CAN bus reading NI USB 6259

Similar Questions

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

• How to connect USB 6259 so that I can generate trains of pulses of a meter

  Hello

  We just bought NI USB-6259 BNC. We used to use BNC-2110, which integrates the connectors BNC for trigger and the meter so that we can send trains of pulses through it to our electric Stimulator.

  However, I find no terminal BNC for the output of the meter on the new device. Could someone teach me how do?

  Thank you

  Jay

  Hi, Jay.

  Big question.  The screenshot below will give you the Signal of Counter/Timer associated with its respective PFI line:

  

  This table is located in the NOR-DAQmx help (using terminals of NOR-DAQmx devices"OR USB - 6259 BNC).

  To access these lines PFI one of the BNC (User 1 and User 2) user-defined, the line due to PFI line of the user desired.  For example, if I wanted to access counter 0 Out of 1 BNC user, I would wire pin 1 USER on pin 12 of PFI.  Manual specifications USB-6259 BNC does not give a good description of how to access the user 1 and user 2 BNC, so I refer to page 9 of the Manual of the BNC-2110.  It's the same idea, just different pinout.

  Let me know if you need more information.  I hope that you are having an amazing day!

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• The CAN bus activity: why can I not see my CAN bus activity using MAX and a NI USB-8473?

  I use an NI USB-8473 and Measurement & Automation Explorer on a CAN bus I know works.   He does not see as a traffic CAN bus.

  Any ideas on how to trouble shoot to find out why this material does detect any signals at all?

  DOH!

  We've all been there.  I'm glad you have work.

• I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

  I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?

  I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!

  -Corey

  You need a media player that is compatible with .mp4 files.

  The following preferential ticket should solve your dilemma.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• Whenever I insert a USB in my PC is not autoplay, I do not have available to all group policy, and I can't read or write CD/DVD

  Original title: "Autoplay, group policy and CD/DVD"

  Hello

  I have two questions actually worry,

  First of all, I have Windows Vista Home Premium Service Pack 1 installed on my PC

  My first problem is that whenver I insert a USB in my PC it doesn't autoplay and the option is not available at all even when I get clich the drive itself, I went Microsoft support and installed security update 950582 and still no hope. I also can't find the NoDriveAutoRun or NoDriveTypeAutoRun in the registry because I don't have the key explore in both policies.

  In addition, I have not available to all group policy.

  My second question is that I can't read or write CD/DVD even if I have the driver installed, I tried the DVD Microsoft repair but it shows that the repair failed.

  Thanks in advance and hope to receive a solution soon.

  SAS ING.

  Hi Sas Eng,

  There are a few solutions to the question of automatic playback on the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  And if the solutions provided for the DVD ROM Lorien did not help, as you say, it is probably a hardware fault.

  Try the steps are on the link and let me know if it helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB-6259 digital input READ

  Hi all

  I have to admit that I am inexperienced with DAQ cards (just do simple things in the past). We just receive the NI USB-6259. The plan is to use it for many tasks. One of them is a digital signal to measure at the maximum rate. So far, I have tried ti create a task in MAX - what I've managed to achieve was to measure samples of 500-700 to 1 Mhz using N samples measurment. In order to have 1 Mhz sampling rates, I use an external clock PFI12 (output meter 0 - I put the counter to generate 20 Mhz Signal - 50ns/50ns time Time High/Low).

  The thing is - it possible to obtain samples is acquired at 1 MHz with continuous mode? When I try with my current settings I get overrun error - I have tried task ru round trip - first clock generator started, then input digital. and the other way entry digital, first of all - so I guess that this overrun is not due to misuse.

  In the documentation it says:

  If the DAQ device receives a DI Sample Clock when the FIFO is full,
  it reports an overflow error to the host software.
  

  Is there another way to receive digital signals, where a picture lasts about 6 ms and consists of 8-bit?

  
  

• Device problem: "Master UDS Bus of Kernal USB driver software Bus by TCP is not installed. Looking for driver fails.

  New install of Win 7.  Control Panel >... > devices and printers: problem with the computer. Convenience store ran with results: "pilot of Master NODES Bus of Kernal USB software Bus by TCP is not installed. Looking for driver fails.

  Note: the only known problem I have is that I can't print to a printer USB connected in local (HP 5280).  Curious, the printer PC utility I can print a test page.  Microsoft Office 2007 apps, not printing.

  I get the same error message.

  It seems to be related to my D - Link DIR-655 Router and software (offered through D-Link) called "SharePort," which allows the USB port at the back of the router to use for networking!

  I have 5 PCs on my home network and printer. With installed Shareport, I connected my printer to the router via the USB port. I don't have to have the computer on it, I used initially to install the printer.

  To access the printer on any PC, I just have the icon in my taskbar.

  The error message is displayed because, by default, SharePort is closed and it reads it as "not installed"!

  I used it with Vista and Windows 7 Ultimate x 32 and x 64 with no problems!

  Just as with the 'coprocessor' "impossible to install driver" error message, I uninstalled them in (several times) Device Manager and the error messages no longer appear!

  So, in my case, the messages themselves were the only mistake!

  FYO: Coprocessor refers to hardware devices such as fingerprint security to access your PC, instead of a password!

  I hope this has been helpful!

• Satellite Pro M70 can't read 4 GB SD card

  I have a laptop Toshiba Satellite Pro M70 PSM76E and a 4 GB SD card. The laptop can not read the card. How can I do to work properly?

  Problem is that older models of laptops have problem reading last SD cards with a capacity still more and more. In my opinion it has not much to do. Maybe you can try to install the driver for some newer model laptop SD card reader. Perhaps driver for A100.
  I have too many M70, but I don't use SD cards. I prefer that USB keys because there is no any type of restriction.

  Good bye

• Mac Pro can not read SD cards more

  Hello

  I need help with a strong issue with my Mac Pro, who can not read SD cards more. Gluing of any player on any USB, an SD card is not recognized more. Strange also when I put a CF card in the same drive, it works and I can see the CF card on my desk.

  Someone at - it a response?

  (Mac Pro 3.1, latest El Capitan, several players used, same problem)

  What do say to recognize?

  Finder?

  Disk utility?

  System Profiler?

  OS X: about system information and System Profiler - Apple Support

  Have SD readers that you have linked?

  When it is connected with an SD card lists what System Profiler under USB?

  You should see the reader and the card.

• Satellite A100-775 - can't read memory stick pro duo of

  Can not read the Memory Stick * pro Duo * of my DSLR Sony to edit the photos

  Y at - it an update, or maybe a solution via USB-adapter?

  I put t have Memory Stick Pro Duo cards, but I looked in the user manual and the card reader supports SD/MS/MS Pro/MMC/cards xD and it looks like that the MS Duo Pro cards are not supported.

  I think you need to use an external card reader. I bought a Kingston external card reader and it works fine.

• Satellite A200 - issue USB ports - failed to read the USB

  I have a Satellite A200 series - and when I insert a dongle in the USB Ports - nothing is read or seen when I go via explores.
  In this case for an external mouse or my USB storage - yet it will recognize my Ipod when I need to recharge the battery.

  All of the suggestions, I'll be very grateful.

  See you soon

  Li Li

  Hello

  First of all, it would be interesting to know if you are using the OS preinstalled Toshiba.
  Second, you must check the status of the USB controller in Device Manager.

  I recommend you to unplug all external USB devices to the laptop.
  Delete all the USB root hubs and Device Manager USB host controllers.
  Then restart the laptop and wait until Windows will reinstall all USB ports again.
  Then you can plug in a USB mouse or USB again.

  Check it out

• How to read a USB-TC01 with VB6?

  I inherited a program existing datalogging, written in VB6, I want to extend to read my USB-TC01.  I never did any acquisition of data in VB.  Can you help me?

  I searched this forum and Web site of NOR and came up empty.

  Jim,

  You could do a dll in LabVIEW that reads the tc01, then call that since Visual Basic.  I have created/joint an example of what I mean, you can extend it to add the bells and whistles.  It should be fairly simple.  I hope it helps.

• CAN Bus Analyzer

  I have two USB-8473 linked together, "CAN_H" to "CAN_H", "CAN_L" to "CAN_L" both are connected to my USE Can Bus.  Contact CAN0 to UUT works.  Communicationg with CAN1 to works of the object to measure.  I get the message to update many of the UUT.

  However if I use CAN0 to connect the object to measure and CAN1 as a monitor 'listen only' by using MAX CAN Bus monitor, I see no data at MAX CAN Bus Monitor.

  Is there an arbitration that must be configured?

  There was a difference between my LabWindows and the LabVIEW program baud rate.  One was set at 100000 and one was 1000000.  The correct value is 1000000.  Everything works now.