Update BIOS to remove the FRC BIOS of cRIO

Similar Questions

• Mozilla was crashing every few seconds and I could not install the update. I removed the old to install the new and now I can not install - receive error messages that close.

  When I try to install, I get this message:

  "Firefox has stopped working".
  A problem caused the blocking of the program works correctly. Windows close program and you warn if a solution is available. »

  This happens when I select RUN to install Firefox version 9.0.1

  I removed the old version because it was crashing whenever I tried to use it and it wouldn't let me update with the new.

  I HATE IE and need my back Firefox - I'm dead in the water for a job without him.

  You check the Firefox (C:\Program Files\Mozilla Firefox\) program folder disappeared completely?

• After Update February 2013, removing the last picture of Adobe on the slideshow widget standard?

  After Update February 2013, I can't delete the last picture from Adobe on the slideshow widget standard more? Anyone has any idea how?

  I think you are referring to the third stock photo in a slideshow of base that you are unable to delete since the upgrade to 4.0?

  If this is the case, try to browse to the image by clicking on the ">" (next) link mode creation; Select the image of hero and press DELETE to remove completely the third remove the slide show. You can also double-click the hero image to select the particular picture and press DELETE that would make the third blank slide and you should be able to place a new image.

  If the above does not help, try reseating the basic slideshow widget or use the blank slide show which does not contain images of the reserve.

  Thank you

  Vinayak

• How to remove the data files of cRIO

  Please forgive my ignorance, but I don't see how to remove the old a cRIO data files.  I tried to get a functional data logger, and I have some old files of data on the cRIO.  I ftp copies files through IE, but I don't know how to delete the files from the cRIO.

  If you FTP via Windows Explorer, my computer, ftp://adresse IP in the address bar, you should be able to delete the files.

• Last updated by CC removed the content of my. DocumentRevisions folder. HOW CAN I FIX THIS ADOBE? Can you stop using paid users as beta-testers?

  This thread has been going around warning people, but what are the next steps to address this issue?

  The update in question has been removed from the distribution. There is a new update which solves the problem. When you are prompted for the update, you should install it as usual members of creative cloud. If you have problems with the update, please contact customer support.

  Alternatively, you can refer to this blog for more details:

  http://blogs.Adobe.com/adobecare/2016/02/12/creative-cloud-desktop-on-Mac-update-issue/

• Have you the more recent update of Adobe removed the option Save As Image?

  Maybe I'm missing, but I was able to save a PDF as an image in Adobe Acrobat pro. The program updated the other day (maybe it's the update of DC?) and now I do not see the option to save an image.  This feature has been removed, or is it just located somewhere else?

  Check if you are still under Acrobat Pro - that it has not transformed into Acrobat Reader for example.

  You have MacAfee? You have creative cloud?

• How to get out this update failed / cannot remove the circle Reader? Because the update did not finish but remains on hold I can't remove and re-install Acrobat Reader.

  That's where it stops. Restart the update only makes it fail again in the same place. Does not retrieve files from the Web site again.

  

  Assuming you're on Windows, you can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the complete player offline installer from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• Impossible to update - unable to remove the old version and install new - constantly asking me to close Firefox - it IS closed!

  Having been invited to update I clicked Yes. Update failed. I tried to update manually on the site but had to close Firefox before you start - Firefox was closed. I tried to uninstall the old version so that I could install the new le neuf-- once again asked me to close Firefox before it could be uninstalled and again, it was already closed. Stuck now - no idea what it takes to get the new version. O.

  Hi Jean Claude,

  Firefox can always run in the background. This happens sometimes. I suggest that you try to restart your computer, and then try to uninstall the old version. Alternatively, you can try to right click on the task bar, then opening the Task Manager. This will show you the list of processes currently running on your computer. If Firefox is running, you can manually kill the process.

  There is also an article in the Knowledge Base containing information on what to do if the How to resolve the failure of the update of Firefox update error message. There is lots of useful information here.

  Hope this helps!

• Half rest black screen after removing the update

  Hi, I'm very inexperienced that I just took in video editing so bear with me when I don't know what to do.

  On a recent thread, the cause of the upper part of the screen is black has been on a Microsoft update, I had removed the other day and correctly solved the problem.

  However, after opening the program (Adobe Premiere Pro 2.0) today I imported a file into a new project that resulted in half top in black again. Yes, my files are in WMV, because I am just a YouTuber and the format fits to my basic editing and shooting very well (I've seen a lot of arguments about how "dumb", it is to use this format) and this is what format my camera braces on. I made sure the update does not occur, but the question is back. Help?

  -Katie

  the 1st forum for Agency 2 http://forums.adobe.com/community/premiere/premierepro_previous?view=all

  2nd, search for Microsoft http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

• Computer laptop keyboard and mouse does not work (updated Bios and took the batttery)

  I have HP G60-530US.
  
  I read all the posts that talked about updating the BIOS and then by doing a hard reset by removing the power cable and speaking on the battery and then hit the power button for a minute or simply to leave the computer for several minutes.
  
  A lot of people seems to have solved their problems.  Not me.
  
  I updated the BIOS and also did the hard reset like 10 times.  What other options are there?
  
  I have Windows 7-64 bit.  This problem occurred after I did the updates windows 11/04/13 or 12/04/13.
  
  Mouse power switch and the power button wifi button keys are the only ones that seem to work.

  Hello

  Go back to the device, right click on the Device Manager and select uninstall - when it is finished, restart the laptop.

  Any change?

  Kind regards

  DP - K

• Has no updated BIOS on the Satellite X 200

  I tried to update the BIOS on my laptop when the whole system froze for a few minutes and then all the programs that the update has been closed. I tried to restart the phone after about 30 minutes, and then he froze the newspaper off the screen.

  The power button does not work, and given that my battery is full the system is frozen in the newspaper off the screen. Is anyway to turn it off?

  Please remove the dough, wait about 30 minutes, connecting your laptop to the power adapter only, and try to start your laptop.
  Please post the result.

• Satellite Pro M30 - error message: the user is not authorized to update BIOS

  Hello

  I bought a Satellite Pro M30 of second hand. This one has the Bios 1.30... I would like to install the bios v1.70.

  I am running Windows XP Pro SP3 and tried first update in Windows.
  I however got the message "the user is not allowed to update BIOS.

  This message is quite surprising given that I have administrator privileges.

  I read that you can use a floppy disk to update, but I did not...

  So, is it possible to update the Bios with the CD?

  See you soon,.
  R.S.

  Hello

  I checked the page European driver of Toshiba and found the version of BIOS 1.7 WIN in the field of ARCHIVES.

  As you can see, it's a version of BIOS Windows and not a traditional version of the BIOS (trad BIOS can be updated using the diskette).
  This BIOS win can be improved only from a running OS Win.

  In any case, I see that you have installed SP3. It could have a bad influence on the update of the BIOS.
  Then maybe you should try to update the BIOS without SP3 installed?

  Remove SP3, download the good BIOS, unzip correctly and then try to run the BIOS update file.

  _Ps: If you laptop then runs without problem a BIOS update is not necessary! _

  Concerning

• Satellite 1410-604-BIOS update > update BIOS Incorrect in the web?

  Hi there again!

  Now with a new and strange issue.

  We all know that tell old... "If it does not break, don't fix it." And if you put in more computer terms, "especially if it's a BIOS.

  Yes, we all know that the BIOS is something quite dellitate to manage. For some reason, we normally feel as if we manage something like nitroglycerine, or radioactive products. And it's because we all know who is put at risk at the moment: our (or sometimes other) computer, the whole system could end up as dead as some pieces of metal, plastic and son.

  Well. I passed through all of this, more than 10 times in my life, and only once, it went wrong. But since this old motherboard was already dead, it was not important. But I've always been EXTREMELY care. Allways cross checked everything before you do anything, allways has a backup and a way to allways and restore that backup... I did COMPAQ systems, which have been prepared in this way. A BIOS update was about about a disc, turn on the PC with the disk in the floppy drive and wait. And if you don't like the results, you just click on 'back to a previus BIOS' and that was it... very nice. And easy.

  A few days ago a friend gave me a Toshiba Satellite 1410 604 to solve some problems that have been her crazy. After you remove a Norton Internet Security has expired, install avast and scan, I found more than a hundred of files infected with a variety of viruses, malware, trojans, and everything you could imagine. Avast all removed, but the rest of the operating system was so unstable that we decide to format it and install from scratch.

  I asked for the restore disks, which obviously it failed because they were lost in one of his trips. After that we had confirmation of Toshiba representatives there is no disk recovery available for this model, because it is too old, we decided to install from scratch like any other normal PC and resigned to losing some of the utilities accompanying that CD and are not available for download on the Web site.

  I downloaded all the software available for this model, including two updates to the BIOS. (In reality an update, but in two versions: Windows and traditional) and prepared a CD with all the drivers and programs as if it were a new system installation. And everything was fine, no problems at all. Until we arrived at the wireless LAN card, but that's another problem is already solved (the mini PCI card for the WLAN does not support the encriptación WEP or WAP, and it is not possible to connect to any LAN encripted wireless).

  At this point, and when I started setting up and activation of peripheral PCMCIA and USB devices (this computer only supports USB 1.1, 2.0 not) I discovered this text from Toshiba Web site:

  "This Bios update adds functionality to your system.
  (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard.
  When the computer comes on, the BIOS is launched to perform various functions to start.)

  For more detailed updated information, please refer to Information update BIOS Toshiba"

  (you can find it here):

  [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU], you need to search for:

  Archives
  Satellite
  Satellite 14xx
  Satellite 1410 604
  PS141E

  Quite specific. Isn't?)

  According to the information in this Web site, the available BIOS fits the following models:

  "Satellite 2410 414, Satellite 1410, Satellite 1410 - 654S, Satellite 1410 814, Satellite 2410-303, Satellite 2410-304 s, Satellite 1410 354, 2410-601 Satellite, Satellite 1410-401, {color: #ff0000} * Satellite 1410 604 * {color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410 S403, Satellite Pro 2100, Satellite 1410 S203, Satellite 2410-304, Satellite 1410 554, Satellite 1410 S102, Satellite 1410 - 354F, Satellite 2410 703, Satellite 1410-303, Satellite 2410 - S203, Satellite 1410-801, Satellite 2410 603, Satellite 1410-902. ', Satellite 1410-313, Satellite 1410-802, Satellite 1410 714, Satellite 2410-354, Satellite 2410 514, Satellite 1410-614, Satellite 1410 704, Satellite 2410 515, Satellite 2410-504, 2410-702 Satellite, Satellite 1410 S103.

  Yes... it's here!

  Now when you go into the "Toshiba BIOS update information", you get:

  "Ref. FAQ: TRO0000000b07.

  A BIOS update is a {color: #ff0000} * operation is relatively simple and can be done by computer more competent users * {color}. All BIOS updates can be obtained from "BIOS update" Section download click here...

  Note: the BIOS files are specific machine the correct BIOS for your machine should be used. »

  Please note that Toshiba does not disencourage BIOS manipulation, on the contrary: they even encourage people to do. It is not badly needed, but at the same time that they encourage people to 'play' with such a delicate question, at the end of this page, in small letters, they say:

  "Toshiba provides this information"as is"{color: #ff0000} * without warranty of any kind * {color}, explicit or implied, including, but not limited to, the implied warranties of quality market or adequacy has a specific use." Toshiba shall not be liable to the topicality, accuracy, completeness or quality of the information provided. {color: #ff0000} * Toshiba is not responsible for damage caused by the use of any information provided, including incomplete or incorrect information * {color}. »

  This should trigger yellow alarms in our minds.

  + "Human error is inherent in man, and it is not possible to eradicate. It will be displayed always, sooner or later"(Prof. James Reason). +

  And finally, I made the mistake. Although I have read this warning, I remembered all these successful BIOS update with COMPAQ and relied for Toshiba. This update was available there, and Toshiba told me that it was for this computer. Great!

  So finally, I disconnected all devices (USB), removed the PCMCIA (WLAN), plugged the battery charger to avoid any possible battery problem, restarted windows, and then Windows started the update (windows version, such as recommended by Toshiba). This drug looked very nice, nothing different from what I usually see on these old COMPAQs.

  As reported by the update program, the system would restart. And in fact he did.

  Windows normally closed (a little faster than normal, but without mistakes, and since there is no other programs that most - even the antivirus not working - no), the computer turned off, all lights (normal) offshore, and then again on...

  {color: #0000ff} * BEEEEEEEEEEEEP... BEEEP... ... BEEEEP * {color}

  OMG! I never movement something SO bad. 3-1-1!

  And now... What a 3-1-1 is here? Award BIOS would mean no card graphics or video deffective card, but it is not true, because it worked 20 seconds ago. There are BIOS.

  He never came again to life. He's still 3-1-1 beep.

  But now comes the investigation on the human factors involved in this accident.

  I found I committed the following errors:

  * (1) * rely in the constructor, even if they have WRITTEN their information may be incorrect or incomplete. (BAD if I was a detective QA & QC).

  * (2) * I cross checked deep enough (until it was already too late).

  * (3) * I haven't looked above for how to make a backup of the BIOS to restore must anything deceive you.

  * (4) * let Toshiba lead me to a path that I didn't walk, just because of their supply of 'increased functionality.

  * (5) * Beleave in Toshiba when they said "relatively simple operation and can be performed by the most competent computer users"... they never said it is infallible. "."

  Then I began the most interesting part of the investigation.

  {color: #0000ff} * "what went wrong?" * {color}

  Obviously, the update of the BIOS has not somewhere, somewhere. And I wanted to know what and where.

  First thing, I discovered that there is another Toshiba search engine called "askiris" ([http://askiris.toshiba.com]) and I looked to see if, for any chance I could get the old BIOS 1.20 version which was installed at the origin of this machine.

  And I found something... VERY interesting:

  Bq. {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410 *------{color} {color: #800080} * bios for these models. SHUT UP. Downloads. DL. 289838 289838 105481 ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410. 2002-10 - 04 105589... *------{color} {color: #800080} * published 04/10/02 *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415 *------{color} {color: #800080} * FDD Version 1.30 shut UP. Downloads. DL. 357972 357972 105481 ACPI BIOS Flash version 1.40 for Satellite 1410/1415/2410/2415. 2003-01 - 31 105589 PUB... *------{color} {color: #800080} * published on 31/01/03 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.20 for Satellite 1410/2410 *------{color} {color: #800080} * error message when the BIOS TAIS. Downloads. DL. 305240 305240 105481 ACPI BIOS Flash version 1.20 for Satellite 1410/2410. 2002-11 - 01 105589 PUB... *------{color} {color: #800080} * published 01/11/02 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410 *------{color} {color: #800080} * 1) changed the content be QUIET. Downloads. DL. 330963 330963 105481 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003 01 - 03 105589... *------{color} {color: #800080} * published on 03/01/03 | Note: * {color}
  These are: V140, V110, V120 and V130 for 1410/15 and 2410 series.

  GOOD! Or not?

  Let's take a look:

  First thing I did was download all four files.

  Then I took the same version that made the accident: 1.40

  I unzipped the file, which I found:

  2009-06-05 00:17 < DIR >.
  2009-06-05 00:17 < DIR >...
  31/01/2003 08:38 11410v14.iso 1 605 632
  31/01/2003 08:38 511 764 14 1370. EXE
  {color: #ff0000} * 01/08/2003 17:03 2410a9v140.exe* {color 724 480}
  01/09/2003 09:32 250 663 biofca9t.com
  10/08/2002 05:26 30 697 chgbiosa.exe
  31/01/2003 08:36 1 087 instinfo.bat
  2002-05-13 15:25 378 175 launcher.exe
  31/01/2003 08:36 433 launcher.ini
  2009-06-05 00:17 0 list.txt
  31/01/2003 08:36 14 768 readme.com
  * {color: #ff0000} 31/01/2003 08:36 12 513 readme.txt {color} *.
  11 archivos 3 530 212 bytes
  3 dirs 9,404,600,320 bytes free

  And I got my first surprise here: there is a {color: #ff0000} * README. TXT * {color} that was not present in the file that I downloaded earlier from the repository of drivers.

  So I went the readme.txt and I found this:

  'README. CDC TXT 31/01/2003
  Flash BIOS version 1.40 for Satellite 1410
  -----
  This BIOS is applicable for the following models:

  Satellite 1410-S105
  Satellite 1410-S106
  Satellite 1410-S173
  Satellite 1410-S174
  Satellite 1410-S175
  Satellite 1410-S176
  Satellite 1415-S105
  Satellite 1415-S106
  Satellite 1415-S115
  Satellite 1415-S173
  Satellite 1415-S174
  Satellite 1415-S175
  Satellite 1415-S176
  Satellite 2410-S203
  Satellite 2410-S204.

  Please note that the model 1410-604 is * NOT * listed.

  I thought ' well, there must be another archive... ". »

  But then I realized a name that seems familiar, that is, in the directory where I unzipped this file 1.40, and the name is:

  {color: #0000ff} * 2410A9V140. EXE * {color}

  So I took the other file, the update of BIOS_Win, and I discovered that the name of the file is:

  * {color: #0000ff} 2410A9V140. EXE, {color} * (Ups!)

  So I once again, uncompressed to find:

  El volumen of the D unidad no tiene etiqueta.
  El n£ series volumen del mero are: 8838-E175

  Directory of D:\Shared\diskette\2410A9v140

  2009-06-05 00:43 < DIR >.
  2009-06-05 00:43 < DIR >...
  * {color: #0000ff} 01/09/2003 09:32 _250, 663_ BIOFCA9T.COM {color} *.
  2002-07-17 03:38 biosupd2.ini 35
  13/07/2001 13:22 6 277 chgbios2.vxd
  * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
  11/09/2001 09:14 134 clean2.reg
  2002-07-17 03:35 342 064 install2.exe
  2002-07-16 06:55 241 664 nchgbios2.exe
  18/08/2001 11:41 3 435 nchgbios2.sys
  23/10/2001 18:55 11 476 nchgbios2NT.sys
  26/08/2001 09:00 49 152 nchgbios2svc.exe
  13/07/2001-17:05 49 152 tbdecode.dll
  2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
  2002-06-21 11:25 1 796 tosclean2.bat
  11/09/2001 12:01 967 tosclean2.pif
  2002-06-21 11:34 toscleanAUTO2.bat 1 841
  2002-06-21 11:44 toscleanSMS2.bat 1 796
  2002-06-21 08:51 2 038 tosntclean2.bat
  2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
  2002-06-21 08:52 2 038 tosntcleanSMS2.bat
  Archivos of 20 bytes, 1 046 461
  2 dirs 9,402,793,984 bytes free

  No readme file...

  Then another issue raised in my mind: what happened to the other file 1.40? What did the other 2410A9V140. EXE are inside?

  This:

  El volumen of the D unidad no tiene etiqueta.
  El n£ series volumen del mero are: 8838-E175

  Directory of D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140

  2009-06-05 00:46 < DIR >.
  2009-06-05 00:46 < DIR >...
  * {color: #0000ff} 01/09/2003 09:32 _250, _BIOFCA9T.COM {color} * 663
  2002-07-17 03:38 biosupd2.ini 35
  13/07/2001 13:22 6 277 chgbios2.vxd
  * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
  11/09/2001 09:14 134 clean2.reg
  2002-07-17 03:35 342 064 install2.exe
  2002-07-16 06:55 241 664 nchgbios2.exe
  18/08/2001 11:41 3 435 nchgbios2.sys
  23/10/2001 18:55 11 476 nchgbios2NT.sys
  26/08/2001 09:00 49 152 nchgbios2svc.exe
  13/07/2001-17:05 49 152 tbdecode.dll
  2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
  2002-06-21 11:25 1 796 tosclean2.bat
  11/09/2001 12:01 967 tosclean2.pif
  2002-06-21 11:34 toscleanAUTO2.bat 1 841
  2002-06-21 11:44 toscleanSMS2.bat 1 796
  2002-06-21 08:51 2 038 tosntclean2.bat
  2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
  2002-06-21 08:52 2 038 tosntcleanSMS2.bat
  Archivos of 20 bytes, 1 046 461
  2 dirs 9,402,781,696 bytes free

  * {color: #ff0000} they have two 20 files and 1 046 461 bytes. I asumed that they are the SAME two folder {color} *.

  And the readme file does not list the model 1410-604 in its readme file, so I can't explain it except as a Toshiba error. * {color: #ff0000} they put an incorrect BIOS on their website and has proposed updating and somehow lead to such mistakes. {color} *.

  (Except in the case that one of these models is a name that is different from the model 1410-604, and if that's the case... now I don't know why this BIOS do not work with this computer).

  The worst thing is that neither the other files (V1.10, 1.20 and 1.30) lists the 1410-604, apparently so no solution possible workaround for this problem. I need an original v1.20 to the CMOS, and Toshiba seems to have. They offered me to solve the problem, leaving the laptop to an ASP, and pay only € 95 for the work and about € 280 for a motherboard replacement, I will get it resolved. But they offer no guarantees of their possibilities because is a model "too old" and "abandoned" and "unsupported"...

  In other words, they said 'you don't have to bother with it, just go and buy a new' (something of quite out of my reach in this time of crisis): P

  Thanks for reading so far.

  Now, what I need is to get ideas on a work around for this, my ideas are:

  (1) the CMOS has some startup that works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn in the CMOS memory, the SAME SAME model (a backup BIOS) but the backup should be sufficient for the burning program (CHGBIOSA.COM).

  (2) it is always possible that the BIOS might be OK, but the CMOS data has been corrupted somehow. If so, the CMOS of compensation could solve problem. But I wasn't able to find a clear cmos from the outside button, and after disasembling I took battery, with no good result. I try to leave the MOBO without battery for a period more long (I left it about 20 seconds) just in case where 20 seconds are not all capacitors for well pass zero values. I don't have a lot of hope in this point.

  (3) try to get a REAL good update from Toshiba. I contacted technical support several times, and I was able to verify that they are only - phone operators, with a script in front of them, and when the problem is going - out of reach, they fall in the same response: "you must go to an ASP. I still have a faint hope to find someone who really knows a little and could illuminate with a good BIOS in this disc.

  (4) as far as I could find, this BIOS is not any BIOS-manufacturer known. It seems that it has been developed by Toshiba (own brand), so the Phoenix crisis recovery disk won't be of any help here. As well as any other BIOS recovery tool not designed for Toshiba BIOS. But I'm open to all ideas, which could be put to the test more or less safely. (Remember that the 'BIOS-BOOT-PART' feature still works, I don't want to lose that possibility alone of redemption).

  Wwwaaaaoooowww... what a falks long post! Sorry about that!

  Forgive me, but I wanted to be really clear.

  Someone give some tips or advice will be greatly appreciated.

  Please don't say that I shouldn't be doing... I already know that. I already did some research and found my mistakes, not to repeat them. Now, I need to spend, to move and to try to solve this problem, or at least learn to solve similar things. As much as possible.

  Thank you once again, in advance, and sorry again.

  FenixDigital

  Post edited by: Fenix_D
  Modified subject to beter reflect what the problem is (apparently erroneous file BIOS in Toshiba Download Center).

  Hi Fenix,

  Wow... He tooked a lot of time to read your post...

  Maybe I can help you.

  The Bios in the website is the right one. If you have downloaded the right version of the Bios.

  Toshiba America, which has most of the time the Askiris you used isn't accurate models for Toshiba Europe.
  This should be the reason, why does not the readme file contain the European model.

  I'll try to do an update of the fresh Bios using the update of the traditional Bios.

  Copy the files on the disk, put it in the floppy drive, press and hold power on the notebook tab.
  After that the laptop is off, press on and hold the key on the left side of space power on the laptop new bar and wait until it turns off again.

  If your laptop does not power perhaps the most, the RAM is default?

  Therefore, if the use of the traditional Bios or change memory doesn't help, and your laptop is still dead you should go to a SPA, but it will cost money.

  I now have my fourth Toshiba laptop and I had never problems with the Bios updates.

  The 1410 is very old I think, so before you go to a SPA, I'd buy a new ;)

  Best regards

  Maurice

• Satellite Pro 4600: How to reset or remove the BIOS password

  Hello

  I forgot the password to my Satellite Pro 4600 BIOS.

  How can [1] I reset the password?

  [2] can update BIOS floppy be helpful for bios reset?

  [3] otherwise, you know another method?

  Kind regards
  Aloni.

  Hello

  1.) it of not possible to remove the BIOS password yourself.
  If you forgot the password of the BIOS, then contact Toshiba service partner in your country to remove the password.

  2.) each laptop has a BIOS procedure. You should check the Toshiba FAQ - How can I update the BIOS-
  Please check this Toshiba support page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=Direct_Support_e u

  But if the BIOS password you can not pass the BIOS. The password of the BIOS must be removed for updating the BIOS.

  3.) see FAQ

• In vain after BIOS update that isn't the Satellite A60 boot

  I have an A60 and I have a problem with it now.
  It does not work. I did a BIOS update and the machine turns off, so I then turned back on it and it is stuck in start mode and would have turned off yet again, so I removed the battery and it exploded.
  Now the machine does not start and no led will indicate.

  Please can someone help?

  HEY Warren,

  Usually, when a BIOS update is interrupted, it causes the CMOS become none-functional chip. This will result in the laptop being unable to start up so that the update can be tried again.

  The only option at this point is to take (or send) the laptop to authorized service center which has the necessary equipment for re-flashing the CMOS with the latest BIOS chip.

  Kind regards