can I connect hp slate 7 using wps on router

Similar Questions

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you

• I can't connect to my WiFi using windows xp sp3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  I can't connect to my WiFi using windows xp SP3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  On the side of my computer's mac, the internet works fine.
  I just want the computer to recognize my home network, but it's as if we want a modem connection.
  Ask what you need to know the specs.
  I do this to play Halo on my Mac.

  This is the problem (which I corrected).  It's simple, all you have to do is to switch to XP, insert your mac installation disc and follow installation bootcamp, with all the drivers for mac compatibility.  The wireless just popped up as active.

  I lost my, but this isn't a problem: just go to the apple Web site, use the express track, diagnose your problem and have a representative call you.  They answer in a few seconds.  Replacement CD is very cheap ($16-2011).  You can get the CD of requests for replacement, which is another $ 16, but it is not important; XP does not use it, only the operating system for the drivers.  Mine came very quickly, in just 2 days.

  Hope that answers questions from the Internet.

  Now to play online Halo with my FPS Pro controller! 8 D

• I can't connect to my office using WPA2 network. I was never asked to sign in with my credentials, is not just to connect.

  I have my Surface RT. I can connect to my WiFi at home and my Verizon myfi without problem. I can't connect to my office using WPA2 network. I was never asked to sign in with my credentials, is not just to connect. My Windows 7 laptop, iPhone and IPad allows me to enter my network credentials and I can connect to my corporate network. The surface is the only I've seen fail to ask my ID. I imported certificates of company company of my such surface as recommended by people of the support surface. I even created a login account for local access with the same user name and password, still no luck. Any ideas?

  If you right-click on the network so that in the range of the context menu has the option "forget this network". This will clear the credentials and appears the next time that you connect the dialog to enter credentials.

  Make sure you have the updates installed December and supposedly includes improvements on the wireless.

• How to connect Harman Kardon adapt using WPS

  I have a Harman Kardon adapt - whole House audio peripheral wireless which acts as a bridge to existing Hi-Fi - a bit like a bridge of Sonos. It will connect a wi - fi network using WPS. When I press the WPS on the Adapt, then use Apple Airport Utility 6.3.6 to add a WPS printer, it gives me an "error of connection Adapt" and then shows me Adapt MAC address. I can't ever it connects. Any help?

  Make sure that the name of the wireless network on your router AirPort is...

  ... In short no more than 20 characters in total

  Simple... use only normal and numbers letters... and not special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as...

  addict3 Red Apple wireless network

  Not going to have much chance to allow the HK unit to connect

  Try something ike

  addict3wireless

  Make sure that you have assigned a distinct name to the 5 GHz network... but using the 2.4 GHz for HK device network. If it connects to the 2.4 GHz network, then you can try the 5 GHz network to see if it can connect to this higher frequency signal.

  If still no luck, try to connect the device HK manually... not not using WPS

• Satellite Pro A40 can't connect to the WLan using the Win XP

  Hi all

  Newbie on your site so thank you in advance for your answers ;-)

  Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

  Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

  It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

  Any ideas please?

  Thanks Mike

  Hello

  First of all, you must update the WLan driver.
  I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

  In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
  If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

  Last but not least, you can try to use this command in a DOS (CMD)
  Ipconfig / renew

  Big names

• Can not connect with the FTP using NAT server.

  Hey, people!

  One machine in the net 200.2.2.0, with ip 200.2.2.222 (ftp client) must connect

  with a server FTP, using the ip 201.1.1.222 nat, but who can not connect.

  A newspaper using, serial interface, I saw the server response to the connection request.

  Using a different disconnection, in fas0/1 of the interface, I don't see the response from the server, I can

  not to see if nat has been done.

  Why?

  What's wrong?

  What can I do?

  To put this machine in another NET, 201.1.1.0 is so hard!

  Look, a router interface has ip 201.1.1.1.

  !

  interface FastEthernet0/0

  IP 201.1.1.1 255.255.255.0

  No cdp enable

  !

  interface FastEthernet0/1

  IP 200.2.2.2 255.255.255.0

  IP nat inside

  No cdp enable

  !

  interface Serial0/0

  Description INTERNET

  IP 100.100.100.30 255.255.255.252

  NAT outside IP

  No cdp enable

  !

  IP nat inside source static 200.2.2.222 201.1.1.222

  no ip address of the http server

  !

  Thanks in advance,

  Renato

  Hello Renato.

  also, it shouldn't make a difference, because your access list allows any last statement, try and add the following line to your access list:

  access list 103 permit tcp a whole Workbench

  access list 103 permit tcp any newspaper host 201.1.1.222 eq ftp

  --> access list 103 permit tcp any what newspaper of host 201.1.1.222 eq ftp - data

  access list 103 permit tcp any newspaper host 200.2.2.222 eq ftp

  --> access list 103 permit tcp any what newspaper of host 200.2.2.222 eq ftp - data

  access list 103 permit tcp any any 0 65365 range journal

  access-list 103 allow udp everything any 0 65365 Beach

  access-list 103 permit icmp any any newspaper

  access-list 103 permit ip any any newspaper

  Also, try to remove the access list together and see if that makes a difference...

  Kind regards

  GP

• I can't connect to the network using the Wi - Fi connection. In addition, the Device Manager is empty.

  Device Manager is empty and I can't make wireless connections more

  If Device Manager is empty, check article to see if it will be useful.

  Article number: 311504 - no items appear in the Device Manager list when you open
  http://support.Microsoft.com/kb/311504
  
  Perhaps because the service Plug-and-Play is turned off (disabled).

  Please reply back and let us know if that is the case.

  Thank you

• can only connect to internet access using wireless or ethernet cable

  I use a computer Windows Vista with Internet Explorer 8.

  When I try to connect to the internet from my laptop on a Netgear router I can connect only with limited access via an ethernet cable or wireless. My computer detects and attempts to connect (with complete connection) to the netgear router, but then the prompt appears on the screen, "connection takes longer than usual." Then, it displays "connection failure.

  I tried to use all the recommended solutions such as move the computer to a different location, automatically get new ip settings, etc... without success.

  In the past, I could access the internet without problems and the full connection and wonder if my college internet connection may have screwed up the settings.

  Thank you

  Hi Travis98,

  You can try to boot into safe mode with network and check if the problem occurs.

  Step 1: to start in Mode safe mode with network you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the lock button, and then click restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the Advanced Boot Options screen, use the arrow keys to select the safe mode with networking option and press ENTER. For more information about the options, see startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  For more information, you can consult the following link to start the mode safe mode with networking:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Please post back and let us know the results.

  Hope the helps of information.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry smartphones can not connect to livebox to use wifi

  Hi, my mother just got a curve 8520 so I tried to configure wifi on it for use with our orange livebox, my father and I have the same phone and I connected to the livebox with no problems, but I can't get it to connect.  I put the preshared key and press the pairing on the livebox, but he repeats to me it cannot authenticate and when I try to do it manually, it just says: it cannot connect. Confused!

  You have mac filtering on the router of the livebox?  You have enough available IPS allowed in the configuration of the router?

• Pavilion 14-n231TU: can I connect a monitor and use this screen as a monitor for my laptop?

  The name of my laptop is HP Pavilion 12-n231TU.

  I want to use an external monitor with my laptop.

  Is this possible?

  How can I do?

  #Reason - his only 14.5 inch display and can me not delight enough, when playing gamees with this small monitor...

  Waiting for answer

  Thanks bro. It has an HDMI output

• How can I connect to Windows without using a guest account active or know the user name password?

  original title: access Windows

  How can I access my computer from the Windows screen when I do not have an icon of comments and it won't recognize my password?  I have Windows 7 on my laptop but Windows XP on the PC that I can't access.

  Unless you have added a password for the built-in Administrator account, you can use this account to log in and reset the password of other users or creating new users:

  'Forgotten your Windows XP Home password? "- Part 3: define a new password as an administrator.
    <>http://support.Microsoft.com/kb/894902 >

  HTH,
  JW

• I can't connect my creative cloud using Windows 10 application

  The user name and password work fine in my browser, but when I connect to the application, it says "you have been disconnected. How can I solve this problem?

  Hi, Alix,.

  Please see the links below:

  Creative cloud sign me or asking to connect you several times

  "You have been disconnected" error every time I try to connect to the desktop creative cloud application.

  You have been disconnected - CC Desktop App

  Please let us know if you face additional problems.

  Kind regards
  Shelly

• How can I connect as a guest using the webcam pod?

  < rtc:AdobeHSAuthenticator

  id = »auth"

  username = "XXXX " "

  password = 'XXXXX' / >

  "" " < rtc:ConnectSessionContainer id ="cSession"" authenticator = "auth{}" width = "100%"

  " height ="100%"roomURL ="http://connectnow.acrobat.com/XXXXX""" >

  "" < WebCam:TouchWebCam width = "100%" height ="100%" id = "Web" sharedID ="peak" / >

  < / rtc:ConnectSessionContainer >

  Can someone tell me how to connect as a guest?

  Thanks for your help.

  BaBo,

  Hi babo,.

  I tried the same thing as Raff has proposed, and I don't see a problem. Can you double check the URL of your room. My code in the case where you want to try it

  Thank you

• I can't connect to my wifi using my hp 14-d008au...

  After I reformT my 14-d008au hp windows 7 lost my wireless connection...

  so I go into my device manager > other devices > unknown device > properties > details >

  hardware ID: AMDUSB30\ROOT_HUB30 & VID_1022 & PID_7814 & REV_0001 & SID_2191103C AMDUSB30\ROOT_HUB30 & VID_1022 & PID_7814 & REV_0001 AMDUSB30\ROOT_HUB30 & VID_1022 & PID_7814...

  what im going to do it please help tnx

  Hello:

  I don't think that the device has nothing to do with the problem but you need the driver for this device.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133028_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  The driver is installed for your wireless network card?