Call of the unit managers

Similar Questions

• My browser is blocked for security reasons. Code error-QFR5000RT11C. My incoming connections in open State distance. Then I got the call from the United States 1 (866)986-3669, I picked up the phone, but they put the phone down. No matter what? Help, plea

  My browser is blocked for security reasons. Code error-QFR5000RT11C. My incoming connections in open State distance. Then I got the call from the United States 1 (866)986-3669, I picked up the phone, but they put the phone down. No matter what? Help, please.

  It's probably a SCAM.  Do not call these numbers.  Force Quit Safari and reopen it by holding down the SHIFT key.

  Ciao.

• Shows incoming calls to the United States instead of the city and the State

  IiPhone 6plus, IOS 10.  Incoming calls from unknown number of shows in the United States instead of / the State of the city. How can I fix this. Thank you

  Settings > general > language and region > region = 'United States'... assuming that is where you are.

• 999 calls to the United Kingdom

  Hello
  NOT BEING turned on to COUNT, but Skype calls to 999 based in the United Kingdom to connect?
  
  Thank you

  Yes, after this FAQ:

  http://www.Skype.com/en/legal/emergency-calling/

  You can also type in 999 (call it) in the Skype client software and can provide similar information.

• I want to register my phone with a chip from the Bahamas to make calls to the

  I want to register my phone with a chip from the Bahamas to make calls to the United States, but it is not an option. Is there a work around for another option? I have unlimited international calls

  Unfortunately, the SkypeToGo program is not available in the Bahamas.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• The unit 4.2.1 and call Manager Import/Export

  Is their way to export all the info of config CH and import it into another system of the unit? I have many servers of the unit who have pretty much the same configuration of AA and it would be much easier to import CH configuration on each server. Thank you.

  No, it's not an import/export tool just for managers. You can use DiRT to backup/import configurations all - some dealers make a backup of dirt of a generic facility with many managers to call for the configuration of audio text, but not (other than the default example admin) subscribers and then restore a dirt on new facilities in the area such as their General Manager configurations are present out of the box - this may work for you but is not a 'import' - it replaces the base the entire local system data, it adds not just call handlers to the existing combination.

• I am traveling to the United States to Australia next spring. I'll be able to use my iPhone AT & T 6 + for calls, texts and maps here?

  I am traveling to the United States to Australia next spring. I'll be able to use my iPhone AT & T 6 + for calls, texts and maps here?

  Yes, but it will be expensive as you will be traveling. Contact ATT to see what offers they offer when traveling.

• THE UNIT TRANSMITS NO CALLER ID INFORMATION. DURING THE CALL MANAGEMENT

  WHEN THE UNIT IS SET TO ASK CALLER TO CALL TRANSFER SETTING FOR A SUBSCRIBER... IT DOES NOT TRANSMIT THE CALLER ID #, SIMPLY SAYS THE CALL IS FROM A VM #. IS THERE A WAY TO UNITY BEFORE THE CALLER SOURCE ID #?

  Thank you

  STEVE

  No, it does not support this.

• Recommended method to configure the unit to reject calls to himself

  What is the recommended / best for the configuration of the unit to refuse or remove calls to itself?

  A situation like a TRAP to call on a phone that has the value CFA VMail.

  Thank you

  Vance

  By default, the unit will try to match the incoming calls caller ID to post numbers that you entered for each port in UTIM. Unfortunately, only the caller ID is not reliable. For example, if the unit transfers a call through a trunk or line of JUNCTION and the call is transferred to the unit, we expect to see the port of transfer as caller ID incoming. In this case, we don't want to dismiss the appeal. To handle this, the unit will only reject calls that have caller ID corresponding to a dedicated outdial port (which is a port that is not configured to answer and therefore to transfer calls). So to take full advantage of this feature, you'll want to first configure the outbound ports dedicated for Notification calls, traps and MWI. Then you'll want to make sure that these ports have post numbers entered for them the UTIM. Details of this implementation can be found in CSCdu64641.

  Of course there are always cases where the method above is insufficient. For example, if a call from notification of the unit died in a cell phone that is passed to the caller ID unit original (extension of the unit) may not appear when the transmitted call. In order to take account of cases like this, a new tone-detect basic functionality has been added to 4.0 (4). See the setting "Reject sent Notification DTMF Tone" in the Advanced Settings tool. Unfortunately, this will help with the Notification calls only. Trap the calls that you mentioned won't be affected.

  Hope this helps,

  Eric

• ISDB or Original called number used by the unit?

  Hi all - I wonder if you can help on something I'm confused in the course.

  When a call comes in the unit - which field unit uses to know what Voicebox to send the call to? And is there anyway to change the unit of it used the ISDB in the called party, or vice versa?

  Any information is appreciated.

  Kind regards

  Stuart

  When a call forward in unity, we get the latest issue of redirect from the TSP and it's that unity uses to search for box or voice call manager and load the greeting appropriate there. For a direct call in the call number is passed to us and we will try so connect to the mailbox assigned to this number (as applicable).

  You can use the call Viewer application in the warehouse of tools to see what values are passed to us in different scenarios.

  Currently, you cannot force a different value (i.e. the first number redirection on a forward or similar).

• Connection of the unit to record a call

  Looking for guidance on the installation and/or use of the unit CNX to allow subscribers to record a phone call.

  Thank you

  Connection supports the same type of record features direct, the unit done - there is an article 'start live recording' in routing rules that you can configure and call to register a call for the user box Conference in unity and use the record conversation direct who silently records the Conference and then leaves the record resulting as a message to the Subscriber that initiated the call.

  You can get more details on the live page account of the note here:

  http://www.ciscounitytools.com/App_LiveRecord_405.htm

• On the composition of the unit

  The unit I am putting in place where a caller can dial 0 for the operator, but when I put in place there is transfer to the operator's voice mail. I use the entrance to the appellant, choosing the 0 key, calling them to send to the Subscriber, select post operator, Conversion: attempt to transfer to. I also tried similar parameter and chose a Directory Manager. Please first let me know if it is possible and what I could do wrong. The help is greatly apprecialed as always.

  I use unity 4.0 (4)

  Thank you

  Forehand Tim

  Yes, it is possible. Most likely the Subscriber that you choose to send the appellant didn't transfer enabled rule / configuration to dial a number. Check the transfer on the Subscriber page and make sure that it is set to ring their phone (by default, forwarding is off, and the call proceeds to the users wishes).

  I'm not sure you're asking about regarding the handler directory - the directory handler didn't transfer associated rules...

  You can find the book 'Audiotext Applications in unity' on the page www.CiscoUnityTools.com Documents be useful here - it covers the details of how call flow through the system, particualy with managers/subscribers - it might clarify some things for you.

• 27 "+ monitor of type C in the United Kingdom?"

  Afternoon,

  Recently I've been looking for a more tidy installation my Mac Book Pro 15 "(rétine fin 2013)." I have the henge horizontal dock now, but my laptop constantly get hot (fan will nut) and when I run the mac and 2 external performance of the screens are terrible compared to the execution of installation even without the docking station. I don't know why.

  In any case, I was looking around and I see there is such a thing as a monitor that you can run with your MAC that acts as a host/HUB for the Mac Dock. And all via a single cable wired to the mac? Display port to a port of Type C 3.1 at the back of the monitor. So far I have found that a LG and acer have all two monitors type c. I chose is called Acer H277HU. Now here's the weird part. I can't find this exact model, which comes with a connection of type-c at the back, to the United Kingdom? In fact I can't find any available for sale in the United Kingdom the monitors who says anything about a port of type c in their specifications. This particular mode has a UK version but it does not have a port of type-c at the back of the monitor in the images or mentions a connection of type c in the specifications?

  Here, I'm a bit confused. These are simply not an option in the United Kingdom or something? I hope someone can help us with that.

  Why a port of type C, your Mac is not, is - this according to the Henge?

• iPad Air could not turn it on. Genius Bar called a "dead unit.

  Our meticulously cared for iPad Air we paid about $600 for 3 years it is abruptly stopped working last week. He was accused beautiful a day of work at 100% and would not regain power on the other.

  I initially it swept and plugged back in another take and gave him more than 24 hours to recharge. It is still not responding liked when trying to power on. I followed all the instructions online for the buttons power / home - try another loader on my iMac.

  Finally, I called the Apple store and make an appointment - thinking that it should be a simple solution / cheap. HA!

  The employee brought to the rear to run a test on it and back 5 minutes later to tell us there is no "common" found "is a unit of the dead". He said "it's irreparable, so your options are here" (pulling up the new iPads prices). Confused, I asked ' well... What is wrong with him? The battery? We can not just difficulty it?'. He said it could be the battery, a problem with the connector - anything, but said that it would cost $300 to fix, then we might as well just buy a new. He also said "you might be able to sell it for not much online, but I don't know what the retail value is a dead unit". Great customer service.

  Here, I thought that I invest in a good quality unit, shelling out the extra for 64 GB, etc. seemed worth it. Well, I can not yet wrapped my head around to be able to justify the replacement of something that can stop just "inexplicably" working on a coin, and there is nothing they can do.

  This is a user to user support forum. You do not discuss Apple here. What is your technical support question? The unit is, by your admission, 3 years old, two years outside of the manufacturer's warranty. You can either buy a new iPad as engineering explained, or you can buy a similar device in the form of a replacement under warranty for a discounted new, refurbished and with a 90 day warranty. The decision that belongs to you.

  Here is a link to the box that describes the costs for warranty replacements, depending on your exact device. iPad other repairs - official Apple Support

• using FaceTime outside the UNITED Arab Emirates

  I bought an iPhone 6s over 128 GB of Kabul in Afghanistan, but I have no FaceTime on it. When I google, I found that the iPhones in the UNITED Arab Emirates have no FaceTime. It's ok, but I want to use in Afghanistan should not be banned here. For your information, I use "SALAAM" SIM card and I did not even FaceTime its icon, but when I change my SIM to "AWCC", FaceTime application appear but I can't use it for any type of call. One of my fries told me that I can contact APPLE Co. and shares my serial number, you can turn it on remotely. FaceTime is too important for me as I've used most of my international call before by my iPad 3 and also the current macbook air. My iPhone information are as follows:

  Model: iPhone 6 sec more

  Storage: 128 GB

  CPU Model: TSMC A9

  iOS version: 9.3.1

  Thank you in advanced for you quick response

  P. S.

  In case of sending e-mail, you send an email to my gmail (*) due to I have some temporary problem with my apple ID email address.

  < personal information under the direction of the host >

  If you bought an iPhone from a country that does not allow the use of FaceTime, this feature of the software cannot be installed later, is not part of the firmware of the phone.

  Where you are not sure if the phone was sold in one of the countries that doe does not allow the use of FaceTime, put the phone back to factory settings and reinstall the original firmware. If FaceTime is still missing, after that, it can not be installed. Follow the steps in this article to:

  Use iTunes to restore your device to factory settings - Support Apple iOS