#section_1

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• SUM of radio button values

  Hello

  I have a simple form with radio buttons, and I would like to create a formula to extract the values of radio buttons and add them or their average. I have attached a picture of the document I'm working. Don't forget that I am a complete novice that I'm just trying to learn some new skills.

  

  If you apply the values as the value of each field (under Properties - Options) "radio button choice" then you will be able to use the integrated calculation commands to perform these operations.

• CS6 InDesign printing problems

  Having looked at the forums and found Adobe support less helpful as I am jumps that the comunity will be able to help me on these frustrating issues.

  We are conducting a number of issues while trying to print from InDesign CS6 on our printer OKI C830

  Our facility:

  OS: 8 64-bit Windows

  InDesign CS6 version: 8.0.1

  Printer drivers: PS: 1.2.0.0 & PLC: 1.0.7.0/1.1.7

  Printer: Oki C830 256 MB RAM / V1.16

  Problems when printing from InDesign:

  • Printing multiple pages causes an error - undefined offending command stack error
    • After printing the first page with success, we get the above error.
    • I've implemented the fix described in the following link: http://forums.adobe.com/message/2878922#2878922
      • Past the binary to ASCII - this helped as we could then print one or two pages if necessary.
  • Booklet printing - when you try to print a brochure, it seems that the broadcast is not understood by the printer
    • Try to print a booklet of 6 ID, pages are printed on a single sheet of A4/3 of the book at random.

  As a work around us are fourced to create the document ID CS6, and then expoort to ID CS4 for printing.

  Also as a side note, I tried printing of our old HP printers and they work fine. Also, this question was present on Windows 7 x 32 institutions.

  Thanks in advance for any help provided.

  See you soon,.

  Matthew

  OK, this is either a problem in the file, or something about the print booklet setting. You can print the file without booklet print to the Adobe PDF printer? If you can, we explore the booklet printing settings. If not, see Adobe Community: file crashing on exit - print/PDF/other for troubleshooting techniques.